130 modeli
THE ORIGINAL FILAMENT GUIDE IS REQUIRED TO HOLD THIS IN PLACE!! A quick model I put together since I was starting to get annoyed with the extra tubes coming out of my S4 just lying around and getting tangled together. There's a version…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Basic / Minimalist PS1 PS2 Controller stand I designed. Couldnt find one that i could print and liked using my Ender 2 Pro ( small Bed ) just print all 3 PCS, no supports needed at all ( just orient them right ) and snap together. i had…
Designed this piece after seeing the PS5 30th anniversary announcements. Fits on the USB A end of the cable included with Dualsense controllers. Printed up right for the best quality on the Sony logo. 0.2 Layer height, 0.4 layer width,…
Text is printed separated and inserted in, made for a cleaner product. Recommended printing in a PLA Silk for the best results. Text is printed upside down (only if you have a smooth print surface). Print files are customized temperature…
I printed these in 0.3mm height all in one go - which took around 4 hours to complete a full set. Result snaps together perfectly, and holds the MC's in place for easy storage. Enjoy! Update 3/4/2021 I have Added Extension pieces you can…
Wall mountable Playstation (PSX PS1) controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) There is a model for both the joystick…
My first upload! I've been learning a lot and wanted to try making a thing. None of the Playstation One game holders I found seemed to work well for jewel cases so I used the one from 3DJK (and most other game holders) for inspiration.…
Print laying flat using supports for best strength along the tool, see example slicer picture. Printed in PETG, 4+ Walls.
Different tools for the Proxxon PS13, best printed in resin, not sure about FDM. I use 3M 2-5-468MP doublesided tape to stick regular dry and wet sandpaper on the tools. For the round one I use round die punches and for the triangle I use…
Wall mountable PS1 Classic Edition controller holder. This is designed for Picture Hanging Command Strips (ex: https://www.amazon.com/Command-Picture-Hanging-Christmas-Decorations/dp/B0B4F5PXW1 ) Check out all my other video game…
Blueretro case for minified ESP32. Will work with PS1, PS2, PS3 (via adapter), XBOX 360 (via adapter). Recommended material: PETG/ABS/ASA. Will work with PLA but could deform since ESP32 gets kinda hot. What is blueretro? BlueRetro is a…
Remix of littlebalup's xStation cover for SCPH-5XXX PlayStations. Extender free design! Shoutout to littlebalup for the original design
About this model This is a PS1 game box for PAL games. Important feature : all 3 parts are compatible with original PS1 boxes, which is useful for printing replacements. Note: ps1_pal_box_lid and ps1_pal_box_cdrom require supports , they…
You will need the following items for this print: ESP32 30pin USB-C Dev board, these are common on places like aliexpress https://www.aliexpress.com/item/1005006336964908.html Ps2 Controller Male Connector, you will need to bend the legs…
This model is the smallest I could make it, and has been designed around Micha213's PCB (https://github.com/Micha213/BlueRetro-PS1-2-Receiver). What to order: 1 x PS2 plug from AliExpress 4 x 6mm M2 screws 4 x 2mm M2 heat set insert (3mm…
I save old PlayStation consoles from landfill by replacing the broken optical drives with xStation units and a cover is the final touch. Inspired by another xStation hood that is only available to purchase, I wanted an aesthetically…
Simple stand to hold the 8 sanding arbors of Proxxon PS13 pensander
Black Tools are original, transparent are printed with resin by me (you'll find the tools in my profile) Printed and tested in ABS (Nobufil ABSx Galaxy Blue), so your mileage may vary. I added a test piece with a single holder for you to…
Summary Since every other USB-C mod didnt fit my needs, I decided to create one on my own. This prototype is currently in green - will try to print it in resin in black or grey. PARTS USED: RePSX variant (white pcb in my case): PDC004-PD…
31K-PS1 pistol based on the namco guncon. Not quite perfect but close enough. The buttons on the sides don't do anything. Don't point it at your TV. Buy 31K-M hardware with 6 bearings. Printed magazines are in the files or compatible with…
Printed 100% in PETG
Modelo 3D listo para impresión 3D Este diseño altamente detallado de está optimizado para impresoras 3D FDM, SLA y más. Ideal para coleccionistas, entusiastas del modelado, y creadores que buscan piezas únicas. 🔹 Características clave: *…
I am thrilled to present the "PS1 Memory Card Hard Case," a 3D printable STL model that I have created to protect your precious PlayStation 1 memory cards. This model is available completely free of charge, allowing you to conveniently…
Hello, Today I have a Playstation PS1, PS2 controller holder for you The controller fits beautifully into the stand. They will beautify any video game collection. It is for a special type of controller for PS1, PS2 Classic controllers…
These brackets were designed to mount a Classic Playstation to the wall and use it.
