277 modeli
These print profiles (or “presets” as the kids are now calling them) make for faster prints, compared to Josef Průša's profiles of similar Z-axis resolution. They can often produce fantastic aesthetics despite their speed, but their focus…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Here is the part that is missing from the MMU2 & MM3 kits. The thing often referred to as "the button" in the manual. The reset button. No more looking for something long and small to press the button with. Its a 4 minute print…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have only printed in PLA so far, but will try PETG. Print settings (CURA) 5 walls Slicing tolerance exclusive 20% infill Assembly is fairly straightforward, the spinner body can hold 2 AA batteries for a counterweight but other heavy…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena jednego wariantu
When I switch my build plate from smooth to textured (or vice versa), I sometimes forget to reset the plate type on the printer. I made this little tag which clips onto the build plate not currently in use, so that when I replace the…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
The reset button on the XIAO-ESP32s3 needs to be pressed many times when developing firmware, but it is small and difficult to press. I created a shield to make it easier to press. I'm using Normal flow head.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Customizable LED Light Diffuser A customizable OpenSCAD model of an LED light diffuser for home routers or other equipment without software brightness control. This is very useful if you have your router in your bedroom or in the living…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The other two eSun Repwinder spacers I found on Printables did not fit my eSun Masterspool, so I created my own. The eSun Masterspool requires a 6mm spacer, while normal eSun spools require a 16mm spacer. This model is parametric, so it…
Wydruk około 0,36 €–0,43 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 5,87 €–7,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The reset button on the XIAO-RP2 needs to be pressed many times when developing firmware, but it is small and difficult to press. I created a shield to make it easier to press. I'm using Normal flow head.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Red reset button for Systemair ventilation system. Original from Systemair kept breaking, so decided to modell a 3D-printable replacement. Printed standing on "clip in edge". PETG 0,4mm nozzle, 0,2mm layer, brim 4mm, organic support on…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi Everyone, I had trouble having a decent print finish with the official bambu lab and generic preset. After dozen of trials and errors, I finally managed to get great results with TPU. I included the 3MF file for bambu studio with all…
Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…
PrusaSlicer filament profiles* for the various lines of filament produced by Polymaker. Because well-tuned material-specific settings outperform generic default settings. * Or ‘presets’ as the kids are now calling them. Observations…
PrusaSlicer profiles made specifically for Sovol SV06 Plus (SV06+) 3D printer, to make the most of its size, speed and accuracy. Version 1.10 update: profile for SV06 (non-Plus) also included - based on Prusa MK3. The profiles are based…
Use 100% infill, mine was printed with Prusament PLA and it can tank shots from a Tokyo Marui GBB pistol with no problems (300ish FPS). You can make it thicker (source file included) or stick something on the front to absorb the impact if…
Remix with increased height, more premade STLs, fixed mesh and better stand without a slope. Use the 3mf file and just scale the Z height of the “Z_wobble_Test_Tower” object in Slicer. Print in an grey-ish filament and not white, since…
https://github.com/DRIgnazGortngschirl/bambulab-studio-orca-slicer-presets Welcome to the Bambu Studio / Orca Slicer Presets repository! This repository is dedicated to storing / collecting presets that have been meticulously crafted and…
Remix (what I changed) I added two slightly different target patterns to each of the targets, as to allow for more precise aiming and a deeper, more refined practice. The pattern has a height of -0.5mm, as to make the pattern easily…
These containers are nice for a fun puzzle geocache, but oftentimes they are just as hard to reset as they are to open. I made this in an attempt to fix that! To open it, you have to normally solve one of these puzzles. It takes about a…
Fire Alarm Call Point Reset Key A fire alarm reset key that is designed to be used on KAC Call Points. Used for testing, resetting and changing the call point operating element Ideal to keep as a spare in case of loss or damage. Printed…
I have been working on this Orca Kobra 2 Max profile for a while. I am running a print as of now so I can't test but wanted to share it. It is as close as I can get to the stock settings with Orca Slicer. Hope you guys like it. I posted…
This is a model for a replacement part for the Festool Domino floating tenon tool that has presets that are more compatible with the common plywood thicknesses. The ½", 5/8" and ¾" nominal plywood thicknesses are actually typically…
This is a tilting style mousetrap with an adjustable magnetic release for a snap action. The counterbalance weight is also adjustable. I designed it to work with pennies, but the two threaded plugs can sandwich any type of mass and allow…
This is a Desktop Skee-Ball Set! This Prints in 3 parts, the top, the alley, and the under-top part (for the ball retriever). You can use any glue to assemble it like superglue or 3d gloop PLA (recommended) Link For 3d Gloop…
This is a solution to store all your Arkham Horror Game Assets. It stores all cards and tokens of the game. It works well with the original Gamegenic card sleeves. The cardbox may be too tight for the older original Fantasy Flight Games…
REMIX CHANGES: I combined the three pieces that constitute the supporting structure/base for the target. The original relied on gravity, and maybe some friction to keep the structure together. This version is stronger and more rigid, but…
UniFi AP Release / Removal and Reset Tool for "unlooking" UniFi Accesspoints Print instructions Category: Hand Tools Summary UniFi AP Release und Reset Tool for "unlooking" UniFi Accesspoints Print Settings Printer Brand: Prusa Printer:…
This is a shooting target device with three targets intended for use with the print-and-play “Elastic Eagle MKI”. This target stand features a reset lever, so you can easily reset your targets with a gentle push! And just like the…
Recreated the Power & Reset buttons for both the round and oval versions of the Sega Saturn (including the Reset extension part found on the round original). Someone requested this one, and was a fun challenge! They've been printed and…
A replacement reset button for the Gamecube. Prints well top down without supports. See Retro Frog's model's for the matching power button. This model has been reinforced a bit from the original in order to better accommodate 3D printing.
