2111 modeli
Version 2 - adds support for round grids, adds a parameter for outer wall thickness, and allows for quick adjustment of $fn (facets) on circular grids. Summary Hexagonal grids are a nice design tool when printing. They are regularly used…
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
OpenSCAD Fletching jig If you have any suggestions, leave them in the comments or open an issue on GitHub Overview Simple yet effective fletching jig that will adjust to all your needs. Intended to provide new archers with access to 3D…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE 14.12.23 Added supportless=true settings in insertAttachToWallEmpty(), which allows printing the model without supports. Description This is updated version of OpenSCAD library for HSW attachments - added metric nuts inserts from…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can use the Openscad code to create chain mail of whatever size you choose. You are limited only by the build plate. This takes a while to render so don't be in a hurry.
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
Customizable medals using OpenSCAD (100% free to download and use). Choose 6 different medals (blank, 1st through 5th place). Add up to 3 lines of text and easily adjust their spacing and placement. One layer change at 3.2mm - pick…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
This is a remix of Cisco's Flexy Pliers Its all done in OpenScad so it can be adjusted I also removed the pins and replaced with compliant mech and it seems to work :) I am going to do another remix with one smaller that will print in…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
This is a remix of Cisco's Flexy Pliers Its all done in OpenScad so it can be adjusted I also removed the pins and replaced with compliant mech and it seems to work :) In this ver 2 I removed the second set of pins since I am trying to…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
I made this wrench for my wife to use on milk jug lids and Arizona Tea jugs. It is completely customizable so you can make any specialty wrench you need, such as water bottles, RO filters, etc. Features Double ended wrench Single ended…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This snowflake is produced by 3 nth order double sided Koch flakes arranged in a circle along with 3 (n-1)th order Koch flakes to fill in the 3 small gaps.
Wydruk około 9,21 €–11,25 € nettoWstępna wycena jednego wariantu
This is a remix of Cisco's Flexy Pliers Its all done in OpenScad so it can be adjusted I also removed the pins and replaced with compliant mech and it seems to work :) This is a smaller version I made see…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
This is a rod clamp meant to be used with the Repkord RepRack but uses M3 screws instead of the plastite screws: https://www.printables.com/model/129024-reprack-system-by-repkord Fits Columbia MBF 1/2 inch EMT Conduit purchased at…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This generator will make all common size elastic threaders (also known as tape threaders and bodkins). It will also make a drawstring threader for round cord. How to use the Generator You may customize just about every dimension to create…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A great benchmark tool once you've got a million Benchys floating around. Experiment with different settings to get a good, clean print. Polymaker has published some suggested setting changes here . The recommended settings below are…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
This replacement blade fits snuggly onto the trimmer and printed with PLA and 100% infill it seems to stay alive way longer than the original ones - so far the battery is empty earlier than the blade is failing :-). Would be interesting…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Easy PLA print - all buttons are accessible while in the holders, remotes are easily removable, installs with two small screws. Parametric OpenSCAD file (FanRemoteHolder.scad) means you can measure any vaguely similar remote & insert the…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu
OpenScad Script for Customizable LED Box to illuminate Signs or lithophane Pictures with easy Parameters and 3 Parts. Base (or Back) with optional Holes for mounting, Front to keep the Picture in place and a insert to hold the LEDs in…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
What you can do with this Generator This is a super generator (merge of 7+ generators) to design most kinds and sizes of of looms and various tools for use with looms, knitting, and yarn projects. You can also make several commonly used…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
This is a remix of the wonderful work of fatdavemakes. I tried to make it watertight adding the lip that is present in commercial bottles. It seems to work fine with CocaCola lids, but test your fit. Your mileage might vary. Gcode is for…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
There are several pre-generated variants with reasonable parameters you can just use. Or you can use the OpenSCAD source to generate your own variant by simply altering the parameters. The important parameters: number of slots for lab…
Wydruk około 1,63 €–2,00 € nettoWstępna wycena jednego wariantu
Replacement part for broken overfill cover in an old bathtub. With default parameters it fits a system with 42mm or slightly larger hole, where it is screwed with a single screw to the pipe on the other side. You can open the source in…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
A simple OpenScad Lanyard Name Tag Open the OpenScad up and customize away. If takes in an included nefertiti stl file. Using 0.15 layer height Put a change filament point at height 1.1
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Jet another rotation indicator. But ist`s parametric! Need for a 8mmx2mm magnet and some super glue. To use parameter one needs a OpenSCAD Editor. Print instructions Update: New more Easy OpenSCAD File! 2022-05-01 Just use standard…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A non-tessellating stand for the tessellating double-T shapes. The only way to print the stand without supports is upside-down, so make sure bed adhesion is good! An OpenSCAD file is provided to change the size of the stand.
