Liczymy pasujące modele…
For Nilfisk One Performance Basic vacuum cleaner. No Supports. I did extra perimiters for 100% infill and faster printing. Also a brim was needed for me to get the print going, your mileage may vary. The new part is measured with calipers…
Wydruk około 0,68 €–0,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement for a broken hook for hanging the "Nilfisk Multi 20T" vacuum cleaner hose (maybe usable also for other types, but I haven't verified it). Náhrada za ulomený háček pro zavěšení hadice vysavače "Nilfisk Multi 20T" (možná bude…
Wydruk około 2,68 €–3,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nilfisk Multi II 30 T INOX VSC tube holder for aluminium 35mm tube. Tried finding this is shops to purchase, but was not available in my country.
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter that fits some of Nilfisk's hoses. Used with @luma's Airlock model. Needs support.
Adapter for the vacuum cleaner hose from Nilfisk buddy 2 to HT50 pipe.
This is an adapter for Festool for example a KS 60 and an vacuum cleaner from Nilfisk. Print Settings Printer Brand: Bambu Lab Printer: P1P Rafts: Yes Supports: Yes (Tree) Resolution: medium Infill: 50+% Filament: ABS
Replace your connector by forcing the hose off from the original coupler (don't cut the hose) by pulling hard on the hose and twisting at the same time. This will leave you with the Teflon ring still glued onto the hose. Now push the new…
The only difference between this model and the original is that the vacuum side is slightly smaller and has ribs around the inside. It is based on the R18TR-Hilti_VC20_40_60.stl file with the new part making the fit smaller. I printed the…
Power/pressure washer inlet filter housing for Nilfisk washer. Modeled this for a friend. Use the o-ring from your broken one and use some soap if the fit is tight. Thread is BSP ¾ with an small inbuilt negative offset so should have no…
Vacuum adapter for Makita BO3710 to Nilfisk
Customized version of https://www.thingiverse.com/thing:1571860 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1571860 Instructions Using the following options: Base_Diameter = 32.2 Base_Overlap = 35…
CZ: Rozdvojka pro připojení 2 originálních hadic k vysavači Nilfisk MULTI II 30 T (mělo by pasovat i na sérii Aero) EN: Splitter for connecting 2 original hoses to vacuum cleaner Nilfisk MULTI II 30 T (should fit also Aero series) 3D:…
These are extensions of the Nilfisk Vacuum Cleaner Buddy II, but it can be used with any vacuum cleaner that has the hose with an internal diameter of 35 mm. Total length 240 mm There 2 models: One has a small angled tip and the second…
For easy storage and acces i made this mount to hold the spraygun of my pressurewasher. Check if your spraygun is the same, the opening is 21mm. The holes will fit up to 5mm (wood)screws.
Für den Betrieb an einer Absauganlage mit einem 50 mm Spiralschlauch mit einer Spiralsteigung von 14,5 mm und einem Innendurchmesser von 50 mm an den Nilfisk Attix 30
I needed an adapter to connect my vacuum system to a 50 mm ID flexible vacuum tube. This hose adapter (50 mm ID) is able to connect to a DN 50 mm OD pipe directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…
Printed in PLA No supports
As the Nilfisk Attix 30 vacuum cleaner does not provide any convenient mechanism for storing the power cable and the hose, I designed a hook for it. The hook can be put at the rear side and once clicked onto the handle stays there…
Just a quick and rough solution for a broken vacuum adapter / attachment to the device.
I was tired of the handle when using power tools. The locking ring broke, which made me adapt to the camlock system. Preconditions to use this adapter: You need to cut the hose to use it. You need the female Camlock adapter:…
This filter adaptor is for the low pressure side of the Nilfisk pressure washer. It's a part that might break if someone add a force at the water intake connector. If broken, the machine is useless, while this filter adaptor is not…
I needed an adapter to connect my Festool CS70EB table saw to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
You can print it “as is” or you can print it in two pieces, and mount it together. I have made room for 3mm threaded inserts. It replaces the original mount.
Printed in 4 walls 35% infill out of petg-cf which came out incredibly strong. Print it with the large 57mm end on the build plate. Make sure normal support (snug) is on for the small section in the middle where the snap lock goes. I also…
Mouthpiece for https://www.thingiverse.com/thing:4748907 but which fits a NILFISK vacuum cleaner by having a constant inner diameter of 31,9mm for the first 20mm. It is a slight press fit onto the original part. Category: Hand Tools
The bracket for my Nilfisk Telescopic tube bracket split in half a few years ago. Now I finally sat down to spend the 5 minutes to create a replacement bracket. I printed using 0,6mm nozzle, 4 perimeters, 0,35mm layer height with no…
printed from flex filament
for vacuuming large pieces of rubbish such as wood shavings
I needed an adapter to connect my cyclone to a 50 mm ID flexible vacuum tube. This hose adapter (50 mm ID) is able to connect to a typical cyclone (for me it is an Dust Commander clone) directly. Print Settings Printer Brand: Anycubic…
i wanted to user my old vacuum cleaner for my Bosch multitool. I ordered Bosch 2609256d57 which also fits on GOP 12V-28 (Bosch blue series) as well as green Multitools. i designed a hose to fit my old Nilfisk GS-90 vacuum cleaner (i think…
My grilfried brike the part that on the stick where you put it in the vacuum cleaner it self. So i made a new one from ABS. Works good again.
