Liczymy pasujące modele…
Large water bottle holder for clicgear (v3 to 4.5) golf push cart inspired by the v4.5 clicgear water bottle holder. This was designed for a 9cm diameter by 25cm tall water bottle ( YETI 18oz Rambler & Thermoflask ). Printing Tips…
Wydruk około 8,27 €–10,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A stand made for ~20 cm height FumoFumo plushies by Gift. This stand was made with sizing referencing the standard FumoFumo Koishi Komeiji plush. This stand fits loose, and is only meant to keep the plush upright on a stable flat surface.…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Introduction Do you have a woman in your life? Does she have hair? Or maybe you are your self are a person with hair. Then do we have the thing for you! Here we have an outstandingly modelled claw clip that holds hair all day long! And…
This model is compatible with the lego system.
osVAC Triton TRA001 / MOF001 Adapter
Thermoformed 3D hearts for treats or trinkets. These are printed flat, then shaped using a heat gun. Printing Instructions Heart Base: PETG, ABS, or other heat-resistant filament Hearts: PLA (with or without hanger) File is pre-configured…
This is a cap for COSMO CA superglue that allows you to use luer-lock (or luer-slip) needles for more precise glue distribution.
WIP Currently in test print Before anyone asks NO there is no respirator in the chin area... any model with one is wrong. Category: 3D Printing
Hello all! I needed to make a cup adapter for my large water bottle for my car (which is a 2018 Honda Pilot). I figure that different cars have different cup holder sizes. I designed this one to be strong and be printed with very little…
Note: I added a customizable OpenSCAD file for the round keycaps. This is my first ever attempt at OpenSCAD, so there are probably some bugs and until now no input checks. I have also a hard time naming variables, so they are not all…
Printed using 3D Solutech See Through Red PLA for the base layers and Prusament Galaxy Black PLA for the top layers. With the light on, these colors produce a cracked lava effect. The main pieces of this lamp shade are printed flat and…
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of blocks that can be used to recreate the Star Wars Grand Moff…
I bought a secondhand Triton MOF001 plunge router. The base was missing and I could not find an online store in South Africa that supplied the base for the MOF001. (The base for the TRA001 was widely available, but is 180mm in diameter.)…
I was getting tired of my old router spraying all the dust in my workshop, that's why i designed this dust extractor. It's directly bolted to the baseplate of the router. The OD of the hose connection is 35 mm and fits my rubber adapter…
Slightly tighter fit for Cleantec adapter. 36.5 mm vs 37.5mm inside diameter.
This is a helmet and gauntlet set for a MINI 13 version of Moff Gideon. I figured these were the only pieces unique enough to merit their own models. The other armor pieces can be found in Dr Operator's Boba Fett Remix and my Mando Remix .
Decided to prototype PUNI themed Gatling gun for Mao. As my brother suggested the new name will be "Puni-Nyatling-Gun". It's a classic hex-barreled machine gun with custom designed "paw-discs". The longer barrel version for Puni Tu is…
Star Wars - Characters - Grand Moff Tarkin (Peter Cushing)
HOW I MAKE IT: YOU NEED: ON AMAZON Tira LED Direccionable:…
Dieses Set umfasst mehrere 3D‑Modelle eines STVO‑konformen Mofa‑Versicherungskennzeichens im typischen Format. Die Modelle orientieren sich an den realen Abmessungen eines Versicherungskennzeichens und eignen sich ideal für dekorative…
Say goodbye to ill-fitting sports gear! These are lightweight, 3D-printable shin guards for football/soccer that you can custom-fit to your exact leg shape. The model prints completely flat, making it an easy and fast print. Afterwards,…
How to form the bracelet How to use this system Measure the wrist of the person you are trying to build a bracelet for. This measurement needs to be in millimeters. Using the chart below, determine which form you will need. Select a form…
A handle for Takeya/Thermoflask 32oz tumblers that are commonly found at Costco. It helps to put a single layer of gaff/duct/electrical tape on the inside of the ring to help it hold/grip to the tumbler (see photos) . Design may be…
This is a high-detail fan art sculpture of Wanda Maximoff, inspired by her iconic appearance in the MCU.
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D Introducing the Plastic3D Hanging Bat, a perfect 3D-printed Halloween decoration to add some spooky charm to your space! Designed for easy…
Tiskněte z PETG, ASA nebo ABS. Na těsnící plochu nalepte kolečko gumy.
Halloween Pumpkin Surprise – Thermoforming Mold Make Halloween treats extra special with this pumpkin-shaped surprise box. Once formed and assembled, it becomes a unique little gift package for sweets or other small surprises—perfect for…
“Every society has something to offer. The cloners. The Jedi. And even the Mandalorians. By aggregating the best of each, I will create an army that will bring order to the galaxy” - Moff Gideon Introducing the newest member of the…
Printed in PLA. You may wish to soften the corners with sandpaper. Design hinges on the metal pin that came with the original.