The data set includes: One CD-Clip for Playstation one games Different Templates for the mounting plate are also included. One design for 3x7 CD's and 2 times 3x3 CD's are included. Both templates are designed for a panel size of 1200 x…
I save old PlayStation consoles from landfill by replacing the broken optical drives with xStation units and a cover is the final touch. Inspired by another xStation hood that is only available to purchase, I wanted an aesthetically…
Simple in-slicer-created remix which fits ps3 gamepad with charging cable Fits ps1 and ps2 gamepads (last photo)
The model has not been tested and may need further adjustments for the face plate.
PS1 style USB cover based on Jeff Chen's original design, modified to fit Goodmans USB-C 2M cable in grey.
Lithophane / Vitrail dédié à la jaquette de Crash Bandicoot sur Playstation ! Faites vous plaisir ! This is a lithophane from the cover of Crash Bandicoot on Playstation, that could be used as a stained glass window. Enjoy ! Print…
I printed it in ABS for better durability, with supports
Print flat, or vertically if the spring doesn't work well flat. First STL is for OEM PSIO, second is for aliexpress clones.
This is a 10" rack mount for Reolink's 8-port PoE switch (RLA-PS1). I couldn't find one at the time, so with inspiration from some rack mounts for TP-Link switches I've used in the past, I reworked an existing model to fit this switch. Be…
3D printed spacer to be used with the Robot_Retro PS1 power supply. robot_retro store Designed by Joseph Tomkins
This jig includes a base and slide on cover to hold standard male/male jumper wires in place to make it easier to connect a playstation memory card to your arduino (or other microcontroller) with Memcarduino and MemcardRex to transfer…
RetroPie Emustation box for Raspberry Pi Zero Made with 6 M2x4-5 screws, you have to glue connectors to top piece, designed to remove the cover of the camera pin port, otherwise, it won't fit... You can add/glue a green LED and…
This is a display stand for any media in Switch game cases, DS and 3DS game cases, DVD cases (PS2, GameCube, Xbox, Xbox 360, movies, etc.), CD jewel cases (single CD PS1, Dreamcast, Turbografx 16/PC Engine, etc.), Bluray cases (PS3, Xbox…
From Thingiverse: Hi, holder to install an HP server PSU DPS1200 fb into an ATX PSU form factor. Enjoy ! Print Settings Printer brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament brand: amazon Filament…
I wanted a holder that can be attached to the windshield with the GPS facing out with minimal obstruction. It's compatible with the go pro mount and you can put it in different orientations. Add some felt on the 3 “legs” to reduce the…
To use with the PS1PSU board from aliexpress and an USB-C PD connector (aliexpress). Prints with supports. I used matte grey PLA. USB-C PD : https://fr.aliexpress.com/item/1005006191468955.html PS1PSU :…
I improved the model created by Mattia. The disc now actually stays in the case and don't come loose. Also Added support for games with 2-disc like Gran Turismo 2 and Metal Gear Solid. My tips for printing the case: -Use a 0.6mm nozzle…
RUPS1 (Robot for Upcycling Prusament Spools) je programovatelný robot pro základy elektroniky a programování. Print instructions Robot je tisknutelný na tiskárně Prusa i3 MK3S z materiálu PETG. Návod na sestavení můžete stáhnout zde:…
Simple holder for your PS1 game discs.