Fits 35mm (inner diameter) accessories (slightly tapered, 34mm in beginning).
Easy print in place Nilfisk buddy 2 base Settings: 0.2 quality 100% infill for maximum holding power Pla - Abs -Petg are good for this print You need 3 pieces bolts M4 with washers and nuts. Njoy All comments are welcome Below is the link…
Print the splint with all wallls or 100% infil. I recommend 3-4 walls for the wheel. Use V2 as it requires less support to print. I used PLA but any material will do.
I needed an adapter to connect my Scheppach BTS900 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
Self made things, so my vacuum cleaners pipe can roll again, after i have miss the orignals wheels Print in PLA Print with 15 % infil
Adaptor that fits Nilfisk Buddy II 12 hose and Bosch Professional tablesaw and mitersaw, might fit other tools as well. Recommend printing in PETG or ABS for strengt and durability. Print upright with support for the bridge over the clips…
I needed an adapter to connect my Scheppach HBS261 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
Ersatzhalter für das Staubsaugerrohr vom Nilfisk Buddy 12L da der originale abgebrochen war und nicht als Ersatzteil erhältlich ist. Mit der originalen Schraube kann das Teil an das Staubsaugerrohr geklemmt werden. Ich hab es wegen der…
This is a plug for Nilfisk Attix shop vacs in situations where you want to transport the shop vac without the hose plugged in. To avoid dust escaping the gaping hole, use this plug. Mine is used on a Nilfisk Alto Attix 360 - 21 and is…
This part is combined with this camlock connector . I have printed mine in PLA and seems plenty strong for now. No big mystery regarding printing options. I used 3 perimeters, 0,15 layer height and 20% gyroid infill. I could se a future…
Rohrhalterung für den Nilfisk Multi II 30T. Der sollte auch kompatibel mit einigen anderen Nilfisk Saugern sein mit 35er Rohrdurchmesser. Für die Rohrhalterung zu verschrauben wird ein Gewindeeinsatz zum einschmelzen und eine M3X10…
Print it -→ Clip in on -→ vacuum your home to show printer invest was worth it and wife is happy
Replacement Parking Clip for Nilfisk Elite Series (Repl. 128350157) This is a replacement "parking clip" (tube holder) for Nilfisk Elite vacuum cleaners. The original part is known to be fragile and often breaks after prolonged use.…
Should be printed in vertical position, so the locks do not break. Supports are needed mostly to create large enough contact layer. OpenSCAD source included, I'm sorry for sparse comments and short variable names, but I'm too lazy right…
Hose (or cable) holder for Nilfisk Aero 31-21 vacuum cleaner (may be for similar from this range) - spare part. Print Settings Printer: BIQU BX Rafts: No **Supports:** Yes Resolution: 0.2 **Infill:** 50 Filament: Fiberlogy Nylon black…
Adapter to fit your vacuum cleaner to your sander. It is slightly conical but dimensions in the middle are about 22.5 inner and 25.5 outer, diameter in mm. Print in TPU. If you like my work, consider buying me a coffee:…
…Please be sure to hit like & post a make, I'd love to see your prints! Stop clips from accidentally opening when snagged while carrying the vacuum. Print standing up on bottom surface, mine were printed in PLA+ with a 0.6mm nozzle &…
Nilfisk Power Vacuum Hose Adapter / Connector The plastic tabs on my original Nilfisk Power P10 vacuum tube connector eventually snapped off, causing the hose to disconnect with even the slightest pull. Since the manufacturer doesn't sell…
This is a replacement part for the Nilfisk One dust bag holder. It comes in to versions: Nilfisk_One: A complet part, that can be printet in one go. Nilfisk_One_Parts: The model have been split in too and need glue to combine them.
Ideal for the Nilfisk Aero 26 and the Dewalt dcw210 Sander it has gotten me out of a pinch a couple of times I have other versions in the making which I will post when complete please bare with me I am extremely new to cad and self taught…
This a part designed to fit the Nilfisk rubber vacuum nozzle pictured (printed with part number 107401562). The rubber nozzle fits inside this part. It may be compatible with other vacuum nozzles, the port opening is 36mm across with a…
The adapter broke on my vacuum, so “unfortunately” I had to print one myself. Available at Onshape for you own modification: https://cad.onshape.com/documents/6b92f108b729211ad097d3e7/w/8c30fd4005eba666e55889fc/e/6ab03e459e514698aaa2a8bd
🇬🇧 English: This is a custom-designed replacement container for the Nilfisk Super Foamsprayer. It features a compatible thread for the adjustable foam head. Ideal if your original bottle is cracked or if you want to have multiple bottles…
The extension wand has become looser over the years, so I made an adapter between the extension wand and the handle to make a tighter fit. Printed with ABS 3 perimeters, 50% infill, 10mm brim width and support everywhere
I have slightly modified the thread so that it can be easily screwed onto high-pressure lances. It protects the thread when the lance is not in use. Thread type: M22 × 1.5 mm ******* Ich habe das Gewinde etwas angepasst, damit es gut auf…
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
Air filter holder with thread. ----------------------------- Drzak filtru se zavitem.
