395 modeli
This is a set of wasp & hornet trap attachments for common (discarded) domestic food packaging containers. They will fit plastic milk containers, mineral water, carbonated-drink and jerry can containers (see specs below). Clear containers…
Wydruk około 4,10 €–5,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 3D-printed cargo strap clip is designed to slide over a rolled-up cargo strap, keeping it neatly coiled and preventing it from unraveling during storage or transport. Perfect for keeping your garage, workshop, or van organized! These…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
UPDATE: The .stl file now has the slot in the tab! This is a very slight remix of the Dessicant container by @biketiger. Scaled to 150%, and added a tab with slot to easily zip-tie to the inside of your crab pot or trap, or shrimp, etc.…
Wydruk około 4,02 €–4,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Too much of sewing is pinning and measuring and I get bored easily! I got tired of making double fold straps so I made a giant bias tape maker instead. This is for 90mm/3.5 inch wide fabric strips. This was made using the customizer by…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
A small sized bowl with 2cm height and 6.836 cm in width 4.99 grams of filament on a Prusa mk4 print time is 34 minutes. settings don't matter. I printed in transparent PLA filament. it is sturdy and will not break. If you are using a…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
My helmet has no D-rings and I needed a way to hang it on the bike. Direct fitt for first Gen WeeStrom, but worked on my TransAlp and will probably fit others. Ratchet works with my Schuberth and, again, will probably fit others.
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing Instructions: All of these straps are optimized for 95a shore hardness TPU The simplest explanation of the print settings is that FOR THE CENTER SECTION ONLY you need to set the top and bottom layer count to 0, set the wall count…
I increased the height (up to 5.5 cm inside) of the excellent 3D model of Plastic bag roller from Andrey Shayter so that boxing Hand Wraps could be placed in it (or any other wide tape) . Saves a lot of time. Thanks to Andrey Shayter for…
Hello everyone! I would to share with you my Switch's JoyCon grip and straps stand. I also designed anti-slip feet printed out from flexi filament, whitch help keep stand in place. It's not necesary to print flex feet and Nintendo's logo,…
Si vous aussi vous en avez marre de votre housse de matelas qui se détache pendant la nuit, voici ce qu'il vous faut ;-) Impression sans support, le modèle a des mini support a retirer après impression comme sur la vidéo, penser a limer…
I used the Golf Ball Marker Template from Thingiverse (https://www.thingiverse.com/thing:3830902/files) an added the RPT pattern from the Original Callaway to it. For best fitting i had to scale to 101% maybe for your Printer you have to…
Collection of ear savers / mask straps I have found
There are now two options to join the pieces: with glue (choose the files with the word glue ) or interlocking them (choose the files with the word click ). If you need to build a square box, print 8 Corners clamp for cargo straps glue 4…
Also try my new version with increased scrap capture ability: added fins! A small container to clean the (kitchen) counter. I use it mainly for vegetable scraps to throw in the composting bin later. It can be used to throw your peels in…
Love the remix that Comrade 3D did, but I needed to add a built-in tensioner to flatten out the wrap as it's being rolled. The existing model is great, but I found I needed a 3rd hand to keep things tidy - this remix is to help with that!…
First (and working) draft of battery covers for the Quest 3 controllers with a loop to use the stock wristbands as controller grips. Like a cheap version of the official “Active Straps”. These were created really quick using tinkercad.com…
Masterful Dungeons Floor Traps are designed as part of the Masterful Dungeons modular dungeon system. These tiles introduce interactive and hidden hazards into dungeon layouts while remaining fully compatible with the double-sided tile…
Ball marker for the rapsodo mlm 2 pro Originaly designed by Kevin Wood (facebook) and tested by multiple people and me. Comments: - Sharpy or other waterproof marks can leave marks on an impact screen - Use the blacked marker you can…
Here you have 3 different designs of snail traps for you to print and finally manage to control this pests in your aquarium, according to your needs! Snail Trap A: Bigger model; High holed cilinder where you deposit the snail bait inside.…
Esposas de tobillos para la practica de Bondage. Ideales para restringir el movimiento. Se pueden acompañar con cuerdas o cadenas. Las fotos que podéis ver esta impresa en boquilla 0.4 y altura de capa 0.2.
