Liczymy pasujące modele…
Simple stand for holding 9mm Luger rounds during manual reload. Easily modifiable. Print instructions Easy to print, PLA material is suitable as well. In such case, generate new gcode.
Simple stand for holding .308Win rounds during manual reload. Easily modifiable. Print instructions Infill 15% for 20 rounds, 5% for 50 rounds model.
The is a prototype of a wrench used to tighten/loosen the nut on reloading dies. Fits a 1-1/8" nut. This was designed for Lee reloading presses which have a very tight area to fit the wrench. Now that the prototype works/fits I will…
Simple stand for holding .45 ACP rounds during manual reload. Easily modifiable. Print instructions Default settings will do fine.
Reloading tray for 9mm ammunition created for my friend who's reloading ammunition a lot. He asked me to create this one based on his requirements - with precise holed tolerances and height of every step just enough. This is the last…
Reloading tray for .357 Magnum ammunition created for my friend who's reloading ammunition a lot. He asked me to create this one based on his requirements - with precise holed tolerances and height of every step just enough. This is the…
Wanted to modify another user's design to be more compact and fit my needs. Used for reloading .338 Lapua Magnum Brass
Minimalist reloading tray for holding .45 ACP rounds. Based on the 9mm design I found here https://www.printables.com/model/218307-9mm-reloading-tray-25-count but I simply needed a .45 ACP version so I created this one from scratch. Easy…
Reloading tray for .338 Laupa Magnum. Fits also for smaller caliber.
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Separating trays for reloading brass, pulls out 45, 40, 9mm, and I added the separate 380 version. You want to stack them as they are labeled as follows, from the top down: - 45, 40, 380, 9mm, and base. The trays stack, just pour in the…
This is a remix of a model I got from Thingiverse a long time ago. I can't find the original model anymore, but this has been completely redrawn in Fusion360. The Fusion file is parametric. I've tested it a few different ways and changing…
Summary Brass Prep Station For the gear box plates, recommend a 20% infill and 3-4 perimeters or walls. For the gears (main helical gear and small helical gears), 4 perimeters and 70% infill plus 5 top and bottom layers. For the housing…
Small but handy powder funnel for Luger 9mm and .223 Remmington / 5,56 NATO. Fits resized cases perfectly. Designed to be usable in reloader big hands... ;) Print instructions Category: Tools Print Settings Printer Brand: Prusa Printer:…
If you are, just like me, tired of going through the box of shell holders, looking for the needed number, this is the solution for you! Everything you need in one place, with numbers large enough that you can read them without glasses :-)…
I'm putting together some small batches of loads for testing, so I decided to come up with a few tools to help. I didn't need large 50 or 100 round trays (nor did I want to buy/wait for them), so I decided to draw up my own custom ones.…
This powder pan was designed to work with an AMIR/Brifit digital scale from Amazon. (Linked below) However, there are many other brands of scales that look identical or use the same platten. The bottom measures 33mm in diameter and is…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Updated in 2025. I received a request for a modified version of the powder cup. 20mm tall, dual spouts and no notch. There is a revised version of this cup because after I got around to printing it, I found the overhangs didn't print…
As long as your printer is capable of 1" bridging, you should be able to print this without supports.
not perfect but they hold the shells for hand reloading. i put supports on for the eased edges. takes about 2 hrs to print.
I have an old Herter's reloading tray that I prefer over many of the current commercial product designs . This design is an homage to that Herter's tray which held 60 cases, this design holds 50. Opening is 0.55", in the picture you can…
Lee Breechlock reloading die stands. 3 hole, mainly for rifle calibers, includes space for shellholder. May also work with Hornady Lock-N-Load. Printed in PLA on Bambulab X1C
This mount allows you to mount an Akro Mills Bin to the front bar of the Hornady LNL AP press. Stock Hornady bins are the 30210 models. Bin Mount Sizes Single Double (about 75% support of each bin) Double Longer (100% support of each bin)…
9mm Reloading tray. Holds Qty 50 brass per tray. Print however you desire.
