Wyniki wyszukiwania: mgn12

Sortowanie

473 modeli

P
PrintablesTechbeards

MGN9 & MGN12 Linear Rail 2020 Alignment Tools

Here you will find really basic alignment tool for 2020 profile with the MGN9 & MGN12 linear rails. Proper alignment of linear rails especially on a 3d printer is VITAL to help give your 3d printer the best chance of both working &…

Pobrania
3209
Polubienia
131
Ocena
5

Linear Rail Alignment Tool MGN7, MGN9, MGN12, MGN15

There are 2 versions: The regular, if you love simple things. The clip, more useful in vertical configuration, especially if you need it to stay fixed without holding it with your hands. Every stl contains both versions in order to limit…

Pobrania
2375
Polubienia
223
Ocena
4,93
P
Printablescbearman

MGN12 Alignment jig for 2020 and 3030 extrusions

Very simple alignment gauge for mounting an MGN12 on a 2020 or 3030 extrusion. Will work on any 20mm or 30mm T slot extrusion face. Put the linear rail on the extrusion with bolts fitted, place a few of these over the rail / extrusion and…

Pobrania
1814
Polubienia
86
Ocena
4,83
P
PrintablesMatvei

MGN9 MGN12 block/carriage disassembly helpers

Lets you slide the block off the rail and put it back easily. Tested them with Magicphoenix MGN9H and genuine Hiwin MGN12H blocks and they fit perfectly. Print as-is (on the side) with default settings and make sure you don't have an…

Pobrania
1107
Polubienia
85
Ocena
5
P
PrintablesShane Hooper

2040 MGN12 Linear Rail Alignment Tool

20mm x 40mm MGN12 Linear Rail Alignment Tool for the WorkHorse 3D Printer but this tool can be used for any 20mm x 40mm frame extrusion and MGN12 linear rail.

Pobrania
1025
Polubienia
77
Ocena
4,75
P
PrintablesKejar31

Ender 3 Stealthburner mount (MGN12 linear rail)

A remix of RepresentativeBlink mount for the Afterburner on an Ender 3 with an MGN12 rail, for StealthBurner also changed Added tie wrap holders to the top for cables Removed nuts that hold the two sections together and replaced them with…

Pobrania
1023
Polubienia
195
Ocena
5
P
Printablesw0nd4bra

2040 MGN12 Alignment Tool

Simple alignment tool to install MGN12 rails on 2040/4040 extrusions. Printed myself with PETG-CF , because I was lazy to change filament, but all other filaments should be fine. .STEP-file included, if you want to edit the model. If you…

Pobrania
961
Polubienia
75
Ocena
5
P
Printablesvale075

MGN12 rail-stopper/endstop

A rail stopper to screw to your 2020 extrusion at the end of your linear rail to stop the carriage from falling off. It needs an 8mm M3 screw. Remixed from the Voron trident design, and step/f3d file included for modifications.

Pobrania
892
Polubienia
77
Ocena
5
P
PrintablesKeemo

Voron Trident XY Gantry Conversion to MGN12H Rails

I just modded the XY Joiner for the Gantry to fit MGN12H Rails instead of MGN9C. WHY? Cause i don't have 9C Linear Rails in stock :) Just the lower part has to be changed, upper joiners still stock. Print Settings Supports: No Resolution:…

Pobrania
888
Polubienia
110
Ocena
4,83
P
PrintablesAmbrosia

MGN9 MGN12 block/carriage disassembly helpers with stop

A remix that adds a stop to one end of the rail. So the carriage can only be removed from one end, and will not fall off the other. Print on their side, as per the original. I found the MGN9 rail was slightly too loose, and the MGN12 was…

Pobrania
862
Polubienia
88
Ocena
5
P
Printables3DP and Me

MGN12H compatibility for EVA3

EVA3 dropped support for MGN12H and here I am adding it back in! Keep an eye out on www.3dpandme.com for full installation pictures and content. BOM: 4 x M3 inserts Support me by buying your dragon hotend (or any other 3d printer…

Pobrania
699
Polubienia
76
Ocena
5
P
PrintablesGulsifer

Dragon Burner MGN12H mount With and Without Klicky

this can be used on the Trident This Requires 2 M3 heat inserts in the Key to work properly. 3 M2 heat inserts for the pcb Klicky version This a Mount for the Voron Dragon Burner on a MGN12H. Can be used on any printer with the belts on…

Pobrania
692
Polubienia
71
Ocena
5
P
PrintablesEnderiusX

MGN12H Carriage Holder

Useful print to have when washing MGN12H carriage blocks in IPA in an ultrasonic bath or when you want to thoroughly clean/lubricate your linear rails without accidentally knocking the carriage off and having to pick up all the little…

Pobrania
679
Polubienia
45
Ocena
4,67
P
Printableskoehlr

MGN12 installation guide

This is a installation/allignment guide for MGN12 linear rails on 2020 extrusions. The fit is quite tight so there is no play when installing the linear rails.

