214 modeli
The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…
Design The base is tilted by 14 degrees, which enables the optimal ejection of ground material. The tilting angle also helps to remove all the grist from the grinder. In addition, clogging of the chute is prevented. There is a platform at…
The updated original finecoar Grind Setting Dial V2.1 for all new Eureka Mignon grinders Print if yourself?! The finecoar GSD V2.1 is fully open source under CC BY-NC 4.0 DEED and the printable files are available on Printables and…
Design The Eureka Mignon is a fantastic coffee grinder for espresso or Aeropress as well as filter coffee or French Press. It has only one flaw: The grind is well adjustable, but not well READJUSTABLE. The dial can be adjusted over…
The dosing cup holder has a recess for a self-adhesive silicone pad to allow a gentle triggering of the switch by pushing on the dosing cup. The diameter and height of the silicone pad are 8 mm and ~2.5 mm. Printed with PLA.
This is a tilted base for the Eureka Mignon Grinder lineup. I only have access to a Eureka Mignon Crono, so can not vouch for the other variations (e.g. Specialita etc.), but as far as I understand, they are all the same dimensions. I was…
I recommend to print the tray in PLA or better in PETG (so it wont deform if it gets washed under hot water) with an infill of at least 15% and a layer height of 0.2mm. Update: Thanks for your feedback and sharing your makes! :) I made a…
I was on the search, for a suitable tray for my Eureka Mignon coffee grinder, so that the dirt does not arise everywhere
Remix for the "Silenzio" version of the Eureka Mignon grinder (no screw adapter)
Battery dispenser for 17 AA mignon batteries. I was inspired by the great design from adoniram with his version of a battery holder thing:1004996 . But I had trouble with stucking batteries so I decided to design a complete new one which…
Remixed to make useful with a Eureka Mignon on a tilted base. It may also be useful for people who want the holder to retain the dosing cup more securely without a tilted base. Have also included a version for different size dosing cup…
Inclined Base for the Eureka Mignon Series The Stand is tilted forward by 9deg to decrease retention just like the new Eureka Mignon Single Dose Grinder. It precisely fits on a Prusa i3 MK3S (with skirts turned off) The front is designed…
Design This 60mm single dose hopper for all newer Eureka Mignon models (Specialita, Manuale, Silezio, Facile, Filtro, Puristico. XL, Perfetto and Libra compatibility isn't tested, if you have any questions feel free to contact ) allows,…
The default hopper that comes with the Eureka Mignon grinder is quite big and badly designed for single dose grinding. This hopper fits snuggly in the enclosure. It's also one of my first prints, so any improvements are welcomed. I'll…
This base model is the best I could find. I only added a hole to reduce the printing time. At 18% infill the stability is not affected
The Eureka Mignon MCI Single Dose Stand is a practical and efficient accessory designed for coffee enthusiasts seeking precise and consistent single dosing. For coffee enthusiasts who value precision and consistency in their brewing…
A simple drip tray for the Eureka Mignon Specialita Coffe grinder with some pegs to “click” it into the screwholes at the bottom front of the coffee grinder.
A remix of the "Uni knob" from @ordnerino that makes it possible to use the Grind Setting Dial with the original knob
Make sure your walls are thick and consider printing slightly hotter than usual for better layer bonding. The top rim can be a little temperamental, but holds firm once the grinder is in place
Original mount will be used to fix it to the machine. v2 for steeper angle and button activation with the dosing cup itself by pushing it in Added version for Delonghi dedica users
I never used and didn't like the Eureka Mignon's hopper gate, so I removed it right away. Just to find out that the resulting hole is big enough to scatter ground coffee all over the place. This print fits snugly around the hoppers throat…
MOAB - Mother of all Bellows or Massive Ordnance Air Blast: A bellows and dosing cup combo designed for the Eureka Mignon grinders. Designed by Amahoola and me. Demo Video: Features: Functions as dosing cup AND bellows, at the same time!…
Simple titled base for the Eureka Mignon Specialita with optional tray to catch stray grinds. No magnets or anything fancy like that - although I have included recesses in the bottom of the base and tray for optional rubber feet, so that…
Simple sliding portafilter holder for the Eureka Mignon Crono. Should work on newer Mignons. I only tested this on the Crono. This is tall enough to minimize grind spray. With magnetic dosing funnel, you should be able to slide this…
