255 modeli
I first fixed this bust of David by filling some weird holes it had under the top eyelids which would create some imperfections in the print surfaces as well as create some unneccesary overhangs. I also sliced this model to print it in…
This is a remix of the original MIPRESIDENTE Iron Man Mark III helmet posted here on Thingiverse. My goal was to separate the model, orient in the best printing direction, do a little clean-up, and then publish them as ready-to-print. A…
Paint mixer - 100% printable - no support - optimized orientation Flawless mixing: High-vortex paint mixer for perfectly blended, streak-free paint in seconds. Easy to clean. Both parts are securely joined by a short 16 mm piece of…
When I got my first 3D printer last year I wanted to learn to model in Fusion 360 and print useful stuff while also learning the capabilities and limits of FFF printing. So, in this design I was intentionally playing with overhangs and…
Not my design, remix of ( https://www.thingiverse.com/thing:3388581 ) This fixes issue where figure wasn't flat on the build plane. Rotated -0.2 degrees to make it flat and cropped a bit to prevent overhang around the edges. Also:…
This is a Mobius strip with an arrow which can travel around to show you that the Mobius strip is a nonorientable surface. When the arrow comes back to the original location, it's flipped! Read more about (non)-orientable surfaces on…
Table vise - 100% printable - no support - optimized orientation Rock solid: this optimized 3D-printed vise effortlessly withstands a 1 kg load thanks to its high-strength design. Create your own using the included STEP files. Dimensions:…
This is a remix of the HSW Flush cutters holders with the pin orientation flipped. The original model had the tapered end of the pin as the end that wasn't attaching to the honeycomb storage wall making it really difficult to insert. This…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
A dancer. If you look closely, you'll se her belly dance. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round…
This wrench selects the ratcheting direction based on how you first turn it! Simply push the reset button before or after use to return it to the neutral position. Based on my previous design that featured a lever instead of a button.…
Sunlu S2 Dryer PTFE low friction filament guide - no drilling, no glue There are many PTFE filament guide adapters for the dryer but this one: Guide filament in most natural way from the roll to the PTFE tube. In fact it is in parallel…
This is another remix of Bentobox, but this version using 2x5015 fans to fit on Creality K1. The original version of Bentobox uses 2x4020 axial fan. This fan don't have much static pressure to move air through the filters. Radials fans…
Tool to orient magnets on Gridfintiy grids and bins. Make sure to orient the magnets correctly in the tool. Super glue is needed to hold the magnets in place. Original video by Zack Freedman:
First of all - the Honeycomb Wall is great! Find it here: https://www.printables.com/model/152592-honeycomb-storage-wall For my storage, I decided to go off the cuff and orient the panels in landscape mode. To my surprise, there wasn't an…
Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…
I helped someone print these and due to the curved edges and the concerns about the strength of the clips I helped them by modifying this model to print in such a way, that the clips are really strong and where the curved top profile of…
Remixed the ethernet port cover to print in an orientation that makes it far less likely to break off within the port. This orientation also increases the part surface on the build plate - reducing the need for brims. Finally, I changed…
Designed as a stand for the awesome XGIMI Elfin Portable Videoprojector whose size is 19.2 x 19.4 x 4.8 centimeters and weights less than 1kg, but the stand can surely bear heavier devices, just not sure how heavier. [edit] I added the…
This is a wrench holder that fits Hasky ratcheting swivel end wrenches as well as plain Parkside wrenches. It features: Embossed text for ease of use (the text is recessed, you can use a Posca marker and a scotch brite to make the text…
These are the dry boxes I use to store my standard width spools. These dry boxes can accomodate spools with a width up to 7 cm. Overtur, Amazon, and Prusament do not fit in these boxes. For the wider spools, have a look at my HPL Dry…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
I recommend printing this in PETG or ABS. I used 100% infill as there isn't much difference between sparse and filled for this model. Recommended print orientation is with the base vertical. I used a brim to keep the narrow arms from…
I was able to print the Steam Deck in a single piece on my MK3S using the gcode I have uploaded. The 3mf file should work if you want to change details, but I have not printed using it. Recommended settings: Supports: I would recommend…
Just reversed the base orientation of both anchors from the original model by Terrywood02
Separated the ball connector and made it printable sideways so it doesn't break when you try to fit it. you just connect both parts after printing.
