Liczymy pasujące modele…
The Modular Attached Storage Stack ( link ) is a compact 3D printed NAS enclosure with expandable bays support up to 8x 3.5" + 3x 2.5" drives. 👉For the premium version of MASS with additional features, please see MASS Premium Page here .…
There are 6 parts of 3D printing drawings Jsaux provide 1. A Deckmate adapter, after using this part you will be able to use Deckmate accessories on the ModCase system. 2. An Hard drive adapter with its own adapter to replace the ModCase…
Three card MicroSD holder that fits nicely between the mounts for the JSAUX Modcase Steam Deck case. When the kickstand is installed, the holder is completely covered. In the pics above, I've just affixed it with some double-sided tape.…
A universal component for mounting power banks or other accessories using 3M VHB tape or Magsafe Magnetic rings. You can also design Velcro fastening openings based on this component. Download the .STEP file to create your own accessory.
A Deckmate compatible adapter for mounting Deckmate accessories onto the ModCase. Download the .STEP file to create your own accessory.
A VESA Mount Adapter for securing the Steam Deck to a VESA Mount. Download the .STEP file to create your own accessory.
My Jsaux modcase's stand became sad and loose, and I haven't even had it for a year, so I scoured Printables for the files I needed to combine, and voila! A replacement stand!
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
The Wall Mount for the Steam Deck ModCase is designed to securely hold your Steam Deck on any wall surface. It provides a sleek and space-saving solution, keeping your device easily accessible and off your desk. The mount is sturdy, easy…
An adapter to use deckmate accessories with the JSAUX ModCase
My version of the JSAUX ModCase has 3 plastic tabs on each side for the stand mount so the original version of this does not fit. My guess is that i have a newer revison of the ModCase that made the original design not fit. so i made a…
A replacement component for the universal kickstand to replace the original kickstand on the ModCase. Mounting a hard drive is just one option; the hard drive or other accessories can be fixed using 3M VHB tape or Magsafe Magnetic rings.…
This is a collection of models related to the JSAUX Modcase for the Steam Deck. Their intended use is to be imported into a CAD project, so you can build compatible accessories around them <3. JSAUX has released an official set of models…
A TF card / microSD card storage slot to store your Steam Deck games, giving you more games on the go. Download the .STEP file to create your own accessory.
The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism Want a stronger/more official solution? We also offer injection molded…
I did not like the mounting option that came with my JSAUX ModCase. I made this which can attach anything sucrely from any side using 15mm velcro straps trough the integrated holdes that are all around the model. This feels way more…
Inspired by JSAUX Modcase Vertical-Orientation Adapter by Sabrina. This was exactly what I was looking for, but Sabrina's design needs to be cleaned up, and the creator hasn't uploaded any CAD file, only an STL. So, I decided to design…
I use the JSAUX modcase on my Steam Deck daily but one issue I immediately identified was the lack of protection against foreign objects damaging the charge port and/or accidentally turning on the unit in my backpack. There are three…
This is the official 3D Modeling ToolKit for the JSAUX ModCase for ASUS ROG Ally（PC0119） . With this toolkit, you can easily design custom accessories for the ModCase, unleashing your creativity. Download the STL files to start 3D…
Printed this excellent stand to allow for desktop like gaming on my SteamDeck. A few small modifications were required for the JSAUX ModCase and my ZSUS 14" 2k monitor. Printed in ESUN PLA+, 4 wall loops, 15% gyroid infill.
A slide-on attachment for the JSAUX Steam Deck ModCase that holds an Apple AirTag. It slides onto the ModCase's included strap attachment's base (remove the rubber straps first, of course). It's thin enough that the Steam Deck doesn't lie…
its just a wall mount with the valve logo on it. simple and effective.
This uses the base of another model, but adjusted to add a small mount for jsaux mod case attachments. I made this one a bit longer than the mod case to use for a clone hero guitar attachment model. I may come back and shorten it so it…
A mount that works with the Jsaux modecase to hang your Steamdeck on your Skadis pegboard.