Wydruk około 0,59 €–0,73 € nettoWstępna wycena jednego wariantu
Gridfinity by Zack Freedman is an open source design specification for printable organizers to optimize shop workflow. I felt that the provided Fusion models, while able to make many bins, were limited. They are not completely parametric…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And I noticed that there's already a few people making various smaller or tiny printable versions. But what if you could pick out the exact size that you wanted? Maybe…
This is a recreation of Zack Freedman's gridfinity system in OpenSCAD, intended for both experienced OpenSCAD users to customize with added features, and also less-experienced OpenSCAD users to customize via options offered in the…
Customizable OpenSCAD version of the Honeycomb Storage Wall that allows creation of custom grid sizes and irregular shapes. About OpenSCAD OpenSCAD is a free software that facilitates parametric 3D modeling. If you are unfamiliar with…
update v2.1: See https://www.printables.com/model/380870-customizable-honeycomb-storage-wall-openscad/comments/807006 for more info about the fix. I also configured the default size to be a 10 x 10 grid that fits a Bambulabs printer.…
Gridfinity Extended OpenSCAD Model This is a recreation of Zack Freedman's gridfinity system in OpenSCAD. The Model attempts to accurately re-produce in OpenSCAD the Gridfinity bins as designed by Zack Freedman. It also adds extra…
Custom Rugged Box OpenSCAD What This rugged box is loosely based off “ https://www.printables.com/model/258431-rugged-box-parametric ” but completely written from scratch in OpenSCAD. So, it can be customized either in the OpenSCAD…
This is a pretty reasonable approximation to a baseball using openscad. I designed it because I need a baseball that I can modify and incorporate in another design. Openscad is capable of importing the stl baseball available in…
Updated 16 Nov 2024 - inlude chamfer option Updated 27 Nov 2024 - Smooth Sides option I was looking for a parametric round container with a screw lid. Couldn't find anything on Printables but found an excellent design over at Thingiverse.…
I was looking for a parametric round container with a screw lid. Found the model by https://www.printables.com/@michaelh on Printables and adjusted it to my needs (see the differences section). The file is using the great…
A printable OpenSCAD pirate ship. While it will definitely require support for the bow, the rest of the model should not. The OpenSCAD code isn't commented at all, so it may be difficult to follow. There are two main parameters -…
Another empty spool project! This design is vertical to support a larger number of small removable bins. https://youtu.be/jEJRSixYPKs https://youtu.be/TCCuzT0m3fg Printing and Installation Tips The stand is highly recommended since it…
Someone requested a customizable collapsible sword - and here is my take on that topic. I decided to print a wand, but you can choose a more sword-like shape. Collapsed length, number and thickness of segments - your choice also affects…
The box is made from two parts, joined with cylindrical magnets: the Tray of Readiness , that serves as cover, and the Prisms of Holding , that serve as base. You can choose your own sizes; the premade STL use 4x2mm magnets (hexagonal) or…
Customizable sewing button for clothing repair. Requires OpenSCAD, BOSL2, and hkern0_scad libraries. Vary diameter, thickness, number of holes, size of holes, etc. 25-01-18: Added 9mm sample buttons 25-01-21: Added 11mm, 13mm, and 17mm…
Updated 17 July 2024 - Support for Multi Colour printing I was inspired by the concept of BuildBug's socket holders created in Fusion 360 https://www.thingiverse.com/thing:4696546 . But after a day messing around with Fusion 360 ( I'm not…
