Wyniki wyszukiwania: rack

Topology optimized shelf bracket - holds over 80kg each

Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…

Extended Set of Wooden Train Track with 50+ Unique Pieces

See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code and this T switch Track stands on your own table in AR, at…

🚉 SET: Lego DUPLO train tracks (optimized)

UPDATE 25.2.2022: check out my lego duplo BRIDGE ! https://www.prusaprinters.org/prints/137837-set-lego-duplo-train-bridges-optimized UPDATE 11.2.2022: added 0.3mm layer height gcode files for all tracks → faster prints , still looking…

Ultra Strong Corner Bracket - 5 Variations ( Parametric )

5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible

Filament Shelf Brackets

3D printable Filament Shelf Brackets make storing your filament a breeze! No supports needed. I recommend mounting a bracket to each wall stud. ¾" ID PVC Pipe (1" OD) will snap into place between brackets for easy assembly. EDIT 5/6/24:…

Connectors - Brio/IKEA Wooden Train Track

Various connectors compatible with Brio, IKEA Lillabo (old plastic dogbone and current wooden-only version too), Thomas Train, Kaufland, LIDL Playtive, kmart, ebay,... wooden tracks. UPDATE: 30 mm male-male connector! Print instructions…

Smoothed topology optimized shelf bracket - Flat & thicker back, smoothed body

I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…

19" 1U Rack with Moduler trays for Raspberry Pis

This is a 1U Server Rack rack/shelf designed initially to rack mount a bunch of Raspberry Pis. Each 1U shelf should hold up to six Pi 0/3/4/5 or some mixture with accessories. Every attempt is being made so that no supports should be…

10 inch Rack 1U : 2 x 3.5 inch HDD - HOT SWAP !

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Phone holder/bracket for monitor

GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…

18650 Battery Holder Bracket

Simple 18650 brackets to store your batteries safely, brackets can be connected together using the tabs on the side. Printing The model should be printed with the front section on the build-plate (see the 3mf file) and can be printed…

XBox controller and headset wall bracket

Wall mountable xbox controller and headset stand, xbox logo on top part. Category: Video Games

Philips Hue Bridge Bracket

This is a print of a bracket for mounting Philips Hue Bridge to a wall. Features: tight friction fit for the bridge ability to mount the bridge without disconnecting wires does not block access to the button and LEDs screw holes for…

IKEA Kallax Filament Storage Rack

Organize your 3D printing filaments with this simple and effective filament storage solution for IKEA Kallax shelves. This easy-to-print design consists of two parts: one for the front side and another for the back of the shelf. Print the…

Milwaukee Packout Wallmount Bracket

I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…

Slip Rod Cover For RepRack and RepBox

Optional addition to RepRack , default configuration comes standard on all RepBoxes v2.3.1 and up . The slip rod allows for much more lubricity than just trying to pull a filament spool on a piece of pipe alone. In addition the ribbed…

Hot Wheels Track Hanger

Hanger that slides onto the bottom of Hot Wheels Track. Then hooks onto string or cable. Note: Print file is four (4) hangers, an individual hanger takes about 20 minutes. Testing shows about one hanger per two pieces of track for best…

Electrical Bracket for Drywall | Old Work Low-Voltage Box | 1-Gang

If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…

Heavy-Duty Reinforced Corner Brackets

Please click ❤LIKE❤ if you appreciate my work 😊 Strong and reliable reinforced corner brackets for everyday DIY projects. Includes two versions: a compact 2-screw bracket and a 4-screw heavy-duty version for increased strength and…

Tennis Racket/Racquet Keychain & Ornament

Serve up some fun this holiday season with a tennis racket ornament! I think this racket looks relatively generic, but was based on the based on the Babolat Pure Drive if you're wondering. Could alternatively be used as a keychain. No…

Mini ITX server rackmount 2U

Intro I've designed this case as a replacement for my current home server. The drive capacity has increased so much the last years, you need a lot less drives to get the same or more capacity. My current home server is already 10 years…