This is a wall-mounted trash can to put your leftover filament in or to collect other waste. The easy-to-use hanging system allows it to be placed on horizontal and vertical cement joint lines. This trash can has a capacity of 10 cm deep…
A simple remix of Mistertech's wasp traps. I added some gussets near the entrance holes to make the print a little stronger since it broke the first time it was knocked over.. I also added a 3mm hole with some support so you can thread a…
So you washed your boxing wraps, but do you dread winding them up by hand into little spools? The Master Wrap Machine 5000 does this for you in no time! Features: Simple, robust, functional design. Build to last. Handles a wide variety of…
Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…
Edge protector for use with 1" (25 mm) wide tension belts when securing loads. Protects the edges and forms a larger contact surface. A simple version and a version with clips are available. Through these, the edge protector automatically…
3 part print that holds an AirTag on your dog's collar or any strap up to about 30mm wide and 3mm thick. Fusion360 file included so you can easily make it fit your collar/strap. Printed at .2mm layers, 3 perimeters in Prusament Azure Blue…
I made this to hold my Betafpv Lava 450 packs, but you can find the (super simple) source in the downloads so you can easily edit the dimensions. Print out of TPU.
If you'd like a commercial license to sell physical prints of this model (It's a best seller on Etsy), please join my paid Club membership . This is a continuation following comments from the original model that only have band loop on one…
The flexible strap replacement Swatch Irony Chrono 19mm watches. Three kinds of watch straps Classic, Flex, and Fitness.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
I needed pipe straps for a project, but couldn't find the exact size I needed. So I figured as long as I'm whipping some up in CAD, I might as well make all the sizes. So here are some common sizes for Schedule 40 PVC pipe, and the…
These tank traps aim to represent the specifications from here, adapted for tabletop wargaming: https://en.wikipedia.org/wiki/Czech_hedgehog You need to print Leg_Basic once and Leg_Connectors twice. Make sure to NOT use super glue when…
WPI, meaning "Wraps per inch," is a way to measure the weight, or thickness, of an unlabeled yarn. It is the number of times that a strand can wrap around a 1-inch long area without overlapping. This gauge tool includes a 1-inch long…
This is a redesigned case based on Malolo's RPi4 Case. This was designed to fit the Raspberry PI 4 Model B with a Noctura 5V 40mm fan.
None of the adapters I tried had the proper curve to mate up to the arms on the Quest 3, so here's my attempt at one that's working well for me. There are two versions - one that needs supports (shown on the headphone jack side) and one…
Similar sizing to existing backstraps with the addition of an xs and xl. Fills in the gap behind the 10 round mag. If you like the design help me fund more pews. https://paypal.me/Bernsy97?country.x=US&locale.x=en_US
A convenient receptacle capable of trapping and containing pesky purge lines, skirts, ooze or other printing scrap. If you have been printing for a while, you know that those scraps--especially skirt loops--hate to be contained in small…
I like @extrutim's cable strap but found that straps printed with PLA and PETG broke easily after a few open-and-closes of the latch. On the other hand, TPU straps have worked fine for me. Alas, I found it basically impossible to push a…
Having recently purchased an Original Prusa i3 MK2 (and now MK3/S/+), I was originally dissatisfied with the poor bearing mounting method that can easily introduce variability in the Y and Z axes. Inspired by other overly-complicated…
*** Thanks for checking out this model! If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Recently I found myself singing: “I fought the saw and the..saw won. I fought the…
I've lost my JoyCon straps and found hard to find replacements online. So I designed a 3D printed replacement that works just as fine. Print is provided with two design variants. One screwed, one glued. You'll need a few aditional acces…
Modell wurde um Ausschnitte für Kabelbinder oder Klettbänder erweitert. Vielen Dank an brahoy für die Vorlage.
These are some simple shoulder straps that people can use to mimic the ones seen in season 3 of the Mandalorian
First design from scratch for TPU, used Sain Smart 92A TPU in blue, Fusion 360 archive is parametric so you can adjust overall length along with thickness, width, etc.
TESTED AND WORKING!!! NO SUPPORT REQUIRED :D (Tools needed: hair dryer with hot air+flat head screw driver) A design Im working on for a friends disabled guinea pig. has room for approx. 1" straps. Here are the wheels-…
Some endcaps for the ThinkPads 65W charger to wind up the cables with and keep them tidy. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: .2 Infill: 20 Category: Organization
I wasn't able to find a stand that I liked, so I designed one. This stand will hold 4 WiiMotes and has space to contain their wrist straps. It will not fit WiiMotes with the protective silicone cover, nor does it have space for the…
These clips can be used to add paracord straps to any bag with 1 inch molle straps. Designed to have 4 passes of 550 paracord through it. No supports. 0.2 resolution. 50% or better infill. PLA+ or better filament. There are instructions…
It is easy and support free to print. Set the infill to 20% minimum.