Design This plug covers the hole created after the portafilter fork has been removed to grind into a cup or similar. If you'd like to buy a finished product visit my newly made store :) Details Uses the original screw that came with the…
The old one was broken, so i made a new one in Fusion360
Ein kleiner Adapter, um Mignon-Zellen statt Baby-Zellen verwenden zu können. Druck im Vasenmodus, mit 0,8 mm Linienbreite. Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Rafts: No Supports: No Resolution: 0,2 mm Filament:…
This ring fits directly on your stock dial like this ring for the first version. The advantage is a smoother dialing experience since you dont have a 3D-printed thread. to tighten up, i used a M3x6 screw, but it still sticks out. you can…
I designed a funnel for my ECM Espresso machine, which fits into a default E61 brew group. The E61 brew group is the most common type found in almost every larger espresso machine. I created this design to work with the Eureka Mignon…
Die Auffangschale hält den Platz um die Kaffeemühle sauber. mit PETG gedruckt Ich habe auch die entsprechende stl-Datei hinzugefügt
Coffee funnel for my Eureka Mignon & Lelit PL81T 57mm carrier, should fit fine for a PL41TEM. The side-opening fits the eureka outlet nicely, lets you press the button and you can leave it on when using the tamper. The default inner…
ENGLISH : The character has flexible, articulated legs, allowing it to be posed, displayed, or used as a small decorative toy. “This model is ideal for Easter decorations. The file is designed for a clean and simple print. Perfect as a…
Design This 100mm single dose hopper for all newer Eureka Mignon models (Specialita, Manuale, Silezio, Facile, Filtro, Puristico. XL, Perfetto and Libra compatibility isn't tested, if you have any questions feel free to contact ) allows,…
This is a Fine Grind Setting Dial for Eureka Mignon MCI There are some for newer models but not for MCI, so i decided to do one for MCI which I Own. Gear Ratio is ⅓ so with 33 on Knob and 99 on Main Gear, dial scale is divided to 160.…
Cute unicorn figurine - Mignonne licorne. Generated from BambuLab MakerLab. The 3mf file is 4-colors for Bambu Studio. If you download it, please like. Update 05/05/2025 : Refined 3mf file for less filament changes
Base requires support Print Lid with logo facing build plate
A full single dose kit is expensive, and 3D printed bellows are not good. I bought some high quality, yet generic silicone bellows from Aliexpress for 8€ and modeled this to fit them. Printed with no infill, 3 perimeters, and PETG. I…
A larger knob with 100 markings making your dialing process much easier. Use double-sided tape to attach the arrow to the grinder body. Also, you can adjust the knob size and markings lengths using the OpenSCAD file included, just change…
This design allows you grind directly into the portafilter. It reuses the original portafilter fork. You will need an m3x3 insert
This is my take at a 58mm Cup Holder for the Smart-Grind-By-Weight mod by jaapp (https://github.com/jaapp/smart-grind-by-weight) The cup fits nice and securely, leaving enough clearance. The cup holder slides over the load cell and screws…
OK coffee geeks, here's a twist on Eureka’s brutalist art deco style, in 3D-printable kit form. The Eureka Mignon series is one of the best value grinders in the market, but it’s a multi-dose design. Many home baristas single-dose shots…
An improved and newly designed bellow for https://www.thingiverse.com/thing:4703218 See images for print settings in Prusa Slicer: 1a. Set perimeters to 2 (0.4mm nozzle), No top layers, 6 bottom layers 1b. Disable perimeter checks 2a. Set…
First print “Label” on printbed, do not touch or cooldown bed. Now print the knob on same area. After print is finish, cut down the overhangs. Print the indicator model, paint the line and glue it with double sided tape on your favourite…
Originally sold by BaristaByDesign on Etsy (that's me), I've decided to pack in making and wanted to release the model for everyone to use. Make sure the walls on your print are nice and thick and bond well to one another. Consider…
This project is based on the AEG Mignon Model 4 typewriter (1923). The first model of the Mignon was designed circa 1901-1903 by the German company AEG, and subsequent versions found some popularity in Europe as an affordable alternative…
J'ai voulu créer un cerf trop mignon avec des grands yeux plein d'étoiles. J'ai aussi créé une version avec une écharpe parce que parfois il fait froid. Si tu aimes cerf aux grands yeux, pense à m'envoyer une photo (soit en makes, soit…
A socket, which is compatible with common Mignon AA or Micro AAA batteries. Each contact interface features an input for a banana plug. I primarily connect this piece to a multi meter to gain a simple easy to use battery tester but I'm…
Larger grind adjustment knob for Eureka Mignon to help fine tune grind
Use paint on supports for the protruding part of the pushrod. The rest of the model is support free. Organic support works great.
