1283 modeli
Nice, little keychain for all F1 fans. 🏎🏁 Model created based on Darjan Petrić drawing: https://maxf1.net/wp-content/uploads/2017/02/Formula-1-2017-car-top-technical-drawing-by-Darjan-Petric-maxf1.net-eng-red.jpg Prepared files: stl gcode…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Hi! Let me introduce the whole grid of 2023 Formula 1 World Championship! Now you can show the world who your favourite driver is 🏎 In the files section you will find: stl files with each driver keychain from the list: Red Bull: Max…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Complete Board 200mm x 200mm. Update 2/7/21: Fixed F1 logo starting height. Credit for the individual circuits goes to this fine fellow. I altered them slightly to fit the size and dimensions I had in mind.
Wydruk około 19,29 €–23,58 € nettoWstępna wycena jednego wariantu
A simple display stand for the Speed Champions Lego McLaren Formula 1 Race Car (#76919). MMU/AMS friendly but they are not required for the single-color version. F1 logo is optional with alternative model files provided! This model…
Wydruk około 5,00 €–6,11 € nettoWstępna wycena jednego wariantu
This Throttle goes along with my G1000 setup . Its main feature is the simple design and slim layout, which (unlike regular Throttle quadrants) fits on a desktop. Instead of rotary potentiometers and a clumsy gear mechanism, it uses 100mm…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
Wydruk około 16,56 €–20,24 € nettoWstępna wycena jednego wariantu
These are cases for the VGA or HDMI version of the ZX Murmulator ZX Spectrum emulator PCB. I made it from a generic case design imported into TinkerCad and very extensively modified by scaleing and adding components and cutouts to fit the…
Wydruk około 4,46 €–5,45 € nettoWstępna wycena jednego wariantu
Stand for displaying your handheld emulation consoles
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Summary says it all! Just wanted to have the formula debossed in the part so I didn't have to look it up. Files include the .STL, .3MF, as well as 2 different .gcodes: 1 with ironing for a smooth top layer, and one without. For details…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Work steps Parts printing Connector 1 you need seven and connector 2 once. Assemble parts. Best on a suitable table. Needs some space. Insert cable. Leave some overhang so that you can shorten it when the LED strip is inserted. Fill the…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena jednego wariantu
This 3D model is designed specifically for professional filmmakers who wish to simulate camera arm movements with a car before actual shooting. It's tailored for 1:43 scale SUV model cars. Simply print it out and assemble the pieces using…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
100 3D-printed dice together with two boxes and lids are used to simulate radioactive decay, since schools rarely have the materials needed for real physical experiments on radioactive decay. The activity and its evaluation for the…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Work steps Parts printing Connector 1 you need six and connector 2 three times. Assemble parts. Best on a suitable table. Needs some space. Insert cable. Leave some overhang so that you can shorten it when the LED strip is inserted. Fill…
Wydruk około 15,11 €–18,47 € nettoWstępna wycena jednego wariantu
I recently bought a SDisk2 floppy emulator from myretrostore and it didn't come with a case, so I ended up designing one.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
F2 logo fob style keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best results…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
A very nice F1 logo for your desk or shelf. The logo and its stand are designed separately, so you can print it in 2 colors. The parts are snap-on in order not to have any problems with alignment. But my advice is to glue the pieces…
can be printed together or separately in other colours can be printed without support card contains F1 keychain the formula is very realistic Print in place kit card , Assembly required on my profile you will find a new version of the…
I made this to hang the LEGO McLaren Formula 1 (#42141) to the wall. Just screw the model into the wall (I used one of the two holes, with a drywall anchor, because it was hard to get perfectly level), then slide the car onto the hooks…
labubu with orginal version you can donwload here
If you would like to buy a set of these laser cut from acrylic feel free to contact me via [email protected] I've modeled the track outlines for every circuit Formula 1 will go to for the 2026 season Edit 1/9/2018 I fixed the scale for…
Update: I published the fiel in .obj format. It needs more work tant the .stl tho, but someone may find it helpfull. Hey there! This is my first upload! I'm uploading this 3d model of the Ferrari F1-75 from this year F1 championship. I…
Formula 1 2022 inspired front wing. You can print a big one devided in pieces or just scale the entire thing down and print a small one for anything you want. I'd recommand to print it in black simulating the carbon fiber or in any color…
**Update V2 in much higher detail. **I guess you can cut it with the new slicer by your own. Formula 1 Wall Art Easy to print for up to 1,2m length (6 parts) on Prusa MK3/4 bed size. Of course you can scale it the size you want. I…
Print out this awesome Formula One Kit Card Model and use it as a deco model or to express your love to engineering and the racing hobby! NOTE: check out the v2 of this model for better printability and other improvements at: Formula 1…
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
enjoy just donwload and like share my design
An easy to print and fast to assemble F1 Car Kit Card. Print it with supports for better print quality.