Středící kroužek pro přehrávání SP/EP desek. Vytiskněte dle svého uvážení a potřeby. Díl není nějak namáhán, takže postačí 2 perimetry, tři spodní a 4 horní vrstvy,10% výplně a výška vrstvy 0,24 mma výše :)
Zaślepka, zasłonka kamery DSM w samochodzie BYD dolphin surf. Jak to działa? Zasłania kamerę monitorującą oczy kierowcy. Oczywiście ta kamera i cały system jest super i genialny i UE każe to montować wszędzie a wyłączanie tego systemu…
This tool is designed to allow the removal of the MoFlo valve in order to clean it. With the valve closed, insert the Removal Tool in the bottom of the valve, aligning the ridges with the rubber tabs. You should feel a gentile pop when…
I take my ThermoFlask bottle to many places, and somewhere along the way I lost the sleeve. Putting the aluminum bottle down on hard surfaces can be a hassle (mostly because I forget the sleeve is not there and it hits the surface hard).…
I was looking for a quick project to learn some FreeCAD, so when I saw the desktop thermoformer by MELKANO (https://www.thingiverse.com/thing:6156271) that was lacking some laser cut files and was supposed to be open source only to…
A catch-all box tray for holding common tools for use with ThermoFisher LC and MS intruments.
This thermoformed heart can be used as a gift for someone, decoration or anything you like. To print it you remove all top and bottom layers in the slice and increase the amount of infill. Then you place it over the mould (printed with…
Systainer sys3 337 interior for Triton MOF001 router. Printed the bottom inlay in 4 quarters. Full size stl file also available. For the collet holder, the double variant is preferred, due to the twisting motion. Onshape document:…
Auswahl aus verschiedenen Dateien möglich. Diese sind dem Original Werkzeugfach der Hercules Mofas nachempfunden. Die Version mit flachem Boden ist für 3D Druck optimiert. Teilenummer bei Hercules war P 00 927 999 73 05 000 Mein Make ist…
Fence upgrade for Triton MOF001 router (probably TRA001 as well). Features additional dust extraction, a variable fence opening and a knob for additional stability during routing. The additional fence parts are mounted on the pre-existing…
Hello it's HanJo 3D ! Watch my Video and Do it ! https://youtu.be/L6dN_Dby1KY I Hope you like it ! Good Print ! Follow me on : Facebook : https://www.facebook.com/hanjo.hanjo.125 Twitter : https://twitter.com/HanJo_3D Instagram :…
If you lost the original one, you need a M5 bolt, preferably with a 10mm diameter head.
We purchased a Thermoforge T3 heater by AC-Infinity in order to run some experiments in a controlled environment. Unfortunately, the device can only heat up air from outside the grow tent. This leads to a periodic cycle where the…
Ce tube PCR est ultra rapide à imprimer, ne prend que environ 30 cm de filament. Il est fait pour dépanner en laboratoire en cas de rupture de stock Le mur extérieur doit être imprimé avec une largeur de couche de 0,2 mm. Pour des…
Designed this "Puni-Bazooka" to fit the spirit and design of PUNI MOFU Megami Device action figures. All parts are made to print without support, then assemble using 3mm pegs cut from model set runner frame. Scope sockets can be filled…
This is an odd creation. My daughter lost her ThermoFlask, we walked around her entire school and never found it. I got the bottle as a 2-pack from Costco, I didn't want her to lose the other one and be forced to buy another two. So I…
House for NICE MOFB photocells printed from PLA, but better is from PETG or ABS.
Gracias a Dukedoks por el diseño antes de nada. Solo lo he modificado para poder imprimir todo el conjunto. Se ha modificado el panel apra poder hacer la tapa con pared de 1.2mm y se ha creado la tapa. El clip para unirlos es el mismo.…
Description: Replacement handle for ThermoFlask food jar. Designed for a snug and secure fit, it attaches easily and provides a comfortable grip. Durable and heat-resistant when printed with PETG or similar filament, making it ideal for…
This is a couch cup adapter for your 1.2L/40 OZ Thermoflask water bottle. this will fit in couch cup adapter with a depth of 83mm and 71mm diameter (with silicone protective boot)
A variation of AC-Infinity Thermoforge T3 Intake adapter improved efficiency which improves the efficiency.
designed to be used on a MAKYU Multiplier (pressure former)
Můžete si stahnout dva modely. Jeden je pro průměr trnu 6,35 mm a druhý pro průměr trnu 7,25 mm. You can download two models. One is for a 6.35mm mandrel diameter and the other is for a 7.25mm mandrel diameter.