An ultralight Everyday Carry (EDC) utility attachment designed to slide directly onto your backpack's shoulder straps, providing a dedicated, secure anchoring point for carabiners, keys, water bottles, or pouch clips. The design features…
Adjustable Straps for Face shield - A4 binding sheet - easy punching Print two straps per Face shield. Another mix of the FaceShield made a plastic strap due to concerns about fabric elastic bands harboring virus that is hard to kill.…
What is it? Replacement straps for 3M gas mask. Two pieces printed out of flexible filament. I used extrudr TPU medium flex filament. Why make it? Originals broke. Latest revision Designed with FreeCAD 0.19 BOM Strap side with pockets…
First of all I want to thank mr_vinn for the model he provided. This model is suitable for 20 mm straps, I also changed the design of the bars and of course the space for the magnets. For this model I used magnets with nominal size of 6…
Trapstar Keychain & Logo Contains multiple versions: Hollow - Keychain with text Solid - Plain Keychain with no text Horizontal & Vertical - different orientation of hole for keyring - see bellow Also contains models with no hole for…
Print in something strong (Polycarbonate or ASA or similar), in the orientation the parts are in the model for maximum strength, without supports. Clean up the parts and snap them together, with the teeth on the latch pointing towards the…
Adjustable Straps (Version 2) for Face shield - A4 binding sheet - easy punching This version is easier to connect and holds together more securely by incorporating a second hole that allows the pegs to snap into place. Print two straps…
This is a fly trap that mounts to a 2-liter pop bottle. The flies go in and cannot find their way out. There is also a fastener to allow you to mount this to a flat surface, for example a 5 gallon bucket. You would just need to drill a 1…
This model is compatible with the lego system.
These are straps meant to be alternatives to the Steam Frame Ergonomic Kit. For instruction on how to install see this video at about the 6 minute mark: Hackstraps and other awesome VR products available on my store:…
Update 2021-05-29: Reduced the stretch to 2mm and removed a bit material where the buckles should snap. Now they fit better :) Update 2021-05-21: Stretched the design by 3mm. Buckles have now more space inside. Mine came out a few times…
These remixes add mounting points to MarkL's excellent pistol grips for the Quest 2 controllers. There are two versions. Version 1: socket mount Version 1 is designed for these 12" elastic cinch straps , and should work with any 1"-wide…
I wanted a low profile adapter to mount a 30mm fan onto a 40mm duct. This model includes traps to hold 4 M3 nuts and clearance for 4 M3 bolts. V2 improves the fitment for nuts/bolts with wider openings but a 2 degree draft angle so that…
You can use this waste bin for convenient stripping of paper, vinyl and other remainders for your tools weeding your plotted designs. The bottom of the lid has three small pockets for (optionally) entering neodym magnets (5*3mm) to fix…
I use it to attach my Leatherman Wave+ holder, but you can attach anything with a strap of up to about 25 mm wide. Shown on a LowePro ProTactic camera backpack. Printed in ABS with supports for the overhangs; organic tree supports come…
Removed the name tag from the case and cut the model in upper and lower part to allow it to be printed in 2 colors.
When installed on the bottom strap of a mask, allows much increased convenience in installation and removal of mask. Print instructions Print with the Clasp standing on it's side to avoid overhang. Print Hook on it's belly for highest…
Tired of tangled Cam straps? This is a spool for keeping Cam straps tidy between uses. Designed for 25mm Cam straps upto 4.5 metres in length. Print instructions I recommend PETG or other more flexible filament than PLA to allow the two…
End caps for a lenovo power adapter with cord wraps Print instructions Printed in Amazon basics PLA with support at 82.5 degree overhangs at 65mm/s
This is the back plate and shoulder straps for making custom royal guards/shadow guards/senate guards from the Force Unleashed game. Included is the back plate and optional straps (hard to tell if the guards have straps or not) to give…
This is a fix for the elastic bands in AKG K701, K702, K712, and AKG K7XX headphones. It's been tested on the K712 Pro and should work for similar models. You'll need an elastic hair tie and glue for installation. If you want to you can…
This is a mount for the 45° filament cutter found here . It fits over any 2020 extrusion and is easily mounted with 2x 8mm M3 screws and T-nuts (I used these ). I've also added a collection drawer to hold the scraps (I'm including 2…
Needed 2 two hole straps to mount the Ikea Koppla power strip to the wall. One strap has a cutout for the plug on the end. I've included the fusion file if you need to modify it at all. I used Esun PLA+ as it was already loaded and it…
A compact yarn gauge to measure wraps per inch (WPI) for knitting or weaving. Has 1in and 1cm sections, so metric weavers aren't excluded :) Printed with filament change for better letters visibility. Letters are cut 0.8mm deep but you…
I had the strap and no anchors. They're $10 USD on amazon, but i have filament now… Onshape Model Print it however you like. On my Ender3, i didnt need supports for PETG, and printed 95 walls. took 11 minutes.
