32 modeli
Here is a 30x30mm calibration cube designed to test a Positron v3.2 kit printer. Edit 10/30: Added a PosiXY_cube.3mf Orcaslicer project. Opening the project will load tuned baseline settings for printing on the Positron. A well tuned and…
GitHub issues GitHub forks GitHub stars A Note on the LDO Guide; We are working on improving the organization of our github to better prevent broken URLs. We don't have direct edit access to the guide, so we work closely with LDO to…
Conversion kit for EasyThreed K10 to print upside-down like the famous “Positron” portable 3D printer. By adding only two 3d-printed parts, it prints essentially the same “way” Positron does! Oh, and it fits into a filament box, too ;-)…
The screen never seemed to have a good place to go and increased the machine's footprint. Designed this bracket mount on top of the Z-Axis V Holder. No modifications needed, slides in without tools or any additional parts. For travel…
Slice and print however you want. No wrong answers.
Alternative option for a spool holder for the Positron. Allows a spool of filament to be mounted on the top of the printer. Allows the printer to still be folded down in the same space with the removal of the upper part of the…
I recommend using the jfine's Trigger Discipline hands for holding the grip, since I didn't really account for regular “Holding” hands gripping it, my fault guys. And I assume the regular “open” hands by Soozafone work well for holding…
Prints best magnet-hole down but I printed mine logo down to get the nice shiny glass-plate surface where it'd be seen. Hole is sized for a 3x6mm magnet.
This is a Mini Positron as featured at Rocky Mountain Rep Rap Festival 2024! Want to have your own Positron? Tired of waiting for us to finally release a kit? Print your own Positron! This print is designed to be somewhat difficult to…
This is my custom parts for the Positron V3.2 internal power supply mod The back side left panel is designed to fit a C6 power socket. The top spacer gives the clearance for the power supply. (Meanwell LOP-300-24) The Top middle spacer…
This is the case for positron tools! The lid seconds as a parts tray and gives you a tight seal so your bolts don't run away from you inside the container. When you buy the kit, all of these components are included with the positron, and…
I remixed the Sherpa Micro extruder to work on a Positron 3D printer. Extruder is setup for a Bowden tube out and reverse Bowden in, has a mount point for Z endstop, and the tension screw is reversed to make the design more compact.…
This spool holder attaches to the top of the makerbeam on the Positron LT z axis. it consists of 3 printed parts: The spool arm, the spool brace and the brace lock. in addition to the printed parts you will need : 3x m3*10 countersunk…
Combined Positron-style conversion kit for EasyThreed K10 by @hoge_coc and EasyThreed K10 Alternative Bed @Eladisimo_355
I designed this for the Positron Printed Parts Kits as a method of routing cables after you have assembled your Positron. Several people have told me how they love using this hook for other uses where a tiny hook can help then grab tiny…
This is an update to my previous holder to add something i tought of afterwards, a full spool holder The only thing that is needed is a longer piece of PTFE for the full spool addon It still has the hook part if you want to use it with…
Important: These covers were created for the original Positron V3 (Legacy). I don't know of these are compatible with the current LDO Positron v3.2 at all. Feel free to remix. Stylish Hexagon Top covers for the Positron V3 Printer (…
simple form to shape the washers for the positron LT, print 100% infill with multiple on the bed (for cooling) place one washer at a time over the base, place the ring shaped part over it and hit 3-4 times with a hammer, when removed the…
other modifications……. https://note.com/newspeak/n/na6e293d8471e
This is a keychain of the Positron 3D logo. Positron 3D printer: https://positron3d.com/.
The newer extruder V2 for the Positron only uses the stock press fit ECAS fitting. This mod lets you use either M6 or M10 PTFE couplers instead.
This is to add some additional support to the bed. Designed for v3.2 batch 2 with a glass bed. The clip is designed to fit around the connector. It works by applying upward force from the bed while also applying some down force against…
I removed the need for two screws. I had issues with the holder portion not sitting flat on the top of the Z pillar. The all in one piece design fixed that issue. https://discord.com/channels/994721150804443266/1269879034918080522
This contains every tool and consumable (except for filament, of course) that is required to run or service a Positron V3 3D Printer. Because it is an upside-down printer, when extruding filament (during filament load or filament swaps)…
There is space for the printer, anker prime power bank, full 1 kilo spool, screen, a bunch of power cables, and one build plate. I included the step file for the whole model as well as the dxf for the laser cut foam for the bottom.…
This is now replaced with the 2.0 version, which can be found here: I saw a hook holder made Smiksky on the Positron's discord and wanted to try it out. Smiksky's design uses a bearing to allow the fillament to roll. I did not have a…
These parts move the placement of the power button and DC barrel jack on the positron 3d printer. The power swithcing pcb is replaced with this drop-in unit I will be selling. After printing the parts you'll see the power button is placed…
This design is a simple add-on for the Positron V3 and its extruder. The original extruder tends to overheat, with the motor getting quite hot during operation. To solve this, I replaced it with the Bondtech LGX Lite extruder, which fits…
I remade a design I made years ago using Creo CAD. I use Onshape now. It was easier to start over (the right way this time) than to fix the old file in the old app. Print the Top and Bottom files, then glue the ½ coins together for better…
other modifications……. https://note.com/newspeak/n/na6e293d8471e
GitHub issues GitHub forks GitHub stars A Note on the LDO Guide; We are working on improving the organization of our github to better prevent broken URLs. We don't have direct edit access to the guide, so we work closely with LDO to…
Alternative option for a spool holder for the Positron. Allows a spool of filament to be mounted on the top of the printer. Allows the printer to still be folded down in the same space with the removal of the upper part of the…