Den Staubsammler nur einlegen. Er wird durch den Ring von der Kreg-Platte leicht geklemmt, sa das der Staubsammler gehalten wird. Die verlängerten Stützen sind oben verbreitert, so das jede Einlage der Kreg-Platte passt.
I remixed the Cleantec adapter for my Triton MOF001 to directly connect a standard 32mm hose (inner diameter). This is very useful when using the router mounted upside down in a router table.
I created this ThermoFlask 40oz cup holder adapter for my 2017 Kia Sorrento. It fits pretty well but can be a bit snug with the rubber bottom on the bottle. I printed it with ASA at 30% infill which is likely more then needed.
I modeled a spacer bracket so the door would fit with other part cooling solutions as well. Link for Bracket Here the honeycomb grille can be a bit tricky to print if you are on a .6 nozzle. it will not slice correctly unless you set your…
Auf anfrage kann ich den Kanton wechseln oder den Text. Schreibe mir eine E Mail: [email protected]
This is a bust or statue of Peter Cushing as Grand Moff Tarkin in the original Star Wars film. It's just something fun to put above my printer. If you like what you see, please follow me and give what print you like a like. Let me know if…
The template can be used by those who are learning Bopomofo symbols for the first time to depict the symbols. Once you have mastered them, you can pass it on to the next person. An accompanying sample can be used to compare whether your…
A dust extractor hood for the Elu MOF96 router. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: Yes **Resolution:** 200 Infill: 20 **Filament:** Unspecified PETG Clear Category: 3D Printing
This support only fits on to the Bright Tangerine sideplates and the „DJI RS2 & RS3 Dovetail“ (not extended) baseplate for the RED Komodo. Screws: 2x M3 x 12mm 1x M4 x 12mm 2x M4 x 20mm Printing: Layer height: 0.1 Supports: Zigzag Infill:…
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas; fondo 2mm, logo rojo 0,6mm y resalte negro 0.4mm Diámetro 40mm Kingroon KP3S Printer…
Hercules Dekolampe – 3D-Druck für Mofa- & Moped-Fans Diese Dekolampe ist eine 3D-gedruckte Nachbildung des klassischen Hercules-Logos, ideal für Liebhaber von Mokicks, Mofas und Mopeds. Sie besteht aus mehreren farbigen Druckteilen,…
Este projeto apresenta uma técnica híbrida exclusiva que combina a precisão da impressão 3D com as características da termoformagem. O conceito consiste em imprimir moldes robustos que permitem moldar lâminas de plástico (como as de…
Některé z více druhů adaptérů vyžadují tisk s podpěrami (pouze na tiskové podložce). Upozornění: Deska na obrázku nepotřebuje adaptér a slouží pouze jako rekvizita pro focení. / 17cm diameter turntable adapter playing at 45 rpm. Some of…
Box for ESPDomofon with cover
The Chair 209 , a design classic, continues to be manufactured using traditional craftsmanship by the family-owned company Thonet. Its characteristic, elaborately bent wooden components are created by steaming different types of wood and…
Původní motor gramofonu byl nahrazen krokovým motorem EM 141 z jehličkové tiskárny EPSON. Motor má jiný průměr osy a nalisované ozubené kolečko. Řemenička má průměr a profil původní originální, ale střed přizpůsobený uvedenému EM 141.…
Do not print this, if you can buy original spare parts instead: Dewalt 868009-00 (Since they have been discontinued, this could be impossible.) Print material: Select the most heat resistant, electrical insulating material that you can…
This model is a bottom end cap with center hole for a Thermoflask 40 oz/1.2 L. Model is for supporting for tailstock end during laser engraving. The center support for the center hole could be removed. Clean up the model, and use as a…
Mofine M6 Synta Mount similar to my Mele mount but with 75mm hole to hole spacing
Adaptér na gramofonový singl má na sobě českou vlajkou která se používá na českých vojenských vozech a vrtulnících převážně těch z dílny VHÚ. Nutné je mít 2 barvy filamentu na vytisknutí. The adapter for the gramophone single has a Czech…
Instructions: Print with supports, may or may not need a brim depending on your printer.