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
Garden wind vane featuring 12 blade (sun ray pattern), horizontally mounted propeller with blade circumference ring and tail fin to enable self orientation to the wind. Modular design to enable easy sub part replacement and build…
Just put all the files on a single model with the best orientation to print the models I recommend printing at 100% infill, either line or rectilinear pattern, with any filament except flexible materials, but choose a tougher one like…
Version 2.0 is here! This socket wrench chooses the correct ratcheting direction on its own when you start using it! All you need to do is reset it with the switch afterwards. Gone are the days of ratcheting the wrong way! Printed with…
Floor stand for tower orientation of 2U equipment. I designed this for my APC SMT2200RM2U. Should fit 2200 and 3000 models of APC UPSes (or “schneider electric”). May fit other 2U UPSes and equipment. Be careful not to block any…
I couldn't find a simple flat, vertical divider for longboxes. I've remixed @greatoldone's horizontal bookshelf ones (source: https://www.printables.com/model/55783-comic-book-dividers-filing-tabs ) so that they can be placed…
Fully printable, easy to assemble windmill for your garden. V2 released! I added a simple mechanism to make it follow the direction of the wind, made the tolerances a bit looser and some other minor changes. You can use a 608 bearing for…
Decorative Vase, designed to be printed in Vase mode. Like it? This Model is part of a batch of vases I released. Find the other vases here
With this iPhone Stand, you’ll be able to use your MagSafe with any iPhone model—whether it’s the standard, Pro, or Pro Max—regardless of the model you have. It’s designed to provide a solid base on a desk or bedside table so you can…
This a wider F1 body so you don't to place the ESC vertical and is also multi piece for smaller printers and can be multi color. It needs some glue for the lower venturi portion. Please take your time and I recommend not bonding the…
Hello. This is my model of a hand fan stand. I took inspiration in “original” oriental display stands made of wood / bamboo. It contains features for storing the fan both opened and closed. Whole design was also adjusted with simple…
C-clamp - 100% printable - no support - optimized orientation Designed for high pressure: Optimized print orientation ensures maximum stability and superior clamping force. Choose between short and long rods for a standard setup or two…
See my newer model for a remix of this in a complete project: https://www.printables.com/model/400720-diy-monitor-pipe-clamp-mount This is a mount made for a Dell monitor but should work with any VESA 100x100 monitor. It will attach it to…
I found that even with good layer adhesion the original model was not very strong because all forces were being applied in the same direction as the layers instead of in the direction perpendicular to the layers. I remixed the original…
Simple mounting bracket for the Shelly BLU Door/Window sensor. Inb4, not tamper-, theft- or weather-resistant.
I wanted a DIN mount for my Arduino Uno that was: easy to print quick to assemble adjustable and doesn't need any extra standoffs So I developed my own in OnShape. The clips can be adjusted so that the mount can face in any four…
Wall mount for a Surface 3 Pro and Surface Pro 5 (1796) Tablets in Landscape Orientation. I raised each corner with a gap height of 9.55 millimeters to fix the model. I also added fillets to the bottom edges of each corner to increase…
I loved the model released by Brending3D, but I needed a version that held the plates vertically, as Wham Bam plates do not have the extended edge along one side like Bambu plates do, so they don't sit as nicely in the horizontal mount…
A set of coasters inspired by traditional Chinese window patterns. Width/height is approximately 8.5 cm. For hot cups, consider printing these coasters using high-temp filament such as high-temp PLA. Regular PLA or PLA+ may start to…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
With the latest craze of Dual-Color/2-Color/etc. filament (where half the filament is 1 color and half is another), an interesting challenge exists: how do you orient your part? MatterHackers (one of the makers/sellers of a brand of some…
20 Orienteering Control Punches. Layers : 0.15 PLA
Broke my z-mount by accident, so I decided to make a new one for a different position. This support is orientable and fits on 2020 and 2040 profiles. Can be used to mount different things like a Raspberry PI Camera, Smarphone, etc to your…
Turn upside down to avoid using support before creating gcode file.