IMPORTANT NOTICE: This model was made for the previous version of Tony Youngblood's Dragon Egg. This is not (yet) compatible with the updated 2025 version; Tony has kindly re-released the older version, clearly labeled as “old”. I'm…
Design I found many knob designs, but none that were very flexible. I looked at the comments and suggestions of several of them and decided to create a customizable design that should satisfy just about everybody. Using the Customizer The…
Bistable Auxetic Structure Overview Structure expands to create dome and locks in place. Inspired by this video . The paper by Tian Chen and colleagues can be read here . Code linked here and available for download below. 3D Printing Info…
UPDATE : If you want different sizes and locations of your cells try my Print-In-Place Box 2.0 remix. Use this OpenSCAD generator to create your own custom size box. Features: Set the length and width of the internal cells Set the number…
A changeable 6-spoke pyramid pass-through twisty puzzle fidget toy, made famous on TikTok, including the OpenSCAD 3D model file used to create it. I was driven to create this model because everything that I'd found on the 'Net did not…
Simple easy print storage boxes, print great on 0.4mm nozzles. Made in openscad and fully customizable(comments in code). Use recycled pop bottle lids to reduce waste(a printable lid is included in case needed). This have a very good seal…
At heart a simple cylindrical screw container, but pimped up by lots of knurling options. Customizing: Download and install OpenSCAD , it's completely free (open source; Win/Linux/Mac), run it and load the scad file, customize parameters…
Small customizable rugged box done in openSCAD. Can also be used as openSCAD library. NEW NEW NEW: Version 2.0 out here: Have fun! Please like if you deem it useful! Tips welcome ;-)
Simple customizable box designed in openSCAD Only needs a few variables changing for a custom sized box to fit whatever you need. You can print at nearly any layer height to fit the quality you want. Note, that in the openSCAD file there…
When doing electronic projects there always is the search for a housing. There are plenty on the market but rarely fit the exact size and usually can not be considered cheap for some molded plastics. In addition much mechanical work needs…
Last update : 2025-11-13 Version 3: Added embedded M3 nut for attaching swing to top cap Simplified openscad code for easy customization Online customizer Version 2: Changed top cap connector to use m3 screws Fixed clearance issues…
I couldn't find a ready made case for the type of ESP32 I had ordered, so I made my own. This fits a 38 pin version of the ESP32-Wroom-32D with built-in antenna, labelled DevKitc V4. There are two versions of the body: a thick version…
Varying sized clamps for using has hold downs on CNC table. I find it best print them lying down on the side, support is needed. Generated Clamps Options for bolt sizes M3, M4, M5 Lengths 25mm-150mm Heights 3mm-100mm OpenSCAD The clamps…
Guitar Neck Rest to securely hold your guitar on it's back while you are working on it. This design is reworked from https://www.thingiverse.com/thing:413815 to use less plastic and print in 1/2 the time. Like with Daeken's post, the…
Note: This is a parametrized model using OpenSCAD. The STL is only provided as example/reference. See below on how to use the OpenSCAD file. I hadn't seen ventilated funnels until I came across the excellent "BETTER VENTILATED FUNNEL" by…
This is a huge STL. You can make it smaller by re-rendering the Openscad code with lower face numbers.
I was looking for a parametric round container with a screw lid and got pointed to the amazing model by tanius on Thingiverse and adjusted it to my needs (see the differences section). Make sure to put both .scad files in the same folder.
