Ammobox 100x50x30 mm
(Ammo)box 100x50x30 mm with sliding lid, e.g. for Luger 9mm ammo
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
77 modeli
(Ammo)box 100x50x30 mm with sliding lid, e.g. for Luger 9mm ammo
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
Slim Ammo-Box for .223 / 5.56 ---.308 / 7.62 Box now also available! --- https://www.printables.com/model/1338689-308-slim-ammobox-50rds-762x51 Update: Slot for label infront of box engraved “.223 Rem” infront of Box Locking mechanism…
Термокамера для принтера Flying Bear Ghost 4/4S/5. Для сборки необходимы следующие компоненты: Оргстекло толщиной 3 мм. Две латунные вплавляемые резьбовые втулки М3 (в ручку верхней двери). Неодимовый магнит размером 15х18х3 (в ручку…
Tras comenzar el movimiento Chemobox en 2018 junto con otros tuiteros como @FradeCelso y @Kurioso desde Ayudame3D.org hemos seguido facilitando estas cajas protectoras a cientos de niños y niñas en España. Tras recibir muchos feedbacks…
Nothing too complicated - just a box for loose stack of note papers. But it was useful practice task on modelling a hexonal grill in Inventor. Designed with inner space sized 90x90mm, can be easily scaled up or down for different papers.…
A low-profile, retro-styled keycap set designed for Choc V1, range from 1U to 2.25U, plus a 4.75U spacebar. All keycaps above 2U should work with Choc V1 Stabilizer. Resin print recommended (thinnest wall is 0.85mm), current design is not…
Slim Ammo-Box for .308 / 7.62 Box Extreme slim design Stackable Reliable Option to insert a Note with Loading-Data from inside No visible Slot for Note from outside (clean Design) Punisher logo on top as 0.1 mm indentation for two-color…
Use this riser style https://www.amazon.com/LINKUP-RX6900XT-High-Speed-Gen4%E2%94%83Universal-Compatible/dp/B08XN26DRZ/r
Airsoft BB Can / Dispenser / Speedloader / Magazine
In a.m. discipline you need 5 rounds per stage, standing, lying, kneeing. Therefore, this box provides 5 round per stage. Multiple parts: Box itself Slider (cover) Nameplate(s) Arrow Nameplates you need to design individually.
Drucker (Printer): Creality Ender 3 v2 Filament: Eryone Matte Aqua Blue Schichthöhe (Layerheight): 0.2 Temperatur (Temperature): 210 / 80 Gummifüße (Rubber feet): 8mm Ø / 2,5mm hoch
The Ikea Kludd comes with a pair of clips to hold paper or other stuff. Over the years the the old ones no longer hold tention and everything will fall down. So I copied the old ones to print new, with a bit more flex so hopefully they…
If you feel like helping me fund my kids journey into Combat Robotics: https://buymeacoffee.com/happykraken
A miniature toy model of a Mortar Tube with a Ammo Box containing 8 Mini Mortar Shells. It can be armed with small pieces of eraser, popcorn kernels, or small ball bearings. You can scale it to fit the spring you are using, but it works…
WARNING THIS MODEL IS HORRIBLE AND DOES NOT WORK ANYMORE This is a culminating event of a week of modeling and lots of coffee. This monster of a PC case is equipped with 3 , 2.5inch ssd mounting points, ATX PSU support, 6; 120mm exterior…
Just purchased this awesome flat design water bottle to fit into my work bag and immediately started working on a low profile vertical stand I could use to hold it upright on my desk. I printed it on my Creality Ender 5 Pro using 3D…
Sehr stabile und praktische Munitionsbox für eine Trainingseinheit auf dem Stand. Die Munitionsbox fasst 50Stk. GP11 (7.5x55 Swiss) Patronen. Herausnehmbarer Patroneneinsatz, falls mal etwas in die Box fallen sollte. Die Höhe des…
Diseño de un mini robot de sumo, para proyectos escolares.
This model holds all bottles in the horizontal position, and holds the A6 and A7 vertical too. The center of gravity is too far back for the A5 and slim bottle to be held vertical. The stand is angled 41 degrees and has a slight lip so…
Disclaimer: I designed this for my own usage. Litium batteries are potentially dangerous and come always with a risk of fire or explosion. You have to decide yourself, if this is a safe way to store them. Make sure the box is not…
This is very usefull cover to your ender 3 (non-pro) motherboard. Prevents little pieces of filament from falling and stoping motherboard cooling fan. Design is just very simple. Model is remixed and optimized . It also makes the fan…
some parts are specific to the used hardware and need modifications. holes are designed for M4 threaded inserts Video:
Angled ammunition storage box, ideal for handling cartridges while wearing gloves (for exemple, in winter). In its version 9x19mm, 50rnd. The cover is available on 3 sizes: L: gap 0.4mm between the box and the lid M: gap 0.3mm between the…
Angled ammunition storage box, ideal for handling cartridges while wearing gloves (for exemple, in winter). In its version 223rem (5.56x45 NATO) 50rnd The cover is available on 3 sizes: L: gap 0.4mm between the box and the lid M: gap…
This is a cover for the lumen PNP's v3 motherboard, which does fit the reset and boot buttons on the motherboard.