Pobrania
677
Polubienia
41
Ocena
5
P
PrintablesKeemo

Voron Trident Z Carriage for MGN12H Linear Rails

Just remodeled the Voron Trident Z Carriages to fit MGN12H Rails, as i'm reusing some old parts for my build. Please NOTE THAT, Positions are all the same, nothing changes. As MGN12H Carriages are wider than your extrusion, you should use…

Pobrania
658
Polubienia
123
Ocena
5
P
Printablesgoth2k

MGN12 Rail and MGN12H Block objects with exact dimensions

These linear rail MGN12 and the block MGN12H objects with exact dimensions, are intended as help tools in prototyping and designing. There are 2 types of rails, one without holes, that can be elongated/stretched to any desired length by…

Pobrania
631
Polubienia
27
Ocena
5
P
Printablesnoob_42

Stealthburner Beta: MGN12H, CR-Touch, Creality Spider

::edits again:: So I've come across a much more elegant solution for the Orbiter 2 mounting setup @ https://github.com/elcrni/Voron-Mods/tree/main/Orbiter_2.0_SB_CW2_Enclosed I recommend this over the one in here. So skip the orbiter…

Pobrania
609
Polubienia
87
Ocena
5
P

SE/KE Speed-Plate/Adapter/Carriage Combo. Fits @NeedItMakeIt linear rails MGN12C/MGN12H

Tested on SE. Fits KE. Updated V4 with spot to attach your Input Shape Sensor (WARNING: this mod is not meant for beginners. Nothing wrong with being one but you might be over your head with this one. I am an experienced Machinist and…

Pobrania
547
Polubienia
129
Ocena
5
P
PrintablesLuka

Top for EVA 3 MGN12H

Top for EVA 3 MGN12H instead MGN12C. For sensorless homing.

Pobrania
525
Polubienia
29
Ocena
5
P
Printablesdiogo coelho

ENDER 3 NEO MGN12H DRAGONBURNER/MINI STEATHBURNER MOUNT WITH CR-TOUCH

This mount is made to accept a dragonburner/mini stealthburne for ender 3 neo printer with linear rail in the x axis. Print with minimum 4 wall and +40/50 infill you can go 100%. Height of cr-touch can be changed when you want . Made an…

Pobrania
515
Polubienia
93
Ocena
0

Linear rail block lube carts: mgn7 mgn9 mgn12

You can use a screw and nut in the top hole to secure the cart for storage https://a.co/d/5vAbloZ I used these grease nipples. I needed to heat the nipple and screw it into the cart. might need to make the threads bigger

Pobrania
494
Polubienia
64
Ocena
5
P
PrintablesKA

MGN9 and MGN12 alignment guide (for 2020 and 2040)

My own version for aligning MGN rails. MGN9 and MGN12 version for both 2020 and 2040 extrusions.

Pobrania
487
Polubienia
23
Ocena
5
P
Printablescovertpluto3502

Voron 2.4/Trident/ Mercury One X carriage BLTouch MGN12

A simple way to mount a BLTouch to voron 2.4/trident/ Ender 5 Mercury one X mgn12H version IMPORTANT: it is recommended to wrap the bltouch in some kapton tape and use a silicone sock to reduce heat transfer to the bltouch

Pobrania
475
Polubienia
42
Ocena
5
P
PrintablesResset

REV2 Anycubic Vyper MGN12H Y-axis Linear Rail kit

It's my take of linear rail kit I've designed for my Anycubic Vyper. The kit includes the left and right MGN12H mounts that replace the V-roller bearings and original Y-axis endstop mount for 2020 extrusion. [UPDATE] Through some changes…

Pobrania
473
Polubienia
71
Ocena
5
P
PrintablesIzFunk3

Dragonburner MGN12H Eddy mount

This remix allows you to easily mount an Eddy probe on a Dragonburner toolhead. I used Chirpy's 'Carriage_Base_Short' as the base for this design, making adjustments to fit the probe securely. It keeps the probe at an optimal distance for…

Pobrania
457
Polubienia
56
Ocena
0
P
PrintablesAtomique13

MGN9 and MGN12 carriage helpers with stop and lube

Use 1xM3 screw from your rail or carriage to secure the carriage in place for store or lubing.

