2347 modeli
This design was inspired in 2 other designs in this site: https://www.thingiverse.com/thing:2339441 https://www.thingiverse.com/thing:2668159 Since I could not find for the original file to adapt it to my battery with protection circuit…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
OpenSCAD Fletching jig If you have any suggestions, leave them in the comments or open an issue on GitHub Overview Simple yet effective fletching jig that will adjust to all your needs. Intended to provide new archers with access to 3D…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE 14.12.23 Added supportless=true settings in insertAttachToWallEmpty(), which allows printing the model without supports. Description This is updated version of OpenSCAD library for HSW attachments - added metric nuts inserts from…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
A 3D printable DIN rail, works well in lab environments. DIN rail dimensions: top hat rail IEC/EN 60715-35 x 7.5 Should work with most DIN rail mountable circuit breakers, PLC's, relays, frequency drives,….. Printing: Print the model…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Update This design has been superseded by a newer version, Pill Puncher 2 Generator . Description I have seen several of these pill pusher/punchers for blister packs, but all upload only one size that is almost guaranteed to not fit your…
Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu
Use this OpenSCAD generator to create your own custom size box. Features: Set the length and width of the internal cells Set the number of rows and columns for the cells Set the height of the inside of the cells Set the height and…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
You can use the Openscad code to create chain mail of whatever size you choose. You are limited only by the build plate. This takes a while to render so don't be in a hurry.
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
This adapter inserts into certain cardboard spools to eliminate the cardboard dust from spinning against the spool holders. Fits cardboard spools: Polymaker Overture Inland (Microcenter) Duramic I personally use Polymaker filament because…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Borrowed from OpenSourcePinball https://www.thingiverse.com/thig:2268960
Wydruk około 11,72 €–14,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Každý potřebuje trochu jiné rozměry své krabičky… proto vznikl tento model. Nastavitelné parametry umožnují přizpůsobení modelu. Update: v1.1 - Přidán vnitřní pořadač (Add inside binder) Koukněte i na mé další modely .
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
Wydruk około 10,99 €–13,43 € nettoWstępna wycena jednego wariantu
Clamp caps get frequently lost. I found a replacement ... ... but i found it difficult to fit it in the slicer by trial and error. So i designed it new from scratch. (Afterwards i discovered this ) Anyway - here is my version.
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Peano-Gosper curves can be chained together along a straight line. They can also be turned along their hexagonal angles. Here they are chained to create a spring of sorts as the forces from end to end are distributed across hundreds of 60…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Nastavitelné parametry umožnují přizpůsobení modelu. Upgrade: v1.1 - verze bez knihovny BOSL2 v1.0 - Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
Connect your sander to your vacuum cleaner. The OpenSCAD source file is provided so you can modify the model to suit your need. This is for a Bosch ROS20VS random orbital sander. The inside diameter of the vacuum hose is 38 mm. The…
Wydruk około 1,25 €–1,52 € nettoWstępna wycena jednego wariantu
Features Set any of 8 light styles Set any of 8 fan styles Set overall diameter and thickness Set chain hole size (both top and bottom) Choose whether icon is raised or embossed (cut) Parameter Notes Chain hole Set the top hole large…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
OpenScad Script for Customizable LED Box to illuminate Signs or lithophane Pictures with easy Parameters and 3 Parts. Base (or Back) with optional Holes for mounting, Front to keep the Picture in place and a insert to hold the LEDs in…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
Nastavitelné parametry modelu umožnují v OpenSCAD přizpůsobení pro různé šířky desek. Doporučuji tisk z PET-G kvůli napružení.
