Nail Holder Tool
Tested in PETG V2: https://www.printables.com/model/1200946-nail-holder-tool-v2
- Pobrania
- 6186
- Polubienia
- 2203
- Ocena
- 4,86
1832 modeli
Tested in PETG V2: https://www.printables.com/model/1200946-nail-holder-tool-v2
Cable Wall Clip for Nails Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Three sizes included, or scale it yourself for custom fits. Perfect…
This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…
🐌 Snail Pen Holder – This slow but steady snail is here to carry all your pens, pencils, and office essentials! A charming addition to your desk or workspace. Use tree supports on build plate only. ✅ Functional & Fun Design ✅ Holds Pens,…
Say goodbye to smashed fingers with the Nail Holder for Hammering! This essential DIY tool securely holds nails of five different diameters (1mm, 1.5mm, 2mm, 2.5mm, 3mm), making it easier and safer to hammer. Its ergonomic and durable…
The magnets are inserted into the clip during two pauses that are preset in the print profile (two magnets at each pause). After the magnets are inserted, you must manually resume printing. Printer stops at layer 142 and 314. This…
easy and fast to print
Tape Abroller und Deko zugleich. Diese Schnecke sieht auf dem Schreibtisch nicht nur niedlich aus, sondern hält auch immer etwas Klebeband bereit. Auf der einen Seite Praktisch, auf der anderen Seite Schick. Der Plug verhindert das das…
Simple non-marring tip to keep the metal from indenting on the wood. Once printed need to give it a couple of whacks to push the plastic piece on to the metal tip. Print settings I used: 0.2 mm, Prusament PETG, 0.4 nozzle, 15% infill, 3…
I designed this specifically to hold Holo Taco nail polish bottles. It will hold 8 on each row for a total of 48. It features framing along the base for stability. Printed in PLA. No supports needed.
This is a solid platform for mounting your Walksnail hd Avatar VTX kit to Sonicmodel AR wing 900. Fits perfectly nose for session camera. Just use a couple of drops of UHU Por to glue it to EPP. I strongly suggest to print it from at…
Beverage Can Opener against Broken Nails A keychain tool for opening beverage cans preventing broken nails or nail polish. Key Features Anti-slip curved thumb rest for user comfort with dirty or wet fingers Easy tab lead-in enables a…
Adhesive nails compatible with tesa refill strips in various sizes. I print mine in 0.1mm layer height to get a nicer definition on the plate and hook. The model is parametric for use in openSCAD with clear parameters for changing various…
This hanger will hold the Dewalt DCN692N 1st fix framing nail gun printed in PLA can be done with PETG, Nylon, Carbon fibre ect.. depends on your preference with 50% infill and the perimeters at 4
Haptic model for the visually impaired, based on the book " Překvapení skřítka Modrovouska " by Markéta Vítková. Read more about the project on PrusaLab's blog .
This hanger will hold the Dewalt DCN660N 2nd fix finishing nail gun printed in PLA can be done with PETG Nylon, Carbon fibre ect… depends on your preference with 50% infill and the perimeters at 4
Print instructions: Layer height: 0.2 (0.2 QUALITY Prusa Slicer Profile) Infill: 80% for better stability Perimeter: 4 Support with amplifier (included in 3mf)
Mounting the Goggle X Extension Board on top of the goggles as Caddx suggests makes the extension board really look like an afterthought. I've designed this housing to replace the right (screens facing you) Goggle LED panel. This module…
Summary: A mount for the Walksnail Goggles X Extension Module. Mounts to the top of the goggles. Uses a two piece design leaving only a low profile mount when not using the module. With the low profile mount it still fits nicely in the…
I printed in PLA Toy/Figurine Infill: 15% Layer Height: 0.20mm Supports: Yes, organic Keychain Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Thimble with a cutout that can be operated with longer nails. Inner diameter 15mm.
This small tool will help you keep the nail straight and protect your fingers when attaching your HO/OO rails. -- Ce petit outil vous aidera à maintenir le clou droit et protègera vos doigts lorsque vous fixez vos rails HO.
