128 modeli
Easy and fast to print in one piece and if you want, also in four pieces without support. The details make it nice to look at. Different versions available if you want to scale or modify it. Intended to be used as a 1:10 scale model but…
This model of a europallet is modelled in 1:87. The dimentions are after standaard dismentions for a europallet just scaled down. You can scale it slicer if you need it in another model scale. The easiest way to print the model upside…
Europallet made for use with 1:87 H0 scale train modelling. I print these in Prusament Vanilla White and then paint and weather them. Printing upside down is the best orientation designed for Prusa Mk3s+ with 0.25 Nozzle !
All Seven Koopalings, along with the clown cars they drive! All Koopalings are printed in 2 parts, the car and the koopa. The Clown Car should sit at around 2 inches tall to match a Bowser Jr amiibo (however I recommend double checking…
Because I liked the battery crates from https://www.printables.com/de/model/173788-customizable-stackable-beer-crate-for-all-types-of a lot but wished for a couple of modifications, I started redesigning them. My redesigne includes:…
Updated version of the table coaster for MMU2S or any other mutlicolor printer Layerhigh: 0.15mm Support: no need Material: PLA wood or what's in your shelter 😊
Europalette im Maßstab 1:10 als Tischuntersetzer euro pallet on a scale of 1:10 as a table coaster Print instructions -0.2mm Layerhöhe -kein Support notwendig -alle Materialien
These are models for europallet edges. These edges can be placed on europallets to create boxes. There are models of 1,2 and 3 segments high because that's what's most common. I printed them in wood pla with a 0,4mm nozzle, at a layer…
Designed for either 1, 3, or 5 8x3mm disc magnets . 8x2mm, 8x1.75mm, and 6x2.5mm models are also available If you're using an Opal 2.0 Side Tank, there is a convenient metallic pad under the top plastic cover. In this configuration,…
Europalette / Euro pallet Maßstab: 1:14,5 / Scale: 1:14.5
A nice design to remove ice and snow from the car windshield. Very resistant and proven effective. HexScraper remix. Really, really usefull in cold morning. I desing it from zero with example in HexScraper for learning. Print without…
I designed it in two parts so you can always design a different “wall” mount and just snap the router mount in place. The router mount itself is not too tight so it should be easy to mount the router in. It prints with no supports. I…
I bought a GE Profile Opal Nugget Ice Maker second hand and found that it had a bad helical drive gear. This is the only plastic gear inside the gear box and mates with the helical shaft on the drive motor. I have only printed it in…
EPAL https://en.wikipedia.org/wiki/EUR-pallet
linhof lens board for copal 0 shutter Category: Other
Improved quality drip tray that holds the inevitable drips from opening the ice maker while loading ice. I built this part because my unit did not come with the drip tray or we threw it out with the box. This was printed on the Prusa XL…
Linhof lens board copal 1 shutter Category: Other
Add a modern touch to your home or office with this stylish plant pot, designed for easy watering with its convenient hole. Printed in Opal Green PLA , it combines aesthetics with practicality. Perfect for keeping your plants healthy and…
measure from stock toyo copy lensboard. step file provided so you can modify to fit any shutter or lens you need.
Simple under desk mount with screw hols to mount your GL-SFT1200. The small holes ( to be screwed in are 3 mm ) and the bigger once are 12 mm for easy tool access. I printed mine in PLA to get it a bit more ridged. 0.6 mm nozzle and 0.3…
An 80mm² lens-board for the Horseman 45FA field camera with a Copal #0 (34.6mm) opening. This is modelled as accurately as possible from an original piece. There are 2 sets of files here - one I originally did in PETG and then a later one…
This is a europalette for the Playmobil forklifter 4476 fitting on the container. The design has rounded edges (fillets) similar to the original design Original Design by Ludwig-Concerto (…
Opal mount with a clip to hold the router in place.