Wydruk około 0,87 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to fasten down my hot tub cover with 2 inch webbing, so I purchased this “Plastic Buckles, Heavy Duty Side Release Buckles, Dual Adjustable parachute buckle, Plastic clips for Webbing straps (2 Inch,4 Pack)”. I needed to mount…
Wydruk około 4,08 €–4,99 € nettoWstępna wycena jednego wariantu
This is recursive Openscad code to generate Gosper curves of any order desired. By invoking gosper_f(order, x1, y1, x2, y2); it will create a Gosper curve of the desired order starting at (x1, y1) and ending at (x2, y2). You can play…
Wydruk około 14,85 €–18,15 € nettoWstępna wycena jednego wariantu
Excited for this year's OpenSauce so I brought "Bolt" the mascot to life in both finger puppet and bobblehead form! Fan art only. Just for fun, not affiliated with OpenSauce. Just a fun model to commemorate the fun and creativity that is…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
This is a remix of "Arduino Nano Every - Solder Holder". I modeled it in Openscad so that I could specify number of pins and width between the rows, so that I could print versions for Feathers and other boards. Print instructions To…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
H4Mのアクセサリーとして同梱されている50MHz〜6GHz20dBアンプのケース タイトに作成しているので、AMP基板によっては入らないかもしれない。 Case-AとBの固定は爪以外にボスの0.05mmのオーバーラップを利用している。 基板をCase-A,Bのボスで挟み込みガタツキを防止している。 一旦ケースを組み合わせると分解は困難。 開封にはCaseの天板と側壁の隙間に薄い板を差し込み、こじりあける。…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of the open source hardware “base” part for the Tinkerkit Braccio robot. I've ordered one and plan to use it when I build the robot. Printed at .2mm Infill 70% Fill Pattern: Adaptive Cubic It should be heavy enough when…
Wydruk około 16,68 €–20,39 € nettoWstępna wycena jednego wariantu
Replacement part for broken overfill cover in an old bathtub. With default parameters it fits a system with 42mm or slightly larger hole, where it is screwed with a single screw to the pipe on the other side. You can open the source in…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Print, push the two parts together with a firm grip until they snap in and then use simple double-sided tape to glue to desired drawer, cabinet door or other appropriate place. Once in place, you can insert/remove/replace paper labels as…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
Just a simple thinking stamp. I found standing the bottom after its complete with 220 or higher sandpaper helps
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
openSUSE Button based graphics Add a pin and decorate your coat or glue the hat and decorate your Christmas tree. I'd love to see some custom hats! Have some fun with kids during Christmas! Orignally designed as a free takeaway for the…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
This bowl was designed in OpenScad using some low poly features Then with some fun slicer settings removed the top and bottom so we can see the honeycomb infill. Also the 3mf file is set for a 0.8 mm Nozzle So if you are not using that…
Wydruk około 7,54 €–9,22 € nettoWstępna wycena jednego wariantu
box for arduino with cnc shield v3 , connector for nunchuc , 3 connectors Dupont for stepper motors XYZ, voltage regulator for fan and leds
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
logo opensource
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Squeeze to open jaw and it will automatically close when let go. Use it for binders, chip bags, or anything that needs organization.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
Gridfinity by Zack Freedman is an open source design specification for printable organizers to optimize shop workflow. I felt that the provided Fusion models, while able to make many bins, were limited. They are not completely parametric…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And I noticed that there's already a few people making various smaller or tiny printable versions. But what if you could pick out the exact size that you wanted? Maybe…
This is a recreation of Zack Freedman's gridfinity system in OpenSCAD, intended for both experienced OpenSCAD users to customize with added features, and also less-experienced OpenSCAD users to customize via options offered in the…
Customizable OpenSCAD version of the Honeycomb Storage Wall that allows creation of custom grid sizes and irregular shapes. About OpenSCAD OpenSCAD is a free software that facilitates parametric 3D modeling. If you are unfamiliar with…
update v2.1: See https://www.printables.com/model/380870-customizable-honeycomb-storage-wall-openscad/comments/807006 for more info about the fix. I also configured the default size to be a 10 x 10 grid that fits a Bambulabs printer.…