Simple holder for computer power and reset buttons that fits into a 16mm hole. Designed for and tested with MODCASE Evolution printable chassis. I printed with Prusa MK4, 0.20mm SPEED, Generic PETG, 15% infill.
J’adore mon MMU2s mais il est des fois capricieux. Je n'ai pas eu de problème avec le MMU3 mais au cas ou, cette impression est compatible avec ! Il faut le réinitialiser, avec une clé ou une tige, on ne voit pas toujours bien, surtout…
The top and bottom piece snap together fairly well, but a couple screws in the mounting holes will make sure it doesn't come apart. The reset button is tapered to be pressed in once and never fall out. The windows to the input ports are…
Edited original to increase size by 150% and increase vertical support thickness after snapping a few arms of the original airsoft version Print 1x Axle, Frame Base and Target. Print 2x Vertical Support 0.2mm layer height 5 wall shell…
I use the silky stuff for shiny décor, and the polycarbonate is my favorite for durable outdoor prints. Instructions Put the .ini files in the directory where you keep your filament profiles (or ‘presets’, as the kids are now calling…
I did not wanted to remove the screw for the electronics mount cover so I made a MMU2S Reset Button that attaches to the USB slot cover, also dubbing as a removable cover for the USB slot.
I got asked if it was possible to make an AES button set which accomodates a LED. I added both a "replica" version, which looks and functions like the original power switch, and one with a 3mm hole in the front center, to house a LED.…
This print houses a single Adafruit QT PY board with USBC connector. The top snaps shut and has two button cutouts to allow you to press the reset / PIN9 button. It has a small slit in the back for cables - I use it to wire in external…
Needed to reset the combination on a master 178 after decoding it and I didn't have the tool. I took measurements of the keyhole and did some guessing based on photos I found online and made this small key that works just like the…
I have one of those clear Retro Game Restore clear NES shells and I thought it would be great to color match the power buttons with my EverDrive N8 Pro. Print with tree supports, “button” side down.
A simple model to cover the controller on a Corne keyboard. I use the Corne HiPro Case by mburrows for my Corne keyboards. I don’t have an OLED though so I’ve been using the MCU cover from the Corne Choc Low Profile Case . Problem is that…
Raspberry Pi 5 and Active Cooler Case, with reset button The objective was to design a sturdy ventilated case that would suit the Pi Active Cooler. The wall thickness chosen in 2.5mm which allows sufficient depth for a recessed panel for…
Recreated the Power & Reset buttons for the SNES Jr. Someone requested this one, and was a fun challenge! They've been printed and tested to fit as close to the originals (see the red painted versions I did)
Void's case, just compatible with Typeractive's wireless 6 column MX Corne PCB layout.
Dual Aux fan and CHT nozzle but you can low the Max Volumetric down
This is a key to reset panic buttons used in burglar/security alarms. It's smaller than the FP2 key used to reset fire alarm devices. The size of the key is scaled from measurements of a manufacturer key. (Example from retailer: Panic…
A 3D printable version of a standard Emergency Door Reset key. I have tested the 2 prong side of the key but not the single prong side. Its abit harder to push in than the factory version but does work.