Just a quick redraw inspired by the design of the Worx magnet barrier for Landroid Automowers Printed in PETG, laying on the side with bed supports for more strength in direction of force (holding down the magnet band) 20% Infill, 0.3mm…
This is the first model that I have designed. In designing this model, I used the gridfinity specification drawings done by julie777 to get the required dimensions to fit into a gridfinity baseplate.
VTX Bracket for FlyLens 85 with Walksnail Mini+Moonlight 4K Upgrade Kit
Snail trap for your garden main part (jar) should be submerged into ground around 65mm, round hole minimum 125mm diameter. Inside jar goes drain part as an insert which with 3 glued pillars in should be easily removable up when needed,…
Einfach eine Schnecke Just a snail
Aufbewahrungsbox für Nagelfräser "COSLUS" Diese habe ich von Amazon und da war leider keine Box dabei... Das Coslus Fräsergerät ist 150mm lang und hat 20,7mm im Durchmesser Ich habe die in die Grundbox einsteckbaren Aufnahmeringe mit…
Two kinds of nail polish organizers with 5x5 compartments. The first organizer is designed for rounded bottles with a diameter max.28mm, the second organizer is designed for rectangular bottles with a size max.28x28mm. Dva druhy platíček…
A corner square for assembly of outside 90 corners using glue and nails or glue and screws, makes assembly quick + easy. Features: - Chamfers for sawdust to not skew alignment - Clamping holes - Screw holes for screwing to tablettop for…
This is the updated version of the Sunlu Dryer to use with the ERYONE Snail M2 filament dryer for the Prusa MK3s frame. Suggested settings: PETG for strength, 0.3mm layers. Infill: 15-20% Perimeters: 3 No supports
Introducing the Flex-Factor Tool ! Man, I've been dreaming about getting my hands on a compact gauge like this one for years! This bad boy is like having a 3D printing guru right in the palm of your hand. With its collection of 16…
This is a sticker divider for the generic nail polish racks you can buy off Amazon, AliExpress and etc.
Cable Wire Zip ties 3.6mm Width Mount Hole Nail Screw Dimension 2mm, 2.5mm, 3,mm, 3.5mm, 4mm & 5mm Heavy Duty No problem…… Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere Thank you ;-)
I designed this model to break away and remove support. Especially for places that are difficult to reach, such as holes or threads. You need two nails, diameter 2.5 mm. One as a tool tip, one to fix the tip with the help of the screw. I…
Simple clamp that fits a pretty standard 2" nail. I filed the nails roughly with a diamond file to increase their grip but that shouldn't be necessary. The nail diameter must be 2.6 - 2.65mm. Just force the nail through one clamp piece…
This is a custom nail polish holder that I made for the Vanreesa UV Kit since all the labels are on the caps.. Printed with a modifier to not include the top layers of the holder.
These side plates are designed for my iFlight Nazgul Eco DC 5" FPV drone to protect the electronics from debris while providing easy access to the FC's USB port and the VTX's SD card slot. At the front, there is a space for the Vifly GPS…
¾" panel holder for screwing or nailing panels together.
You will need a battery, a high voltage generator and conductive wire. And 3D printed components to keep the wires from the wood and each other. Hooks. To keep wires close to each other and free from the wood. Corners. To get the wire…
For velvetising nails, simply slot two 47.6x9.1x3.45 magnets in and go! Easy to print, no supports needed, print with any material. Silk PLA used in the photos.
This Glueable Nail is inspired by the “tesa Klebenagel”. You may glue it with any adhesive of your choice. The uploaded STL is designed to go with the “tesa Powerstrips SMALL”. The V2 files are slightly reduced in size to cover only the…
This magnetic screw and nail tray is a perfect addition to any workshop or DIY setup! 🛠 🔹 Features: ✅ Embedded Magnets: Uses 10x (20x10x3 mm) magnets for a strong hold on screws, nails, and small tools. ✅ Secure Storage: Keeps small…
This tricky birdhouse gadget cache is designed for one of our personal geocache hides, but it can easily be adapted for your own creative setups. It combines a visual red herring with a clever magnetic/nail-based locking mechanism, ideal…
Broken nails file grip replacement. Setup: Filament: PETG or PLA Nozzle: 0.4 Layer height: 0.2 mm Perimeters: 3 Infill: 15% Brim: recommended Supports: no It's possible to fix file in grip with glue (not needed).
