Miniatur Trensenhalter (miniature bridle-stand)
Modelierung eines Trensenhalters für die Puppenstube, oder ähnliches.
- Pobrania
- 96
- Polubienia
- 8
- Ocena
- 0
178 modeli
Modelierung eines Trensenhalters für die Puppenstube, oder ähnliches.
Hytte (2025) is the first lamp designed by Scandinavian designer Karl Fartensen to be fully 3D printed. An fundamental drawing of a house ( "hytte" in Norwegian ) that every child on the entire globe can draw, was transformed into a…
Maiden Flight video: FPV and GoPro video: Build video: Build manual: https://docs.google.com/document/d/1JFHCjlPMPbSHwF589suOau9dG64Cw2EqH3ASaAP87Yc/edit?usp=sharing *Please contact me for more information: [email protected]
simple back scratcher
H0 (scale 1:87) coal bunkers/campsite 100mmx70mm with board. The boards can be inserted variable! H0 (Maßstab 1:87) Kohlebansen/Lagerplatz 100mmx70mm mit Bretter. Die Bretter können variable eingefügt werden! Print instructions Print file…
Die Idee ist abgekupfert von einem ähnlichen Teil gefunden auf Thingiverse. Ich war mit dem Teil dort aber nicht zufrieden und habe mir ein eigenes gestrickt. Passt mit stinknormalen Senkkopfschrauben an die Wand. Es gibt Menschen die…
This desktop moving sculpture adds beauty and interest to the daily grind. Based on the ratios of Theo Jansen's Strandbeest creations (http://www.strandbeest.com/), this mechanism is an interactive way of visualizing the motion of a…
I designed this as a wall mounting bracket to hold a set of 4 Jorgensen f clamps. The slot that the clamp sits in follows the curve of the clamp so it can't fall out. I have it set up on a French Cleat wall but it can be mounted directly…
Tried to find a 10 inch rack mount Mini-ITX computer case for my PFsense build. But coudn't find one on the market in the EU or here on thingiverse. So I designed my own. Features: 2U 10 inch rack mountable Fits a Mini-ITX motherboard 1…
Zum Verstauen der Goggles 3 in der original Tasche muss der Akku in die Brille auf die Linsen gelegt werden. Die Abdeckung dient zum Schutz der Linsen vor Kratzern und Staub. Gedruckt mit TPU 95.
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] The…
Features Receiver has been slimmed down to fit the shroud Two-tone shroud with full length picatinny rail Optional M3 brass inserts for bottom rail, for a bipod Stock is a bit barebones/minimalist, since I wanted it to be printed as one…
Walking Roboter
I needed to add my Jensen Switch to the rack, so i made a hole in one of the shelfs. Big thanks to McBig work :)
This model will enable the creation of a holder for Jorgenson style F-clamps. (Harbor Freight clamps will also fit. By combining a left end section, a right end section and an appropriate number of center sections, holders with variable…
Arachnobeest A lightweight, easy-to-print walking octopod robot based on Jansen linkages. With just a handful of bolts the entire robot can be built and controlled with parts in the standard XRP robotics kit. Assembly In Progress Control…
A mount that allows the Philips Hue MotionSensor to be installed in a corner.
Clamp rack (or holder) for Jorgensen E-Z Hold (medium duty) bar clamps. Multiple options exported as step format (3MF samples included for web preview). Mounting options: Wall mount: can be screwed to the wall but requires something to…
Version 2 of this model: https://www.printables.com/model/446181-jorgensen-f-clamps-holder This updated version has been split into 3 parts. A LEFT, a MIDDLE and a RIGHT. Print: 1x LEFT 1x RIGHT 1x to as many MIDDLEs as you need. They…
An upgraded Insence holder with angled placement of incense for better catchment of ashes. wider diameter, non-concentric placement of incense, angled by 11degrees.
