9000 modeli
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
Wydruk około 4,49 €–5,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ready for summer! Easy-to-print Frisbee Disc. The Frisbee flies very stably and well through the air. The holes in the Prusament disc make it ideal for short-distance use. The compact build makes it very travel-friendly. The size and good…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Für meinen Virtuellen Flipper (VPin) habe ich eine einfache und kompakte PC ATX Halterung gebraucht. Es sind vier Druckteile notwendig. Das linke und mittlere hat eine Aufnahme, um das Netzteil darunter festzuhalten. In dem Beispiel ist…
Wydruk około 5,59 €–6,84 € nettoWstępna wycena jednego wariantu
— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EDIT 21-Apr-2023: Added an Voron-Edition: https://www.printables.com/de/model/458704-tool-box-toolbox-for-voron-3d-printers-several-ver EDIT 20-Apr-2023: Added an Ender-Edition:…
Wydruk około 4,53 €–5,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Background I don't know if this happens to you, but maybe? You work in a profession or an industry, and everyone in your family and your circle of friends believes that you now know every detail that could be nearly related to it. "Hey!…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
I wanted to build a basic PC to use in my office so I designed this basic open air case. This "case'' can be printed on a MK3 build plate with the motherboard tray facing down and it does not need supports. You have to disable the skirt…
Wydruk około 7,08 €–8,65 € nettoWstępna wycena jednego wariantu
Cupcake From Five Nights At Freddy's
Wydruk około 22,04 €–26,94 € nettoWstępna wycena jednego wariantu
Use any floss at least 6" (150 mm) in length. Floss on the Go! Rip, Wrap, Snap, Floss! How to Wrap: Can be Re-used! 1pc Prints in 7 min. 6pc Print in 1 hr.
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
This enables you to use the Prusa Dryboxes (not Wall-Mounted version) with a PTFE-Tubing clamp. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox using the same screws (M3…
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
As mentioned in the title, it's a Laptop Riser! The hexagonal grid of the prusament spools makes very easy to attach some bolts and nuts to it. I was in need of a laptop riser that could release the neck pain of always looking down while…
Wydruk około 5,86 €–7,16 € nettoWstępna wycena jednego wariantu
Colour swatch chips to match into The Print Codex system. Make it your own by printing reference chips of additional filament you've purchased. Features Easily determine material and brand of your past prints. Each chip has the brand and…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
This is what I call a Storing Maching, it's a robotic spool tower, which has a mecanism in it that open and closes the drawers via the rotation of a nema 17 Explanation Video : Download Files: Assembly Guide PDF…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
I needed to cool down my 2x10Gbe Ethernet card, NVMe drives and SAS card.
Wydruk około 3,46 €–4,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PC4-M10 adapter for the MMU3. Remix of vertigo235's great adapter for the MMU2. Prints perfectly fine without supports @ 0.2mm layer height.
Wydruk około 1,34 €–1,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Looking for the perfect receptacle to enjoy your popcorn from at your Barbie/Oppenheimer double feature? Look no further than the Barbenheimer Popcorn Bucket, fashioned from the Fat man nuke pen cup by Domes . What better way to celebrate…
Wydruk około 26,87 €–32,84 € nettoWstępna wycena jednego wariantu
I wanted to use some other PCIe Cards with my ZimaBoard Single Board Computer, but in order to use any card, you need to remove the mounting bracket. As there isn't a standard for where the screw holes will be on a PCIe card for the…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Parametric PCB Case made with Fusion 360 Print instructions Open the f3d file in Fusion 360 Change all the parameters that fits your needs Convert parts to mesh bodies and output them to stl files or to your slicer Slice and Print
Wydruk około 7,09 €–8,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nightmare Cupcake from Five Nights at Freddys.