This is a upgrade for the case slider on the Lee 6000 (Six Pack) Progressive Reloading Press. It improved the reliability of grabbing a case and inserting it into the shell holder and prevents/greatly reduces kinking the case feed spring.…
From when i sold 3d prints on request.
I know, another reloading tray? Well after being disappointed with other options for various reasons, I decided to create my own. Others were either too big, non-stacking, or didn't have enough caliber options. These are stackable and…
To prevent spent primers jumping all over the place, you can insert these fillers into the slot of the ram of your RCBS press. Both have the same function, the T-shaped one comes out with the shell holder, the other one can stay in the…
This is a .308 version of my previous 6.5-.284 tray. It should print with no supports, but if your printer has trouble with bridging you can use supports for the handles.
Reloading Trays / Blocks which are efficient! There are some great reloading trays out there. I don't think my design is particularly better in most ways, but they're pretty good at using only a little bit of filament in comparison. These…
After trying out lostprimers diy reloading press, i tweaked it to make it fit metric hardware and to improve sturdiness. i think i have achieved this by adding a M12 rod which clamps the parts in their postion to prevent unwanted…
Case neck and bullet concentricity gauge for reloading (supports for 308 and 223). Kind of based on one of the $300+ aluminum ones I've seen. Uses pretty much any dial micrometer, I used a $25 Wen off Amazon, seems to do well. Hardware is…
A wall mount to hold reloading dies with the shell holder. Available for screw in or Multiboard. The screw-in style uses M4 screws. The Multiboard style uses Dual Snap Connector - Part B. It will hold the die weight on the Mutlboard as is…
Remix of @ken226 's reloading trays. I added letters and numbers for use in load development. These are perfect to keep track of changing loads while looking for the perfect load for your individual 45-70 government.
Redesign of the die box that comes with all Lee loading dies so that you can leave the Hornady LNL bushings on the dies in storage (original Lee box was too small and lid would not snap shut). Should be good for all caliber dies as their…
Shellholder holder for reloading. Holds 5, 7, or 9 shellholders and screws to a wall or bench. I have included the Blender file. Category: Tool Holders & Boxes
Compact and Stackable reloading plates all same size for all of them. Making then fit needly when they are not in use.
Shotgun shotshell reloading trays for 16 gauge, 20 gauge, 28 gauge, and 410 bore. I couldn't find any small bore reloading trays out there so I made some for my reloading hobby. These are useful for reloading to keep the hulls stable and…
300 Blackout Reloading Block / Tray. Use supports for the end handles. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Prusament PLA Grey Notes: Any material does the…
This is a round counter for Dillon 650/750 Reloading press, it could be used to count other metallic items I suppose. Remixed from a round counter for Dillon 1050 reloading press found on the internet a couple of years ago. The counter…
Created by Designmond @des_3526156137
Reloading tray for .357 Magnum and .38 Special. Fits also for smaller caliber.
I modified Lorenzo Gonzalez's lovely Reloading Die Organizer to work better with my pegboard, plus a couple other minor improvements: Changed the hole spacing to 8", to match US/Canada standard peg board (Lorenzo has a version like this…
EDIT 07/20/2025: Added a Chamfer to the holes in the block (Because chamfers are what separate us from the animals) Reloading Block for .223 Rem./5.56x45 NATO rounds. The Block holds 50 shell casings at 0.5" (12.7mm) deep. The holes are…
This is a helpful accessoire when you want to deprime only on your Lee Precision Turret Press. After inserting this piece into the slot, the used primer will be redirected to the back hole. The piece clicks onto the rod and fits snugly…
box patterned after the RCBS, shortened to better fit most standard die sets.
Reloading tray for .308 Winchester. Fits also for smaller caliber.