A simple but effective freestanding 3D F1 logo. The logo is designed with a discrete backing to keep the lettering upright and spaced. The backing also means no base is needed as the logo is self supported. Perfect as a home decoration or…
Formula 1 themed coaster with logo and optional holder. A clean and simple design with a shallow recessed logo to allow for easier cleaning and a raised edge to catch spillages. Print in a single colour for a simple solid coloured coaster…
Racing circuits building kit This is a part of a kit of racing circuits for all fans of motor racing, especially Formula 1 fans. Build all the Formula 1 Grand Prix race tracks. There are more than fifty different roads available. The set…
New for 4/24/24 - Minimal versions! Use the minimal versions to save time and filament if you don't intend to use a spacer. About The vertical mount supports nose-up or nose-down. The horizontal mount supports nose-left or nose-right. The…
Do you want to print as clear as you can on your printer? This tuned set of profiles for BambuSlicer/OrcaSlicer should help you print with clear as i've been able to tune on my X1C. I've tried several different parameters and come up with…
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE FORMULA 1967 RACECAR is a large 1:8 scale display model inspired by vintage 1960s formula racecars. MAKEABLE FOR EVERYONE: Largest single part: 95 x 83 x 199 mm (Further…
please follow, like and share if you want im upload anymore
I used 4 m3x30 and 2 m3x20 socket head bolts and nuts. I printed it with carbon fiber petg with 60% infill but I recommend the highest infill youre comfortable with. The grips are pla and 20 to 30% infill is fine for them.
F1 logo contoured keyring with raised logo. Simple keyring that can be printed in single or multiple colours. Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament. For best…
This Garmin G1000-like Flight Display is the free V1 version of the FlightSimDIY design, as available on the FlightSimDIY Discord . It includes the complete mechanical design of the G1000 NXI Bezel by FlightSimDIY. Some further upgrades…
You can print this model, which consists of multiple parts, with any 3D printer. It is necessary to change the color by changing the filament in only 1 piece. All you need are filaments of suitable colors(red, black, yellow, green, and…
Overview: Introducing the Formula 1 race car building kit, perfect for young engineers and racing enthusiasts! This kit features 11 precisely crafted parts and 9 screws, designed for easy assembly and disassembly. The construction process…
An easy to print and easy to assemble Formula One Car Kit Card! Assembly: print it out remove connector bars snap and glue together Finished!
For FDM - use the separated floor variant. I recommend 4% scale. This is an all-original model I designed specifically for 3D printing. I've tried to keep the assembly as simple as possible. There's an additional folder containing the…
change the colors to the right layers
Christmas day Steering wheel + BONUS Check our models, you will find there Christmas bonus. Stay in contact with us. From 25.12. a special competition on facebook with a photos of formula prints . Facebook:…
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE 2025 FORMULA ROOKIE RACECAR is a large 1:10 scale display model inspired by modern day formula racecars. SIZE / WEIGHT: Total assembly: Roughly 47 x 18 cm Filament: I used…
The next member of my Flight Simulation Sixpack family has arrived: A fully 3D printed Altimeter without need for any metal axles. Articulation by a standard stepper motor similar to the Attitude Indicator and an encoder for the Baro…
If you have any needs, please contact us - [email protected] Get PS-2 : https://quadmula.com/products/ps-2-profile-spacer Get PS-3 : https://quadmula.com/products/quadmula-ps-3-profile-spacer
The legendary McLaren-Honda MP4/4, one of the best F1 platforms ever designed, can now be yours (at a scale of 1:21 and without the ability to move, but still pretty cool). Designed to compete in the 1988 F1 season, and powered by a Honda…
F1 logo contoured keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best results…
Get PS-3 profiled spacer - https://quadmula.com/products/quadmula-ps-3-profile-spacer Capacitor use Rubycon ZLH series
A very easy-to-build Airspeed Indicator for flight simulation. It comes in two different versions: either articulation by an SG-90 micro servo or with a 28BYJ-48 stepper motor (recommended). UPDATE 2024-12-21: Fusion 360 Source added…
Hello! Just print it separately and then glue all the pieces together! I also attach the blender file if you want to do further modifications. I haven't finisihed mine but I thought it may be cool for other people to use the same model.…
