Wyniki wyszukiwania: mixe

Drill Paint Mixer

Use 3 walls, 25% infill. A simple drill-powered mixing attachment designed for stirring paint, coatings, resin, pigments, adhesives, and similar liquids directly inside cans or containers. The mixer attaches to a standard drill and helps…

Paint Mixer

This is a two part stirrer, the stirrer itself and the shaft. You'll need an m5 bolt (40mm or so) to screw the stirrer into the shaft. You can customize the shaft length by non-uniformly scaling the X axis longer. I printed the shaft…

Wave Puzzle 7 (Remixed)

Remix of "Wave Puzzle 7" by ThinkingPegasis. ( https://www.thingiverse.com/thing:3739933 ) Changes and/or improvements over the original: Thicker pieces Pre-flipped a few of the tiles to not give the solver a hint based on the surface…

Paint mixer - 100% printable - no support - optimized orientation

Paint mixer - 100% printable - no support - optimized orientation Flawless mixing: High-vortex paint mixer for perfectly blended, streak-free paint in seconds. Easy to clean. Both parts are securely joined by a short 16 mm piece of…

Flour Funnel for KitchenAid stand mixer

Happy Thanksgiving - Make those Holiday Recipes with ease with this Easy to add dry ingredient funnel to your mixing bowl while the mixer is running (or not). This offset funnel has a tool accessory post to mount onto the KitchenAid…

Remixed Under Desk Shelf - Squared - Hex Bottom

I wanted to speed up the print time and save some material so I made the hex holes bigger.

Foldable Phone/Tablet Stand (Remixed for large phones/tablets)

This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…

Paint Mixer / Stirrer (remix)

Paint Mixer - remixed from https://www.printables.com/prints/171895-paint-mixer to give it more robustness on the shaft element. TinkerCad file: https://www.tinkercad.com/things/6CBctKDDngC Shaft diameter increased, base/propeller…

Concrete Mixer

Put it on your table or make it mobile by using 4x lorenkrampe to mount it on G scale log car wheelbase ( https://www.printables.com/de/model/335862-log-car ) How to build it: Put gestell2 into the slots of gestell1. Push Schwenktrieb…

Paint spin-mixer drill attachments

These are two paint mixing drill attachments that will use the power of your drill to mix spray can paints/primers, as well as model paints. They are inspired by one of Adam Savage's favorite tools: The spray-can mixer model can accept…

Epoxy or Paint Mixer

I designed this mixer to fit into a 10mm chuck. The total length is 160mm and the base diameter is 57mm. recommended material is PETG, with 25% infill and 3 Perimeters. Edit Added a second slightly bigger and improved version, with…

Dual Korg Volca Stand (Remixed to support 2 Korg Volcas)

Remix of the Korg Volca stand by beejums . This version of the stand will hold 2 Korg Volcas. Additional supports/parts are not required to keep the Korg Volca's in place. Print 2 and slide onto each side of the devices. Originally…

Paint mixer

Cut appropriate length of M6 threaded rod or smooth rod with 6mm diameter. Make sure the rod is straight, otherwise everything will be wonky. You can simply screw the mixer on the threaded rod, with a smooth rod you might be required to…

Remixed Double Hook 3m Command Strip

A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.

KitchenAid Mixer splash guard

I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…

Little beton mixer truck - Malý domíchávač

[EN] Sometimes it happens that a visitor comes with children who are bored and need some entertainment. In this case, simple and easy to print toys come in handy, where the child will have fun both watching them print and playing…

Ultimate Concrete Mixer Truck

I wanted to model a somewhat cartoonish version of a concrete/cement mixing truck. They're my favorite kind of trucks. FEATURES: Fully printed bearing wheels (they are very loose but they roll and spin!) Handle for spinning the barrel…

Small Audio Mixer Stand

This is a a stand I built to elevate a small 12 channel audio mixer, Behringer 12 XENYX. If you print this using the stl files, you will need to create two sides with one mirrored. Don't worry about cleanup, the little bit of elephant…

Paint Mixer / Stirrer

Tired of mixing paint or epoxy by hand, use this tool. Designed to be used with a 6mm threaded rod

KitchenAid Mixer Card Holder

This is a remix of deslucht's KitchenAid Model, separated parts on Thingiverse: https://www.thingiverse.com/thing:4705694 . The print file is arranged to enable a filament color change. Unfortunately this orientation uses more supporting…

Cleat Pedals - Clip into Shimano Road Bike Pedals - Remixed for Shimano SPD-SL PD-R550 and 105 PD-R7000

This is a remix of https://www.thingiverse.com/thing:3669328 . I've gotten permission from the original creator to post this remix. I've made a simple edit to the STLs to remove the raised edges from the bottom to allow compatibility with…

5V UPS LX-2BUPS module remixed for USB C

Converted the original authors STLs to STEP with freecad and then modified to fit a USB C output connection. It's not perfect but it's functional.