Lithophane / Vitrail dédié à la jaquette de Tomb Raider 2 sur PS1 Playstation! Faites vous plaisir ! This is a lithophane from the cover of Tomb Raider 2 on PS1 Playstation, that could be used as a stained glass window. Enjoy ! Print…
This is a arial bomb lamp sized to print in two pieces and sized to use the max height of the bambu X1C, X1, and PS1.
fairly basic memory card holder developed in tinkercad, prints well, needs to have the logos glued in. can have the Ps1 logo print in multicolor (see attached picture). please comment with questions or concerns.
Simple hanger for retro console gamepads. Front part holds the gamepad, back part the cable Works with most gamepads. Tested with PS1 (with and without analogue sticks), Sega Saturn, Megadrive/Genesis & Master System, Nintendo NES & SNES,…
PS1 Styled piece to fit on the end of the USB C - C cables included with PS5 slim Is tight enough to clamp with the cable but if you move your cables a lot I suggest using some adhesive between the parts.
Having problems with the lid switch not engaging on your PS1? This may help. Print it out and add to the lid switch for some extra length to help engage the switch. This is meant to be a friction fit. If it does not fit yours just scale…
Mahr PS10 roughness gauge adapter for dial gauge stand. Print form PETG 0.2 layer height The model has included the support material, you need to cut it a good, thin knife. Needed extra parts: -M5 hexhead scew (min. 6-8mm long) -8mm…
To make this adapter you'll need: x4 M3 nuts x4 M3x14mm screws x1 Controller cable for PS1/PS2 (I used one from a generic controller) x1 Esp32 of the following form factor (see picture below) I recommend testing it after flashing it…
PS1 - Picostation SD-Card Adapter für den Laserausschnitt
It is now recommended to print the following two models: usb-to-ps1-mouse-pro_top_ALL_PCB_REVISIONS.stl usb-to-ps1-mouse-pro_bottom_ALL_PCB_REVISIONS.stl The usb-to-ps1-mouse-pro_bottom_PCB_1_ONLY.stl only works with the PCB_1 revision of…
Filaments used: Esun yellow Elagoo black Elagoo matte green Elagoo matte red Elagoo matte blue Printed with .2mm layer height and starting layer of .16
I needed this to get the power button to work on a 3rd party PS1 shell. Worked out great,
Printed on PETG, 0.4mm nozzle, 0.2mm layer height, nothing fancy Used stripped 22awg wire for the pins, enameled wire for connecting to the board RP 2040 Zero should snap fit in the slot SCAD file attached too, I don't know what I am…
If you don't have or just don't want to use a Dremel, this jig is perfect to make a clean and precise cut. Add some flat sanding and you will be good to go in minutes!
I wanted a way to give a bit more stability for my PS1 games since I show them off from the front without any support. Saw the original model by waffelo here but found out it was only for single sized jewel cases. Inspired by their design…
For all the nostalgic people (like me), I created a copy of the GranTurismo Playstation 1 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will not…
How to print: Print with the USBC plug pointing up. |This will allow more precision and require no supports.
This is a small mount for the USB C PD trigger board that appears in the reference photo, it must be configured to output 12v DC in order to work with a PS1PSU (like the one I'm using) or equivalents that are designed to work with that…
This is a wall mount for the big box PS1 Doom.