This is a slightly modified version of the original Attitude Indicator by ZockZock . It provides a new designed bezel (as pdf) and a profiled indicator for two color print (white on black). Design and color scheme resembles the original…
Inspired by Daniel Norée's openrc F1 project I wanted to build a remote controlled Formula 1 car of my own design and fixing the ‘flaws’ of his car. I wanted my car to have a fully independent suspension utilising pushrods and not just…
This is a collection of drinks coasters depicting Formula 1 Circuits. All circuits should be accurate as of 2022. This is the full list of tracks for the 2022 Formula 1 season, ordered by the 2022 schedule: Bahrain International Circuit -…
F1 logo fob style keyring with punched out logo. Simple keyring that can be printed in no time at all! Keyring is approx 2mm thick with a punched out logo making it light, sturdy and quick to print with minimal filament. For best results…
Size 4 Tee for indoor Golf Simulator Print using TPU for best strength against hitting with golf club
We've designed this camera mount for our DJI Osmo Action 4 to fit the Quadmula Siren F5 Mini Split. This mount comes in two types, with just the record button hole or with a big hole for easier removal of the camera. RECCOMENDATIONS:…
Do you like interesting car models, especially F1, from the LEGO Speed Champions series? Give them a representative space in the frames on the wall. The available IKEA Sannahed 25 × 25 cm frames are ideal. First, print a test piece on…
Bring the thrill of Formula 1 to your home or office with this meticulously designed 3D printed F1 coaster set. Crafted for motorsport fans and lovers of sleek design, this set features six unique coasters, each depicting the outline of…
Circuit de Spa Francorchamps, Stavelot, Belgium, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
Disclaimer: This is not an official LEGO product. All design rights, trademarks, and intellectual property belong to the LEGO Group. This model is a fan-made recreation of the LEGO 2556 Ferrari Formula 1 Racing Car set, intended for…
Original on Thingiverse: https://www.thingiverse.com/thing:4177079
can be printed together or separately in other colours can be printed without support card contains F1 keychain the formula is very realistic Print in place kit card , Assembly required the back part needs to be glued there is an old…
My Flight Simulation Sixpack Family keeps growing: A fully 3D printed Gyro Compass. Articulation by two standard stepper motors similar to the Altimeter and an encoder for the Heading Bug adjustment. UPDATE 2024-12-21: Fusion 360 source…
cool table decoration
Wallart of F1 car, fully scalable :) Downloads, likes and shares will be appriciated. Happpy printing!
This is an outlet, inlet and electronics enclosure design the for SimHub Wind Simulator feature that allows to you to control fans via your racing simulation. You can implement effects like static wind or wind that changes with speed.…
A very easy-to-build Variometer for flight simulation. In analogy to my Airspeed Indicator it comes in two different versions: Either articulation by an SG-90 micro servo or with a 28BYJ-48 stepper motor (recommended). UPDATE 2024-12-21:…
Bring new life to second-hand mini PCs with this custom 3D-printed enclosure. This project turns an HP ProDesk 600 G4 Mini (and similar models) into a sleek retro-inspired console — perfect for emulation, streaming, or even as a…
And finally a fully 3D printed Turn Coordinator. Articulation by two standard stepper motors similar to the Gyro Compass. Adapted spacer frame is included in this model to hold the marking frame. Update 2024-12-21: Fusion 360 Source added…
Full set of dry Formula 1 tires on a Lewis Hamilton display stand. I've included a blank nameplate STEP file that you can add your own name to. Extrude your name .04" [1mm] on the blank. Someone requested I make this, so I looked to find…
Circuit de Monaco, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color fillament.…
🔁 Compatibility The 3D prints can be used on any Logitech G29 , Logitech G920 and Logitech G923 . The only print that's specific to a Logitech variant, is the lower bezel , which at the moment is available only for the G29, or PS4/PS5…
The Cessna 172 Project Altimeter Bill 'o Materials: 📦 3D Printed Parts 📦 Arduino Mega 2560 (can be shared with other components) 📦 Decal (You can use a shipping label) 📦 (8) M3x6mm screws 📦 (4) M3x20mm countersunk screws 📦 (3) BYJ-48…
This is a wall mount for the Lego McLaren Formula 1 car. It's twisted to give an artistic pitch, roll and yaw to the car, making it look like it's flying out from the wall. Locks into place onto the underside of the lego car, and mounts…
3D print file for QUADMULA Djinn F25
FPV stick Simulator PS5/4 FPV stick for PS5/PS4 controller. Inspired by Taranis QX7 stick I advise to print with supports on the plate