Pobrania
451
Polubienia
42
Ocena
5
P
PrintablesJohnOCFII

MGN12 Linear Rail Plug

Very simple MGN12 Linear Rail plug Can be printed in most any filament. Example is in PLA. Also great in a semi-flex TPU. This is printed in 0.25 layer height with 0.4 nozzle. 0.20 or 0.30 also works well.

Pobrania
448
Polubienia
44
Ocena
4,5
P
PrintablesMacroMoray

Duender MGN12H Edition

My take on the Duender by Sergei Irbis. This version uses MGN12 linear rails with H size bearing blocks and adds mounting points to use end stops if you prefer those to sensorless homing. For the configuration I used, you will need the…

Pobrania
441
Polubienia
76
Ocena
0
P
Printablessquirrelf3d

Dual linear rail mount MGN12H - Ender3pro, 3v2 and 3max (and other with 40x40 Y profile )

You'll need four M5x12 and eight M3x6 for the linear rail block (M3x8 might work too, not sure) To install it, partially screw in the screw into the hex nut (use the stock ones) to lift the nut, and place the mount over the rail block…

Pobrania
434
Polubienia
90
Ocena
5
P
PrintablesBenditandsendit

Dragon Burner MGN12H/12C mount w/Beacon probe - *UPDATED*

******************************** Update: I've added a cut out to mount an end stop as I personally need one and I like having the option available for others :) ********************************* This is a remix of Gulsifer's wonderful…

Pobrania
416
Polubienia
64
Ocena
0
P
PrintablesWiggyWooSaa

VZBOT Printhead for MGN12C VCORE3 CPAP

Update (15.06.23) - Now works with the Orbitor, you will need to print Orbitor Bottom Back Brace Orbitor Filament Sensor Orbitor Top Back Brace Orbitor EBB Mount Update - I have added an additional version of the base (withgantrybase),…

Pobrania
413
Polubienia
76
Ocena
5
P
PrintablesGX1400

CR-6 SE Y-axis Linear rail and MGN12H carriage mount

CR-6 SE Y-axis Linear rail and MGN12H carriage mount This conversion method DOES require you to replace the Y-axis belt, but unlike some other projects doesn't require you to cut the rail. Required Supplies: 2x 350mm long MGN rail with…

Pobrania
406
Polubienia
56
Ocena
4,5
P
Printablesjonspaceharper

MGN12 Linear Rail Endcap

This is a pretty straightforward design. It covers the end of your linear rail to both align it during installation and prevent the carriage block falling off accidentally. There are two files, they are identical with the exception of the…

Pobrania
402
Polubienia
39
Ocena
0
P
PrintablesSabLei

mgn12H rail + carriage

It started by finding the original model of the “ Heat Insert Press ” by BaGooN, which I really like! since I still have some iglidur i150 filament lying around, I thought, hey why don't print the rail and the carriage by myself? but the…

Pobrania
401
Polubienia
33
Ocena
5
P
Printablesduffwv

MGN12 Linear Rail Alignment Tool for 2040 extrusion

MGN12 Linear Rail Alignment Tool for 2040 extrusion

Pobrania
401
Polubienia
21
Ocena
5
P
Printableswilly2406

MGN12 Rail Stop

Simple and easy. I use the no-screw version, but if you prefer to make it with “ceinture et bretelles”, use the screw version with an 16mm M3 screw and a T-nut. Nothing special to print these things, I just used supports from buildplate…

Pobrania
391
Polubienia
32
Ocena
5
P
PrintablesJohnMartin

BIQU H2 Mount - Linear Rails (MGN12H) - Updated

UPDATE - Included new (untested rear plate). I wasn't very happy with the clamp version to hold the belt. This is more HeroMe-ish. If you try it out, please let me know how it works. I have one ready to test but I just haven't had the…

Pobrania
389
Polubienia
41
Ocena
5
P
PrintablesStany

Creality K1C / K1 / K1 MAX - ROOT FREE linear rail gantry for stock / powge ( MGN12 MGN9 and 2GT 1.5GT )