Gridfinity Extended OpenSCAD Model This is a recreation of Zack Freedman's gridfinity system in OpenSCAD. The Model attempts to accurately re-produce in OpenSCAD the Gridfinity bins as designed by Zack Freedman. It also adds extra…
Version 2 - adds support for round grids, adds a parameter for outer wall thickness, and allows for quick adjustment of $fn (facets) on circular grids. Summary Hexagonal grids are a nice design tool when printing. They are regularly used…
Custom Rugged Box OpenSCAD What This rugged box is loosely based off “ https://www.printables.com/model/258431-rugged-box-parametric ” but completely written from scratch in OpenSCAD. So, it can be customized either in the OpenSCAD…
This is a pretty reasonable approximation to a baseball using openscad. I designed it because I need a baseball that I can modify and incorporate in another design. Openscad is capable of importing the stl baseball available in…
Updated 16 Nov 2024 - inlude chamfer option Updated 27 Nov 2024 - Smooth Sides option I was looking for a parametric round container with a screw lid. Couldn't find anything on Printables but found an excellent design over at Thingiverse.…
I was looking for a parametric round container with a screw lid. Found the model by https://www.printables.com/@michaelh on Printables and adjusted it to my needs (see the differences section). The file is using the great…
Another empty spool project! This design is vertical to support a larger number of small removable bins. https://youtu.be/jEJRSixYPKs https://youtu.be/TCCuzT0m3fg Printing and Installation Tips The stand is highly recommended since it…
A printable OpenSCAD pirate ship. While it will definitely require support for the bow, the rest of the model should not. The OpenSCAD code isn't commented at all, so it may be difficult to follow. There are two main parameters -…
Someone requested a customizable collapsible sword - and here is my take on that topic. I decided to print a wand, but you can choose a more sword-like shape. Collapsed length, number and thickness of segments - your choice also affects…
The box is made from two parts, joined with cylindrical magnets: the Tray of Readiness , that serves as cover, and the Prisms of Holding , that serve as base. You can choose your own sizes; the premade STL use 4x2mm magnets (hexagonal) or…
Customizable sewing button for clothing repair. Requires OpenSCAD, BOSL2, and hkern0_scad libraries. Vary diameter, thickness, number of holes, size of holes, etc. 25-01-18: Added 9mm sample buttons 25-01-21: Added 11mm, 13mm, and 17mm…
Updated 17 July 2024 - Support for Multi Colour printing I was inspired by the concept of BuildBug's socket holders created in Fusion 360 https://www.thingiverse.com/thing:4696546 . But after a day messing around with Fusion 360 ( I'm not…
IMPORTANT NOTICE: This model was made for the previous version of Tony Youngblood's Dragon Egg. This is not (yet) compatible with the updated 2025 version; Tony has kindly re-released the older version, clearly labeled as “old”. I'm…
Design I found many knob designs, but none that were very flexible. I looked at the comments and suggestions of several of them and decided to create a customizable design that should satisfy just about everybody. Using the Customizer The…
Bistable Auxetic Structure Overview Structure expands to create dome and locks in place. Inspired by this video . The paper by Tian Chen and colleagues can be read here . Code linked here and available for download below. 3D Printing Info…
UPDATE : If you want different sizes and locations of your cells try my Print-In-Place Box 2.0 remix. Use this OpenSCAD generator to create your own custom size box. Features: Set the length and width of the internal cells Set the number…
A changeable 6-spoke pyramid pass-through twisty puzzle fidget toy, made famous on TikTok, including the OpenSCAD 3D model file used to create it. I was driven to create this model because everything that I'd found on the 'Net did not…
Simple easy print storage boxes, print great on 0.4mm nozzles. Made in openscad and fully customizable(comments in code). Use recycled pop bottle lids to reduce waste(a printable lid is included in case needed). This have a very good seal…
At heart a simple cylindrical screw container, but pimped up by lots of knurling options. Customizing: Download and install OpenSCAD , it's completely free (open source; Win/Linux/Mac), run it and load the scad file, customize parameters…
Small customizable rugged box done in openSCAD. Can also be used as openSCAD library. NEW NEW NEW: Version 2.0 out here: Have fun! Please like if you deem it useful! Tips welcome ;-)