This fan duct will redirect air flow from 120mm/140mm fan at an angle. For example this can be used On the back of your PC to the VRM area on your motherboard. This is required when you're using water cooling, which could reduce cooling…
lThis is an OpenSCAD design for sign letters, to be lit with commonly-available adhesive RGB LED tape (specifically this stuff from BTF-Lighting on Amazon, though any similar tape is probably compatible especially with parameter…
Use this to add inserts to you honeycomb storage wall openSCAD models. See this item remixes for ideas. Notes on the module: Top/bottom/left/right/horizontal/vertical: all of these are considering the default original configuration of the…
This is a basic IO shield blank for ATX / ITX motherboards. I seem to have need for this quite often, and I like designing my IO shields in OpenSCAD since it's quick and easy to cut out the right holes using code (faster in my experience…
Hi, This is a printable replacement wheel for pretty much anything that needs one. It’s designed to be fast to print while still being stable and durable . I originally made it as a replacement wheel for my lawnmower —then a neighbor…
Creating borders for my honeycomb wall I found myself needing connectors that didn't match anything I could find. Additionally I was finding I really wanted features in different places from some of the pre-existing adapters I found…
The IKEA SKÅDIS pegboard is very useful to organise my 3D printing related stuff, such as filament spools , benchies in different colours and a variety of tools. Here on Printables you can find all kinds of great custom SKÅDIS compatible…
Waterproof (when using a silicone seal) Without nuts (tapered holes) Inside the mounting posts Variant hinge/clip only Need only M3x 30mm screw, twice for each clip Also published here
Introduction This OpenSCAD script can make a number of different warning signs and name plates. The shape, the picture and the text can be set in the "Customizer" of OpenSCAD. A few pre-made examples are in the folder "Examples". Create…
I love the box by MrElektro @MrElektro_32607 . I wanted to create different size boxes and also wanted a stackable version. I've not had much luck editing and scaling .step files . I'm also concerned that things like wall thickness won't…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And so I set in motion the plan to print some honeycomb bits to fit on my wall. So I started out paramaterizing the honeycomb to fit. And I saw someone made pretty…
Gridfinity box/container generator. This is an ongoing project, with new features and box types being added over time. Right now it can make: Simple containers of any dimension. Containers with a hole/insert/bore to house an item. Options…
Edit 2023-06-15: Added tolerance parameters to make it easier to fit your parts into the wall. I wanted to create some of my own attachments for the excellent Honeycomb Storage Wall, and I'm primarily an OpenSCAD user. Here are some parts…
For use with OpenSCAD. Only set values and check the result. With a lid for the box. Zjednodušení návrhu krabičky v OpenSCADu. Stačí doplnit hodnoty a zkontrolovat výsledek. Možno použít i jako modul.
I needed a quick couple of SD card/SDcard cases the other day and downloaded/printed Rod's SD Card Holder remix of guytas's SD card labelling case - both are great models. However, I was looking for something a little bit smaller.…
This model has pleasing action as it morphs when you push on the sides. If you do an internet search on “fidget worm” you will see commercial versions. The OpenSCAD source file is included. You can make your own variations. The scad…
Fully parameterized/customizable Nametag created on OpenScad. Open the .scad file using OpenScad. All options should be on the right side of the window under “Custom Nameplate Configuration” tab. You can type ANY TEXT you want, choose its…
This design is totally customizable. The STL is the exact design as shown in the photos (two of it fit perfectly in a IKEA Moppe drawer I had). However you should ignore that and customize this to your own needs. Customizing Download the…
Edited remix of a great parameterized rugged box using OpenSCAD Waterproof when using a TPU gasket Uses M3x 30mm screws by default - two for each clip. Amazon link (Or other sizes, customizable) No nuts required, uses tapered holes…
This is a simple GPU anti-sag inspired by Sanguium's excellent design . However, I need something that can support 3.5 slots at about 53 mm total height which is far shorter than anything I could found. So I decided to make my own in…
This is a library of OpenSCAD modules for mounting Arduino boards. It has modules for creating enclosures, bumpers, mounting holes, punch out holes for jacks like USB and power and board dimensions. If you are making a custom enclosure or…