Wydruk około 21,61 €–26,41 € nettoWstępna wycena jednego wariantu
I vectorized and transformed an original artwork by Will Pjigg into a design suitable for 3D printing, specifically to embellish my PC case. My computer is placed on an office cabinet next to me, and I thought its large black surface…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
This Mini Cupcake Buddy is the sweetest little friend in the collection! 🧁✨ Perfect for adding a sprinkle of cuteness to your desk, shelf, or workspace. ✅ Adorably Frosted & Tiny – A miniature cupcake pal for any occasion ✅ Great for Desk…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
A screwable Battery Case for 3 GoPro HERO 5, 6 or 7 Batteries
Wydruk około 5,50 €–6,72 € nettoWstępna wycena jednego wariantu
Hey makers, I still had exactly 5 PC4-M10 PTFE adapters and i wanted a long clip to integrate them into Michal Fanta's wonderful spool holder system. So I built in an M10 thread and minimized the holes from 4 to 3 mm so that the PTFE does…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you, like me, design and manufacture your own PCBs, you know storing all those PCB's is messy. You can keep them in the box they came in, you can keep them in the bublewrap… but every time you need to fetch one you inevitably need to…
Wydruk około 15,39 €–18,81 € nettoWstępna wycena jednego wariantu
Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use. Designed to use…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This improved file has an integrated thread for a standard PC4-M10 PTFE tube push connector. This allows for you to print your own threaded part for the best push connector option rather than having to break out the soldering iron for a…
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
Just another cover for a typical light switch. Print "face down" with no supports. The .gcode file includes a "filament change" pause so you can print two-color if you like. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
Festool Upcycling hand sanding block – Give your sanding pad a second life! What are you currently doing with old sanding pads? Turn them into something unique – print your own Festool hand sanding block and give them a second life. Don't…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just 2 versions of clips on which we can screw PC4 (Push to Connect) M6 PTFE fitting. I don't have CAD software to edit STEP files then i updated the original STLs using Blender. The threads were generated with OpenScad before integration…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple passthrough the drybox. You will need to drill a 10mm hole in the wall of the box. Screw the PC4 couplings onto the outer part. I probably don't need to explain anymore :) Material: PETG or PLA (but PETG is better) Layer: 0.2mm…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please note this design should be considered a BETA , I'm still making some tweaks for the following: Improve all hangers to make latching less stiff Improvements to PCIe hanger. Modular 3U Rackmount for ZimaBoards , to be co-located with…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello everyone! My apologies to those metric people around the globe, but this project is in imperial units. I am not opposed to metric at all, but all the material I used in this project are those items I already had on hand. Some time…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is designed to print quickly. I love design which use minimal time and material. Size is for 4, 6, 8, 10, 12 pcs batteries. Depleted batteries could be stored upside down to identify them from those already charged and ready…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Non-flat, miniature sized tokens that can be used as a player/monster/npc tokens for tabletop RPGs. Tokens are numbered 0-7 (sorry for programmers counting, zero was easier to design than one). I've used filament swapping at layer height…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
Its Popcorn. Be safe. Make it big.
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For local soap production in the Gambia, for molding up to 12 soaps with same size and shape simultaneously. it is a fast and economic way of soap production in the Gambia. Print Instructions: PETG, 0.2mm layer height, partitions 100%…
Wydruk około 1,14 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a nice simple PCB Vice that does take up a lot of space. It does not need a huge print bed so should fit on most printers. I have included a tall version but in all honesty thing this would be overkill, it would allow you to get a…
Wydruk około 8,86 €–10,83 € nettoWstępna wycena jednego wariantu
Print took around 33hrs with %15 infill, .16 layer height. Has moveable wheels and SAM surface-to-air-missile.
Wydruk około 22,85 €–27,93 € nettoWstępna wycena jednego wariantu
Very small puzzles that will give you a hard time. It's nothing easy. Hint: The solution is engraved in on the backside. Print instructions I recommend printing puzzles in four different colors. It looks amazing. Enjoy!
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
I measured this from some connectors I had in use, print solid for strongest results. I have used some cheap PLA to produce these and I've tested the pressure up to 8.5Bar, but YMMV and I take no responsibility for injury caused by using…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
PCB Mounting Bracket for PCBs with a thickness up to 2 mm. Tested with 1.6 mm and works perfect. Hole diameter is 4.5 mm with a 90° countersink.