The official way of mounting analog module to Walksnail Goggles X is no better than all of the promises of Caddx, so I've designed this thing. It replaces the upper cover and houses Goggles X extension board , Eachine PRO58 VRX , 3010…
100x160mm signs, featuring a snail and texts “Slow Ride” and “Take it Easy”, inspired by lyrics from the classic Foghat song. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as…
Was Looking for models with hidden nails, Then Decided to make something for myself. Filament: Sunlu High Speed PLA Infill: Gyroid, 15% Print Time: ~30min Believe the Nails used are 17 GA.x1-¼" Nail Sizes are weird feel free to modify as…
These flexible little snails are almost as fun to hold in your hand as their real-life counterparts. Print them and you too can experience the joy of handling snails as often as you want! Update! - I've fixed the baby snail so the…
Intro Sometimes the simplest tool is the most useful — and this one is no exception. This handy nail-holding tool lets you grip a nail securely while you hammer it in, keeping your fingers safe from accidental hits. It’s quick to print,…
V2: Better grip on the handles
Adorable 3D printed snail table lamp — a cute animal night light for kids room, bedside or cozy home decor. Fits the tBulb B dimmable USB LED module. id : se1008797 size : 115X198X150mm files : 3 pieces : 4 maximum size of the component :…
Sources: The Snail from: https://www.printables.com/model/262274-filament-schnecke-filament-freunde-filament-snail thx __ The Idea from: https://www.printables.com/model/1257063-toilet-paper-roll-holder Also the solution with black pupils…
Assortment of simple nail-in cable clips. Cable diameters: 3-12mm in 1mm steps. Nail diameter: 2mm Category: DIY
The Nail‑Saver Can Tab Opener is a compact and clever accessory designed to lift can tabs effortlessly—without hurting your fingers or risking broken nails. Its angled geometry slides easily under the tab, while the body provides the…
This Friendly Articulated Snail is a remix of thing:4847937 by Nebetbastet which is actually a remix of Isaiah 's Slug. This version just has the protrusion to allow the snail shell to attach. This blender remix allows easy printing with…
Supplies Needed 8x3 mm Magnets (2 required) & superglue to hold them in. Magnets are optional. Description A small jig to guide your screws and nails straight and to protect your fingers. The tip is printed with 50% infill so a hammer or…
Meet Sammy, a charming 3D cartoon snail model that will win your heart. Sammy boasts a soft body that's not slimy at all 😊. His big, expressive eyes add a touch of playfulness, making him a great buddy for kids but sure to delight adults…
Print settings I recommend printing this with PETG, ASA or ABS if it is going to be exposed to the sun. Works well with the layer height of 0.3 mm and 10% infill . No supports needed. Assembly For this snail trap, you only have to…
Intro A simple but extremely useful 3D-printed helper that lets you hold a nail safely while hammering , protecting your fingers from misses and slips. This tool grips the nail securely so you can focus on driving it in without fear of…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…
Tips for printing: Filament: PLA (only use PLA) Supports: No! Layer height: 0.16mm (optimal) (0.2mm also works) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! ⚠Warning⚠ Please store this…
Perfect for nail techs to display their art to their clients in the salon.
Remix for multi-material printers. Original model by 3Demon: https://www.thingiverse.com/thing:1700233 Print instructions E1 - Body E2 - Shell Second snail as sacrificial object for wiping.
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
This is a Nail Knot Tool for tying Nail Knots use for joining lines together. Commonly used in fly fishing but it can be used for tying on flies, hooks, or lures also. I printed it with .10 layers to assure it came out nice and smooth and…
Character Snail in cartoon Instruction Print body and shell separately in color you want and in horizontal position. Use support when you print shell. Snail has eyes and mouth in black color on one side. To achieve that use color change…
This is the True Nail from Hollow Knight.
Remixed to include 10 nails for a full set.