Kitchen Aid Stand Mixer Attachment Holder for Wire Rack Remix

ReMixed Andrew Burkhart's KitchenAid Mixer Attachment Holder which was a remix of tacoh's Shelf Bracket. Resized for 1 inch wire spacing on the wire rack, made the bases a bit thicker and added a backstop to the top piece. Printed in PLA…

Remixed Mounts for Vertical LED Light Bars for the Prusa i3 MK3s/MK3s+

I printed in 0.03mm DRAFT in PETG without an issue. I recommend using the Gyroid fill pattern, but you do you. I really liked the simplicity of the vertical light bars that Dennis created (https://www.prusaprinters.org/prints/81952), but…

Parashift: cable travel adapter for mixed shifting

Ratio-changing pulleys are a wonderful hack for bikes. For non-electronic drivetrains, they allow bending the rules normally requiring a stringent pairing of shifter, derailleur and cassette families. Also called travel agents or…

Stirrer, mixer

I needed to mix the paint in a 25 liter barrel. The narrow neck of the barrel did not allow the use of conventional stirrers. That's why I designed a thin stirrer, which can be inserted into the narrow neck of the barrel in a helical…

openGrid Standard 90 Degree Angled Conenctors (Remixed from KYZ Design Angled Connectors)

Two-way and three-way 90 degree connectors for openGrid regular/standard, based on the designs by KYZ Design (see remix links). Original angled snap-in connectors were aligned for use with openGrid heavy, and while they do work with…

Bike bottle holder with a hidden slot for Airtag REMIXed for Canyon Exceed CF6

bottom part REMIXed for Canyon Exceed CF6

remixed and BEEFED fidget keychain

So I printed this original for my son and he really wasnt that satisfied with it. His complaints were that it was uncomfortable to use because of the direction the 2 main wheels spin towards and away from each other. also he didnt like…

Magnetic Lid with Filling Slot for KitchenAid Mixers

Magnetic lid tailored specifically for KitchenAid mixers (4,3 l bowl). This unique accessory not only ensures a snug fit to prevent spills but also comes with a convenient filling slot, allowing you to add ingredients seamlessly while…

Spirit island town with windows and doors (remixed)

Town token in Spirit Island board game.

Multi-Tool - This contains the G-code file only -- Remixed for true multi-colour printing

This only contains the G-Code for printing on a Prusa Mini/Mini+ Added true multi-colour to the model, so that the bottom portion with the text prints completely flat without debossed text and uses a separate colour for the text on the…

Remixed ball joint bracket for camera mount to Radiomaster MT12

I wanted to mount stuff to the top of my Radiomaster MT12 radio, either for filming and being able to operate the controller two handed (it takes practice!!) or just to mount an FPV screen. Or maybe both??!! Hey, I'm just providing…

Remixed 0.05mm Resolution Dial Calipers -

This only contains the gcode for doing a true multi-colour print on a Prusa Mini+ "0_0.2mm_PLA,PLA_MINI_1h30m.gcode" does a true multi-colour print for the first two layers. Start with the filament for the main body colour loaded. Then…

Tamiya 23ml Paint Adapter For Vortex Mixer

This is an adapter for Tamiya 23ml paint bottles. It will allow the use of regular Vortex Mixers.

(Remixed) Beehive-Inspired Floral Arrangement Vases

This model was created by https://www.prusaprinters.org/de/social/119334-fortinmike and remixed by AJD.

Spojka na převodové víko mixeru SHB01 Sencor SHB 436 x ...

Spojka na převodové víko mixeru SHB01 Sencor SHB 436 x ..., čtvercový tvar

Leatherman Wave Holder Remixed

The original design was great, IS great, but over time when printed in petg the sides start to warp apart. They also catch on things at the worst times possible. SO. I've remixed the design to tighten up the belt loop just a touch, and…

Hues and Cues Fence, remixed for 0.6mm nozzle and dual color

0.6mm nozzle 9 and 10 mm number height, Helvetica Rounded font sticking out 0.6mm from wall.