Simple customizable box designed in openSCAD Only needs a few variables changing for a custom sized box to fit whatever you need. You can print at nearly any layer height to fit the quality you want. Note, that in the openSCAD file there…
When doing electronic projects there always is the search for a housing. There are plenty on the market but rarely fit the exact size and usually can not be considered cheap for some molded plastics. In addition much mechanical work needs…
Last update : 2025-11-13 Version 3: Added embedded M3 nut for attaching swing to top cap Simplified openscad code for easy customization Online customizer Version 2: Changed top cap connector to use m3 screws Fixed clearance issues…
I couldn't find a ready made case for the type of ESP32 I had ordered, so I made my own. This fits a 38 pin version of the ESP32-Wroom-32D with built-in antenna, labelled DevKitc V4. There are two versions of the body: a thick version…
This is a workable Pokeball that opens and closes. It is 3" in diameter. (7.62 cm) Made it for my nephew. Enjoy! The Squirtle in the picture is done by FLOWALISTIK, and can be found here, http://www.thingiverse.com/thing:319413 Thanks for…
Varying sized clamps for using has hold downs on CNC table. I find it best print them lying down on the side, support is needed. Generated Clamps Options for bolt sizes M3, M4, M5 Lengths 25mm-150mm Heights 3mm-100mm OpenSCAD The clamps…
Guitar Neck Rest to securely hold your guitar on it's back while you are working on it. This design is reworked from https://www.thingiverse.com/thing:413815 to use less plastic and print in 1/2 the time. Like with Daeken's post, the…
Note: This is a parametrized model using OpenSCAD. The STL is only provided as example/reference. See below on how to use the OpenSCAD file. I hadn't seen ventilated funnels until I came across the excellent "BETTER VENTILATED FUNNEL" by…
This is a huge STL. You can make it smaller by re-rendering the Openscad code with lower face numbers.
I was looking for a parametric round container with a screw lid and got pointed to the amazing model by tanius on Thingiverse and adjusted it to my needs (see the differences section). Make sure to put both .scad files in the same folder.
This fan duct will redirect air flow from 120mm/140mm fan at an angle. For example this can be used On the back of your PC to the VRM area on your motherboard. This is required when you're using water cooling, which could reduce cooling…
*Donating to access the files through my Ko-Fi supports me and enables me to dedicate more time and energy to creating for the community. These files are also available for free on Thingiverse, Printables and Cults3D with the option to…
lThis is an OpenSCAD design for sign letters, to be lit with commonly-available adhesive RGB LED tape (specifically this stuff from BTF-Lighting on Amazon, though any similar tape is probably compatible especially with parameter…
Many things have changed over the years so please consult the most recent documentation on github: https://openscan-org.github.io/OpenScan-Doc/hardware/OpenScanMini/ The current printable files are organized and documented here:…
Use this to add inserts to you honeycomb storage wall openSCAD models. See this item remixes for ideas. Notes on the module: Top/bottom/left/right/horizontal/vertical: all of these are considering the default original configuration of the…
This is a basic IO shield blank for ATX / ITX motherboards. I seem to have need for this quite often, and I like designing my IO shields in OpenSCAD since it's quick and easy to cut out the right holes using code (faster in my experience…
Hi, This is a printable replacement wheel for pretty much anything that needs one. It’s designed to be fast to print while still being stable and durable . I originally made it as a replacement wheel for my lawnmower —then a neighbor…
Creating borders for my honeycomb wall I found myself needing connectors that didn't match anything I could find. Additionally I was finding I really wanted features in different places from some of the pre-existing adapters I found…
The IKEA SKÅDIS pegboard is very useful to organise my 3D printing related stuff, such as filament spools , benchies in different colours and a variety of tools. Here on Printables you can find all kinds of great custom SKÅDIS compatible…
Waterproof (when using a silicone seal) Without nuts (tapered holes) Inside the mounting posts Variant hinge/clip only Need only M3x 30mm screw, twice for each clip Also published here
Ever wanted your Dummy 13 to have something with a little more oomph? Well, look no further than this pack of dummy 13 shotguns! With many different shotguns, ranging from full size ones to shortened ones, single barrel or double barrel,…