Lets save our K1s :-) This is my linear conversion for X axis. Every version i found was complete makeover. Not this one. This is cost effective coz you reuse most of your stock hardware. Designed for STOCK or POWGE idlers. No software…

Pobrania
367
Polubienia
104
Ocena
5
P
Printables6d6178

Prusa MINI Linear Rails MGN12 - Y Axis

This is a remix of the Prusa MINI Y Axis Linear Rails Mod by Ryper3D that I re-created from scratch from the original Prusa MINI Printable Parts with the following differences: Clean and pleasant aesthetic. No personal logos, crazy lines,…

Pobrania
366
Polubienia
121
Ocena
4,73
P
PrintablesIconic FAB

MGN12 rail block assembly tool

ABOUT MGN12 RAIL BLOCK ASSEMBLY TOOL Precise, printed rail block assembly / servicing tool for MGN12 linear rail carriages. In short - this will allow not to drop your balls :) SUPPORTED RAIL BLOCK CARRIAGES MGN12H; MGN12C Printed Parts…

Pobrania
364
Polubienia
70
Ocena
0
P
Printablessyph3rd

Zero G Mercury - E34M1 - Top MGN12H with Inbuilt Limit

I didn't want to buy limit switch PCBs, so I designed an upper mount with an inbuilt limit switch

Pobrania
349
Polubienia
30
Ocena
5
P
Printables3Dtech

EVA 3 MGN12H Top

I wanted a design to fit an MGN12H rail that I have on my custom printer so I thought I'd alter the existing top on EVA 3 to accommodate both MGN12C and MGN12H

Pobrania
341
Polubienia
29
Ocena
0

Ender 3 X axis backplate mgn12h linear rail

Remixed backplate to add extra strength, holes for nylock m3 nuts, and flush cap head screws for the linear rail.

Pobrania
332
Polubienia
35
Ocena
3
P
Printablesgregington

Heat set insert press for 2020 extrusion , MGN12 and MGN15 rail

Remix of thrutheframe 's excellent MGN9C heat set insert press for MGN12 and MGN15 rail. I originally designed this for MGN12 rail, thinking I had some spare. It turned out I had MGN15 and so redesigned the parts for that size. Both C and…

Pobrania
328
Polubienia
69
Ocena
5
P
PrintablesMK2000

Sovol SV05 MGN12H Linear Rail Adapters

Replace the V-Slot-Rollers on your Sovol SV05 with MGN12H linear rails using these adapters. The belt tension on the Y axis will increase slightly with this mod, but this shouldn't be an issue. You will need some additional hardware to…

Pobrania
320
Polubienia
57
Ocena
5
P
PrintablesTzach

Creality Ender 3 / CR-7 X Endstop - fits with MGN12 linear rail

X Endstop for Creality Ender 3 / CR-7 made to fit with mgn12 linear rail

Pobrania
315
Polubienia
46
Ocena
0
P
Printableshakancez

BMG V6 ABL MGN12H Direct Drive System for Ender 3 and Clones

Minimal print area loose. No end stop adjusting... This project is based on SK-Tank CF BMG Dual 5015s Mount by declinox. https://thingiverse.com/thing:5182358 ) I find his design while looking a project for “MGN12H rail system, BMG…

Pobrania
312
Polubienia
79
Ocena
5
P
Printableshangloose

Anycubic Vyper / X-axis Linear Rail, MGN12H

Stückliste: Linsenkopfschrauben oder Zyl. Für den Halter 2x M5x8 Für den Schlitten 4x M3x6 Für die Winkel 6x M3x8 Für die Winkel 6x M3x14 Einschmelzmuttern 7x M3s Einschmelzmuttern 2x M5s Linearführung MGN12H…

Pobrania
307
Polubienia
59
Ocena
5
P
PrintablesFlying Bonanza

Linear Rail Adapter (MGN12H) for Micro Swiss Direct Drive for Ender 5 using CoreXY Belts

This is a printed adapter to mount the Micro Swiss Direct Drive Extruder for Ender 5 on a MGN12h linear rail carriage that utilizes the CoreXY belt configuration on the Mercury One.1, Voron 2.4r2 and maybe others. When doing the build,…

Pobrania
299
Polubienia
49
Ocena
5
P
Printablesrph

Dragon Burner V8 MGN12 mount with beacon probe.

Shout out to @Bendandsend_757774 for originally designing this MGN12 mount for the Dragon Burner.