I was tired of filling up the tank in my GE Opal 2.0 ice maker, so I designed and printed this lid of the original water tank. This, in combination with this float valve kit (or any similarly-sized float valve) will allow you to keep the…
I designed this paper holder to put in my garage, I used Jerryie's bearing https://www.printables.com/fr/model/541192-print-in-place-bearings which I modified for my wooden tree with a diameter of 23.5, I put the native solidworks file…
An 80mm² lens-board for the Horseman 45FA field camera with a Copal #1 (41.6mm) opening. This is modelled as accurately as possible from an original Copal #0 lens-board with a modified opening. Print instructions Printed in PETG 0.1mm…
A simple lens board to mount a lens with a Copal 0 compatible shutter for Toyo Field 45 (so 110x110mm). Print with 100% infill and 1.05 or more for extrusion multiplier to avoid light leaking in between layers. Also, it's a pretty snug…
My take on the Atropal is unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.
This is an adaptor to fit the Rollei Heidosmat 150mm f/2.8 to a Copal 3 Shutter. As different copal 3 may have different thread size, adjust the parameter in the SCAD code to your needs. Ensures that threads.scad and modules.scad files…
Utilize this adapter to mount Copal, Compur, or Prontor #0 shutters to M58 focusing helicoids. Various heights available to control the flange focal distance of your builds instead of reworking/reprinting entire camera bodies. (See my…
This simple bookmark is designed in Fusion360. 2 versions available, one with text and another without. Bookmark is 1mm thick but it can be adapted to 0,6mm to fit better to the book. Therefore adjusting Z scale in slicer can help. I…
Sinar lens board copal 0 Category: Other
Linhof lens board copal 3 shutter. I don't know if there is enough space to fit the ring and back of the lens but if you need it here it is. Category: Other
Sinar lens board copal 3 Category: Other
Sinar lens board copal 1 Category: Other
Replacement part that clips the Side Tank and GE Profile Opal 2.0 Ice Maker together Side Tank for 2.0 Opal Nugget Ice Maker https://amzn.to/4a2s2n2 * GE Profile Opal 2.0 Nugget Ice Maker https://amzn.to/3W22MaX * * Amazon affiliate link
Stack of 10 europallets scaled down to 1:120 scale. This is a remix of the original model by The_Hunter. The pallets have been twisted and offset against each other so that the individual pallets stand out better. Printed with Phrozen…
An 80mm² lens-board for the Horseman 45FA field camera with a Copal #1 (41.6mm) opening. This model has a 12mm extension on the front to allow better access to the controls of a given lens should it be required. This is modelled as…
Copal & Seiko Shutter Universal Label Print in A4 for later type copal shutter Updata 260909: Fix Copal No.1 label Update 260603: Add seiko types
I have redesigned the lens board, to be more tough (thick). I've also added a small hole on the back side, some shutters do have this option (prevents rotation). Print nicely from PLA (0.2mm with outer brim also - can help), I can…
Shutter Cone for Copal 0/1/3/3s, Shanel 5Bs
We kept just placing the scooper on top of the machine. Fit 10mm Magnets in the back
I wanted a way to attach my travel router to the telescope mounting plate for Astrophotography. With the powerbox the only cable that needs to leave the scope is the one power cable and all other cables are contained neatly on the scope…
An 80mm² lens-board for the Horseman 45FA field camera with a Copal #0 (41.6mm) opening. This model has a 15mm extension on the front to allow better access to the controls of a given lens should it be required. This is modelled as…
Eine Europalette im Kleinformat für auf denn Schreibtisch.
An organiser for the Opallac branded nail gel
Allows to mount the router sideways on a DIN rail. (Here used together with DC power supply and relay to power Starlink antenna) Uses M3 socket screws
Small europallet model, useful for decoration
So I originally made this so I could attach magnets to the case and allow it to mount to rack mount cases (using custom blanking plates with magnets as well). You can also mount this to the wall if need be. The tight is fit and you might…
This is a Copal #0 lens board for a Foťák view camera. Also compatible with Cambo Legend 4x5 and presumably other Cambo 4x5 view cameras. See the Pantarheon Foťák project (which is my project). Though the photo shows a gray-colored…
This is a Copal #1 lens board for a Foťák view camera. Also compatible with Cambo Legend 4x5 and presumably other Cambo 4x5 view cameras. See the Pantarheon Foťák project (which is my project). Though the photo shows a gray-colored…
This is a remix of an original design that no longer available. I have changed the dimensions to match the Opal as well as modified the bottom surface to easily attach it to dovetail bars with 3M dual lock strips.
I like this design more than any other lid I could find, but I didn't think it needed to be that tall or have the holes.