This is a reset key for a emergency door release lock for factory/office
I had reprinted my LCD holder and knob in white and black and wanted a little more contrast on the reset button. I quick and dirty modeled this little red X to fit in the existing recess and it worked on the first try and I think it looks…
remix of https://www.printables.com/model/268638-sofle-v2-case with bigger hole for reset button
These print profiles* make for strong, gorgeous, seamless, watertight** prints in Spiral Vase Mode . (Non-spiral variants are coming soon.) Not the usual flimsy threads of Josef Průša's spiral print profiles. Notable characteristics of my…
I still believe the one KmanSweden made is the one Prusa should include in the MMU2S kit. This version does not require removing any components, but does the job.
Remix (what I changed) I added a target pattern to each of the targets, as to allow for more precise aiming and a deeper, more refined practice. The pattern has a height of 1mm, as to make the pattern easily visible. Dual Color This model…
Once you squeeze the lever withou the disc, the both cylinder of the hydraulic brake caliper will be closed. You'll need 2 of this tool. steps: 1. slightly loost the screw of the hand shifter's oil tank 2. insert 2 of this tools from both…
This is a remix of https://www.printables.com/model/122969-nut-knob-parametric but with a pre-configured list of bolt sizes from M1.6 through M12 and SAE #8-80 - 1"-8, better surface intersections, chamfers, and a configurable…
Case for Esp8266 Wemos D1 mini USB C with reset button , very easy to print. Please note that when you buy this item it may arrive with slightly different dimensions because the cutting process is not very precise. I myself have had…
A resetter for the mijia thermometer after convert from bluetooth to zigbee With this tool you can easily resett the device and bring in to pairing more Just use a little piece of wire
WARNING: I am not responsable for any damage to your printer, check ALL the settings/configs and verify by yourself before printing, specially with klipper configs Sharing my OrcaSlicer settings for Anycubic Kobra Neo with Klipper…
PC / Mining RIG Power Button / Reset / Buzzer / LED holder panel 5mm LED Use filament 1,75 mm for holding button in place or glue M3 Nut holder in 3 direction PC / Mining RIG Power Button / Reset / Buzzer / LED holder panel 3mm LED…
Small key to reset Fire alarm or panic alarm etc, whatever uses FP2 key. Just be aware key only needs to turn about 5 degrees or so until resistance is felt, don't try to turn fully as this is unnecessary and may snap the key. Print as…
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
This is a tool used to rekey a Kwikset Smartkey lock that you do not have a working key for. It works by depressing the five sliders simultaneously which then allows you to turn the cylinder a quarter turn. You can then use the Kwikset…
So, I've been struggling with my MMU for quite a while. I tried to use the TZB extruder alongside their custom firmware . It made servicing the printer much easier but still didn't solve my issue. That's where this preset comes in. My…
A minimalist box with a fully customizable combination lock . The code is not fixed and can be set and changed easily at any time . The lock wheels have pleasant tactile clicks , making the mechanism satisfying to use. The model is…
I created a new reset button for the Lilygo T-Deck Plus case that's not going to get pressed in your pocket by accident. I printed with PLA, 0.4mm diamondback nozzle. 0.2mm layer height. 0.25mm first layer height, 2 perimeters. I am not…
Remix of Retro Frog's SidecarTridge V3 Shell, with an added button for reset on the top.
My YouTube video: Stock mainboard, stock steppers, almost stock firmware(only changing max temp of the hotend) I've changed every printed part into Polymaker carbon fiber nylon(PA6CF) and added some mod, which is listed down below. Those…
Buttons for heltec. except the reset one is recessed
These printer profiles (or “presets” as the kids are now calling them) are meant for use with a Prusa™ Mini or Mini+ which has a Bondtech™ BMG or Bondtech™ IFS extruder installed. Profiles are included for InputShaper-enhanced printers…
I made an housing for the ESP-Cam. special futures: hole for flash reset button mounting holes M3 hole for GND, 5V adapter for Prusa i3 MK3s Pls adjust the Cam with the hole and press firmly on the back of the ESP-Module. the Cam sits…
***UPDATE 27.04.2026 -Added V2 of the adapter. It will automatically reset your "stop on empty mechanism". Big thanks to "Manamuner", member of the Heavy Recoil Club, who suggested, and tested it for me. ***UPDATE 08.08.2025 -Front Loader…
EN: Two parteted cover for USB-UART converter with reset pin. It is designed for the version from GM electronic eshop - https://www.gme.cz/prevodnik-usb-uart-reset-pin-product-38325 . The material used for manufacturing is TPU because of…
Using this in a retro project and sharing here for those that want it. It'll probably need a bit of editing to work in a real console.
My Cat has repeatedly turn off my computer by jumping on it and staying on the power button for a few moments. My computer case is a Fractal Design Define R6 USB-C (great case by the way!). Therefore, I designed two covers: one for the…
Schnell gedruckter Schlüssel um den Hausalarm zu resetten.