Unmarked reloading tray, .308 (.473") Casehhead diameter. .49" actual. This is a mod of my .308, .243, 6.5 Creed tray. This version is unmarked, so you can modify for your own use. The MasterChief edition was made for, and at the request…
This is a bullet/brass tray to fit the Hornady Classic reloading press. Print with 4 walls, 2 bottom layers, 3 top layers, 20-25% gyroid infill. With a 0.6mm nozzle you can do 3 walls. Supports are needed touching buildplate only to print…
Update 11/21/2024 308 win has been added to the group. My initial prints have been made out of PLA but PETG also works. Because of the thin sections that label the funnels, I would recommend waiting for the print to cool down before…
9mm reloading tray for holding up to 25 cartridges Dimentions: X = 64.16mm Y = 64.16mm Z = 11.00mm Category: Sport & Outdoors
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
It is a knob for th epowder throw adjustment. My version has a hole for a M3 screw to lock onto the stock nut. The HEX is 10.9mm A/F to suit my Dillon press.
Dimentions X = 129.71mm (5.1 in) Y = 64.85mm (2.6 in) Z = 27.13mm (1.0 in)
.243 Winchester version of my other rifle caliber reloading trays.
I got profoundly sick and tired of the awful O-ring style LEE locknuts that keep migrating. I couldn't be bothered to cough up the money for a bunch of locking ones, so I decided that I might as well learn to use the 3D printer that I…
EDIT 07/20/2025: Added a Chamfer to the holes in the block (Because chamfers are what separate us from the animals) EDIT 07/18/2025: Modified the STL to add embossing on the side and changed debossed text on the top to include NATO…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Small pistol primer press that utilizes Lee shell holders and about $1.50 of hardware. Please utilize the readme for print settings, disclaimer, assembly, and additional info for the plunger. Use PLA pro.
I have a RCBS Rockchucker primarily dedicated for depriming cases. Rather than dropping (and missing) the cases into a box at my feet, this funnel will route the cases to a box. Uses ½" OD plastic tubing with a 5/8" ID. Should handle most…
Die set holders for various models, including 223, 30-30, 30-06, 308, 300 Win Mag, 6.5 Creedmoor, 243, 350 Legend. Holds everything secure. You can turn it upside down and nothing fallls out. Checkout my RCBS Bullet Puller holder as well.…
I remixed the funnel with a bigger hole with about 7mm in diameter. Since I am also reloading more coarse powders like VV N570 that need a whole funnel hole.
When I reload 45-70 I don't usually load more that 20 at a time, so I made this tray versus the commercial trays that hold 50 cases.
As I liked the idea of having labels built into the holders for the pegboard as I am setting it up, as there is only a couple of designs for holding Dies on a pegboard but nothing with labels. This is set up for standard 1" center…
Co-Ax Reloading Press fits Forster and Bonanza presses storage for the tools needed to work on machine also holds a small oil bottle, no supports needed can print at any print height u like, there are also place to put magnets when done…
This was made so I could reuse cheap shotgun shells to make 12 gauge shotgun snap caps. I found some 3D models but nothing that fit. It was designed using Federal Top Gun 2 ¾" shells I printed in ABS and PETG, both with 35% fill and 4…
Easy way to store 25 410 shells after reloading them.
.45 ACP reloading tray. Print however you like. Holds qty 50
My shop has pegboard walls (USA pattern). I wanted to mount my various tool heads for my Dillon 550 bullet reloading press so they would be handy when changing calibers. I found a really nice mount on Thingiverse but it was made to screw…
Dillon 750 and 650 toolhead holder for tool wall. The holder can also store all the parts from the dillon caliber conversion kit. The toolhead holder is made for a tool wall with square holes of 9 mm x 9 mm (0.354") and a pitch of 38 mm…
A remix of @ken226 's reloading trays. I added numbers and letters for ease in load development.