This is a very quick remix !! Topology isnt ideal, please DM me if theres any problem
Bracket for installing a 6015 fan on ramps It must be screwed
Wall mount Battery holder for 12V Black and Decker Firestorm drill. Uses a standard Deck screw for wall mounting. I reverse engineered the model from a PS130 replacement battery (that fits in and powers my drill) and from the original…
For all the nostalgic people (like me), I created a copy of the Crash Bandicoot Playstation 1 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
A replacement leg for the mCover case for a Dell XPS 13 9370. https://www.amazon.de/gp/product/B079TZWQKK/
Sinden lightgun users know how difficult it is to get everything together to setup for PS1 and PS2. Dunne.karl has taken upon himself to simplify the process. With creating the Arduino PCB for hookup, I decided to create the custom shell…
READ BEFORE PRINT!:) If you want the textured side pointing outwards from the wall right click the model and Mirror it! I have a 0.2mm nozzle (PETG) so I didn't mirror it, made it on draft looks great! Let your print cool down when its…
A side panel adapted to fit the 3d printer gmaker-fps1 mini heater. You can simply slot the heater into place and run the cable through the panel hole to the heater. Optionally add double sided Velcro to the back of the heater and into…
For all the nostalgic people (like me), I created a copy of the Colin McRae Rally Playstation 1 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print…
For all the nostalgic people (like me), I created a copy of the GranTurismo 2 Playstation 1 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
The purpose of this template is to provide approximate dimensions for making add ons, boxes, cases and the like.
This is a replacement clip to close the lid of the PlayStation 1. It often happens that the original clip can break over time, this model I created replaces it, restoring the correct closure of the lid.
Requires 4 - m2.2x7mm Wellocks screws (not machine screws. These screws are similar to the PC fan mount screws but in m2.2 size. Wellocks are available on Amazon and Ali.) Link to project: Sinden PS1 Adapter v2 Rev 1.1 - OSHWLab
A game display for games in double jewel cases (PS1), long jewel boxes (Sega Saturn), long boxes (PS1, 3DO) and boxes (Game Boy, GBA, NES, Atari, Intellivision, Genesis - NOT clamshell cases). This does not hold SNES or Nintendo 64 boxes.…
This is a stand for PS197, Flyco's electric shaver model.
Rotor bushing for Henri Fountain PS1 Pump. Printed in ASA. Pump was making annoying humming noise. Discovered there was a significant gap between the rotor and OEM bushing as well as to much clearance between the housing and Rotor. This…
And don't forget : “Don't put a GPS on a KD please. But still it's there for some reason.” :-)
This is a custom replacement case for the RK61, designed with a PS1-inspired aesthetic. The goal was pretty simple: take the stock RK61 PCB and give it a completely new shell that feels more like a retro console accessory rather than a…
A replacement cover for a BigBen wireless adapter compatible with the PS1. The original plastic cover is too tall and it prevent inserting a memory card while playing. Some PS1 games does not read memory card on slot 2, so you have to…
Print in place (no hardware needed) clip-on pole saw pole accessory clamps are designed for easier transport of an EGO POWER+ PS1000 pole saw and two accessory 3.3' Carbon Fiber Extension poles between trucks, storage, and job sites. The…
I made these brackets to fix a Cyberpower CPS1500AVR battery backup device I purchased used. The L bracket / hooks that hold the front faceplate on were broken. Since straight gluing them would not be strong enough I created these small…
This is a remix of the lid for the Ramps 1.4 enclosure found here. https://www.thingiverse.com/thing:677892 The Kossel wording was removed and replaced with Prusa i3 Clone. Added v2 of the lid that has recessed lettering to improve…
All around enclosure for the Geekworm X-UPS1, a UPS for Raspberry Pi/other 5/12V based devices (like the Zimaboard). For anyone who's not so happy with the top/bottom only acrylic covers included with the device.
first attempt of making a 3d model , couldent find a holder for my ps1 fishing controller so had to make one
Show off your PS1 collection instead of hiding it in a drawer! This stand holds up to five original PS1 jewel cases in a stepped, cascading layout -- each cover tilted toward you and visible. The soft, rounded "pill" design gives it a…
Fan blade for the ELU PS174 miter saw. Fits a 17mm hexagonal mounting on the motor shaft. Caution during installation: Press it on as parallel to the belt as possible; otherwise, the belt will rub against the fan due to vibrations. Print…
![DIY Blueretro 5in1 [PS1, PS2, PS3, XBOX360] - guide on description](https://media.printables.com/media/prints/629834/images/4989945_188c260e-8dd5-41da-a0ac-36ffe29a7357_91bded45-4751-4250-9ef1-fa21992d5f44/photo_2023-10-28_23-53-27.jpg)