PC Extension Card Slot Brackets in 30 Variation for Standard and Low Profile

Background I don't know if this happens to you, but maybe? You work in a profession or an industry, and everyone in your family and your circle of friends believes that you now know every detail that could be nearly related to it. "Hey!…

Small mechanical wound tracker / counter

A mechanical wound tracker / counter printable with 0.4 nozzle. It maxes out at 49 but is small enough, to have it on the battlefield near your operatives. Only one M3 x 8 screw is required for assembly. Some grease is recommended but not…

Fleshlight Drying Rack (Original and Go) print in place

PrusaCoreOne adapter for digital spool rack

The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…

Modular Wine Rack

This design is inspired by the GustaVino wine rack that you can read more about at http://www.gustavino.co.uk/. After having purchased this design, I was not satisfied with a number of elements: The print quality was poor due to the need…

IKEA LACK table strong and robust reinforcement bracket

Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…

Unifi AP AC-LR mounting bracket

Mounting bracket. Recommended to print with a 0.4 nozzle with a layer height of 0.2 or less! For material, something that's more resistant to heat than PLA is advised. Commenter @jornthree_2921709 recommends PETG or ASA. I've used a PLA…

Table angle bracket / corner brace (LACK-compatible)

Light tables like IKEA LACK family are not sturdy enough to withstand horizontal vibrations caused by a printer, they start shaking and wobbling worsening print quality, causing even more ringing, etc. This simple brace will make a table…

Millennium Falcon and Eppi Tube Rack

I was inspired by the millennium falcon tube holders from AtomicVirology (https://www.printables.com/de/model/114530-millennium-falcon-tube-holder-improved) and CFell…

RackStand / RepWinder Stand for RepBox 2.3.1+ and RepRack System

RackStand option for RepBox and RepRack systems. Also compatible with RepWinder and now allows you to use with v2.3.1 and up RepBox with slip-rod system. Open source 3D printable, laser cuttable, or cnc files and original Fusion 360 files…

Hot Wheels Track Connector

Basic track connector for hot wheels track

Ego Blower Wall Mount Bracket 615CFM

I designed this for my EGO 615. It uses very little plastic but is still very strong. I only print it with PLA and only 20% infill. The nice perk is that it has an angled design to help with self-aligning, so you don't have to be precise…

CalDigit TS4 Bracket

Need to mount your shiny TS4 under your desk or monitor stand? This print will do the trick. Once the bracket is mounted, the TS4 can be easily slipped in and out via the integrated retention clips. Simply attach the cables to the back…

PrusaXL adapter for digital spool rack

The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…

Big Tree Tech EBB36 V1.2 Bracket & Strain Relief for Stealthburner

I loved Zachary's model however noticed the new V1.2 of the BTT EBB36 board is larger and the model doesn't fit the board, I recreated a new version in Fusion360 for the new dimensions and it works a treat :)

Track Saw Waste-Side Kerf Jigs

Waste side jigs for track saws / guide rail saws / plunge saws. These are used when you want/need to have your guide rail on the waste side of the line. If you put the splinter guard up to the line on your workpiece, your workpiece will…

Gridfinity compatible 17ml bottle paint rack

New Version with bin to store additional painting tools. Also improved .stl and .gcode file for faster printing. Enjoy. credits to: https://thangs.com/designer/ZackFreedman

Nintendo NES cartridge rack / tower

Store 2 to 10 Nintendo games in a stack, so you can read the labels easily. I designed this in order to be able to print it on a small bed surface like the Prusa Mini: this is why you must print it upside down and not on its back.…

Modular Wine Rack

This is a modular wine rack system that can be assembled to create many different configurations. I have included a number of different configurations in the photos section, but don't let that constrain you. This system can be expanded…

Raspberry Pi 3 case Rack Mounted (1u) UPDATED

About Yet another Rpi case! I needed a simple rack mount case that did not take a million years to print, so I designed this. My pi3 is running pihole and the ubiquity controller software. Both of these apps are lightweight. Because the…