This is a replacement for “beam 3” of the motherboard support beams for the BeamCase ATX case (https://www.printables.com/model/897748-beamcase-atx-and-microatx-compact-modular-matx-cas). The original model included a lip on the right…
A motherboard shroud for the (arguably) ugly gigabyte b550 ud ac atx am4. It does require you to remove your gpu and cpu cooler cables But other than that it is quite simple! I am hoping that this model will help shine some light on what…
Bottom mount for the IKEA SVENSÅS memoboard. To avoid having it flap around, when detaching magnets… Printed in PLA, infill 30%, using support setting “Everywhere”.
This is a remix of Ender3 v2 mainboard 92mmfan cover NO support by Csoki96. I wanted the same flat cover design but for a 80x80mm fan. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2…
Mount for installing a Mobotix Cam tilted in an outdoor setting.
este modelo de sumo es para autonomo, fue pensado para usar los sensores gp2y0a41sk0f, la base para motores es para motores de 24mm de diametro. materiales que use en este robot: 2 driver puente h Bts7960 5 sesnores gp2y0a41sk0f 2…
This is a sleeve around the troublesome mobo standoff of the Louqe Ghost R1. This part provides more surface area around the standoffs so that users cannot over-tighten mobo screws to the point of shredding the mobo. 2 models are provided…
Specially designed to attach FEMOBOOK A2 electric coffee grinder to Casabrew or De'Longhi 51mm portafilter, it is also compatible with most portafilters with 3 ears. Simply twist to fit it onto the portafilter and place the FEMOBOOK…
I really liked the idea and design of Ender 3 Pro PSU Cover honeycomb 80mm fan by IDDQD ( https://www.thingiverse.com/thing:4082992 ) so I designed a similar honeycomb cover for the board. Print Settings Printer Brand: Creality Printer:…
This is the bottom catch cup interface for the Femobook A2 electric coffee grinder. It is intended as a component to be integrated with other parts to create adapters and accessories for the coffee grinder. Feel free to use this as a…
this design created by me on instagram @wayan_choir you can use and develope or upgrade this design. not for Comercial i hope this design may help you to start learning and make an sumobot cuz i like if there is someon interest to robotic…
This simple plate is protecting your LumenPnP (Opulo) motherboard from electronic components that could fall down thru the holes in the staging plate and cause short circuits or other issues with the circuit. It's 100x100mm big and has…
Aufputzadapter für Mobotixkamera M73.
This is a simple robot that i created as study/debug object for my new lawnmower robot (todo). The robot has a sensor to sense distance. I the distance is ok (>30cm) the robot will move forward. If the distance is not ok (<30cm) the robot…
This is intended to be a drop-in adapter that replaces the stock plastic receiver of the Femobook A2 grinder, letting you use a standard 51 mm stainless steel dosing cup. I did this because I found that eliminating the plastic greatly…
An alternative stand to the Femobook A2 x Pietro modification by duerlis and realized by LeBrew. Recommended 2mm wall thickness all around. Remember to compensate for filament shrinkage
Ammo box for competitions with 6 rows. Every second raw is slightly higher so it's easier to take the ammo out of the box. The lid has simple locking.
I do not have a RPi 4 to use with the original backpack, so I split it in half and kept the motherboard portion. Same port position and holes out the top. Done with permission from the creator of the BugBu series. Rolls17. Go check his…
This is a Foot for the NATO ammobox size 7 (~48x24x37cm). This ammobox can be used as a cheap drybox holding 8-12 spools of filament. For one drybox you will need two of each, cutaway and non-cutaway. I have also designed a fitting box…
Motherboard case for a Tevo Tarantula. It orients the board 90 degrees to help give space to wide extruder accessories. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: .2mm Infill: whatever…
把你的Femobook A2的塑料接粉杯换成你的51mm接粉杯(更容易倒进粉碗,更少静电)。 Exchange that plastic catch cup with your 51mm dosing cup (for ease in dosing and less static). 五金 : 4x M2*5 沉头螺丝, 无名51mm接粉杯(大家的都差不多) Hardware : 4x M2*5 flathead/countersunk screw, general…
Fidget toy with cubes and links Comes in three sizes (2x2, 3x3 and 4x4) Requires supports, recommend snug supports to get them off easier after printing
just some fun files to get you startem making your holy symbols
Remix to place two 4010 fans on top held in with the cover's corner screws. The old fan port is now an exhaust. This is meant to be used with: https://www.thingiverse.com/thing:4470558 and I haze zero clue if it works with anything else.…
Žák má oblíbenou počítačovou hru Minecraft. Zde se setkává se stvořeními, nazývanými Mobové. Žák se rozhodl pro vymodelování svých oblíbených.
