Wyniki wyszukiwania: rak19007

Sortowanie

51 modeli

P
PrintablesTonyG

RAK19007/RAK5005 case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Pobrania
5565
Polubienia
454
Ocena
4,95
P
PrintablesTonyG

RAK19007-mini/RAK5005-mini case for Meshtastic

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Pobrania
2331
Polubienia
272
Ocena
4,92
P
Printablesstokey3D

Meshtastic RAK19007 WisBlock Case

This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…

Pobrania
1205
Polubienia
168
Ocena
5
P
PrintablesTonyG

PocketMesh R2 case for Meshtastic (RAK19007)

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…

Pobrania
826
Polubienia
108
Ocena
5

NodeBrix Modular Case System for Heltec LoRa32 v3 and RAK19007 for use with Meshtastic

Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…

Pobrania
743
Polubienia
137
Ocena
4,5
P
Printablesnano

RAK19007 WisBlock Base Board Mount

RAK19007 WisBlock Base Board mount with 4mm mounting holes that fits an electronics base board with a 5mm grid spacing.

Pobrania
728
Polubienia
65
Ocena
5
P
Printableseddie899davis

RAK19007 Radio Style

required equipment power switch of your choice 10000mAh battery gps module ipex to sma connector/wire "soldering/heat shrink m2.5 x 4mm bolts for mounting switch otherwise its the same as the original.

Pobrania
597
Polubienia
74
Ocena
5
P
PrintablesKBOX Labs

RAK19007 Mounting Plate

v2 Update : A little bit slimmer profile, and some model flaw fixes. Designed as a small profile mount for the Wisblock RAK19007 board from RAKWireless. This will allow it to be screwed to a basic enclosure grid mount found in a lot of…

Pobrania
495
Polubienia
54
Ocena
5
P
PrintablesKorbyn

RAK19007 Rugged WisBlock Enclosure

RWE (Rugged WisBlock Enclosure) is a remix of the open-source ruggedized T-Beam enclosure, now for the RAK19007 WisBlock base board with RAK4631 (LoRa) and RAK12500/1910 (GNSS/GPS) modules. This induces a couple important build and…

Pobrania
418
Polubienia
78
Ocena
4
P
PrintablesTonyG

PocketMesh R2-XL case for Meshtastic (RAK19007)

**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…

Pobrania
418
Polubienia
63
Ocena
5
P
Printablesdenis

RAK19007/RAK5005 case for Meshtastic & N-type antenna mount

Summary This is a case for RAKwireless RAK19007 and RAK5005 base boards with an N-type antenna. My goal was to create a thinner case to accommodate an N-type antenna connector. The current design works but could be improved, for example a…

Pobrania
320
Polubienia
60
Ocena
4,5
P
PrintablesDarkextratoasty

Weatherproof Meshtastic Enclosure RAK19007/RAK19003 + GPS + 4x 18650 batteries

This is meant to be a stationary node, not a portable handheld device. It features: compartment for up to 4x 18650 lithium-ion cells (long enough to accommodate protected cells) M2.5 mount points for RAK19007 or RAK19003 base board M2…

Pobrania
249
Polubienia
95
Ocena
0
P
PrintablesFrank Black

RAK19007 Wisblock 18650 case

This is a water resistant enclosure for RAK19007 Wisblock. Its powered by a user removable 18650 battery. This case aims on modularity, the core module where the radio is mounted, is removable and can be mounted on different appliances.…

Pobrania
218
Polubienia
57
Ocena
0
P
Printablesshallax

RAK19007 Radio Style Insert for Meshnology 10,000 mAh battery

Modifications to fit a physically largery battery

Pobrania
202
Polubienia
26
Ocena
0
P
Printablespdxlocs

Rak Unify Enclosure Simple RAK19007 Mounting Plate

A simple mounting plate for a WisBlock Base (RAK19007) inside a Unify Enclosure. Fusion 360 File included. Category: Electronics

Pobrania
170
Polubienia
25
Ocena
5
P
PrintablesDarkextratoasty

Meshtastic RAK19007 Dual 18650 Weatherproof Case

This page and the models are a work in progress, I have some other versions of the models I'd like to add and there are some details I'd like to add to this page. To-Do List Add file name explanations Add BOMs for various versions Add…