Oriental Cottage – printable mini sanctuary Bring a touch of zen to your desk, diorama, or fairy garden. This pagoda-inspired cottage features sweeping tiled eaves, a round “moon” door with knocker, carved side panels. Few supports are…
Additional Lattice designs for the Oriental Lantern Dimensions: 60mm x 231mm x 1mm The lantern casing can be downloaded from the original link: Oriental Lantern by Chrise_2000 | Download free STL model | Printables.com Remixed Designs…
Inspired by the mesmerizing art and culture of the southern region of Spain (Al-Andalus). PS: The Arabic writing in some coasters are just art and has no meaning what so ever. Choose between 6 different designs of coasters + a holder…
This 3D print helps position the magnetic charger for solid contact and worry-free charging of the Sensecap T1000-E in any orientation. Most charging sleds I found rely on the built-in magnets to keep the device seated, which didn’t…
Lamp for tea lights (LED). Lamp can stand or be hung up on a cord. The light can be placed on the "altar" which then is screwed into the base of the lamp. Screwing could be better but it works. I just plugged most of the parts together…
-0,20 mm Layer, 6 walls -Support on
steerer mount for mtb, you need a screw and a nut (in the pic you see a long screw because I didn't have others, but obviously a short one is required, I'll update with pic with gps mounted in mtb), supports required, I used the new…
Dragón Oriental – Estatua de Fantasía Inspirado en la mitología oriental, este dragón representa la fuerza, la sabiduría y el poder de una de las criaturas más legendarias de la cultura asiática. Su cuerpo serpenteante, las escamas…
Dragón Oriental del Poder – Estatua de Fantasía Inspirado en la mitología oriental, este impresionante dragón representa el poder, la sabiduría y la protección. Su cuerpo serpenteante, las escamas cuidadosamente esculpidas y su expresión…
The Oriental Lamp is designed for dual functionality - it can be used as a stylish table lamp or easily mounted on the wall. The lamp is designed to be compatible with a 6cm LED puck light ( link ). Installation is easy, but it is…
Hello friends from all over the world :) This is a simple smartphone stand for cases, when you don't want to keep it in your hands while sitting at the table and would like to have a more ergonomic angle of view. For example when you're…
Six indexed coins to help orientate your multi-colour filament prints and get the colour change in the right place. Multi-colour filaments tend to maintain their orientation once a few hundred millimetres have been extruded but they…
Buse composée d'un écrou et un coude pour filetage Intex diamètre 82.
This is a remix of the Samsung Trio Wireless Charger Stand by thesneak155 . I made the adjustments below. No support is needed for the landscape attachment, but painted-on support for a small arch at the back of the stand I added a part…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Cat – Oriental is represented with long legs,…
This is the file I used to print and test my robot is 75mm square, 1.6mm walls, with an X and a Y extending from the sides. I've uploaded a few additional versions. There's another version that's a 50mm square. Then, I've uploaded a 75mm…
This is Honeycomb C, I fixed the orientation so it will fit correctly with the other shared remix. The thick side of the honeycomb wall is supposed to face outward, not inward.
Handfächer - öffnet in 15° Schritten Blatt01 und Blatt02 müssen jeweils 4 mal gedruckt werden. Beim Zusammenbau kommt zuerst die Unterseite, dann abwechselnd Blatt01 und Blatt02. Wenn ihr eine andere Anzahl drucken wollt, sagt Bescheid,…
Files exported from CAD software such as Rhino often need to be separated into components and laid out efficiently for printing. Use this file in Bambu Slicer to create your unique Unikey ID. You’ll need to orient the model, split it into…
My enclosure doesn't have legs under it and sits on a desk. Therefore I wanted to place my black PSU on the back of the IKEA LACK enclosure with the terminal side of the PSU at the bottom. I based my dimensions on the existing model by…
Voici un remix de l'hélice quadri-pales orientables pour le turboprop ( https://www.thingiverse.com/thing:3014536 ) de Konchan77 qui fonctionne. En effet, sa version avec pignons droits ne peut pas fonctionner ; il faut nécessairement…
This thread spool holder is designed to be inserted into a hexagonal panel, allowing for two installation orientations: with the flat face of the hexagon positioned horizontally or vertically. To achieve this, it features a removable…
new style Prusa usb stick case / orientation guide if loose add some electrical tape around the usb stick Printed With supports
I remixed this model for print orientation and more common fittings
Mirror to use the spool on the other side.