This is a base or skeleton case, that protects the underside of the PCB, mostly from unintended shorts do to accidentally placing the board on top of conductive elements on your workbench. There is space inside for all the through hole…
All files can be printed without supports. Lid must be rotated 180 degrees. Holder contains 8 holes for M5 inserts. Only 4 are needed. There is cable through hole on one site for a 10mm diameter cable.
This bracket will cover up your sata cables. Screws line up with the E-ATX mobo screws perfectly. Will only work with ATX size Mobos. Category: Camera
I recently got my niece a trike. Unfortunately, the positioning of the handles allows her to easily scrape her hands if she gets too close to a wall or other obstacles. Luckily, I had some ASA filament I wanted to test, so I designed this…
The Memobottles are extremely practical to take with you. Unfortunately, drying the bottles after washing is a bit difficult. That’s why I designed this Memobottle Dryer. Simply place the bottle in it after washing and let it dry.…
Flip one them before printing so that one print mirrors the second one!!! I used polymaker's Polysmooth filament It sands off easier than PLA. Cleanes up the huge stock holes. Works with a midplate upto 8mm thick. Install your midplate,…
[disclaimer: I'm relatively new to 3d printing] To be printed from flexible material. Due to overhangs may be tricky to print. I originally intended to print it in spiral vase mode, but it always failed. So I printed it in normal mode,…
This is an adaptor that allows you to grind directly into your aeropress with the Femobook 2A. The nubs might be a bit thicker than your aeropress if it is, sand the bottom down a bit. Some recommended print settings. Arachne wall…
This robot uses deepface to detect the emotion you are feeling and play music based on your mood or help you with it. You can find the Github here . The instructable for how to build this can be found here . I also have a YouTube video…
I found myself rotating the grinder a lot in the stand in order to get the beans to feed consistently, and this rotating stand makes it a lot easier. It uses 5 608 bearings. Print the stand, 4 of the top caps, and one bottom cap (which…
Disclaimer: Photos are only placeholders. I got a really weird idea for a "World's Longest Fingerboard", so I just elongated it. It is approximately 150 mm long, and instructions are on original model. I also made an even longer version,…
So you got a cool new memo bottle to fit in your bag, only to find out that it doesn’t stand up on its own and that makes you angry for some reason. Worry no more! This stand keeps the bottle at a steeper angle than other I have seen and…
I modified a GBP and NES enclosure to hold a repro DemoBoy / DemoVision mobo. https://forums.nesdev.org/viewtopic.php?t=23843&start=75
Replacement part for the Mobois self-clamping curtain rod holder kit (010 mm, white). This part connects the window mounting base to the metal pin holding the rod. Compatible product: Leroy Merlin / Mobois (Ref: 72300641 ) Use case: Fixes…
This robot uses deepface to detect the emotion you are feeling and play music based on your mood or help you with it. You can find the Github here . The instructable for how to build this can be found here . I also have a YouTube video…
🖥 Vertical GPU Mount – Optimized & Reinforced Version This is an improved remix of the original model, redesigned to provide greater strength, better usability, and a smoother printing experience. All modifications were made with…
I recently got my niece a trike. Unfortunately, the positioning of the handles allows her to easily scrape her hands if she gets too close to a wall or other obstacles. Luckily, I had some ASA filament I wanted to test, so I designed this…
Specially designed to attach FEMOBOOK A2 electric coffee grinder to Casabrew or De'Longhi 51mm portafilter, it is also compatible with most portafilters with 3 ears. Simply twist to fit it onto the portafilter and place the FEMOBOOK…
(Ammo)box 100x50x30 mm with sliding lid, e.g. for Luger 9mm ammo
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
把你的Femobook A2的塑料接粉杯换成你的51mm接粉杯(更容易倒进粉碗,更少静电)。 Exchange that plastic catch cup with your 51mm dosing cup (for ease in dosing and less static). 五金 : 4x M2*5 沉头螺丝, 无名51mm接粉杯(大家的都差不多) Hardware : 4x M2*5 flathead/countersunk screw, general…
This is intended to be a drop-in adapter that replaces the stock plastic receiver of the Femobook A2 grinder, letting you use a standard 51 mm stainless steel dosing cup. I did this because I found that eliminating the plastic greatly…
🖥 Vertical GPU Mount – Optimized & Reinforced Version This is an improved remix of the original model, redesigned to provide greater strength, better usability, and a smoother printing experience. All modifications were made with…
This is an adaptor that allows you to grind directly into your aeropress with the Femobook 2A. The nubs might be a bit thicker than your aeropress if it is, sand the bottom down a bit. Some recommended print settings. Arachne wall…