Pobrania
168
Polubienia
32
Ocena
5
P
PrintablesNate Walck

RAK19007 + Rasberry Pi 4 Outdoor Box Mount

Mounts for components commonly used in Meshtastic outdoor installations utilizing a weatherproof box. These mounts are for: RAK19007 WisBlock Board Raspberry Pi 4 Heltec v3 coming soon. They are meant to be used with a box which uses a…

Pobrania
146
Polubienia
35
Ocena
0
P
PrintablesSliver3d

RAK19007/19003 Zulkit Mounting Plate

Here is a quick mounting plate for RAK19007/19003 that uses M2.5 heat inserts for mounting in a Zulkit junction box size 5.9" x 3.9" x "2.8. https://a.co/d/6S0OTV3

Pobrania
120
Polubienia
13
Ocena
0
P
PrintablesVoldDesigns

RAK19007 WisBlock / WisBase Stand-off

Used with waterproof junction box containing 5mm grid . Holes: Sized for M3 bolts (30mm x 30mm spacing or "6, grid squares") Stand-offs: Sized for M2.5 threaded insert. Depth is 5mm. RAK19007 comes with M2.5 hardware for mounting

Pobrania
106
Polubienia
15
Ocena
5
P
Printablesneatstranger

Meshtastic Solar Node - RAK19007 - Fusion 360 / STEP

Set n Forget - Rooftop Solar Node Struggling to get the most out of your meshtastic portable node? Would you like to chat with other users from hundreds of KM away? Then this is the node for you! LIMITED BILL OF MATERIALS SET N FORGET…

Pobrania
104
Polubienia
36
Ocena
5
P
PrintablesPAUL HODARA

Modular Case for the RAK19007 WisBlock running LoRa and Meshtastic Projects

This is a modular case for the RAK WisBlock Starter Kit with the 19007 baseboard. The idea behind this project was to make a simple-to-assemble and customizable case and also eliminate screws, washers and fasteners other than those that…

Pobrania
100
Polubienia
15
Ocena
0
P
Printablesdreimal_8

RAK19007 enclosure for N-type antenna

This is a remake from "NodeBrix Modular Case System" from "Open Source Country". Thanks for the great work!!! I only remaked the frame for the RAK19007 for n-type antenna and the front (and back) cover. Printed with PLA on Anycubic i3…

Pobrania
90
Polubienia
16
Ocena
0
P
PrintablesLuke

Meshtastic radio case for the WisBlock Base board (RAK19007)

Meshtastic Radio Case for WisBlock Base Board (RAK19007) This is a custom-designed Meshtastic radio case specifically made for the RAK19007 base board and RAK4631 core combo RAKwireless WisBlock Meshtastic Starter Kit US915 SKU 116016 –…

Pobrania
69
Polubienia
19
Ocena
4
P
Printablesaudiocustoms

JUGGERNAUT System - LoRa / Meshtastic Transceiver Case for RAK19007 Base Boards

Sumary The JUGGERNAUT System features a set of enclosures and parts to integrate LoRa-Transceivers, Smartphones and Antennas into your tactical equipment setup by mounting the individual components to your Molle / PALS System. The…

Pobrania
67
Polubienia
28
Ocena
0
P
PrintablesDNS

Solar Mount Braket For RAK19003 & RAK19007 + Battery Tray

Battery Tray V2 (01/17/2026) Adding an additional battery tray for better clearance. This is the battery tray that I would recommend using for the 5.9"x3.9"x2.8" junction box (second to last photo) Original The smallest size that this…

Pobrania
65
Polubienia
13
Ocena
5
P
PrintablesAvtomat

NodeCube RAK19007 RAK4631 Meshtastic Solar Node

This is a compact solar Meshtastic node for outdoor use. Materials List: RAK19007/RAK4631 Meshtastic Board Battery with JST PH2.0 Connector (I used the Qimoo 115659 5000mAh 3.7v LiPo) 915mHz LoRa Antenna (I used this:…