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
Festool Upcycling saw blade clock – Give your saw blade a second life! What are you currently doing with old saw blades? Turn them into something unique – print your own Festool saw blade clock and give them a second life. Don't have saw…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Most nozzle boxes are for a high number of nozzles. I don't own that many nozzles (yet), but I liked the design of Julia Ebert's nozzle box. Thanks to the uploaded STEP files, I was able to change the box to fit 6 pieces of E3D V6…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
A low-profile laminar fan duct for PC cooling. Now, I'm still trying to learn OpenFOAM, so there's still tuning to do on the blade angle and shape to improve things, but this works. I just think I can make it better. In the meantime, have…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed a case for one of my Games that didn't originally come with a case. So I started looking into 3D print options. I found the one that is linked here. I liked it the best for what I was looking for and overall design. I wanted a…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Cover for your camera's Prontor/Compur sync socket. Print with a .25mm nozzle. Fits well on several tested cameras, but might need slight scaling for your particular camera/printer combination. Photos are of a Mamiya RB67 lens.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Just print the file at 0.2 layer height (no supports needed), Add a rubber band and its ready!
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
Print on the thin edge face with snug supports to prevent the pegs shearing off. See the attached gcode for reference. Trim the T shaped peg if it is tight. Any elephant foot will make it very tight on that one side, so examine the bed…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
Printable PCB (PCBPrint) for testing a single Cherry-mx switch. Also, a simple keycap is included (Designed with FreeCAD) Print instructions You can find more information in the github wiki:…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Für die Fertigstellung der Uhr wird neben den gedruckten Teilen noch folgendes benötigt: 1 Seitenteil einer Prusament-Spule Quarzuhr Uhrwerk mit einer 28mm langen Welle:…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my version of the Repconn A3 Rocket which is shown in Fallout New Vegas as they leave for the Great Journey. Modeled in Fusion 360. Minimal supports, but use a brim since the fins need to be stable for a successful print. Print: 1…
Wydruk około 7,97 €–9,74 € nettoWstępna wycena jednego wariantu
Modern high-density printed circuit boards (PCBs) are difficult to debug using regular oscilloscope probes. Keeping good contact with a trace, chip leg, or test-point is barely possible. If you need to measure more than 1 or 2 signals…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use a PC disk drive externally with this cover
Wydruk około 1,99 €–2,44 € nettoWstępna wycena jednego wariantu
I had a cheap (7.49) set of Harbor freight Titanium Hex Shank Drill Bit Set, 13 Pc. lying in the bottom of my tool box and decided the only way I was ever going to use them is if they where organized and in a case. So I got out the…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena jednego wariantu
I wanted to mount my Zimaboard and an extra 2.5Gbps NIC as I plan to use this as a pfSense router. I've provided 2 versions, one which uses brass inserts to secure the NIC onto, the other which provides smaller holes for M3 bolts to self…
Wydruk około 2,05 €–2,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d…
Wydruk około 26,82 €–32,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About this design: I think this box has many cool features, but I want to highlight just one. You can easily modify it to suit your liking. I have wanted to step up my modeling game and design something where I could quickly modify one…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
This version of clip allows you to screw in a PC4 (Push to Connect) M10 PTFE fitting.
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Wydruk około 1,88 €–2,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Empty Spool and just a little bit of Filament left?! So keep reading ;D What do we need? Empty Spools Some leftover Filament for the railing 3D Printed Parts (MMU2´s or Singleextruder) Some leftover screws (M3x17) and a screwdriver (that…
Wydruk około 1,75 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Redirect the airflow from your PC's rear exhaust fans upwards and away from the wall. The purpose is to expel hot air in a direction that prevents it from circulating back into the case through the lower slots. Originally designed for the…
Wydruk około 6,10 €–7,46 € nettoWstępna wycena jednego wariantu
Death Valley APC Container Carrier For your up armoured death-dealing troops, deliver these contains that can brook no delays. The mutants, aliens, heretics, and worse are on the march. All converging on your beloved district inside the…
Wydruk około 2,29 €–2,79 € nettoWstępna wycena jednego wariantu
This computer case was designed for my Beelink SER5-Pro 5800H Mini PC but it may fit other Beelink computers and possibly other brands. Here are the steps to figure out if your PC will fit into this case: The hole is 131mm wide, 118 mm…
Wydruk około 4,05 €–4,94 € nettoWstępna wycena jednego wariantu
After I added the 3D Chameleon to my K1 Max the PTFE tubes kept falling out of the stock tube clips. I designed this addon to simply snap on a PC4-M10 coupler. Now the tubes stay put. This adapter can be used on the extruder and/or the…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Designed to fit in Artic P14 or any 14 cm PC fans to directional air flow.