Z-Axis Movement Visualization (Remixed to support colour change for arrows)

Remix of existing model by TC . Arrows extruded from main body in order to support layer colour change in PrusaSlicer for non-mmu colour changes. G-code files have supports, colour change enabled and 2 objects. Matching X-Axis model is…

Spice Jar Anti-Clog Lid with Rotating Mixer - Improved Spice Dispenser Cap

This anti-clog lid was designed for many common glass spice jars and solves a typical problem: spices often only come out after aggressive shaking or tapping. Compatible with various spice jars including: Kania (Lidl) Le Gusto (Aldi)…

Cremo Beard Brush Case (from Remixed box)

Beard brush case for Cremo Brand beard brush for travel or other storage purposes. This is a resized remix of Vlado Turek's small box with hinge that they uploaded to Printables… It is a simple print that can contain a standard Cremo…

Babycook Duo mixer blade lock

This little bit is designed in Fusion360, based on original part. The Babycook mixer has two rooms and on lock is lost somewhere so I modeled and print new one. The model is simple but its necessary to use supports for the ring and for…

Silvercrest Hand Mixer & Whisk Holder (Lidl)

This 3D printable holder offers an ideal storage solution for your Silvercrest Hand Mixer and its whisk attachment. Designed with precision, it ensures each component has a dedicated and secure place, allowing for proper organization and…

Connect 42390556 Mixer Coupler - Spojka motoru a čepele tyčového mixéru

Printed successfully on MINI+ from recycled PETG with 100% infill. Works magics.

Super Mario Thwomp Remixed for Prusa MK3S+ Extruder FUN

After playing Super Mario World on my RetroPie , I noticed something … The heatsinks on my 3d Printer looked a little like a Thwomp . So, with that in mind, I set out to modify our Prusa MK3S+ extruder to look more like a Thwomp from…

2T Fuel Mixers

Simple measuring cups for most used oil to fuel ratios. Select desired ratio, fill the cup to the line with two stroke oil and pour it into your fuel tank or canister (one cup per one liter of gasoline)

příruba na skleněný mixer sencor

Příruba na skleněný mixer sencor (foto je jen ilustrativní) Vyrobeno pro známého, typ přesně nevím.

Remixed Headphone Holder - fits 48 mm cubicle wall

Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled

Rods for Little Angels toy mixer

Replacement rods for toy mixer. Made my daughter's day, as the original broke. Support recommended, print in high resolution, such as 0.15mm layer height, and 20-30% infill to ensure enough strenght.

Držák příslušenství Mixeru SilverCrest SKM650 A1

SILVERCREST® Multifunkční kuchyňský robot SKM 650 A1, šedá https://www.lidl-shop.cz/SILVERCREST-Multifunkcni-kuchynsky-robot-SKM-650-A1-seda/p100306953 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution:…

Aufbewahrungsbox für Graef Handmixer HM508

Die Box sorgt dafür, dass der Handmixer ein ordentliches Zuhause in der Schublade findet. The box ensures that the hand mixer has a proper home in the drawer.

Mixer disc holder

Disc holder for Ronic R25

Arendo mixer, stronger and thicker lid

Also check out this chamber reinforcement :) Print settings material: PETG, also enable brim for the lid only and set to brim_width=10mm, brim_type=inner+outer lid : 9 perimeters (to make it 100% solid along the top sloped part) lid's lid…

Arendo mixer, chamber outside reinforcement

Also check out this lid reinforcement Print settings: 6 to 8 perimeters, ≥6 top layers and ≥6 bottom layers In the pictures it's PLA for stiffness, but PETG might be better Supports: only needed on the platforms the screws rest on: use…

Honey Comb Wall remixes and introducing my Screw Wall!!!

Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…

Working Glok-18 Replica from CSGO/CS2 REMIXED

KitchenAid Stand Mixer attachment hanger

I put together this hanger to have a place to store all of the attachments for our KitchenAid stand mixer. The pieces press-fit together... I secured mine to our cabinets using 3M double-stick tape, which serves two purposes... keeping…

Scout 22 (remixed Lucky 13)

-EN- _ *** 2022/10/11 *** FINAL VERSION 1.0 *** *** 2022/10/12 - The missing skin for the neck was added. *** *** 2022/11/09 - Fixed too loose "ears" and removed unnecessary extra parts. *** Do you like Chappie? His little brother is…

Kitchen Aid Mixer Funnel

It's that time of year that my girls do their cookie weekend. They make dozens of different cookies. I saw several ads for funnels. I thought I would design/make them one. They have Kitchen Aid K45SS and a Professional 5 Plus mixers. FDM…