Pobrania
296
Polubienia
37
Ocena
5
P
PrintablesLamrith

MGN9 & MGN12 Linear Rail 2020 Alignment Tools V1.2

Liked the original, wanted easy way to identify the different models, so I added inset text identifying each one.

Pobrania
288
Polubienia
17
Ocena
4
P
PrintablesKirill_Maker

mgn12 rail to 2020 profile center protractor

Yet another simple mgn12 rail to 2020 aluminum profile centering protractor. All tolerances have made to have "tight" fit on rail and profile (if you have normal calibrated printer of course ;) )

Pobrania
281
Polubienia
23
Ocena
4,67
P
PrintablesZen3Dlab

MGN9C/MGN12H adapter

required hardware: 4pcs FHCS M3 5mm 4pcs M3 square nut (5,5mm x 5,5mm x 2mm) Zen3D

Pobrania
275
Polubienia
27
Ocena
5
P
PrintablesExerqtor

Voron Trident-R1 MGN12H rear Z carrier

MGN12H rear Z carrier for Trident-R1 CHANGELOG 01.05.2023: WobbleX - Opened up the center hole (where the leadscrew goes through) too 13mm to allow for more leadscrew movement without interfering witht he carrier body. 25.04.2023:…

Pobrania
254
Polubienia
62
Ocena
0
P
PrintablesUltrazauberer

Ender 3 simple linear rail (MGN12H) endstop for x axis 2020 belt tensioner

The stopper has a M4 counterhole. Simply mount it on top of the cheap 2020 belt tensioner. Now the carriage can't leave the rail anymore. On the other end of the rail sits the x axis endstop to do the same. The model was designed around…

Pobrania
254
Polubienia
42
Ocena
5
P
PrintablesJCPhlux

Heat Insert Press for MGN12H

Same as Heat Insert Press by BAGooN but modified to use MGN12H linear rail. This is a compact heat insert press that utilizes a 150mm linear rail with MGN12H block that is avalable on amazon. Follow BAGooN's instuctions as the only…

Pobrania
251
Polubienia
50
Ocena
5
P
PrintablesFlying Bonanza

Linear Rail Adapter (MGN12H) for Micro Swiss Direct Drive for Ender 5 using Stock Belts

This is a printed adapter to mount the Micro Swiss Direct Drive Extruder for Ender 5 on a MGN12h linear rail carriage that utilizes the stock belts If you are looking for an adapter using CoreXY belt config, check here:…

Pobrania
243
Polubienia
27
Ocena
0
P
Printablesskyme

Endstop mount for MGN12 linear rail

You can slide it on the rail and fix it with the screw from the top. The 2 other screws fix the endstop pcb. Just use M3 BHCS screws. If screws go in too hard, drill the holes a bit bigger or use a M3 thread cutter.

Pobrania
234
Polubienia
34
Ocena
0
P
PrintablesLilMikey

TronXY X5SA MGN12H Linear Rail Upgrade (Direct Drive or Bowden)

This is a gantry conversion kit for the TronXY X5SA 400. It should work with the other X5SA models however you'll need to adapt the length of the linear rail (450mm for X5SA 400). Check out the installation video here:…

Pobrania
233
Polubienia
33
Ocena
0
P
Printableshangloose

Anycubic Vyper / Y-axis Linear Rail, MGN12H

Die Y-Linearhalter sind ein Remix von: https://www.printables.com/pl/model/169489-anycubic-vyper-mgn12h-y-axis-linear-rail-kit?fbclid=IwAR2GCK7LIJAdjURp8Q7YlXN_zA7_29ol_zSFM_jpIRnWyBzvQ_V145M47dc Stückliste: Linearführung MGN12H 2x…

Pobrania
233
Polubienia
39
Ocena
5

MGN12 Linear Rail Alignment Tool - CR-10

Hello, we are MAKERS DEVELOPMENT GROUP and this is our 3D printed alignment tool specifically for mounting a MGN12 linear rail the side of a 2040 aluminum extrusion. Perfect for mounting linear rails on the Y-axis of a CR-10. Please visit…

Pobrania
227
Polubienia
29
Ocena
0
P
PrintablesTDX3D

MGN12 Rail Stop

Heavy Duty linear rail stop for MGN12 rails. Easy to print and compact, these use a M3 screw and m4 t-nut to secure it onto the rail. This will be a tight fit but works nicely. Category: 3D Printer Accessories

Pobrania
226
Polubienia
18
Ocena
5
P
PrintablesGuyishGuy

MGN12 Carriage Holder

Rotate -90 on X for proper print orientation

Pobrania
223
Polubienia
11
Ocena
5
P
PrintablesC0D3Man

DragonBurner MGN12C Mount for Ender 3

Re-aligned the holes to correctly fit the MGN12C Block. Redesigned to work with Ender 3 belt system.