Wydruk około 2,28 €–2,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
LAV APC : Little Green Army Men
Wydruk około 14,61 €–17,86 € nettoWstępna wycena jednego wariantu
These are motivational message ear savers for use with surgical masks. I have optimized print settings for 0.6mm nozzle on Prusa I3 MK3S printers. I am using amazon basics PETG. Print instructions The settings are in the file. These print…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a flexible mounting system for pcbs/panels onto the LumenPnP pick&place machine. It's composed of a base mounting plate with fixed brackets for one pcb corner plus movable support sliders for the remaining pcb edges. A grid…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
A quick print to rigidly mount a bowden or reverse bowden tube to 2020 series extrusions. I recommend using a socket to thread the coupler into the mount. PARTS LIST 1x M3x8mm SHCS 1x M3 Hammerhead or Roll-in 2020 tnut 1x PC4-M10 Bowden…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
With some additional parts you can make a perfect cable spool of a empty Prusament spool. It is made with bearings and rock solid. For example capable of holding 30m patch cable or what ever you like! Print instructions <!DOCTYPE HTML…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bei diesem Modell handelt es sich um einen in unter einer Stunde druckbaren Schraubstock für kleine PCBs. Das Modell wird wie folgt zusammengesetzt: Das Modell habe ich für meinen Drucker designed. Er ist, vorsichtig ausgedrückt, nicht…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Which collets will fit? 401E (OZ8), DIN 6388A Found in spindles/routers from Kress, AMB, Isel, Mafell, Stepcraft Each position will accept collets with or without nut attached (tested with Kress/AMB nuts) A short type 17mm-spanner will…
Wydruk około 10,13 €–12,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
YOU MUST SWAP SOME WIRES FOR THIS TO WORK!!!! THIS FILE USES A CUSTOM FONT: HELVETICA NEUE (similar to prusa font) Install it before opening FILE!! THE MODEL WILL WORK IF YOU CHOOSE TO KEEP THE SPRINGS IN THE SENSORS AND NOT ADD MAGNETS I…
Wydruk około 4,44 €–5,43 € nettoWstępna wycena jednego wariantu
I needed this to fertilize tiny seedlings without flushing them away. This should fit most EU bottles. All the other shower type caps I tried were leaking around the thread, or did not fit at all. If the holes don't print clean enough,…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drag chain side mount. Suitable for 30 x 15 mm aluminium strip. I use M4x20 Screws.