Mini AP is a autopilot unit for Flight Simulator 2020 - 3d print the parts, assemble, wire, download Mobiflight from www.mobiflight.com use the Adurino config and preset. Parts required. Pro Micro ATmega32U4 16MHz 5V Micro USB…
This 3D model is ideal for all the F1 and motorsport fanatics looking for a fun 3D printing project. The print comes out great when using resolutions like 0.2mm or 0.16mm, although some parts (like the suspension components) require a…
This minimalist piece elegantly captures the speed, precision, and aerodynamic design of these iconic racing machines . Ideal for motorsport enthusiasts and fans of sleek design, it adds a dynamic focal point to any room. You can scale…
Check out Poison Apple Prints on Patreon for loads more Disney inspired stl's! including Articulated Mushu and a Mulan inspired zen garden in honor of Chinese New Year! https://www.patreon.com/PoisonApplePrints The chopstick adapter is…
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code under Section 2/Avionics Bill 'o Materials: 📦…
A simple antenna mount for the T-mount stock IMRC Ghost receivers antennas. For QUADMULA SF3 To install the T-style antenna into the Mount, slide one side of the white part of the receiver into the mount, then flex the mount to about 90°…
Got a request for GAIM VR for Blaser R8. VR Simulator with Oculus 2 and 3. Have 2 friends from work who requested to make their GAIM VR more realistic to use the real rifle for training in GAIM VR. Both of them say they become better in…
Great keychain for Leclerc / Ferrari fans. There are 2 frames (with names or not). You can print which you like. I recommend printing the frame at 0.1mm thickness so that the keychain side is more solid. The inner part is same. It fits…
This model is similar to the Little Ouchie fidget going viral on Tik Tok. This one features a storage location fit for chap stick tubes. I could only find a larger off brand lip balm my kids had around to use as a reference. The lid…
So this is one of the most detailed and intricate model I have made. When I first saw the art for this I decided to challenge myself to building this. With a lot of detail and size it stands out amongst all the models I have created. The…
Today we'll be constructing the Cessna 172 Switch Panel. We'll be using a custom key/lock to rotary switch mechanism and a lot of 3D Printed Parts. THINGIVERSE FILES: Circuit Breakers: https://www.thingiverse.com/thing:4978861 Starter Key…
All credits to the original publisher BMDoubleU . This design has been modified from their original design. This is a tricky print, even with the best printers, I found I got the best results with the settings below. It will still take a…
Please note that this spool clock is designed and intended to use with the "new" style PRUSAMENT spools only. Either use a depleted new style (as of April 2026) Prusament spool or download the included Dummy Spool for use with this…
Wall mounting your Lego Technic model frees up valuable desk or shelf space, making it a great option for smaller rooms or offices. Custom designed bracket specifically tailored for specific lego technic supercars and provide a secure…
Build Video Here Config Video Here 🛒Buy it as a Kit or Assembled: https://captainbobsim.com/product/heading-indicator-kit-or-assembled/ Bill 'o Materials: x2 BYJ48 Stepper Motors (and Drivers) http://ebay.us/aS1yyZ or…
If you don't have yet the real fpv controller you can start training in a flight simulator using the sticks and your ps 4 controller. It's not the perfect solution but it will do the works till you get a real controller. Print tips: no…
I modeled some thumb-sticks for my Xbox one controller for Lift off; a FPV drone simulator. It has a 3mm screw hole in the mounts so if you want to make your own thumb-stick all you have to is make a thread 3-4mm deep thread to interface…
Today we'll be building an Airspeed indicator for the Cessna 172! This Thingiverse will soon become outdated. For the most up to date models, check out the GitHub: https://github.com/CaptainBobSim/The-Cessna-172-Project-V3 (check section…
Tiny little colored Formula 1 race car toy printed using generic PLA with 0.2 nozzle.
A modular cockpit panel for my Flight Instruments. The 100x100mm modules can be stacked vertically and horizontally as desired. Connection is done by M3x6 screws, M3 threads are included in the model on top and right side. UPDATE…
Introduction I wanted an F1 logo that looked nice that I could put on my keychain for fun, so I created this. It prints pretty quickly and with minimal materials and overall comes out looking pretty nice in my opinion. Printer I printed…
3D print file for QUADMULA Djinn F25 SP *The parts of Djinn F25 SP and Djinn F25 Split are completely incompatible. TPU BlackishGreen - Link