Adapter designed to fit a nilfisk bravo vacuum cleaner to my tools. This works for both a ryobi orbital sander and a black and decker jigsaw.
An adapter to connect Toolson giraffe sander hose directly into the Nilfisk Buddy II vacumcleaner. A nice tight fit, so you don't need to connect the two hoses, if you don't have a converter. It's made to stick out, for easy removal and…
Print with 4 layers. Needs supports (all). First proof of concept with PLAr is working fine. So PETg(r) will follow. Just an example that the Prusaslicer is good enough to bypass CAD-Programms;-) With a little bit more further work it may…
This an adapter to a 63mm air hose to a makita shopvac. It will work definitely with models: VC2000L VC2013L VC2512L, VC4210 and possible VC30xx series. Also works with Nilfisk ATTIX 33 and 44 as well as many other brands Print…
Mir ist das oroginal Verbindungsstück gebrochen. System 36/32
Nilfisk reinforcement clamp The “handle pipe” on my Nilfisk Aero 26 had small cracks in it that caused the hose to coupler to come loose. This clamp holds it together. I used a m3x16 screw to fasten it. If you need a new hose coupler,…
Dies ist ein Adapter für den Nilfisk Alto Aero 21 INOX auf ein DN40 Lehrrohr. Gedruckt mit 0.4er Nozzle, 0,2 layer, ohne Supports in PETG. -------- This is an adapter for the Nilfisk Alto Aero 21 INOX to a DN40 pipe. Printed with a 0.4mm…
Adapter to be able to fit a Nilfisk vacuum (34mm outer diameter) directly into the Cyclone Vacuum Dust Separator.
You'll find french explanations on my website : https://labidulerie.vicou.be/guide-sac-nilfisk-gm200-300-400/ I had lost the original part and it is no longer available on the market. It is inserted obliquely and clips from below. It is…
This adapter allows the use of the Makita 195436-7 hose for the VC013GL with a Nilfisk Aero vacuum.
Printed with eSun PETG upright at 0.16mm layers and 4 perimeters. Solid enough. Original adpated in Prusaslicer using modifiers. Other slicers may not work.
Recently bought a Nilfisk One vacuum cleaner. This came with 4 attachements. 2 of them are neatly stored inside the vacuum cleaner which is really convenient. But the other 2 just kept laying around the house. So i created a holder for…
Pressure washer nut was stuck and I could not open it with large pliers without damage. Pliers distort the nut. This part fits on top of the Nilfisk nuts with matching 15 grooves and a hexagonal nut for your large wrench. I printed it…
Mine broke so I designed a new one. I attached the sldprt in case you need to make changes. I printed with PETG 4 walls and 15% infill. In the picture it looks a lot larger, I've changed it to be a bit smaller.
1 organiser for spray gun + nozzels. 1 holder for spraygun. Screws or metal mount not included, i bought those at my local hardwarestore,
Adaptor that fits Nilfisk Buddy II 12 hose and Bosch Professional tablesaw and mitersaw, might fit other tools as well. Recommend printing in PETG or ABS for strengt and durability. Print upright with support for the bridge over the clips…
These are extensions of the Nilfisk Vacuum Cleaner Buddy II, but it can be used with any vacuum cleaner that has the hose with an internal diameter of 35 mm. Total length 240 mm There 2 models: One has a small angled tip and the second…
This is a replacement part for the Nilfisk One dust bag holder. It comes in to versions: Nilfisk_One: A complet part, that can be printet in one go. Nilfisk_One_Parts: The model have been split in too and need glue to combine them.
Recently bought a Nilfisk One vacuum cleaner. This came with 4 attachements. 2 of them are neatly stored inside the vacuum cleaner which is really convenient. But the other 2 just kept laying around the house. So i created a holder for…
Ideal for the Nilfisk Aero 26 and the Dewalt dcw210 Sander it has gotten me out of a pinch a couple of times I have other versions in the making which I will post when complete please bare with me I am extremely new to cad and self taught…
This an adapter to a 63mm air hose to a makita shopvac. It will work definitely with models: VC2000L VC2013L VC2512L, VC4210 and possible VC30xx series. Also works with Nilfisk ATTIX 33 and 44 as well as many other brands Print…