Pop-Its bubbles have a resting position and a non-resting position. It's much more fun to take them from non-resting to resting, but then you always have to go the other way around. Taking them from resting to non-resting is marginally…
A small cover to help prevent children of all ages from accidentally hitting the reset button. Pull off the LCD knob, slip the cover on, and place the knob back on top. Push the cover to the side to intentionally access the reset button.
Pictured model printed in Inland True Green PLA, 0.15mm quality. Friction fit on my Prusa Mini+, but you could tweak the fit by importing “button_mesh” into blender, scaling the fit, and then applying a remesh modifier and exporting as a…
It's bad enough we're having to use this button... might as well save ourselves the effort of finding that hex key yet again to sneak into the hole to press it. --- This is just a quick remix of KmanSweden's MMU2 reset button… but I made…
***UPDATE 13.05.26 Added a new variant, that will automatically reset your STOP ON EMPTY mechanisim, everytime you load a magazine. The Idea was thought up by Manamuner, a member of the Heavy Recoil Club. To honor his contribution this…
Tired of walking back and forth to reset your targets? Meet The Walker — a self-resetting, reactive airsoft target designed for endless shooting practice. Every successful hit flips the target, making it "walk" away from you or along your…
Really love this model. Printed mine in PETG on a core one “vertically” with the face down for a nice textured finish from the build plate at the front of the rack. Added a couple of 12mm holes to the front for power buttons (see pics) I…
I found one already on here but it was askew, so I made my own. You may notice that it is a bit different from the original button, I found that was necessary for a better fit.
The new MaxDuino V2 board has a separate Remote control jack and a Reset switch. Updated my original design with additional cutouts to fit the MaxDuino V2 board. The MaxDuino V1 board has the exact same size, so that board will also fit…
Resettable fuse box. Design your own fuse box with the cutouts in the step file. It is a good tight fit - if you need more clearance then just do an offset in the step files of 0.05mm Printed in abs/asa/petg/pla Updated the step file -…
Handy tool for resetting airsoft 40mm grenades in the field. Has a hole for tying it to gear with paracord.
The LILYGO T-Deck Reset button is very prominent and easy to accidentally initiate resets. This is a replacement button to completely disable or at least make it very hard to initiate a reset. Two versions of the model are attached: Flush…
Seeed ESP32 C6 Case Snap together Tabs to push down for Reset/Bluetooth Antenna port No supports Alternative top and bottoms all fit together.
This is made specifically for New 2DS XL, it does not fit my New 3DS XL and I do not have a 3DS XL to test it on but I assume it will not fit that either. I plan on modifying this one to fit the New 3DS XL at some point in the future. I…
This is my remix of already good model by Lee. Main change is adding button to the dongle. You need small SMD button 4*4*1.5mm, as shown on photos. Just cut two legs from the one side, and solder two other legs direct to RST and GND pins…
I needed a reset button for a screen mount. So I added one and enclude said button. Some of you might need to scale the button vertically only
Preset includes well-tuned parameters for MK3s(&MMU2s) with V6 and Revo hotend, especially I had handwritten specific gcode to reliably print flexible filament with MMU2s. It also includes fast printing profiles, supports Modex PLA,…
Put the .ini files in the directory where you keep your filament profiles (or ‘presets’ as the kids are now calling them). In Linux: ~/.config/PrusaSlicer/filament In Windows: C:\Users\ [name] \AppData\Roaming\PrusaSlicer\filament In…
A cover for the reset button of Artillery printers screen. It works on my Artillery genius, it should also work on a Artillery X1 and X2. Try printing it without any horizontal expansion first, it should work well.
In order to print this from Bambu Slicer, you'll need to manually edit a pair of JSON files (fdm_bbl_3dp_001_common.json and fdm_machine_common.json) to reduce the "extruder_clearance_radius" and "extruder_clearance_max_radius" values On…
Remixed to eliminate the battery and go back to the pogo pins (the wire-version was very fiddly). Also reduced the width to fit better in a cartridge of mine that was a bit tight, bumped up the height of the inner "rails" so that the Nano…
This is a 3D printable trip odometer reset knob for Honda Insight
I printed them in PETG. They break after a while, but so do the original keys. One variant has a callpoint relese for POLON 3800 series.
A reset tool made for network equipment that i designed for my school's IT lab. We attached it to the keys to the network racks, so that you always have the tool handy when working with the equipment, so you don't need to go looking for…
All Spool Solution This board allows you to use filaments from other manufacturers. To use it you will have to mount the adapter on the machine using the two existing bolts, insert your old filament cartridge chip on the provided pen…