Wydruk około 2,10 €–2,56 € nettoWstępna wycena jednego wariantu
The purpose is to make connecting drybox as easy as possible. 0.2 and 0.3 layer heights were also OK. Drybox i'm trying to connect: https://www.printables.com/pl/model/98008-drybox-for-4-spools-ikea-samla-22l-based Other similar part:…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is a fan cover for a 120 mm fan with holes of a diameter on 3 mm
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a spinning top using the side of an old spool to ensure a good stability. The spinning top is locked inside the laucher until the toothed rack is completly removed. This ensures that the full length of the rack is used and maximum…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Purpose This very flat clamp can be used for inspecting, measuring and soldering under a microscope. For example miniature PCBs like ESP32 modules. or other small microcontroller boards. Features PCB edge slots of 1.6 and 0.8 mm, flat,…
Wydruk około 6,05 €–7,39 € nettoWstępna wycena jednego wariantu
Hi For you who uses the amazing handsfree measurement system PCBite made by Sensepeek, I have made a protection cover for the SP-series of probes. SP10, SP100 and SP200 fits in the cover The covers can also be stacked by using the sleeve…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
RFID scanner/writer for PC/Mac - based on Raspberry Pi zero and RC522 RFID. A quality USB RFID code reader/writer costs over $220. This system costs less than $20. You will need: Raspberry Pi Zero (W) RFID-RC522 expansion module Pi Zero…
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Death Valley APC - Open Bed For your up armoured death-dealing troops that can brook no delays. The mutants, aliens, heretics, and worse are on the march. All converging on your beloved district inside the vast megalopolis city-state.…
Wydruk około 7,18 €–8,77 € nettoWstępna wycena jednego wariantu
The model is print-in-place, no supports needed. Works best with headsets having a headband-depth of ~30-35mm. When the thumbscrew is in place, you can tighten the hook by turning it. Be careful not to screw it too tight. I used black PLA…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu
Simple model buil with thinkercad. I tested with PLA and with a Creality Enver V3 se. I made 3 models for my 3 Mini PCs dreamquest at home. Any question, send me a email with the subject: “Mini-PC Dreamquest Fan” to [email protected]
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
The .3mf file contains a set of 4 corner clamps ( 2 mirrored pairs ) to clamp the corners of a PCB and 2 mirrored straight clamps to clamp the sides of a PCB. The .stl files only contain the corner and straight clamp in 1 direction, to…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The designs are based off work that Álvaro Giménez did, see his website below for reference: https://gomezgimenez.com/electronica/2022/03/15/diy-pcb-cnc-laser.html I wanted to create the CAD models for these to first check that it would…
Wydruk około 4,31 €–5,27 € nettoWstępna wycena jednego wariantu
Re-design on XY top frame to match the X-Carriage for the Hypercube Evolution, but to re-use the existing 8mm rods, aluminum frame, 8mm linear bearings and not sacrifice any build volume. Also wanted to keep the belts parallel or…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple tool used to compress the plastic standoffs that hold Bally/Stern boards. I find it easier to use than needle nose pliers. Just press the tool over the standoff to disengage it from the board and gently pull the board off with the…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Original tube that come with eSUN eBOX is made from some sticky material (not PTFE) and filament get stuck in it from time to time making printing from the dryer almost impossible. So I made my own version using standard parts. I use…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model vytvořený v rámci hodiny IaKT v programu TinkerCAD. Materiál PLA, podpěry organické na tiskové podložce, výplň 15%, s límcem.
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
This is a bundle of 2 PCIE case slot covers as replacements for lost ones. 1 normal form factor, and one small form factor. I hate losing them and seeing this gap in my awesome PC. Thanks for taking a look, and happy printing :) 0.2MM…
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
I build a fan controller using a Seeeduino Xiao microcontroller soldered to an ElectroCookie Mini PCB Prototype Board . I wanted a small case for this and similar projects such as those using an ESP32 D1 Mini or ESP8266 D1 Mini. There is…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
You are working with your electronics, you have successfully tested your system on the breadboard and now comes the time to attach some PCBs together for real world testing. How to do it quick and without designing a new attachment for…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired and remixed by the Thingiverse design: https://www.thingiverse.com/thing:2427726 The same user had one a lot smaller but I needed something in the middle. Has 8 slots for the holder, available in the link. This is attached with…
Wydruk około 4,06 €–4,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This filament guide is a remix to add a threaded end for a bowden connector
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
PCB distances for 3mm holes in 5, 10, 15 and 20 mm distance. The foot is 19x19mm for attaching double sided tape. Guess you should try to print them in nylon for strength but nobody's got time for that.
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Two variants of "mounts" for 5x7cm paper-epoxy prototype PCBs (If you use them, you know what I mean.). One version uses M3 hardware to fix the board. The other uses glue, if anything at all.
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
![Extended PTFE (PC4-M10) Quick-Fitting Mod for Prusa Drybox [V3]](https://media.printables.com/media/prints/31696/images/745620_40034652-a998-4c43-983c-424bf857ea6d/img_4234.jpg)