Description Additional module for MASS Premium allowing to use cheaper and better available ATX power supplies. Features Tested with 140mm and 150mm ATX power supply Using with 160mm should be possible, but challenging. May require to…
This is my upgraded stand for the JSAUX ModCase, designed primarily to solve the problem of the original kickstand becoming loose over time. It features a mechanical locking mechanism with a spring, providing a distinct, tactile "click"…
First attempt at using FreeCAD to edit/combine parts found online, so it's not the prettiest thing ever. Sorry. This piece changes the orientation of the Jsaux Mod Case Strap Attachment from horizontal to vertical. Needed this because all…
DeckMate addon for JSAUX ModCase (untested)
This design is intended to be a drill jig for the Steam Deck Jsaux Modcase front cover in order to allow airflow while the front cover is on. In my case, it's for use with an external display, so i don't have the internal display exposed…
The deck goes in my backpack daily. Most everything else that travels in the backpack gets lint and dust in the cracks and openings. I didn't want that to happen to my deck so i made these covers. **** WARNING: Not removing/opening the…
Three Options Available! *Simple: A modified version of the official HB0609 "slide" part, intended to help mount the HB0609 to the back of the JSAUX Modcase. *Extended: The modified “slide” plus a vertically oriented ‘ModCase’ connector.…
Several related models are included, designed specifically for use with the JSAUX Modcase. I'm using the Steam Deck version, so I don't have 100% confidence all of these models will work with other versions of the Modcase. Model…
Made to fit this USB hub: https://www.aliexpress.com/item/1005008054068671.html?spm=a2g0o.order_list.order_list_main.41.7c091802AWyCrw You need a JSAUX modcase for this to work! Printed in ASA+, but PETG should work fine, maybe even PLA…
REMIX OF MODCASE MASS NAS ITX PC CASE https://www.printables.com/model/590711-nas-itx-pc-case-with-stackable-expansions-modcase I wanted to be able to 3D Print labels for my drives that were removable. If a drive goes I don't want to…
Hi it's EddieCoast with SteamDeckChop, you're going to be in a great mood all day! There are a lot of good docks / cradles / holders / display stands for the Steam Deck out there, but almost none that accomodate the JSAUX ModCase (PC0104…
Wii ModCase The Wii ModCase is a more modern looking, mod-friendly, 3D-printable replacement case for the Nintendo Wii. It was designed and tested specifically for the Wii RVL-001 (2006–2010) model, so compatibility with other Wii…
Wanted to get my partner a lapdesk that holds their Steam Deck, specifically with the Jsaux ModCase. Other options out there didn't perfectly fit their usage which was able to hold their Steam Deck and didn't block the Steam Decks exhaust…
This is a remix of the side panels from the Modcase Evolution case. Very nice baseline design, I highly recommend it! I wanted my side panels to have a bit more flare to them, so I made them into multi part pieces! The mesh can be printed…
Merged the two referenced models to create a sled that will hold 1-3 2.5" SSD or HDD devices depending on height. The mounting has been recessed to allow for additional cable clearance on the rightmost slot of the MODCASE MASS Premium…
a 280AIO unit that attaches to the side (when vertical) of the ITX-2 MODCASE printable case.
Also has counterbored screw holes to allow the duct to be flush against the side panel. Uses M3x45 screws. MODCASE MASS
Simple JSAUX ModCase attachment that I made to attach my external SSD to. Use some velcro to secure things to the back. *Tested and worked with a 0.4mm nozzle and 0.4mm layer height print
This is a remix of the upper fan mount from the Modcase Evolution case. Very nice baseline design, I highly recommend it! This remix allows the fans to sit almost flush with the top of the case. I did this as I needed a couple more…
This is a small print that adds either 2 120MMx25mm or 2 140mmx25mm Fans to the top of your brand new Modcase EVO (ITX) Case!
This is a remix of the underside cover from the Modcase Evolution case. Very nice baseline design, I highly recommend it! Due to some size limitations, my PSU sticks out of the bottom of the case. Therefore, the power cable has to be run…
Power supply was choking a bit due to the orientation. In my configuration the PSU fan is pointed toward the inside of the case, which isnt optimal. To give it a bit more air I added two 60mm noctua fans. One of which has a baffle to…
🧱 General Overview: This model is a snap-in mount bracket designed to securely affix the Forida USB-C Docking Hub to the rear rail system of the Jsaux ModCase for the Steam Deck. It enables flat, low-profile mounting while still giving…
The JSAUX ModCase is great for protecting the Steam Deck on the go but when the Deck is in use or docked, the cover is annoying to have laying around. I created a very basic bracket the protective cover can mount to in a similar fashion…
This adapter converts the proprietary JSAUX Modcase “strap” adapter to a more universal Low-Profile NATO rail. Designed to facilitate easy connect/disconnect. it includes cuts to support the Smallrig ‘Hawklock’ system. Consider the…
Aesthetically, mounting my switch 2 horizontally didn't work for me, and I wanted to mount it vertical. Added a small blockage at the end of the mount, allowing for safe mounting of the switch 2 and other Modcase devices.