Rack adapter for TP-Link Omada devices

This adapter allows you to rack (19") network elements of the TP-Link manufacturer, more precisely the OMADA business range. Unfortunately the manufacturer has not planned to be able to rack this equipment via holes and brackets, many…

ZimaBoard Modular 1U Rack

Modular 1U Rackmount for ZimaBoards , to be co-located with Raspberry Pi and OpenUPS2. The design provides 5 “slots” to make up the 19" rack, which can be made from a combination of single and double-width holders which are secured…

Modular Test Tube Rack (ISO 4142:2002)

A stackable, interlocking modular holder for vials and test tubes in accordance with ISO-4142-2002 standard. A single module dimensions are 90x90x50mm. One module has the following openings: 2 x 25mm (for tubes of diameter ⌀24mm) 6 x…

IKEA LACK reinforcement bracket

A reinforcement bracket designed to stabilize all sorts of IKEA LACK enclosures. Use 4x20 mm wood screws for mounting. The upper leg screw holes need to be pre-drilled with the whole screw length, but you can also leave those empty as I…

Train Tracks

A small collection of tracks I modeled as a present. They should fit an Thomas the Tank engine track set but I've only tested it on one. Includes: 1 straight section 1 flex section 2 three way forks 1 intersection Print instructions For…

Tennis Racket Key Ring with your name

Model This model is a keyring in the shape of a tennis racket. Use it to decorate or label your tennis bag or other accessories. There are two versions: The " Tennis Racket Key Chain " is the original model, which is a more accurate model…

Spell Slot Tracker • TTRPG • Dungeons and Dragons • Spell Counters DE and EN

With thse Spell Slot Trackers you have the number of open spell slots for your caster always in sight. One d6 dice per spell slot level is used to keep track of the number of open slots. This version "Half Caster" has dice slots for spell…

IKEA drawer support bracket repair - screw-type

What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…

PCI bracket for 120mm FAN

I needed to cool down my 2x10Gbe Ethernet card, NVMe drives and SAS card.

Wall Bracket for Dyson Casdon Toy Vacuum

The Dyson vacuum cleaner toy is a great thing to keep your child busy while using the big vacuum yourself. But most of the time this thing just keeps lying (and flying) around in our closet which is quite annoying. So I made a wall…

Ping Pong Ball ~ Table Tennis Ball Rack~ Dispenser

This is a simple, elegant wall mounted rack for storing table tennis balls. The balls are held securely and won't be dislodged by wind if, like ours you have them stored on a verandah, but they are easy to remove and replace one at a…

TP-Link Tapo C200 Bracket

TP-Link Tapo C200 is a nice IP camera from TP-link. This is a bracket allowing it to wall mount in upright or downright position.

McLaren F1 LEGO Wall bracket

Printet on prusamini with low detail and 15% infill

Customizable 19" Rack Rails for Audio/IT Gear

About I love 19 inch rack gear and I try and rackmount everything I can in my audio and home tech setup. Cutting aluminum beams isn't always an option so I thought I would make a custom setup for my electronics workbench to tidy up the…

Open VSlot 2020 Corner Bracket - Two sizes

Open VSlot 2020 Corner Bracket - 62.5x62.5x20mm & 100x100x20mm - Strong - M4 Screws

PS2 Replacement Bracket for Noctua 60mm Fan SCPH-50004

Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…

12th Gen Intel NUC - 10 Inch Rackmount

Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…

HSW Screwiverse Flat Wall Tape/Glue Brackets

Check the Screwiverse Remixes for other attachments designed for these threaded inserts. These don't fit when the original HSW base/hollow inserts were printed highly overextruded. This is actually something I'd like them to do (that's…

Modular 10 inch rack 2U ITX case + storage mount

I designed this mini-itx case for the 10 inch rack i printed. The tray and the frontpanel are modular so you can remix the frontpanel without printing the whole model again. The case will fit a mini-itx motherboard and 3 2.5" ssds/hdds. I…

UAD-2 Satellite 1U Rack Mount

I designed this rack mount bracket so that I could install my two UAD-2 Satellite Thunderbolt units in my studio's rack mount cabinet. While Universal Audio does not make a rack mount bracket for these units there are unused screws on…