Credit to @pungo120_829133 for original design and @DoubleT_128870 for the 9mm/backer versions.
Variety of lengths: Rotated Insert Hook 17mm Rotated Insert Hook 25mm Rotated Insert Hook 30mm Rotated Insert Hook 35mm Rotated Insert Hook 40mm STEP files included for remix support not needed if print orientation like in the picture.…
Endstop relocation for X- and Y-Axis for Creality3D Ender 5 WARNING! If you don't do this correctly, you might damage your printer! USE AT YOUR OWN RISK! When installing, DO NOT, I repeat DO NOT USE AUTO HOME! first try: disable steppers,…
Since I don't have AirPods, I found the docking station too long, so I shortened it. The most important change is that the docking station can now also be used vertically. Additionally, there are variants with recesses for silicone feet…
Printed in Fillamentum PLA. Print orientation as show in the pictures. NO supports. NO raft. Brim if needed.
Din rail mount for BTT 5160 motor driver
Includes 2 variants - the fully print in place dragon or the split dragon Extremely flexible unique dragon body with hybrid classic flexi arms & legs Fidget, twist, flex, pose - extremely durable & fun The split dragon consists of 2…
Overview I took this model as an inspiration and created my own design with some major modifications: The paper orientation is “landscape” which means that the open side of the paper tray is on the long edge. This is because that tray is…
This sunshade is designed to help you see the screen of your iPhone 11 Pro even in strong sunlight. It also delays the heating of the iPhone in high air temperatures, which normally causes an automatic reduction of the screen brightness.…
Busto Tigre Oriental – Fuerza, Honor y Espíritu Ancestral Imponente busto de un tigre oriental inspirado en el arte tradicional asiático. Su expresión feroz, los detalles del pelaje esculpido y los elementos decorativos de inspiración…
A modern lantern design for all occasions - Halloween, Christmas or just Summer Evenings The entire assembly can print flat on the bed in one go; Dimensions: 80mm diameter x 70mm high (without handle) - for LED tealights 46mm diameter The…
I redesigend Silly's stock parts to enable a print orientation, in which layer lines are super smooth. 100% compatible.
3 STLs included, one with the vertical channel and 2 without. Vertical channel was a legacy design for filming time-lapses.
A Paravent made for Costmize in Orientel Homes
PopSocket friendly phone stand that is compatible with vertical or horizontal orientation. For use in making your phone a webcam to supervise a 3D print with Alfred Camera. Can also be used for making videos or taking timed photos. I used…
I am not sure if the ADXL345 sensor requires proper orientation to calibrate properly. The original orientation had the X axis pointing down the Y-axis. This now has the Y-Axis pointing down the Y-Axis.
Maximize your workspace organization with this compact, 3D-printable IKEA Skadis-compatible pegboard. Measuring exactly 200x200mm, it fits perfectly on most standard 3D printer beds and is ideal for tight spaces, desks, or inside…
First attempt at using FreeCAD to edit/combine parts found online, so it's not the prettiest thing ever. Sorry. This piece changes the orientation of the Jsaux Mod Case Strap Attachment from horizontal to vertical. Needed this because all…
This is the second collection of coaster designs inspired by traditional Chinese window patterns. The first set is here . Also included in this collection is a printable coaster holder.
The orienteering post consists of 7 parts and must be assembled. When assembled, it has a height of 11 cm and is 5 cm wide. If the control post is to be installed in the cockpit of a car, I recommend printing with PET or PETG. With PLA…
Print Instructions: Do not change the orientation of the stl. It prints on it's side for maximum sail strength.