Remix of https://www.thingiverse.com/thing:4690957 Jump pads / power pads for an EUC, in single piece and split versions. Use a slicer to mirror them to get both sides. I kept tearing the original design, so I modified one of the…
Hello Together i created a new Mini-Itx Case for my Opnsense Router. This Case is a very small. It fits also a additional PCIe card and a 2,5" ssd or normal hdd. In my case, i use a pico-psu with an external power supply. So it is not…
The video: The assembly: Step 1 Step 2 Step 3 Warning The position of the lines is extremely important for the functioning! The pieces: X4 - Pin Horse G X24 - Pin Horse P X4 - Automaton A X5 - Automaton B X4 - Automaton C X4 - Automaton D…
Ich habe diese Magnete verwendet: https://amzn.eu/d/4zjHF4L Wenn ihr die mitgelieferten Schrauben nutzen wolltet, müsste die Bohrung etwa 2,7mm breit sein, wobei die hintere Wand ebenfalls verdickt werden müsste (schrauben sind bei mir…
I wanted to make a decoration of the E5 for my desk, which I thought would have a model available due to its popularity… To my surprise, there was not! only paid models for a large amount of money (sometimes over 70 USD!) So I made my…
This is a compact enclosure for a SmartHome SunSensor to control shaders via HomeAssistant using an ESP32-C3 WLAN Controller and BH1750 Sensor. The sensor is powered via USB C port. The enclosure printed on PrusaCore One in two parts…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
Printed in 0.2mm layer height, PETG for having no problem with hot water. The fit is perfect for my “IDEAL Standard Waschbecken”, outside diameter of the model is 64 mm - I tried a few prototypes to get the size right.
Extended the frame plate to secure the bottom handguard to the rest of the frame. Created a custom angular mag (6 dart capacity). For the extended frame plate use two M3x8mm screws after drilling 2mm holes in the bottom handguard. Use the…
This is an updated version of the chisel holder I made for Jorgensen branded chisels. The interface is a bit tighter, it uses less plastic, but more importantly - it's much nicer to use. The older version would catch when you try to put…
Saw something like it on Instagram, could not find it on the Printable website. So I designed it myself in Fusion 360. 07-04-2026 Added some holes for M4 and M5 Inserts for some tabs to hold it square on the top or bottom. And added the…
Not having long enough clamps required for my tabletop glue up, I designed these clamp extenders to fit my Jorgensen Parallel clamps. This is a much cheaper alternative to buying them for around $20 a pop, especially when you need a few…
Replacement pad for jorgensen mini clamps. Print in TPU with 100% infill. third picture shows the original pad and the printed version next to each other (printed version is on the right.
The Muppet Show - Dr. Bunsen Honeydew - 1976-1981 3D printable model.
Office of Tomfoolery and Applicated Nonsensical Theory, sign Category: Signs & Logos
Am besten sollte der Trensenhalter nicht aus PLA gedruckt werden, da es kontinuierliche Belastungen nicht gut aushält. Pferdebild, welches ich als Referenz genutzt habe: https://pin.it/7r95Tm04d
Twinsen is the main character in the 1994 video game Little Big Adventure. Print instructions Category: 3D Printing Summary Twinsen is the main character in the 1994 video game Little Big Adventure.
Pin für den Regensensor, auch in einer Supportfreien Variante
Made for a miniature setup i am making a simple onsen stool, can use as regular miniature stool Best printed sideways I have one side that is completely flat. You can scale up and down to fit your need. I havent printed it yet but will…
Background Some crazy/retarded students love to play with the gas tap outlet in class. Flipping the switch is relatively minor (you can keep the master switch close), but they may tuck rubber fragments and sticky tape inside the outlet,…
These are almost exact replicas of the pads that come with the Jorgensen F style clamps, I was down to one clamp having both so I decided I would measure up the ones I had left and create some more. The ones that come with the clamps fall…
Looking for a simple, strong and effective FlashForge Pro Creator filament guide holder? You are in luck. This is a non nonsense replacement that is strong, allow you to position it any way you want and doesn't stand in the way when you…
Clamp holder for Jorgensen Clamps. Printed in PETG at 100% infill It's a little bit of a tight fit, but I wanted them snug
No nonsense FEP helper for installing a new fep sheet on the elegoo saturn Category: 3D Printer Accessories
This is a Shinkansen-rocket toy model for my children. It was produced under the influence of the following post. https://twitter.com/sado_kouta/status/1709158854850654271 My post is here. Please enjoy!…
A simple stand for the IKEA Tradfri Motionsensor
An easy to remove and attach ring of spikes for your wheelchair handles, to prevent unwanted ‘assistance’ from helpful strangers. Inspired by a print by JDanu (https://www.thingiverse.com/thing:5213822) but rebuilt for easier printing and…
Two piece, glue together, prints in any rigid material, I used PLA. Paint-on Support suggested only for the connector tab as show in image. I suggest 5 or 6 perimeters and 25% gyroid infill. If you open the Fusion 360 CAD file you can…
Trensenhalter - Bridle Holder Zusätzliches Modell mit Namensschild Benötigt 2x M3 Einschmelzmuttern und 2x M3x10mm Schrauben Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I would be happy about a…
The only other model that I could find was on Thingiverse and it wasn't very accurate. I will probably add texture to this model in V2. Printed with tree-like supports on the overhangs. The pictured print was scaled down 50% to conserve…
Stihl Motorsensengurt Clip männlich
At home I run Home Assistant to automate some things. My Sun screen with Somfy IO motor is connected to a Tahoma Switch. In order to automaticly close when it starts to rain, I wanted a rain sensor. Unfortunately Somfy rain sensors are…
These pads snap onto the bars of parallel clamps to help keep your work off of the bars — both to protect your work and to protect the clamps from wood glue. I print them in PLA on their side so that it holds up better when you snap them…
I designed a skirt for a 6" can-style recessed light to hide imperfections in the drywall and for a more attractive transition. It was designed for the Ensenior 6" slim recessed LED light but should work with similar lights of that style…
simple holder for 50g no nonsense super glue
A replacement pad for the larger Jorgensen E-Z Hold clamps. Fits 29.7 x 43.9 clamp bases.