Gridfinity by Zack Freedman is an open source design specification for printable organizers to optimize shop workflow. I felt that the provided Fusion models, while able to make many bins, were limited. They are not completely parametric…
made som changes to the scad and tadaaa ther was an crossing .. :-) Category: Construction Toys
It's just a simple screw container with a slightly fancy knurling, but you can use OpenScad (it's free) to change the size and some knurling options to adapt it to your needs and taste. Diameter and height are inside dimensions. Download…
Update This design is superseded by the Version 2 remix . ----------------------------------------------------------- With this OpenSCAD generator you can create a custom box to store your magnets. To use it, simply set the magnet…
This is a fixed version of the Makerbot Skull which can be found at https://www.thingiverse.com/thing:308335 The original file would not work in openscad so Britt Scott fixed the stl file. Then I added a plug to remove the hole used in…
Universal ball joint. This is intended to be used as a library in other projects. Example: use ; balljoint_ball(); balljoint_seat(); balljoint_nut(); If you need a smaller or larger ball joint, use "scale". Example: use ; scale(2)…
This customizable Rolodex works with both regular Rolodex cards as well as filament swatches ! https://youtu.be/YvJMhSLk8PI https://youtu.be/Cnv59R2LXv0 How do I customize this? This is an OpenSCAD project. OpenSCAD is a script-based…
This is one of my models origionally on thingivese, checked and it still works with the newer OpenSCAD releases. hope it finds a new audience here. This is an OpenSCAD library to generate round ducting / pipe, and assosated fittings. The…
changed some minor spaces so that they fit better make some different lengths see pic .. red are original size EDIT: added new version of scad file inkl the crossing and some minor changes so that it fits even better :-) Category:…
A 3D printable DIN rail, works well in lab environments. DIN rail dimensions: top hat rail IEC/EN 60715-35 x 7.5 Should work with most DIN rail mountable circuit breakers, PLC's, relays, frequency drives,….. Printing: Print the model…
Fully parameterizsed OpenSCAD file allows you to control: Outside diameters Wall thickness Inside diameters (implied by the above two) Lengths of A, A-B, and B segments If you want to control the inside dimension for either end, set the…
This is a remix that is based on "Parametric Pulley for toothed belts in OpenSCAD" which in turn is a remix of many others. The previous remix added the insertion of a hexagon bolt head, while this version focuses on the insertion of a…
A door ramp for my robot vacuum.
Needing to add some OpenSCAD 'cubes' to a design with different edges radiused to different radii I sidetracked myself into building a reuseable module to radius any number of edges of a cube each to any radius of choice. The module…
UPDATE! - April 2025 I made a little github project page where it will generate the right python script for you and make this super simple. Improved Windows support and Mac support too.…
A Set of Orphaned OpenSCAD Scripts I wrote that generate pipe fittings of various sorts, was intended as an extension to my other pipe generation scripts . By orphaned I mean I wrote these in 2014 and don't feel I ever finished them. I've…
A parametric tape cutter. Simple to use, slips over the role of tape to aid in cutting. Pre generated are different sizes to suit most tapes, if one is missing please let me know. The cutter has a couple of different teeth options to suit…
Introducation There are other 3D models of this vintage DAF logo, but I wanted an accurate logo that I can change, for example with a personal text as a gift. Therefor I made the logo in OpenSCAD. OpenSCAD is free software:…
Fully parametric box generator in OpenSCAD (updated to v.1.4 - 24.3.2025) This is a feature library for OpenSCAD for rugged boxes that can be printed at once. It is not designed for boxes with separate bottom and top parts. There are two…
UPDATE: I suggest using Arc_Module_2.scad as it's an improved version of the original. The arc() module is a tool for creating 2D arcs in openSCAD. The biggest difference is that this module creates the arc from scratch by calculating the…
In 2022 there are still supermarkets that need a euro coin in their shopping cart. I wanted to have an abundance of tokens, so I can always find one. There are many 3D coins/tokens for shopping carts, but I could not find a strong token…
This is one of the libraries that I use in several of my projects. I don't want to upload it with each of them again and again. This OpenSCAD library provides some additional basic shapes. It also provides some standard shapes with…