I didn't like the existing versions of the incline Stand, so i made my own. Its light in filament use and has a vibration dampening mat. Its 9° inclined and has a cutout in the middle. 2 walls and 20% infill is enough, do more if you want…
This is just a remix of the remix from user 'Tyler_3D_Prints' on ‘Thingiverse’ of the bellows attachment for the Eureka Mignon Single Dose mod from user "rmanalan". I made the 'roof' slightly thinner (+/- - 50%) as it was unnecessary…
An attachment for the portafilter - 70mm inner diameter.
Just a dosing funnel fitting on Quick Mill Espresso Portafilters with three notches with a cutout to suit Eureka Mignon and similar Grinders
printed in K1C fully enclosed with white eSun petg oriented as shown without brim or supports
I don't use the platform and cup, but it better when the machine is tilted.
This is an adapter for the Eureka Mignon Notte coffee grinder to hold the Flair Classic 48mm "Bottomless 2-in-1 Portafilter". It works best with the "filling funnel - standard" attached to the basket. Note that you need to re-use the…
This design is heavily inspired by the design of Eric Chu on Thingiverse (his wasn't long enough for me; half the grounds flew over the tray). Should also fit the Mignon Silenzio and Perfetto. Please check measurements before printing.…
A bottomless portafilter holder for Eureka Specialita with a 68.5 diameter. The part can screw in the exististing holder for the fork.
I've seen a lot of models for the exact same purpose and most were pretty awesome, but something made me want to design it myself. So while not being a remix of a specific model it surely incorporates ideas seen in other models. Feel free…
With this funnel, you can insert the portafilter of the De'Longhi Dedica into the Eureka Mignon Libra and grind without the coffee grounds falling beside it. Then tamp with the filter still on. Thus it is possible to grind coffee with…
This stand for the Eureka Mignon coffee grinders features a 14-degree tilt. Installation requires only the original screws and the existing strain relief – only a new cable tie is needed. The conversion should only be carried out by a…
Multi-print system to convert the bean chute into a single dose hopper column that a single dosing cup with bean blocker gate fits into. This system allows easy measuring of a single dose and placing onto the chute as a hopper, and can be…
My Eureka grinder didn't come with a portafilter holder or the metal bracket to attach one. This builds on the model by @LegendaryCheez_87484 to replace the bracket with the following changes Tighter fit. Presses in snug and reduces…
Seems that there are existing dozens of Eureka Mignons… was not sure if the existing bases are compatible with my grinder and so I created my own. Nothing fancy, 10° tilt towards you. I post some pictures of my grinder. If anyone knows…
I've been working on this for about a week or so. I now have a perfect working prototype after my fourth design iteration! I wanted to design a portafilter holder/base that blends in (almost) seamlessly with the profile of my mignon…
Since I was getting tired of holding my portafilter in place while it was doing its grinding thing, I thought I could invest 12 hours to design a gadget that holds my portafilter for me and saves me 12 seconds. Such smart. Anyway, Im…
For manufacturing you will need disk-shaped neodymium magnets, 3mm in diameter, 2mm in height. In the photo there is an option with six magnets, but now it seems to me that the option with ten magnets works better. The attachment contains…
A simple piece that allows the single dose forks from the original model to fit on a Mignon Manuale. Uses the standard screw that comes with the grinder to attach the original fork. The fork here…
🟥 Parfait pour l’impression FDM en couleur ou en mode monochrome, ce modèle nécessite peu de supports. Faire attention en retirant les supports sur les parties fragiles. Ce petit ankylosaure à l’air paisible, mais ne t’y fie pas : sa…
These two pieces form a portafilter holder that fits a Eureka Mignon Manuale grinder. They may also fit other variants of Eureka Mignon grinders, so if you try them out and they fit, please leave a comment or post a make so that I can…
I raised the base to place my dosing cup right in front of the chute
Yet another Eureka Mignon tray. The first version is pretty straight forward. 90 degrees angles etc. I made the version 2 for TPU so it is a tighter fit that more or less snaps into place. Printed with 0.6 nozzle
Version(s) V1.0 - 15Nov24 - Initial Design ---- Description Bottomless portafilter holder & tray combo. Slides back and forth a little to aid with pressing the start button. The recess at the back will stop any vibration that makes it…
in the hole 1 put an “Schlossschraube” M8x80
My Eureka Mignon Grinder has a (printed) base with 15° tilt to reduce it's retention, but my dosing cup kept sliding out of the holder often. This holder has a long neck to position it near the exit chute of the grinder, adding a negative…
Simple 58mm cup to catch the grinded coffee. The base is 3 parts, due to mountig ot on the grinder. The original fork is covered in the print. To activate the grinder one pushes the complete plate/cup up. Please use some colorfull…
A no-mess dosing funnel for Eureka Mignon coffee grinder to use with 58mm portafilters.