Simple labeled reloading die racks. I wanted something that would allow for easy access, save space on my workbench, and organize/label my dies. STLs for different configurations will be in the file list. Current list of configurations:…
I created this material efficient reloading tray for 100 pistol cases suitable from 9mm up to .40 S&W, as can be seen in the picture. It holds 100 rounds in a staggered 10x10 pattern. The filament needed is less than 45 grams and printing…
A set of Reloading tool holders/blocks that utilize Zach Freedman's Gridfinity system found here - https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Divider%20Bins-60721) The tool blocks include spaces for L.E. Wilson Case…
Original model files here: https://www.printables.com/model/274346-brass-prep-st model 1: additional tool holder to accept 8-32 nuts from aliexpress. Could not source the same one that are required for this build so I modelled a new tool…
Einteiliger Lichtschrankenträger für Birdfeeder
This is my shell sorting tray stack, designed to efficiently sort spent shell casings for brass separation. The trays conveniently stack on top of each other, and you can secure the entire stack with a bungee cord, hooking it from top to…
my Son in law needed a tray added for the bullet abd the cartridge in one
I've got models for 223, 308 (& family), Magnum family (e.g. 300 prc) The baskets need to be printed in vase mode with 0.8mm wall thickness, I've had no problems with PLA or PETG though PETG is probably better, PLA is plenty flexible…
I found myself with tons of loose sleeves of primers. this holder holds 10 sleeves, (1000 primers) and supplies structure if you want to vacuum seal them, so they don't get crushed, I've tried to create this to use as little filament as…
50rd reloading tray for 308 or 6.5 Creedmoor. Other similar calibers with the same case head diameter of .478 will work.
The Fusion build file is enclosed, so you can load that up and change the text if you want to. This is a fairly straight forward print, should not give you any trouble.
Reloading tray for all calibers .223 → Suitable for 243 / 6,5x55 / 308 / 3006 / 9,3x62 etc Steps/stair design, for easier access to the brass casings. Print in desired filament, no support needed.
Reloading Block that holds 50 cases of 223 or 556. PLA is my choice of filament.
This design is better than most commercial solutions as it uses a far more accurate test indicator (each hash mark is 0.0005") and easy to estimate down to 0.0001" vs dial indicators which are really only good to 0.001" and due to their…
Output chute for Dillon reloading presses. Connects to a 1.2x16mm spring - works great with 9mm. I haven't tested with anything larger. I've also added one which uses a 1.6x20mm spring. Best printed with the pointy end up like a pyramid.…
Most reloading trays that come with reloading equipment won't fit 45-70 brass. This is a 25 hole reloading tray that will fit 45-70 brass. I based it off of the original RCBS tray design, which has the two over-hanging “handles” on the…
Reloading tray for .45 revolver and pistol rounds, e.g. 45 Auto, 45 Colt, 45 ACP, 45 HP, 45 Win. Mag, etc.
9mm Reloading Block. Holds 50 cases. Each row is staggered with a honey comb pattern. PLA is what I use. I recommend ironing the top most layer for best aesthetic look.
Simple Remix of the 6.5 Creedmoor Reloading Tray to accommodate 10mm Auto. Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** 200 Infill: 20% **Filament:** […
Slides on behind the ejection pin, the finished round falls off the shell plate and the nose hits the deflector, giving it a push.
An other designe of reloadig tray. I make it for 9mm, 357 an a second for 45 ACP now you ave 44 mag
EDIT 07/20/2025: Increased hole size and added a chamfer to allow better fit across different case manufacturers Reloading Block for 9mm Luger/Parabellum rounds. The Block holds 50 shell casings at 9mm deep. The holes are sized…
Print this in whatever material you like. There will be some bridging, so make sure your printer is capable of it.
Reloading die box with magnets to close. The box is designed in the style of Redding boxes and its the same size as Redding boxes. Fits 3 reloading dies and some accesories. Holes are specifically designed to fit bullet seating stems from…
A collection of various bullet puller collet holders for different brands of collets. These are all older versions of collet holders I sell at azjake.com/shop. They all print without supports and with zero post processing.
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. This holds 4 shell holders, a lee case length…
reloading brass case net, sorter