This a remix of a great design by Xuis - I remixed it to be less bulky while providing just the right amount of friction/tension and allow it to be placed on the strap without cutting/removing it. 20 mm version, more coming soon
Hello!! this is my first design ever uploaded, I work as an Additive Manufacturing Engineer and I love to design parts for bikes, cars, and everyday objects, certainly you will see me around more often. Surprisingly I don't own a 3D…
INSTRUCTIONS AND FEATURES HERE: I'm sharing with you my latest 3D printed Covid-19 face shield design! After many iterations, and combining some of the best features of popular face shield designs, I think this offers great protection,…
Have a Yeti Hopper cooler with their 1” strap and loop Hitchpoint Grid and wish you could make it more versatile? Something extra for tailgates, road trips, or a day at the beach? Here’s a start. These designs were made for “hard” TPU,…
I got AI to make a new design for the battery door, allowing straps to be attached. I sized it to perfectly fit the Spigen straps, and when using my other model for loop keys, it works perfectly, and is super comfortable. Without Spigen…
The original model featured a hole for a C7 Type connector (The one with only two pins) on one side. Because mine had an plug of the C5 Type (looks like an cloverleaf) it woudnt fit. I edited it so it fits for my plug. For this remix i…
Hi GNMaker09 I had a look amongst my files and this was all I could find on hand. They dont look that hard to make so if you get stuck, I could probably make some ; ) Will give it a go. Ha would you look at that : ) print the V2 and the…
This is technically less a v2 then just another type of guinea pig wheelchair with 4 wheels instead of 2 for those who need to work up some muscles in the front legs before using the v1 with 2 wheels which moves around much better because…
Cam lock V2 for straps and ropes. Held in place by pressure from the cam. For ~1mm thick straps or ropes. The cam is bi-stable, it will not open when there is no pressure. Does not need supports. Printer does not need to be capable of a…
my door in the fysetc kit have to holes and i want to use them … and i think screws are better than tape :-D unfortunately i saw the fysetc door handle model to late, but i like nut traps even more than heatsinks ;-)
A fast and easy to print holder for yellow sticky traps (Gelbtafeln/Gelbfallen). Prints in 5-7 minutes with < 1g of filament. Place a bunch of them on your printbed and slide your yellow card into the slot. Print instructions Category:…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are some ear savers that…
Inspiration and education credit: 3D Printing Nerd, MakeGood: Thanks @Mojee3D for sharing how to design it on Twitch I wanted to use this concept to make ribbons for my use cases – how will you customize them to use in your projects? I…
These are simple conduit straps for schedule 40 PVC conduit or pipe. Sizes for 2", 1 ½" and 1". Best printed with PETG or ABS. Each file will print 2 straps. Will also work on ABS pipe. Note: For best results when attaching these to the…
Having a mobile workstation, I needed to move the monitor every day. For cable management I designed these simple cable wraps to attach to the 100mm vesa mount behind the monitor. 4 M4 screws of the correct length are required
The small debris which my printer creates was getting out of hand. I normally dyson out my enclosure after a print to clean up the scraps, but thought a small bucket may be a simpler solution. I designed this to stick on the side of the…
Note: this is suuuuper over engineered I used to undo the strap on my bag and put the strap over the bar in the closet to prevent it from getting bent but that got really annoying so I spent way too much time making this silly hook and…
Printed with 0.8 nozzle. Printing with smaller nozzle is ok. These are straps to attach pouches or gear. I needed this to attach molle compatible pouches to my motorycle crash bars. The straps are 25mm wide. The straps resist pulling very…
These Easter egg wraps can be scaled on the X and Y axes to accommodate eggs of different sizes—and can double as cupcake wrappers!! I don't recommend scaling on the Z axis so they maintain their flexibility.
Flexible strap to hold and hang your cables, cords and ropes. Use Ninjaflex (85A) to create these straps. A TPU shore 95 is a little too stiff. If you scale it thinner, about .6 - 1mm, it should work ok. The strap is 208mm long so should…
I wanted a box to hold all of the scraps and wasted filament that comes from my 3d printer. so I made one!
A remix of cbutters' Hack Straps . I find having the adjustment on the outer side of the strap to be more comfortable the inside, so I swapped the L R indicators. I also added curved edges for slightly more comfort and reinforced the top…
Traps for the Trapper class that use 8 mm dice to display the numerical value of a trap. Recommended printing colors: damage traps: red heal traps: blue
Designed and tested by volunteers from SOMD Loves You. A local non-profit organization formed in Southern Maryland, USA. For most up to date version of this design, as well as a full technical data package for other related files and…
A printable chest plate designed for GoPro-style action cameras and 38 mm straps. Tested in PETG (photos included). No supports required. Part of a full chest-mount system I’m releasing piece by piece. Free STL here — engineering STEP…