M8 U bolt M4x6x6 heat-set inserts M4x10 screws
Mount for a Sorotec tool length sensor with a diameter of 34mm. Halter für einen Werkzeuglängensensor der Firma Sorotec mit einem Durchmesser von 34mm. https://www.sorotec.de/shop/Werkzeuglaengensensor-Sorotec-8mm.html Dient nur zur…
This custom spinner is specifically designed for the Consendo RC glider to allow the use of standard folding blades. Unlike the original thinner blades, this spinner supports 9.5x8 folding blades with an 8mm root, which are more…
I was disappointed, when the original mounting brackets of my TREDANSEN blinds from IKEA left a tremendous gap to the wall, which let more line shine through than necessary. Therefore i created an adapter bracket that can be slit into…
A newer better version is available: https://www.printables.com/model/469632-chisel-holder-jorgensen I designed this as a wall mounting bracket to hold a set of 3 Jorgensen brand chisels. I have it set up on a French Cleat wall but it can…
Linsenabdeckung für den Xiaomi Smart Projector L1. Gedruckt in TPU.
Dies ist ein Case für den Arduino Regensensor. Nicht wundern der Hintergrund ist ein Autositz.
This is a 3D printable mount for the Sorotec tool sensor. I made this to mount my toolsensor to my CNC Machine by 2 M8 T-Slot screws. Category: Machine Tools
Rectangle incense holder with small scraper
Housing for an Aqara water sensor with external rain sensor. The housing is designed to stand upright with an inclined sensor surface. The following Rainsensor can be used:…
Wer kennt das Problem nicht. Man möchte eine BüWa bei der Post abgeben und misst 3 mal nach ob die Maße von 35x25x5cm hinhauen und am Ende sagt der nette Mitarbeiter bei DHL das diese nicht durch seine Lehre geht... Da meistens ein…
I soldered the module onto the reed contact from the Aqara sensor. I also used a small amount of silicone on the top of the module to prevent water from getting inside when it is pushed in. If the MH-RD is slightly too wide, use a file to…
Description Language: DE, ENG, FR, CZ Configurable: YES CAD Program: FreeCAD DE Das ist mein bisher komplexestes Projekt. Es handelt sich um einen Werkzeuglängensensor, den ich für meine gebaute MPCNC benötige. Die von mir verbaute Feder…
Glue the face parts, chest parts, hip parts and leg parts.
FRIES stands for Freely Given, Reversible, Informed, Enthusiastic, and Specific. These are sturdy and easy to print. Students can pick a fry from the box and discuss it. This latest version has raised lettering on the fries so you can add…
Onsen bath bucket miniature i made for my japanese book nook have not printed yet but will update picture as soon as I do. I am not sure why model is rotated in file, just rotate it back to print on base.