Core One Buddy3D Camera lid remixed to improve view of printbed

Version 2 - moar magnets: After feedback about the camera not sticking - probably due to weaker 6mm x 20mm x 2mm magnets than the ones I had available, the model was revised with the following changes: The 6mm x 20mm magnet is…

Baymax - Remixed with printable eyes

This is a remix of Baymax which has printable eyes that you can insert. The original model for some reason had very bad layering so I smoothed and increased the poly count. Print with lots of support under the hands otherwise one of them…

Small Painting Mixer Trays

A small Paint Mixing Tray for modelling complete with Brush Rest/Holder. Size 105mm x 50mm. The one in the picture is scaled 20% bigger in the slicer and printed with 10% infill. Addition 27 Oct 2023. added a larger version (130 x 80mm)…

Remixed USB + SD-Card Gridfinity Holder

This is a minor remix of a Gridfinity USB organizer by Segan Designs who added the Gridfinity base to the original by Honza200. I reverted the change of Segan Designs and removed the USB C port for the original USB A port. Printing of…

KitchenAid Stand Mixer Attachment Hook

Intended to be mounted under kitchen cabinet for storing mixer attachments. Secured with 2 screws. Intended to be printed on its side with supports.

Flashforge AD5M Enclosure Hinge - remixed to be easier to open and use (print-in-place Door Hinge) v1

NEW VERSIONS v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the…

D&D Remixes Pack #2

One of my son's friends has gotten into D&D recently, so I made a bunch of remixes of my models to be a little more D&D compatible, then printed them out and am giving them to him for his birthday. I figured that I could go ahead and…

Modular Drawer Dividers Remixed for 3D Printed Dividers

NOTE: If you need even more organization, you can print the “ Any Size Hanging Trays for "Modular Drawer Dividers" (Parametric ) ” to provide even more space for your stuff! These trays work great for utilizing the unused vertical space!…

Minimalist Gaming Mouse Display (With Dongle Slot) - Remixed for Ikea Skadis

Mouse mounts for ikea skadis pegboard.

Remixed Hinged SD Card Box - Gridfinity compatible

Removed the micro SD card slots for 3x more full-sized SD card slots. Only the 0.4mm tolerance non-stackable version remixed. This is a remix of nerdpersonthing's Hinged SD / microSD Card box ( Printables ), which is in turn a remix of…

Butterfly Knife / Balisong Toy (No Hardware Needed) remixed training blade

Balisong butterfly knife toy. If you beginner in flipping knives i recommend printing mine remixed version beacuse its more durable. Oryginal version is of course prettier but standing prints are less durable. Print settings: Layer height…

Paint mixer 40mm diameter for small paint cans

This mixer is designed to fit into a cordless drill and can be used to mix paint in smaller paint cans. I tested this extensively and it works great, you can nicely control that not too much air is dragged into the paint and the mixing…

Pastamatic .3mf Including Several Remixes

I wanted a 3 color Pastamatic with Bambu colors to compliment my Bambu Lab Colored toolbox with AMS lid. Decided on Black Frames, Grey Parts, and Bambu Green spindle clips for accents. File is on 4 seperate plates. Took considerable time…

Remixed Measuring tire groove without supports

Modified version of the original Measuring tire groove from Lopata_225 . I had a problem with printing the inner part that needs supports. Therefore, I modified the model so this part does not need supports and could be printed with the…

Drill Mixer – Paint, Mortar & Cement

Turn your cordless drill or power drill into a practical mixer with this 3D printable Drill Mixer Attachment! Designed for quick and easy mixing of a wide range of materials such as paint, plaster, grout, mortar, cement mixtures,…

ResMed AirSense 10 Wall Mount Bracket Remixed CPAP With Screw and Velcro Mounts

v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…

Remixed curled shark key chain

Just remixed this to be a key chain Category: Toys & Games

Remixed BIQU H2 mount, BLTouch and fan shroud

This version is fixed to the Ender 3 v2 X-Carriage using the two upper roller wheel screws instead of the BLTouch mounting holes. Remixed from: Biqu H2 Mount + Cover - Ender 3 CR10 https://www.thingiverse.com/thing:4740250 BIQU H2 Ender 5…

Cord Wrap for Kitchenaid Stand Mixer

I designed this cord wrap to fit the curved back of my Kitchenaid stand mixer, but it should fit anything with a wide curve. Attach with double-sided tape or other adhesive. It should print on its side without supports, but minimal…

Remixed Annoying Gift Box by LittleCoolBomb - sized in mm, separate lid, support-free print

Remixed the Annoying Gift Box by u: LittleCoolBomb : sized in mm. separated the lid from the threaded tie segment. provided split bow for easy, support-free printing. added clearances of 0.3 mm for the tie segments. provided a faster…