This is a straightforward module for Haydn Bao's Modcase Hyper case. It allows to install 2 SATA SSDs, but with a minimal footprint and without having to use up a fan spot. The ideal spot for it is next to a SFX PSU in the top front…
A Power button cover for the JSAUX ModCase for Steam deck. Just glue it on to the notch on the travel cover and your Steam Deck wont accidentally turn on in your bag anymore. It has a notch where the charging port is so you can still…
This is a module for the great MASS NAS case (free version) that allows you to mount a dual slot GPU. To connect the GPU to your mainboard you need a PCIE riser cable (the mounting points probably need adjustments for that) or a PCIE…
Several related models are included, designed specifically for use with the JSAUX Modcase. I'm using the Steam Deck version, so I don't have 100% confidence all of these models will work with other versions of the Modcase. Model…
MODCASE 3D 8.4L is a fully 3D printable PC Case with advanced customizations. Instructions Here This is a standalone version of the original MODCASE 3D for Printables. It includes the 8.4L case plus all of its MODs and optional…
MODCASE 3D 13.3L is a fully 3D printable PC Case with advanced customizations. Instructions Here This is a standalone version of the original MODCASE 3D for Printables. It includes the 13.3L case plus all of its MODs and optional…
MODCASE 3D 14.5L is a fully 3D printable PC Case with advanced customizations. Instructions Here This is a standalone version of the original MODCASE 3D for Printables. It includes the 14.5L case plus all of its MODs and optional…
This is the 3D Modeling ToolKit for JSAUX ModCase of ASUS ROG Ally X. You can design accessories for ModCase of ROG Ally X. The mount structure of Ally X one share the same design of Steam Deck one. So you can basically use the existing…
Simplicity Evolved MODCASE EVOLUTION is a fully printable PC case with 4 sizes to print from and comes with endless customization options. Minimal part count. Maximum Strength. Reference layout. No Riser Cable needed. Easy assembly.…
Note: Optional parts are unders 'other files' section on your download page. (Scroll down to the bottom) The Modular Attached Storage Stack ( MASS ) is a compact 3D printed NAS enclosure with expandable bays support up to 14 drives.…
MODCASE 3D 8.4L is a fully 3D printable PC Case with advanced customizations. Instructions Here This is a standalone version of the original MODCASE 3D for Printables. It includes the 8.4L case plus all of its MODs and optional…
MODCASE 3D 13.3L is a fully 3D printable PC Case with advanced customizations. Instructions Here This is a standalone version of the original MODCASE 3D for Printables. It includes the 13.3L case plus all of its MODs and optional…
MODCASE 3D 14.5L is a fully 3D printable PC Case with advanced customizations. Instructions Here This is a standalone version of the original MODCASE 3D for Printables. It includes the 14.5L case plus all of its MODs and optional…
![NAS ITX PC Case with stackable expansions [MODCASE MASS]](https://media.printables.com/media/prints/590711/images/5398476_0c00c6d9-fdbe-4607-87dd-43629c8d4a8e_5e31701b-0df6-4979-ab25-d1b7d3dc16b8/212.jpg)
![[MODCASE MASS] Drive Labels](https://media.printables.com/media/prints/1e9286db-3b82-46bb-b401-3ea30d65f3b8/images/9579328_548405bf-b260-43db-a4ce-3319ad35f5f3_743a9113-5350-415a-aaea-da06046daa67/img_1672.jpeg)
![Ultra Compact PC Case - 4 sizes included [MODCASE EVOLUTION]](https://media.printables.com/media/prints/680197/images/5927356_4fc0ab26-685f-4256-9843-c73b418acd59_85db2c29-ef9a-43bc-af05-8df6c5107a59/v5.jpg)
![Modular 4-12 Bay NAS ITX Case [MODCASE MASS]](https://media.printables.com/media/prints/714333/images/5602050_91bff5ac-2d72-4823-9073-be478567256a_6e0d4b3e-b8fe-4a89-b9c3-5456533a308d/212.jpg)