Made for the board game Trains (as score markers). Made by a friend, but I have permission to upload the model. I chose to scale the model by 150% in the width and height dimension, to make it a bit bulkier. Also made for Trains: Track…
EN: Update 03-14-26: The solar panels I used probably only lasted two years due to inadequate sealing and rear ventilation. I made a new, adjustable, rear-ventilated version for flexible 12V solar panels. Since the original Velux…
Damit das Gehäuse im Bereich der Linse geschüztz ist, habe ich eine Schutzkappe aus TPU entworfen. Wie immer, ist auch diesmal die Fusion360 Datei mit dabei. Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Filament:…
https://cults3d.com/en/3d-model/gadget/pantograph-knife Here is the original model by _JENSEN. I thought it needed a little something more. Just clip this onto your waistband and slot the knife onto it. Pull the knife up to remove it.…
Mini Onsen bath made for my booknook I have other onsen furniture if you check my profile to go with it. It has the rocky surface and a seperate file for the water which can be printed in blue or colored.
Summary This is a custom-designed holder for Sally Hansen Insta-Dri nail polish bottles. It features nested wells for efficient storage, rounded corners for aesthetics, and a slightly domed top for a polished look. The layout alternates…
Mount for Parker's Adjustable bipod for the Shinkansen Smiley. Makes use of the holes in the front end for heat set inserts. It's designed for m3 screws, length dependent on the type of heat set inserts you put in. Please check the…
This character is from the anime kekkai sensen, it appears at the first episode. Sonic is a small white monkey with a large head and thin body with big yellow eyes. Sonic is a species of monkeys able to move with sonic speed. This model…
Office of Tomfoolery and Applicated Nonsensical Theory, sign Category: Signs & Logos
Why are 3D cookie cutters always funny figures? If you just need a set of decent rings, this is for you. Also good to be used for making beautiful rings of food like rice, minced beef or desserts. Comes in three sizes, 40, 50 and 60 mm…
Broke one of the plastic feet on my Pony sawhorse. Needed a quick fix. This one is an easy print that just slips on. Adjust scale for tighter fit. Made with PLA. https://ponyjorgensen.com/product/2-piece-clamping-sawhorses/
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ GST3D BLACK Transmission Distance: 4.6 PLA+ GST3D RED Transmission Distance: 3.5 PLA+ GST3D WHITE Transmission Distance: 4 Swap…
These are compression end caps for tents or other rolled things with a diameter of about 20 cm (7.9 inch). The caps are put on both sides of the tent roll and fixed with 25 mm (1 inch) wide straps. I use them for safe transport of a tent…
This is also a thing I daily use. It's not the best design, but it is very useful if you are forced to use contact lenses as me. It was originally desinged in 2022 and I updated this to match the latest sizes of cleaning tubes and so on.…
Screw this mount to the ceiling with an appropriate screw (e.g. 2 x 20 mm) and click the smoke detector to the mount. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: Doesn't Matter Category:…
Tired of getting advertisement right into your mailbox? Let me advertise this little but simple label to you. It prints in a quarter of an hour, and clearly states your disconsent about getting advertisement. Apply a piece of double sided…
I needed some replacement clamp pads. So, I made them. Here are some recommendations: I used Overture High Speed TPU 95A. I guess any 95A TPU would work. It seems pretty close to the stiffness and grip of the original clamp pads. If you…
Hansen Ridge is by far my favorite cross country ride anywhere. It’s a reversed lollipop loop along an exposed ridgeline with a cool lake at the end. Maps don’t do it justice, but in 3D you can get a feel for the scale of the ridgelines…
Jorgensen's steel I-bar clamps wall mount
Zum scharfstellen der Linse brauchen einige Modelle einen kleinen Schlüssel.
Fridtjof Wedel-Jarlsberg Nansen – Buste Description (FR) Ce buste de Fridtjof Wedel-Jarlsberg Nansen rend hommage à l’une des figures les plus marquantes de l’exploration polaire et de l’histoire humanitaire du début du XXᵉ siècle. Il est…
This is a replacement for the (broken) original LUCAS bakelite part. It now works well in the steering wheel of the Innocenti Mini of my brother! PRINTING I printed with black PETG, 0.16 mm layer height, 5 perimeters, support on build…
I made a logo for my dads old Jensen car. He bought a new Moto Lita steering wheel and wanted to add the original logo to it. I modelled the logo based on the original wheels that have this logo in the central hub. After printing i…
Protective housing for the outdoor sensor of a temperature sensor. https://www.amazon.de/gp/product/B077YNBM43/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
A Humidity Sensor Stand I designed my self to be a little more decorative. The uploaded Pictures are printed in a rather fine resolution. I printed it with a .25 Nozzle with .12 Layer height and .31 width for external Perimeters. Of…