2 mL Tube Rack: Secure Eppi Storage Solution in various sizes

Eppendorf Tube Rack with Spring Mechanism Available sizes 2x16, 4x16, 6x16, 8x16 3x8, 4x8 3x6 Description Tube rack designed to hold your Eppis tightly with springs. I find this useful for storage of large collections of tubes, to avoid…

7th Gen Intel NUC - 10 Inch Rackmount

Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…

ZimaBoard 1U Rack Mount with optional SSD Mounting

Horizontal 1U Rackmount for ZimaBoard with support for between zero and two, 7mm high SSD. If installing 2 x 7mm this will take the overall height over the 1U height (44.5mm) to around 51mm. The rack mounting holes are designed for M6…

Hyte Y60 Fan Bracket (3x120)

Hyte Y60 Fan Bracket (3x120), I made the second version of the https://makerworld.com/en/models/138628#profileId-151004

Dual Screw Mounting Brackets for Govee Permanent Outdoor Lights - Model H705

Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…

VIVE Tracker 3.0 Shoe mount

Got uncomfortable and fed up with tracker straps and designed something more sturdy, comfortable and practical. Designed to fit HTC Vive Tracker V3.0 USB available without removing the tracker 1/4” printed screw to fasten the tracker…

Multipurpose Mini Gym Rack

This is a weights rack inspired by your neighbourhood gym in desk-size for your pens to show off just how much you love to lift pens while at work. The model files are in the right orientation for printing and do not require any…

Strong Furniture Shelf Bracket

Never let your shelves sag again with these strong and stylish furniture shelf brackets. Optimized for the Prusa Mini, these brackets are easy to print and will provide sturdy support for your shelves. Features: Strong and durable design…

Govee Outdoor Pro Light Power & Switch Brackets

Like this mount? Check out our brackets too! https://www.printables.com/model/1083606-govee-compatible-bracket-for-permanent-outdoor-lig Brackets to mount the power brick and switch brick for Govee Outdoor Pro lights. Suggest printing…

Tobii Eye Tracker 5 Flex Mount stand

Are you tired of your Flex Mount falling off constantly? Do you still want angle adjustment for your tracker? Fear not, this slightly oversized stand is here to help! The stand is designed to clip onto the 6 support struts on the bottom…

Mikrotik RB5009UG - 10 inch or 19inch rackmount kit

an easy-to-print ram mount holders for Mikrotik RB5009 for 10inch or 19inch rackmounts.

Buffer Stop Track - S

Double-sided short-length straight rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…

Tennis racket wall mount v2

This is version 2 of the tennis racket wall mount, made of 2 parts so that the mounting mechanism is hidden and there are no visible screws. It still holds 3 rackets but only uses 2 screws. Note: I wanted to make a nicer design with no…

Tobii Eye Tracker 5 mount for Samunsung G7 (1000r curved monitor)

A mount i made for my eye tracker 5 to mount on my Samsung G7 monitor. This mount allows you to still operate the joystick/power button. The large center de-boss is to aid with aligning the camera module, and the notch is there to help…

Remixed Wooden Train Track Bridge

MobyDisk's OpenSCAD train track library SE has some AMAZING parts, but I wasn't a fan of the bridge, because you'd still require a block to support the track spanning the bridge. I took the bridge ramps into TinkerCAD and added a…

SSD M.2 Hard Drive Mounting Support Bracket for Dell G15 5510 5511 5515

M.2 SSD mounting plate for DELL laptops.

TP-Link ER605 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…

Shelf Supporting Bracket (Strong!)

If you look at/read the world shelf too many times it ends up not feeling like a real word. So you might as well download now so you don't have to read it so many times. I would print in PETG if you need real strength.

Under Desk Mounting Brackets - QUBE 500

These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…

Hay rack for guinea pigs, rabbits

x = 140 mm, y = 89.07 mm, z = 126.56 mm

Vertical Universal Gun Rack- 2 parts, 3 Screws. 100% effective.