Pobrania
59
Polubienia
18
Ocena
0
P
PrintablesWooddab

RAK19007 Solar Enclosure for Meshtastic

Want a smaller version? Check out my other version for the RAK19003 and a 0.6W solar panel, it's about half the size and has all the same features. IMPORTANT! This model uses lithium batteries which can cause injury or death if…

Pobrania
50
Polubienia
32
Ocena
5
P
Printablesyodakubota

RAK Wireless RAK19007 Kit Mounting Plate

3 perimeters 15% infill Printed with PETG No supports required Iron top surfaces (optional) EDIT: Replaced model file with corrected file. Original file had mounting holes at 5mm apart, but was not on a 5mm grid. Changed spacing for 5mm…

Pobrania
50
Polubienia
9
Ocena
0
P
PrintablesSidpatchy

Meshtastic RAK19007 WisBlock Case w/BNC and SMA

Adds flush-mount BNC and SMA (optional) connectors to @stokey3D's design. BOM 1x BNC bulkhead ( amazon.com ) 1x SMA bulkhead ( amazon.com ) 1x 10,000mAh LiPo battery ( amazon.com ) 4x M3x10 (BHCS-preferred) 1x RAK19007 baseboard Designed…

Pobrania
50
Polubienia
8
Ocena
0
P
PrintablesPatrick

Rak Unify Enclosure RAK19007 Mounting Plate with Battery

Remixed @pdxlocs to allow for a battery to be placed underneath

Pobrania
49
Polubienia
10
Ocena
0
P
PrintablesStrydr

Meshtastic RAK19007 WisBlock Case with waterproof switch

Parts list included. I made some small adjustments to add the switch and external BT antenna. Tolerances are very tight to keep the model as waterproof as I can. Gaskets are printed in TPU, the rest was tested with PLA and ASA (shell…

Pobrania
45
Polubienia
3
Ocena
4
P
Printablesnvertedflyer

RP-SMA and F type connector adapter for Meshtastic RAK19007 WisBlock Case

This is an adapter to use RP-SMA and/or F connectors with the excellent RAK WisBlock case made by @stokey3D_252878, located here: https://www.printables.com/model/9289

Pobrania
45
Polubienia
6
Ocena
0
P
Printableslameant

RAK19007 base plate for outdoor box

Plate is friction fit, once assembled - push it down. Also added a back plate for pole mounting, I recommend ASA for UV protection, also try to print it as solid as possible. For inside I used Bambu PLA, remember ABS/ASA shrinks. Items…

Pobrania
37
Polubienia
12
Ocena
0
P
Printablesclif

RAK19007 mounting plate for 100mm spaced M4 screw enclosure

Simple mounting plate for a WisBlock RAK19007 for use in enclosures that provide only two M4 attachment points, 100mm apart on center. No supports needed.

Pobrania
34
Polubienia
3
Ocena
0
P
PrintablesAlekoy

Button cover for TonyG's RAK19007/RAK5005 case

Dust cover for the user button on the TonyG RAK19007/RAK5005-case. The fit is pretty tight, so I ended up putting the button inside the dust cover before putting the assembly into the hole in the case. Print this in some soft TPU, install…

Pobrania
29
Polubienia
3
Ocena
0
P
PrintablesDaniel Smith

RAK19007 Meshtastic Mounting box

So this is a box i made to mount my Metastatic node… The 3D printed parts form the Base and Lid that should be printed in a suitable weather resistant material, I used PETG but ASA would probably be best and a Gasket that should be…

Pobrania
28
Polubienia
7
Ocena
0
P
Printableswestcoastcomms

LabStack RAK19007 Module for Meshtastic

This is a LabStack module for a RAK19007 LoRa board with 1.3" OLED display for Meshtastic, Meshcore, or Reticulum RNode. It is designed to mount in a 2U LabStack Mini bracket. The board mounts on the backside with the screws included in…

Pobrania
17
Polubienia
7
Ocena
0
P
PrintablesKepler

RAK19007 Mount

2 mounting options for a RAKWIRELESS RAK19007 board One with stands and one with M2.5 screw holes. This was an exercise in taking the schematics for the RAK19007 and creating a simple mount. I don't own the board, and may not have one…

Pobrania
17
Polubienia
1
Ocena
0
P
PrintablesBradon Cohorn

Meshtastic Rak19007/5005 with Battery Holder

@BigTuna_3247047 did a great job making this file. I remixed it to work with the Rak19007/5005. Works great.