Pobrania
220
Polubienia
42
Ocena
0

Dragon/Rapid Burner MGN12H X Carriage with Angled Belt Exit

I remixed Chirpy's original MGN12H X Carriage model to add some mount points that interface to the bottom “feet” of Chirpy's PCB Mount for the Sherpa Mini for extra toolhead rigidity.

Pobrania
218
Polubienia
14
Ocena
0
P
Printablespellcorp

MGN12 Alignment Block for 2020

I printed in PLA in default orientation, I added 5 walls but left everything else the default.

Pobrania
218
Polubienia
24
Ocena
5

MGN12 Alignment Tool

EDIT: UPGRADED MODEL: https://www.printables.com/model/478752-parametric-linear-rail-alignment-tool-mgn7-mgn15 Very easy and fast print to get your rail perfectly aligned with the aluminum profile. There are 2 versions: the simple one,…

Pobrania
217
Polubienia
19
Ocena
3
P
PrintablesTzach
Pobrania
211
Polubienia
24
Ocena
0
P
Printablesqwertymodo

Improved Ender 3 Stealthburner mount (MGN12 linear rail)

This model is a slight remix of Kejar31's Stealthburner mount for the Ender 3. Changes include: Added toolhead “foot” to make alignment of the toolhead easier and more rigid Added threaded insert holes instead of self-tap holes to hold…

Pobrania
210
Polubienia
42
Ocena
0
P
Printablesxp1ratex

LGX adapter for VORON MGN12 X-carrige

Did a remodel of the LGX 2-part adapterplate since i didnt like the screws going from behind, (behind the cablechain) and they vibrated loose after 1-2 rolls of filament. Removed the e3d fastener in the bottom, removed the old AB ducts,…

Pobrania
208
Polubienia
23
Ocena
0
P
PrintablesHabit

T1H2 Printhead for MGN12 Rails / RatRig Vcore

a new Version of my T1H printhead design for the RatRig V-Core 3 using a MGN12 carriage and a billet main plate. Rapido, Beacon and Orbiter 2.0 on the comparison picture you can see a EVA printhead, T1H and the new T1H2 printhead short M3…

Pobrania
199
Polubienia
32
Ocena
5
P
PrintablesRyper3D

Prusa MINI upgrade hiwin Linear rails (Y mod) MGN12

This is our first mod for Prusa MINI, mod for upgrade Y axis to linear rails, tested with approved selftest. -With Multicolor Frontal. BOM -Rails hiwin MGN12 280mm (x2) -MGN12C (x3) 4x DIN912 M3X10 (For the ends of the guides) 4x DIN985…

Pobrania
195
Polubienia
56
Ocena
0
P
Printablesminimal3dp

Ender 3 Stealthburner CW2 Cr Touch Mount for MGN12

ENDER 3 STEALTHBURNER CW2 CR TOUCH MOUNT FOR MGN12 (v1.6) This is a remix of Stealburner and Clockwork 2 Mount for Ender 3 With MGN12 Rail You'll need a few things to make this work: (10) M3 x 4 heat set inserts (2) M3 x 40 mm cap head…

Pobrania
195
Polubienia
37
Ocena
0
P
PrintablesRainerBavaria

Lubinator – MGN9 / MGN12 Dual Rail Lubricator

Der Lubinator wird einfach auf eine handelsübliche Spritze gesteckt und ermöglicht eine gezielte Schmierung von Linearschienen , wie sie häufig in 3D-Druckern und CNC-Maschinen eingesetzt werden. Dank der zwei integrierten Schmierkanäle…

Pobrania
193
Polubienia
102
Ocena
0
P
Printables3dKaos

Prusa Bear Linear Rail MGN12H Stealthburner X-Carriage

Modified X-Carriage for Voron Stealthburner Toolhead Severely bastardized x-carriage for this wonderful Prusa Bear Linear Rail mod by @Thehead Starting parts for the carriage mod came from @Sebastian - I used his carriage he made for the…

Pobrania
184
Polubienia
33
Ocena
0
P
PrintablesCJHMDM

Zero G Mercury - E34M1 - Top MGN12H with Integrated Limit Switch (remix)

Remixed for my Ender 5S1 Mercury One.1 with a 235x235mm bed.