Universal Gun Rack Idea made for any size, length, shape, also editable for any needs. Can be mounted in any way, shape, or size. editable and customizable complete vertical storage racks. Uses 2 normal #6 drywall screws for the bottom…

LSI 9211-8i Full Height PCI Bracket

I designed a PCI full height bracket for my LSI 9211-8i HBA card since it didn't come with one. I used two M3x8 screws that can cut their own threads, but you can also use M3 nuts to secure them (I did). The two holes are spaces 54mm…

Mini Straight Track - B2

Double-sided mini straight rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…

120mm Fan Mount Brackets for 5.25" Drive Bay

I have an older Cooler Master CM 690 II Advanced that I still like a lot but it lacks space for intake fans like modern cases. These brackets allow for a 120mm fan to be mounted along with one disc drive in the 5.25" bays. This helps push…

VIVE Facial Tracker Mount for Varjo Aero

Tested to work nicely on Varjo Aero headset. Don't use PLA as it will make the mounting fingers too fragile. Printed in vertical orientation with generous supports. Update about XR-3: This occludes the LiDAR in the center and can leave a…

Buffer Stop Track - R

Double-sided short-length straight rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…

Eppendorf (Microcentrifuge) Tube Rack

This Eppendorf (microcentrifuge) tube holder took inspiration from Stefan Huber's model ( https://www.printables.com/model/310767 ). I tried printing Stefan's model numerous times but the spring part of the rack was consistently failing…

Buffer Stop Insert - Brio/IKEA Wooden Train Track

Print with the stop pointed up, no support, 15% infill. I did 1mm walls and top/bottom layers with a 0.4mm nozzle at 0.2mm layer height.

Dell Optiplex 5070 with Keystone Port for 10" inch rack

10" Rack tray to hold a Dell Optiplex 5070 (although other Optiplex models should fit) but also with an option to add a keystone jack (see my other models if you want to test print the same port to test). ** NOTE: These Rack components…

Stackable Shoe Rack using IKEA BURHULT

This is a 100% re-model from 3DDIY Stackable Shoe Rack, adapted to fit IKEA BURHULT . I've included the .stp file, so you can remix it further. Parts For assembly you will need: printed parts 1x IKEA BURHULT For parts print the following:…

Strong Corner Brackets - multiple variants and sizes, easy to print and free

Strong and easy to print corner brackets. Printing tips Use stronger materials such as ASA 275, PETG or Modified PLA (e.g. Strongman) Set infill to 20% Print without supports Suggested resolution is 0.2mm Variants Small - 25mm Three…

Under workbench C shape brackets long level holder

I needed a shelf to hold my 1m level and long ruler in the garage, so I quickly modelled these C-shape brackets to do the job. For my purpose, I used 3 of them, but more or less would work just as well. They are strong enough when printed…

Hotwheels track display corner pieces

90 Degree track pieces that allow you to connect two of the Hotwheels Track Displays (https://www.printables.com/model/778227-3-tier-hotwheels-track-display) together forming a mega display that can hold 42-44 cars!!! fast and easy to…

Rapid Print Track connector for Brio / IKEA wooden track sets

Update 2024.01: Added the S-Connector and extra long version for those tracks that just dont fit. Newly designed to be a rapid print and low material version of the loved track sets. If you have these train sets, you know that these…

TP-Link TL-SG1008P 3U Rackmount Adapter for 10-inch Network Cabinets

This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…

Arrow Shaft Yagi Antenna Bracket

This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…

Topology optimized shelf bracket

Topology optimized shelf bracket for a small shelf with a depht of 10 to 15 cm. You can mount it to the wall with 4-6mm screws and secure the board with a short screw through the top. The model can be printed perfectly without supports.

Regalwinkel / Angle Bracket for Shelf

Metal rods for board in cabinet wern´t enough to support weight. So I designed some brackets with to holes to screw them in place. When I uploade the model I realized there were already some similar models so I added this my model as a…

10th Gen Intel NUC - 10 Inch Rackmount

Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…