Sinar lens board copal 3s Category: Other
Europaleta lista para imprimir. Incluye clavos para dar la simulación donde van estos clavos. También si tienes una impresora con AMS podrás darle variación de color entre la madera y los clavos.
This is a ring to mount a Copal 0 (or similarly sized lens/shutter combo) to one of the M65x1 focusing helicoids. Did not think 3d printing such fine metric thread would work, but it does. Printed with 0.2mm layers, and a 0.6mm nozzle…
This is a Copal #3 lens board for a Foťák view camera. Also compatible with Cambo Legend 4x5 and presumably other Cambo 4x5 view cameras. See the Pantarheon Foťák project (which is my project). The board should be printed with black…
Linhof lens board copal 3s shutter. ( warning not 3 but 3s) I don't know if there is enough space to fit the ring and back of the lens but if you need it here it is. Category: Other
EPAL / EUR pallet scale 1:10 and 1:14
Post-Printing Assembly and Materials -To assemble, gently use a heat gun to warm up the ears so they do not break when pushing the top nubs into place. -Glue the small magnets into the top portion. -The bottom bar magnets can be glued in…
I broke the original aluminum clip, and made another one. and also one for my bike. -clip for headlamp, with angle, and straight V2 -clip to fix on helmet with 2 screws, with angle, and V2 right -clip to put on the handlebars of the bike,…
我为酒红90工业镜头设计了这个改装镜头组部件，方便安装在Copal 1快门上使用，建议用于大画幅微距摄影，经过测试发现对焦距离在20CM内可覆盖4X5画幅。 打印机：P1P 耗材：天瑞PETG-ECO
Model vytvořený přesně podle výkresu normované palety, snadné sesazení z dílů pro kvalitní tisk bez podpor. Autor publikovaného výkresu : WhiteTimberwolf – Vlastní dílo, CC BY-SA 3.0, https://commons.wikimedia.org/w/index.php?curid=10343729
I have only printed it on PLA. The first print warped on the edges but fixed this on the second print by setting the bed temperature to 70C for the first two layers and then lowering it to 45C for the rest of the print. No support is…
Found out about this led light some time ago on one of those “gadgets under 50” (it's actually 20bucks) videos from RandomFrankP https://www.amazon.com/dp/B097DHPS9T , brand name of the lamp may vary in other countries The lamp base is…
Découvrez le modèle 3D du Support Rouleau Papier Toilette Space Invader, une fusion unique entre le jeu vidéo rétro et l'objet du quotidien. Imprimez ce support en 3D et fixez-le facilement au mur de votre salle de bain, pour ajouter une…
This is an adaptor to fit the Lomo RF-4 360mm f10 lens to a Copal 3s Shutter. As different copal 3s may have different thread size, adjust the parameter in the SCAD code to your needs. Ensures that threads.scad and modules.scad files are…
Das erste Doppelzahnrad des Copal II Getriebes (11 mm Durchmesser und 40 Zähne; 3,6 mm und 10 Zähne) verschleißt nach einigen Jahrzehnten. Hier ist der Ersatz. Es muss präzise nachgearbeitet werden: Die Bohrung muss genau 1 mm sein, der…
This is an Episcopal Prayer Labyrinth. Follow the tops of the ridges with your finger or a pencil. I made it at 250% size in the photo provided.