Pobrania
182
Polubienia
18
Ocena
0
P
PrintablesDziobaasty

Voron 2.4 carriage MGN12C+Euclid+ Endstop X

My mod for voron 2.4 Carriage for MGN12C with euclid mount

Pobrania
179
Polubienia
29
Ocena
0
P
PrintablesJEBurroughs

X-Axis Z-Axis MGN12 Linear Rail MOD for Ender 3, Pro, V2 and Voxelab Aquila Includes my FANG DUCT MOD

This started with a linear rail X axis mod I did for the Aquila. I have since added Direct drive versions and for stock wheels. Found here https://www.printables.com/model/332268-voxelab-aquila-x-axis-mgn12-linear-rail-conversion. This…

Pobrania
178
Polubienia
34
Ocena
5
P
Printables6d6178

Prusa MINI Z-Axis Brace for MGN12 Rails

This is a remix of the Prusa MINI Z-Axis Brace by Brolin Workshop with clearance for MGN12C blocks that I re-created from scratch for using with the Y-Axis Linear Rails Mod . It is inspired by a similar remix by Ryper3D . The following…

Pobrania
177
Polubienia
47
Ocena
5
P
PrintablesHobbybotics

MGN12H Y-Linear Rail Heat Bed Mount (Ender 3/Pro & CR10/S Style Printers)

I took design inspiration from the Printer Mods Y-Linear Rail kit. This design fits Creality-style printers that use their heat bed mounting scheme. The gantry frame mounts to the brackets with M5 screws and washers. Mount the brackets to…

Pobrania
176
Polubienia
25
Ocena
5
P
Printablesthisiskeithb

Creality Ender-3 Y-Axis MGN12H Linear Rail Mod (Older Style)

Note: This is for the older Ender-3 printers with the flat/z-shaped front Y idler bracket. Here's the mod for the newer style with the U-shaped front Y idler bracket. The original design placed the belt too close to the frame which caused…

Pobrania
171
Polubienia
20
Ocena
5
P
PrintablesSirStorm

Stealburner and Clockwork 2 Mount for Ender 3 With MGN12 Rail

These models allow you to attach the Voron Stealthburner toolhead with Clockwork2 extruder to an Ender 3. They replace x_frame_SW_left/right and the [a]_Belt_Clamp_SW_x2 from the main Stealthburner files. I modified the parts to use Voron…

Pobrania
168
Polubienia
27
Ocena
4,75
P
PrintablesYanooStar

Voron Stealthburner - MGN12H with BL-Touch and coverage (new 2023)

Material: ABS / ASA /PETG Infill: 40% Supports: No Top/Bottom Layers: 4/5 Wall Line Count: 2/3 Italiano: Questo progetto permette di installare il Bl-Touch all'interno del carrello, con una copertura per proteggerlo dal calore English:…

Pobrania
165
Polubienia
30
Ocena
1
P
PrintablesCardGameCove

Ender 3 V3 SE/KE Y Axis - MGN12C RAILS

Remix changes the Bed Plates to fit the smaller MGN12C rails

Pobrania
159
Polubienia
32
Ocena
0
P
PrintablesDr.Einstein

XOL MGN12H Mount for Anycubic Vyper and Creality Ender 3

I reworked the original XOL Toolhead mount to fit on an anycubic vyper or similar printers. I have also added a mount for a BL-Touch. Works for the low XOL-Toolheads like for Phaetus Dragon or Bambu Hotend. Clamps have been fitted to…

Pobrania
159
Polubienia
34
Ocena
0
P
PrintablesFump

EVA 3 - Universal MGN12 Top Mount

There was no MGN12 H option from official website, so I made universal mount for both types of MGN carriage

Pobrania
158
Polubienia
11
Ocena
0
P
PrintablesCiareCw455

Z Axis MGN12H linear rail conversion for Artillery X4 Pro - X4 Plus

Actualización 22-12-2024: Añadido última versión en formado step. Soportes para guías lineales Eje Z MGN12H de longitud 400mm. Necesario comprar: Guía lineal MGN12H + Carril 400mm (x4 pro) 28 T-nut M3 ( sujeción guía lineal al perfil ) 8…

Pobrania
157
Polubienia
25
Ocena
5
P
PrintablesRyan _

KP3S 3.0 DRAGON BURNER MGN12C MOUNT

Mounting bracket for dragon burner on MGN12C linear rail with X limit switch stop bar. Modified mounting holes for MGN12C hole distance. Moved them down a bit as well, so you can access the dragon burner mounting screws from the rear of…