Introduction This OpenSCAD script can make a number of different warning signs and name plates. The shape, the picture and the text can be set in the "Customizer" of OpenSCAD. A few pre-made examples are in the folder "Examples". Create…
Introducing the WT-01, the world's easiest wire EDM conversion! Designed for all desktop 3D printers, the WT-01 easily converts your FDM machine into a metal cutting powerhouse! Electrical discharge machining, or EDM, vaporizes any…
I love the box by MrElektro @MrElektro_32607 . I wanted to create different size boxes and also wanted a stackable version. I've not had much luck editing and scaling .step files . I'm also concerned that things like wall thickness won't…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And so I set in motion the plan to print some honeycomb bits to fit on my wall. So I started out paramaterizing the honeycomb to fit. And I saw someone made pretty…
Gridfinity box/container generator. This is an ongoing project, with new features and box types being added over time. Right now it can make: Simple containers of any dimension. Containers with a hole/insert/bore to house an item. Options…
Edit 2023-06-15: Added tolerance parameters to make it easier to fit your parts into the wall. I wanted to create some of my own attachments for the excellent Honeycomb Storage Wall, and I'm primarily an OpenSCAD user. Here are some parts…
For use with OpenSCAD. Only set values and check the result. With a lid for the box. Zjednodušení návrhu krabičky v OpenSCADu. Stačí doplnit hodnoty a zkontrolovat výsledek. Možno použít i jako modul.
I needed a quick couple of SD card/SDcard cases the other day and downloaded/printed Rod's SD Card Holder remix of guytas's SD card labelling case - both are great models. However, I was looking for something a little bit smaller.…
This model has pleasing action as it morphs when you push on the sides. If you do an internet search on “fidget worm” you will see commercial versions. The OpenSCAD source file is included. You can make your own variations. The scad…
Fully parameterized/customizable Nametag created on OpenScad. Open the .scad file using OpenScad. All options should be on the right side of the window under “Custom Nameplate Configuration” tab. You can type ANY TEXT you want, choose its…
This design is totally customizable. The STL is the exact design as shown in the photos (two of it fit perfectly in a IKEA Moppe drawer I had). However you should ignore that and customize this to your own needs. Customizing Download the…
Edited remix of a great parameterized rugged box using OpenSCAD Waterproof when using a TPU gasket Uses M3x 30mm screws by default - two for each clip. Amazon link (Or other sizes, customizable) No nuts required, uses tapered holes…
This is a simple GPU anti-sag inspired by Sanguium's excellent design . However, I need something that can support 3.5 slots at about 53 mm total height which is far shorter than anything I could found. So I decided to make my own in…
This is a library of OpenSCAD modules for mounting Arduino boards. It has modules for creating enclosures, bumpers, mounting holes, punch out holes for jacks like USB and power and board dimensions. If you are making a custom enclosure or…
Gridfinity by Zack Freedman is an open source design specification for printable organizers to optimize shop workflow. I felt that the provided Fusion models, while able to make many bins, were limited. They are not completely parametric…
made som changes to the scad and tadaaa ther was an crossing .. :-) Category: Construction Toys
It's just a simple screw container with a slightly fancy knurling, but you can use OpenScad (it's free) to change the size and some knurling options to adapt it to your needs and taste. Diameter and height are inside dimensions. Download…
Update This design is superseded by the Version 2 remix . ----------------------------------------------------------- With this OpenSCAD generator you can create a custom box to store your magnets. To use it, simply set the magnet…
This is a fixed version of the Makerbot Skull which can be found at https://www.thingiverse.com/thing:308335 The original file would not work in openscad so Britt Scott fixed the stl file. Then I added a plug to remove the hole used in…
Open Swords is a project that aims to make historical fencing available to anyone! The only tools you need to build one of these is a 3D Printer, a heat gun, and a screwdriver! With the settings below, and a 3/4in dowel from the hardware…
Universal ball joint. This is intended to be used as a library in other projects. Example: use ; balljoint_ball(); balljoint_seat(); balljoint_nut(); If you need a smaller or larger ball joint, use "scale". Example: use ; scale(2)…