Halo Infinite Master Chief Helmet - Remixed (No Visor)

Updated so the visor section is separate from the helmet. Haven't cut up into smaller pieces but it isn't too hard to do so within a program of your choice such as Microsoft 3dbuilder Maybe if you enjoy my work to make this remix you…

Inverse Kinematic Paint Mixer

This is my Inverse Kinematic Paint Mixer, as seen at https://youtu.be/FnnN7typFP0 These printed parts combined with the following non-printable parts will make an automated mixing station for your small paint bottles (up to 45mm…

Bambu filament winder / spooler remixed

UPDATE: Thank you for taking a look at this project. I still use mine - but there is now a more active implementation of this modular idea that you would probably be better off printing. Please see:…

Parametric Mixer Drill Attachment

I was inspired by a recent model upload to create a parametric paint mixer. This model with associated Fusion 360 CAD file turned out really well. You can customize the width, height, blade thickness, bore hole diameter, bore hole length,…

Print in Place Cement Mixer Module

This model is one of many Print-in-Place add-ons for my Modular Truck project. Print-in-Place means that all parts are printed in one go with no assembly required. All add-ons can be connected to the truck seen in the pictures. Thanks to…

Remixed White Power Ranger Sword

Full sized White Power Ranger Sword! Can be printed whole or as separate pieces.

Drill Mixer – Multi Size

This collection includes five spiral mixing tips in a variety of sizes, making it easy to find the right tool for your mixing task. The spiral design helps create a smooth and efficient flow of material while reducing splashing. These…

Tick Remover for Keychain remixed

UPDATED V4 (5/31/2024) I add a new version with very slightly softened shape on the inside of the “catching” part, to make it even sharper where it matters with very low layer printing height. Please read the recommended print settings…

Slider fader knob for Soundcraft, Yamaha, Behringer mixer

Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob. Printed mine with PrusaSlicer on a Ender 3 V2 with variable layer height and 20% infill.…

mimimixer

Mixer attachment with hex handle and safety ring for mixing paints, resins, silicone, plaster, gypsum, etc. Includes set of heads, hex handles and handle connection barrel. Diameter = 30mm Height = 20mm Hex handle length = 160mm…

Remixed AT-AT Pot plant

A remix of Caleb Timoteo's excellent AT-AT pot plant. The main goal was to separate the parts so the base could be printed in white, with the AT-AT in grey. I ended up making a hoth planet base plate, which is recessed for the AT-AT to…

Turbo Mixer Head

Turbo mixer attachment with hex handle and safety ring for mixing paints, resins, silicone, plaster, gypsum, etc. Includes two handles and extension barrel. Diameter = 40mm Height = 50mm Hex handle length = 200mm x2 Prints quickly and…

Remixed USB Holder for Gridfinity

This is a simple remix of the USB organizer by Honza200 Removed 1 SD card slot and 1 USB A port Added 1 USB C port Added a Gridfinity base with no screw holes

Monster Truck Ramps (Remixed and Split for 1:24 Scale)

A scaled-up version of the original, and then split and modified to allow easier printing, and for being able to join them back together. You can use as three split ramps, individual jumps or all joined together. I recommend printing with…

Cord Wrap for Kitchenaid Mixer

Based on the original, but (1) enlarged a bit so the cord fits better and (2) used angles (no curves) so it prints w/o supports (printed on its side). I attached it with a medium size 3M Command Strip.

Mixed Filament Type Test Print

This very simple test print was created to try out an idea for making ink stamps. Short version : Test of a method for printing with two different filament types - in this case PLA and FLEX. The photos show a test disk with gray PLA and…

Adjustable Monitor Shelf - Remixed for Faster Printing

NOTE: The photos for this model do not reflect the actual printed STLs provided but are there to show how this shelf functions. There is a photo of 2 examples using the solid shelf + the “even faster” steps provided below using the…

Spiked Lizard (High Resolution/ Dual-Extrusion Remixes)

This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…

Remixed Upgrated Triangular Prism 3D Enclosure for TRMNL 7.5'' (OG) DIY Kit

Update 12/12/2025: I adjusted the bottom part (the pins are slightly narrower and there are four of them). I made the top part a millimeter deeper overall, so that the display should be better protected. Update 09/14/2025: I adjusted the…

Paint/Resin Mixer

Saw some paint mixers online, but didn't find anyone I liked and thought was designed to my liking, so I whipped this one up, has a 6mm hole in order to use a wooden or aluminium dowel that you can either glue or screw in