I like a lot original model by @ordnerino - however, I don't have transparent tube, so I just made hopper a bit longer.
To allow for normal and decaf beans I created a hoppper based on the original that comes with the Eureka Mignon ORO XL. Instead I put a wall between the middle and some tabs to control the flow of beans from each section. Note: it may fit…
Since the dial from the „ Grind Setting Dial V2.0 “ was so hard to turn I looked for sleeves but there weren‘t any for the specialita, so I modelled my own version to fit the gears. Now I can use the original dial, which runs a lot…
Instead of adding a large knob this print adds a small indicator that points on a painted scale to show ten sub steps per grind size. To install the indicator the rubber seal below the knob should be pulled up slightly so that the…
Heyyyyyy, Je continue dans ma série des créatures imaginaire dans votre plus grand bonheur ! Je lance cette série uniquement en MultiCouleur pour plus de beauté et d'originalité ! J'atteste que tous les fichiers on était tester et imprimé…
Eureka Mignon Fork Remix Upgrade your Eureka Mignon grinder with this custom fork designed for use with a tilted bed in single-dosing operations. This remix of TrafficBroker's original design ensures a secure and precise fit for…
The Zero is the “single dose” version of the ubiquitous Eureka Mignon coffee grinder series. The overall build quality of this grinder is great and it quietly (and quickly for home use) produces fluffy, consistent grounds day after day…
Tilted Base for Eureka Mignon grinders with magnetic 54mm cup
The Eureka Mignon Stark is a very nice grinder, but as with many on-demand grinders a lot of coffee grounds misses the portfilter and ends up below the chute. This tray will reduce the need for sweeping the counter top and will keep the…
Eureka Mignon Stark compatibility
This is a 9.5 degree tilt which I felt is about the limit whilst ensuring the beans still flow easily. The bottom has 4no. 8.2mm inserts for 8mm rubber pads.
Upgrade your Eureka Mignon grinder with a single-dose hopper and bellows for precision and convenience. Designed for minimal retention and maximum freshness, the compact hopper accommodates single servings of coffee beans, ensuring each…
I use a 15deg stand for my eureka mignon MCI grinder to reduce grind retention within the grinder but want to keep the ~ 220g hopper. I designed this adapter to counter the 15deg stand and use the standard hopper. I printed mine with…
The original model is a fantastic idea, yet I it lacked the PCB holder. Instead of adding a tilted stand to your grinder, just replace the original base. As a benefit, the button is moved to the front left, which at least for me is…
I first printed W0lf92's Knob Sleeve, but quickly realized that it didn't quite work for me. The Knob did grind away my original indicator on the right frontside of my mill and also pushed down my Grind Settings Dial (v2), so it's lid…
Catch spilled coffee grounds - designed to fit the Eureka Mignon MCI grinder: https://www.coffeecircle.at/de/p/eureka-mignon-mci-espressomuehle
printed in K1C fully enclosed with white eSun petg oriented as shown without brim or supports
Three-piece stand that angles your Eureka Mignon coffee grinder 15° forward. Print in any material, PLA may deform with time but has held up for years for me in this application. Use four M3 screws and nuts to attach the feet to the base.…
Worm drive for Eureka Perfetto grinder. The 1:60 ratio allows for fine tuning, much better than the original direct setup knob. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.1mm Infill: 40%…
When the ground coffee was blown out, the finest coffee particles were distributed around the grinder. As a result, a fine film of coffee dust has formed on the work surface. To avoid this, I designed this attachment for the dosing cup…
Hi, this is my version of a Knock-Box to perfectly fit my Eureka Mignon Specialita Coffee Grinder. In addition, the knob for the drawer is a re-creation of the Rocket “R” Letter. Note: I Printed the Knock-Rail in two steps. The outside…
Instead of having the Knob completely replaced this is a sleeve for the original knob. it keeps the style of the original knob except for the white inlay. You can tighten the fit further with a screw inserted from the side.
A lid for a single dose hopper I found on printables: https://www.printables.com/model/227273-single-dose-hopper-for-eureka-mignon-grinders I embossed the text slightly which makes it easy to paint in slicers. If you don't want to have…
![[finecoar] Grind Setting Dial V2.1 for Eureka Mignon](https://media.printables.com/media/prints/777304/images/6039888_4ce2cf05-2e19-4e57-b1fe-74c1b6c4f185_63bb1ffc-94d1-4e5a-895f-4ec86adb5f53/right_round.jpg)