Pobrania
153
Polubienia
22
Ocena
0
P
PrintablesFreddy

Ender5 S1 CoreXY Mod (MGN12, NEMA 17)

You need mosty M3 bolts like any voron does, a few M3 nuts and a few extrusion nuts and M3 heatinserts. For the CoreXY part you need MGN12 rail (I used 350mm on Y and 300mm on X), A about 1m long GT2 belt and 24 F623RS bearings. THIS DOES…

Pobrania
153
Polubienia
39
Ocena
0
P
PrintablesJR

Ender 3 Y-Axis Cover for MGN12 Linear Rails (V2/V2 Neo/Max Neo)

Mount limit switch with two M3 x 6mm (or 5mm) button head screws. No supports are needed if printed as shown.

Pobrania
151
Polubienia
26
Ocena
0
P
PrintablesHobbybotics

MGN12H Y-Linear Rail Limit Switch Bracket (Ender 3/Pro & CR10/S Style Printers)

I noticed the original Y-limit switch bracket on Ender3/Pro style printers was not appropriately aligned to make contact when mounting linear rails to the extrusion. Additionally, I noticed that I lost about 10mm of print size on the…

Pobrania
149
Polubienia
26
Ocena
5
P
PrintablesFlo

Ender 3 MGN12C Gantry

While searching for Duct Fan / Tool Head upgrades to my two Ender 3 I only found models with the original gantry. Since one of my printers is going to have a MGN12 rail with a MGN12C carriage all base parts needs to be modified. I made…

Pobrania
149
Polubienia
18
Ocena
0
P
Printablesandreip

Creality Ender-3 V2 X-axis carriage adapter for MGN12H top mount

Design goals: re-use with minimal hardware changes the original parts (except the fans assembly/shroud, see below) minimal number of printed parts extremely simple design of the printed parts Carriage adapter has large (10 mm) sides for…

Pobrania
145
Polubienia
21
Ocena
0
P
PrintablesTurge

Voron 2.4 Dual MGN12 Rail Install Guide

This tool is required for adjusting the front and bottom rails on the Voron 2.4 X Gantry. It can be used for adjusting rails while the cable chain is already installed. Category: 3D Printer Accessories

Pobrania
144
Polubienia
10
Ocena
0
P
PrintablesD3v1n3

Linear Rail Guide 4020/4040 Centre Alignment MGN12

Guide for mounting an MGN12 Linear rail in the centre of a 4020 4040 extrusion. Print top down, 0.2 layer height, no support. no build plate adhesion

Pobrania
144
Polubienia
5
Ocena
0
P
Printablesoidium45

Ender 3 Dragon Burner MGN12H Mount

The original author of these files uploaded a STEP file which required isolating the mount then saving each component as an STL. I have done the work for you.

Pobrania
143
Polubienia
23
Ocena
0
P
PrintablesGabor

VZ-printhead adapted for VCore3 + stock MGN12C + Orbiter 2.0 + Rapido UHF + CPAP

Its a heavily modified version of the ingenious design from Vez3D, exclusively for the VCore3 with the stock MGN12C rail

Pobrania
143
Polubienia
17
Ocena
0
P
Printablesthisiskeithb

Creality Ender-3 Y-Axis MGN12H Linear Rail Mod (Newer Style)

Note: This is for the newer Ender-3 printers with the U-shaped front Y idler bracket. Here's the mod for the older style with the flat/z-shaped front Y idler bracket. The original design placed the belt too close to the frame which caused…

Pobrania
142
Polubienia
33
Ocena
5
P
PrintablesJakeblue0

Rook 2020 Y Carriage MGN12H

This mod will add a 2020 aluminum extrusion to your Y carriage. This allows you to mount your rail onto the extrusion and will give additional support to your Y carriage. Needed Hardware 1 150mm 2020 Aluminum Extrusion (for normal size…

Pobrania
141
Polubienia
22
Ocena
0
P
Printableshadri420

MicroSwiss direct drive MGN12 carriage adapter for voron switchwire (ENDER 3 CONVERSION)

A little adapter for MicroSwiss direct drive users who want to mod their Ender 3/3pro (or any clone) for a switchwire conversion, this project contains all the files for the stealthburner mod including the front plate, the hottend cooling…

Pobrania
140
Polubienia
22
Ocena
0