Pobrania
16
Polubienia
6
Ocena
0
P
Printableswebdevvie

RAK19007 & RAK19003 + solar 18650 charger mounting plate for electrical box

I recently bought these boxes for meshtastic nodes. I made a mounting plate for inside the box for my Lora mesh nodes using the 19007/19004 mainbords and a seengreat solar power board for an 18650 cell. The solar board has the screw holes…

Pobrania
15
Polubienia
4
Ocena
0
P
PrintablesBernd Giesecke

RAKwireless RAK19007 Edu Stand

Building something different every day with RAKwireless' WisBlock Modular System???? Ever thought it would be nice to have a protective cover, but still have easy access to the WisBlock Core, Sensor and IO slots? Then this little stand…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesDestrokhan

10 inch rack mount WisBlock RAK19007

This mount was remixed to fit in Vladimir Varzaru's 10 inch rack 1U 3xRPI mount using nano's RAK19007 WisBlock Base Board Mount to mount a WisBlock RAK19007 board in a 10 inch server rack.

Pobrania
4
Polubienia
2
Ocena
0
P
PrintablesChri100ff04

Slim MagSafe enclosure for RAK4631 + RAK19007 for Meshtastic / Meshcore

Outer size 65.2 x 60.2 mm, 12.2 mm thick Parts base_plate.stl plus one lid: lid.stl (flex antennas inside) or lid_sma.stl (SMA whip antenna) Screws 4 x M2 x 6 mm countersunk (flat head). M2 x 8 also works. Magnets 54 mm MagSafe magnet…

Pobrania
1
Polubienia
1
Ocena
0
P
PrintablesMatt Sellars

RAK19007 Solar Enclosure for Meshtastic (Larger Battery)

Same as original except for larger 8000 mAh battery (from Rokland) purchased with 190007 WisBlock kit. Mods and parts: Changed the radio board mount to be vertical so plugs didn't interfere with larger battery. Updated mount points for…

Pobrania
1
Polubienia
0
Ocena
0
P
Printables

Modular Case for the RAK19007 WisBlock running LoRa and Meshtastic Projects

This is a modular case for the RAK WisBlock Starter Kit with the 19007 baseboard. The idea behind this project was to make a simple-to-assemble and customizable case and also eliminate screws, washers and fasteners other than those that…

P
Printables

RAK Wireless RAK19007 Kit Mounting Plate

3 perimeters 15% infill Printed with PETG No supports required Iron top surfaces (optional) EDIT: Replaced model file with corrected file. Original file had mounting holes at 5mm apart, but was not on a 5mm grid. Changed spacing for 5mm…

P
Printables

Solar Mount Braket For RAK19003 & RAK19007 + Battery Tray

Battery Tray V2 (01/17/2026) Adding an additional battery tray for better clearance. This is the battery tray that I would recommend using for the 5.9"x3.9"x2.8" junction box (second to last photo) Original The smallest size that this…

P
Printables

Meshtastic RAK19007 Weatherproof Case (18650 & GPS)

RAK19007 Weatherproof Meshtastic Node Case A rugged and compact weatherproof (not submersible) case designed specifically for the RAK19007 WisBlock board. This design features a highly organized internal carrier frame and custom TPU…

P
Printables

10 inch rack mount WisBlock RAK19007

This mount was remixed to fit in Vladimir Varzaru's 10 inch rack 1U 3xRPI mount using nano's RAK19007 WisBlock Base Board Mount to mount a WisBlock RAK19007 board in a 10 inch server rack.

P
Printables

Meshtastic RAK19007 WisBlock Case

This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…

P
PrintablesHarriJ

Meshtastic RAK19007 Weatherproof Case (18650 & GPS)

RAK19007 Weatherproof Meshtastic Node Case A rugged and compact weatherproof (not submersible) case designed specifically for the RAK19007 WisBlock board. This design features a highly organized internal carrier frame and custom TPU…

Polubienia
18
Ocena
5