30 modeli
(This is a work in progress. I will update this description later on). Links to 3D models that I used as part of my build but that I did not design or modify: Vertical bearing holders: https://www.thingiverse.com/thing:3731117
I replaced the 5A PSU with a 10A Meanwell one, which I mounted to the back, which got in the way of the included filament holder. I designed this to use the existing screws from the top handle and holes, while also adding in a filament…
New bottom plate with 80mm fan & riser feet for better cooling. I used an Arctic Silent F8TC with temp. sensor and the MPMD stays stable at 30°C. But any other 80mm silent 12V will do as well. I run Arctic Silent F8 fans on my Ender 3…
I designed this foots in order to make the MPMD a little bit quieter and fresh. Need to be printed in flexible material. 3 perimeters, 30% rectilinear infill. Is suspossed to be in position with the stock foots of the printer without…
I have all my printers runing with octoprint and my new MonoPrice Mini Delta is joining the club. But I need something to keep the raspberry pi and the printer in one single body. Also, wanna try the new raspberry 3 model A. So I searched…
I bought this printer mainly to use as a self-education tool. One of the things on my list was to redraw it in CAD to learn how delta printers work and then make a few personalized upgrades. So I took it all apart and plan to put it all…
The missing part to raise your MPMD off the ground and allow more air to cool the controller. It does a great deal to silence the fan and the flex filament will allow for some vibration absorption. I used some double sided tape to…
This endstop spacer will help you place the endstops of a Monoprice Mini Delta Printer at an identical position. Use the same endstop spacer for all 3 towers to avoid inconsistencies which you are trying to avoid by using this item. If…
BOM (1) arm from a 15mm binder clip (1) m3 bolt (<6mm preferred but if they are longer they can just run down the original clip holes (2+) 3/8" x ¼" neodymium magnets (Glue them in or they'll inevitably jump out) Bed Clip Alignment Remove…
Why another set of feet? Wait? Shoes for feet? wtf is going on? I recently printed the "Monoprice Mini Delta Feet Replacement" by 3Dgoon in PLA, as I didn't have Flex Filament yet. Now that I have some TPU 55D, I kinda liked the look of…
This is a filament spool holder for the 3d printer Monoprice mini v2 (also v1). A axial baring makes it silent and smooth. The spools can be stored on top of the printer without interfering while printing. There are two kind of handles…
Just some riser feet for the MPMD (V2)
So I've decided to change the linear bearings on my MP Mini Delta to LME8UUs. Those have a diameter of 16mm instead of the usual 15mm on the LM8UUs, so I needed new carriages. I've decided to model them up from scratch myself, and they…
I love all the Bearing Spool Holders. They allow smoother feed of filament. After printing this model, I found that the Inland spools did not fit on the new spool holder. So if simple increased the angle at the end and set it lower on the…
This is to hold a 5" mirror from Hobby Lobby ( https://www.hobbylobby.com/Crafts-Hobbies/Glass-Crafting/Mirrors/Round-Craft-Mirrors---5%22/p/22814 ) to a Monoprice Mini Delta Printer. I made it customizable though, so feel free to use the…
Thanks to ksihota for the measurements. I made mine 20mm tall, 1.6mm thick in most places, 0.8mm on the ends. MPMD shield. Check out my enclosure as well, they work together perfectly. Category: 3D Printer Accessories
Remixed base to fit on Monoprice mini delta bed Ø110mm. Category: Tools
What's this? This is a new extruder top for the Monoprice Mini Delta (MPMD), which is aimed at printing flexible filaments. does it work? I've been successfully printing TPU with shore-hardness of 55D, at a speed of 20mm/s (mk1) - 30mm/s…
This is my take on a compact top mounted spool holder for the Monoprice mini delta. It uses the 4 holes for the handle as the mounting point. I personally used the original screws, but I included a printable friction fit pin to use in…
Slip this on top of the Monoprice Mini Delta Printer and put a spool on top. Category: 3D Printer Accessories
Sized to use the spec power supply and inlet from a Voron V0.1 and has mounting for an SKR pico control board or raspberry pi.
Found the following button on Amazon for LED strip control and wanted to add it to my mini delta. https://www.amazon.com/gp/product/B01C4BFH7I/ref=oh\_aui\_detailpage\_o01\_s00?ie=UTF8&psc=1 Modified dcpdx's remix to house the button.…
Requires M2 screws to attach switch to adapter and uses original screws/nuts to printer. No loss in useable height. I connected wires to C and NC using a 5 pin JST-xh connector. Only tested on a V1 mini delta but I don't see why it…
Description This is a side product of my top plate for flexible filament for the MPMD , basically the mk3's mount solution as a stand-alone. I have the PTFE tube jump every now and then when printing non-flex filaments with Spconnol's…
My take on the binder clip bed retainer and tower shield for MPMD. M2.5 heat set inserts installed in the 2b part then gets installed under the platform. Tight fit to get between motor and the plate but it fits. M3 heat set insert for the…
Print 3, glue to 140mm glass disc, attach heater. https://www.amazon.com/gp/product/B077S4C3PL/ This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/38icEx0YRI4 Category: 3D Printing
for installing the walls is required m3 nuts and m3x10 screws
A Duet2Wifi borad mount for the Monoprice Mini Delta. Uses the original board's mount holes.
A clean simple caddy for all of your MP Mini Delta's printer tools. Including: Scraper 3 Hex Keys SD Card Case USB Cable Fits neatly behind top handle. I attached with hook and loop, but not mandatory. Caddy is labeled with machine name…
This is a filament spool holder for the 3d printer Monoprice mini v2 (also v1). A axial baring makes it silent and smooth. The spools can be stored on top of the printer without interfering while printing. There are two kind of handles…