Tachohalterung für Mofa/Töffli (Puch, Hercules, Sachs, Kreidler, DKW etc.) Halterung für Nachbauscheinwerfer für Mofa
v3 increases clamp force and widens base to improve lateral stability. A stand made for ~20 cm height FumoFumo plushes by Gift. This stand was made with sizing referencing the standard Komeiji Koishi plush. This stand fits loose, and is…
Deutsch Dieser Rahmen erspart das Bohren von Löchern ins Versicherungskennzeichen und verdeckt die scharfen Kanten, welche sonst oft die Abdeckplane aufschlitzen. Da das ursprüngliche Modell zu breit war, habe ich die Maße für eine…
Old chain sprocket on old mopeds need to be replace, this little hepler allows drilling the holes very precisely. The problem is that the original sprockets are welded, the replacement parts are usually screwed. This means that we need to…
NYE glasses I designed. You thermoform them onto your own face. Be careful not to burn yourself, I suggest using PLA plastic for this print. You can put a thin cloth over your face before forming it with a heat gun or boiling water. The…
Following the mofset upgrade guide here: https://3dprinterwiki.info/heatbed-terminal-burning-fix-with-mosfet-board/ but wanted a more solid mounting bracket than the one's listed. thicker frame, smaller footprint
Model nahrazuje původní výlisek ochranného kolíku pod víko umístěného v dřevěné desce šasi gramofonu TESLA NC-450.
Want to sell prints of this model? A commercial license is available on my Patreon: https://www.patreon.com/Elizabeth3D Like my free models? Support me on Ko-fi: https://ko-fi.com/elizabeth3d The Thermoformed Jellyfish Lamp is a honeycomb…
The shield should stay on by itself but a tiny bit of superglue may help if needed.
This is an attempt at making a replacement part for the ThermoFisher iCE 3000 atomic absorption spectrometer. At this time it is not known if the part actually works. There are two versions of the STL file, one with a little support added…
This is a flat printed sponge holder which needs to be heat shaped to get the final shape. I needed a place where I could put my sponge after washing the dishes and just laying it flat on the top of the sink made the sponge soak in water…
Printed with PETG, it was ~ 35 hour print which was quite lengthy in my opinion. I printed at 10% in-fill. Fits 4x standard 40 oz Thermoflasks. Has a mesh like location at the bottom for water to drain out.
It's a system of missiles for action figures armor. You can build small or longer missile, by printing 2 or three parts. Rectangular mount plate allows to connect rocket to any 3mm socket. Additionally designed PUNI MOFU sleeve adapter…
A mould for thermoformed (vacuum formed) inlays for packaging objects in (small) boxes. While I have added the STL files for the two moulds that I have made so far, these are only useful when you have objects of (almost) the same size…
Uchwyt trzymający ramię gramofonu :)
For years I've had a router/saw table, but could not see a practical way to secure the router to the mounting plate. Lots of holes in the plate, but none suited my Elu. Being now able to design and print parts, I came up with this. I uses…
Printer : i3 MK3 Rafts : no Supports : no Resolution : 0.20 Infill : 100% Filament : FLEX
Das ist eine Erhöhung Plattform für die Osmofresh Filteranlagen Pro / Live mit Keil um die Flschen für den Einlass schräg zu stellen. Gedurckt hab ich die in Silk PLA Silber. natürlich geht auch anderes Matterial. Gedruckt auf einem K1 in…
"Smog it up!" Bring the supreme, cockroach-faced dictator of the eco-villains to your display with this high-fidelity, static-pose figurine. This model is a definitive tribute to the classic 1991 vintage action figure, perfectly…
Druckne sie die Schraube am besten mit 100% Infill, da sie sonst brüchig ist und mit PETG.
Developed by the Aquatic Germplasm and Genetic Resources Center (AGGRC), the Vial Thermocouple Fastener (VTF) is designed to securely fasten thermocouples to Matrix cryovials, enabling precise and consistent temperature monitoring during…
Die Wandhalterungen schauen edel aus und sind mit nur einer Schraube schnell montiert und halten sehr gut. Eine Montage ohne großen Abstand zur Wand ist damit problemlos möglich.
Absaugung für Elu MOF 96 bzw. DeWalt DW 615
Resolution: 0.2 Rafts: Doesn't Matter Material: PETG/ABS/ASA Infill type: Gyroid Infill percent: min 25% Support: not necessary
Model składa się z dwóch części do sklejenia. Standartowe drukowanie na drukarce Prusa MK-4. Model dla ustawienia z obrotem w prawo o 20 stopni.
Very simple jar holder for the MOFIST 5g (5ml) jars found on amazon. No supports needed for the single row version. Great for cosmetics, concentrates or herbs. I added some rubber feet to keep it from sliding around. There are quite a few…
![[v3] FumoFumo Stand (2/3 Leg)](https://media.printables.com/media/prints/e8de1eed-62e5-4844-a58a-c2576b006d06/images/12869053_67630766-d660-400f-a8ff-0bda66a8d73b_1839c248-0e4a-41cd-a63b-fcab2e89bb4d/thumbnail3.png)