This is a Copal #3s lens board for a Foťák view camera, a slightly smaller version of Copal #3. Also compatible with Cambo Legend 4x5 and presumably other Cambo 4x5 view cameras. See the Pantarheon Foťák project (which is my project). The…
Diseño El diseño del Dragon Opaleye de las Antípodas presenta un impresionante nivel de detalle y texturización en su superficie, reflejando autenticidad y una estética mística. Uso Este modelo es ideal como artículo decorativo para…
This fits on top of the water tank. Just add one M3 machine screw and one M3 nut and you're in business. M3 hardware is used to hold the scoop because the diameter must be small to fit the existing hole in the ice scoop that comes with…
Sometimes serendipity strikes and you get the perfect photo of something awesome and whimsical, such as a tree frog on a lotus flower bud: Sometimes, you just have to fake it. So I have files for you to fake your own Wallace's flying tree…
A planter for being hinged at a Europalette. You can print with the bottom on top, just a question of bed adhesion. Print Settings Printer: e3d Toolchanger Rafts: No Supports: No Resolution: 250 Infill: 20 Filament brand: dasfilament…
A friend is restoring a 1980's MK1 Vauxhall Nova and was having trouble finding clips for the headlights. After searching all the usual Sites I had no success finding any. Fortunately I work with some very talented people and had one of…
Meet Opal, a tiny pond companion carrying a garden of pastel gems. With a gentle smile, rounded feet and soft green colouring, this little geode frog belongs beside Pebble, Mica and Jasper—or on a desk of their own. Included files • STL…
I can't tell whether this is the coolest model I've made, or the dumbest. It is a wing section that you can put on your hand with the idea of putting it into a stream of air for playing with aerodynamics. This is modeled after the tip of…
TT Artisan 100mm F/2.8 "Trioplan" to copal No.1 adapter Cover 6x9/instax wide after conversion
Capture the enchanting beauty of iridescent gemstones with this 3D printable STL model of an Opal Dragon. This mesmerizing wyrm is perfect for adding a touch of magical wonder and shimmering color to your fantasy displays, tabletop games,…
Design Concept This 3D printed model replicates the standard Euro pallet, featuring detailed slats and precision design to mimic the real object in miniature form. Use Ideal for enthusiasts of scale models or dollhouses, this Euro pallet…
This is based on https://www.thingiverse.com/thing:1563872/files but adapted for printing Opal cases. The default opal case above is for a 3mm X 5mm Opals. Very small and usually not worth having an expensive case for it. But is still…
GoPal kompatibler Halter D22
The ice scoop that was included in my GE Opal 2.0 nugget ice maker was smaller and more angular (and didn't include a hole in the handle) so all the existing models wouldn't work so I created a new model in Onshape. Printed in .2mm layer…
An out of the way placement for the affordable travel router SFT1200. I created three parts including the main body that needs no supports, and the locking pieces to make it more stable. Can be permanently mounted using the 2 M4 screw…
In the Messel pit, close to Frankfurt, Germany, the so-called "Urpferd", the predecessor of nowadays horses was found. Fossils of the Messel pit are exhibited in various places, the most famous specimen is displayed in Darmstadt, see…
rubber protection for STOOTS OPALO or KISKA lamp to avoid damaging the battery and the aluminum lamp body print in TPU95A with support 80° and 80% infill 2020 12 20 new design more sustainable V4 protection caoutchouc pour lampe STOOTS…
10 inch rack plate to hold my Opal GL router
Copal 1 Extended Lensboard for Toyo Field Cameras This lensboard is for the 110mm front board of Toyo 4x5 field cameras, not the 158mm boards of the Toyo view cameras. I designed this from scratch in Fusion and it provides a 50mm…
Introducing our vibrant, easy-to-print RoboPals , perfect for educational giveaways, classroom activities, or as a fun addition to any collection! These charming RoboPals are meticulously designed to print without any supports, ensuring a…
La pieza permite enganchar un churro de piscina y usarlo como un ariete para mover barro o similar en inundaciones usando 2 palos de escoba estándar. Uno se usa para empujar y el otro se puede introducir dentro del churro si éste tiene…
Underdesk mount for GL.iNet Opal Hardware: - I used M6 bolts
1:1 copy of original GRAFLEX plate, 94mm x 93mm x 5mm, lens hole size is 65mm but i can adjust it if needed.
I remixed the BlackOpal as a frame with single arms, as I could not fit the whole frame onto my CNC machine. Another nice bonus is that you can just use smaller single pieces to reduce the size of basematerial needed. This is still not a…
This expanded the space by 7mm on the shorter side.
J'ai remixé un modele de support de scotch Skadis (que j'utilise dans mon atelier) en support pour Sopalin / Essuie tout pour qu'il puisse être fixé a ma crédence de cuisine a l'aide d'un simple morceau de double face. Quand ma cherie l'a…
Designed to mount my opal router directly to my SV503ED70 it should fit other SV and possibly other scopes as it utilizes the M4 20mm spaced holes normally used to mount a finder shoe. The base is designed to fit snugly around the 75mm…
![[STEP]Linhof lensboard copal 1](https://media.printables.com/media/prints/396331/images/3306763_da462ae6-1174-4b89-be79-019349e39165/c3cabf31fab3c0e72d46f6acd7b75486.jpg)