Various Cable Clips Diameter from 3-12mm up to 5 cables Nail-Diameter: 2mm
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I designed these hands for my costumes. Catwoman: https://www.printables.com/model/678691 They may also be useful for…
This model is a charming cartoon snail that wins everyone over with its huge, expressive eyes. It is designed for easy printing. Colors: The model looks great in a combination of flesh tones and black/white for the eyes, but feel free to…
I designed this rack to fish 48 holo nail polishes. It might fit other brands too but it wasn't tested. It is designed for bottles 28mm X 28mm. It is very sturdy and was designed to be "cat proof" as there has been an incident involving a…
No supports needed, just 35% infill to have the best sound quality. Materials: Cushion interior 4" speakers 8$ Amp from ali RCA connectors DC connector 12v Charger
This is a 4 color remix of Gary the snail it should be obvious where he is from, but anyways the colors I would use for this model is: black, white, pink, and sky blue.
A cable clip that requires no screws or nails. Put the clip on the cable and then slide it in between the wall and floor molding. Perfect for rentals or when you don't want to leave a mark. Changelog 2021-11-24: Added two variants of the…
Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because the Moonlight VTX heats up very quickly without an active airflow.…
BOM: Printed with ROSA3D High Speed PLA Gray Save yourself a trip to the hardware store! This is a complete set of classic, nail-in cable clips for routing wires along baseboards, walls, or door frames. Key Features: Nail Compatibility:…
Holder in two versions: single fake nail (prints in under 20 minutes) Up to 5 fake nails I'd recommend using 4 walls, the rest works with standard printer settings. If you print this model, don't forget to post a make :D
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
Nail Polish Shaped Can Tab Opener Practical tool designed to protect your manicure by opening soda tabs effortlessly. Featuring a unique nail polish design , it combines style and utility, making it a perfect gift for anyone who loves…
a full sized(maybe a little big) model of the pure nail from hollow knight. not cut so will need to be imported into 3d builder to be seperated, i may do this if i have time soon. Category: Scans & Replicas
One piece Most dangerous snailphone ! Buster call is coming
One piece Best way to call Don Quichotte Doflamingo
Nail polish organizer for my sweetheart 7 parts no supports no glue is needed
This nail holder is designed to hold 1-6mm nails. You can place them in the respective sized hole (each one being an increase of 1mm) and use the print to assure your nails are perpendicular to the nailing surface, while also saving your…
I made this great nail polish and nails accessories organizer for my girlfriend. You can put foam inside the organizer and then cut the foam for each nail polish, so it won’t slide inside. I wanted the drawers to “stick" on each other, so…
Can you open the puzzle box? Try it! You will find a hint of the box itself. I took the Nail Puzzle Box from mtairymd as template and redesigned it completely. For instructions and credits, please check…
Nail Polish Holder using the gridfinity system. Print Settings Printer Brand: Flashforge Printer: Adventurer 3 Rafts: No Supports: No Resolution: 0.25mm Infill: 20% - 3D Infil Filament brand: Sunlu Filament material: PLA Extruder Temp:…
Having lots of snails in my garden eating my veggies. I need to feed them with special snail food ;) after every rain the food was lost and I needed to put new food out there. Searching the Internet, I found some great products to buy or…
Pretty simple to print. 0.2mm layer height and I do three walls. You can mount it to the camera with screws (if you have some small enough) or glue. I prefer using glue and I haven't had any issues with it yet. I've printed it in TPU,…
The nail clipper holder makes clipping nails a less strenuous task for people with limited finger dexterity. It features a large force applicator so users can clip their nails by pushing down on it with their palm or hand. Print Settings…
This trap protects your salads from unwanted guests like slugs and snails. It can be adjusted in order to spare snails and only let slugs trough. Its optional “EmergencyRamp” makes that insects or little frogs who fell in accidentally,…
This is one of my favorite alien models. Created by Derek Kirkendall on myminifactory. https://www.myminifactory.com/users/derekkirkendall1 Very simply printed with PLA, with 0.2mm layer height. The head needs some support structures.…
Flexi/articulated snail -Print in place -No supports -Flexible -Articulated
I decided to make make a flully 3d printable brush design that can be adapted by future designs. In this first batch of brushes I will release a Bouldering/Climbing Brush, a Nail Brush, and a small Test Brush. The brushes print in about 4…
Original image re-encoder .py script: https://github.com/alexqzd/Marlin/blob/Gcode-preview/Display%20firmware/gcode_thumb_to_jpg.py Other guide: https://github.com/mriscoc/Ender3V2S1/wiki/How-to-generate-a-gcode-preview Script that I take…