1926 modeli
This is my improved version of the classic Flexi Rex. Somehow this version became the most popular one, maybe just because it doesn't break easily when handled by kids (and adults of course). I uploaded this model to Printables for…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
Flexi Rex with small additional keychain ring. I've printed this one with support below the keychain ring only and made the head lighter by printing with only 10% infill. The rest of the body i've printed with 50% infill for counterweight.
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
No adhesive is required. Friction fit. Suggested print settings: Layer height 0.2mm. Infill 15%. No supports are needed. NOTE Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Flexy Rex but with a ring to war it as a keychain or pendant or to hang wherever you want. This is a remix from the flexiRex DrLex.You can find the file i used for this here: https://www.thingiverse.com/thing:2738211 I made this for my…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
This is a variant on the classic Flexi Rex , with some extra play in the shackles. This gives it extra flexibility, particularly in the sideways direction. The larger slots in the shackles could result in prints of this model being less…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
The story: Wanted to print small case for condoms which could be thrown in a bag and forgotten about without worry that the condoms will get damaged, because you know you should not keep condoms in a wallet. I could not find a single…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
Just a stress test made with Flex Rex published here: https://www.thingiverse.com/make:675136 Printed with MK3S / MMU2S Print instructions Don't use MMU2S stock buffer, nothing between printer and MMU is just fine
Wydruk około 4,80 €–5,87 € nettoWstępna wycena jednego wariantu
This model is free and took a lot of work to create. If you appreciate this model, please leave a download and a like! If you print this model, please post a make. About this model Keep your glasses safe. Guard them with a T-Rex! The neck…
Wydruk około 17,32 €–21,16 € nettoWstępna wycena jednego wariantu
I have designed this box for condoms, tampons and stuff which is almost perfect: https://www.printables.com/cs/model/371842-smooth-pocket-case-for-condoms-durex-tampons-etc The only downside is that you have to trim the corners of condom…
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
This is a small remix of Flexi Rex , adding a loop and the Clip on Holiday Hat . 2-3mm satin ribbon (available at craft/hobby shops) is best for the making loops to attach these to a tree. Wire ties (the type that bind new cables) is OK,…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Hračka pro děti. 3 různé tvary. Třetí model obsahuje pomocný support ale je tam i model bez. Doporučuji suport kvůli spodku sošky a bradě hlavy. Model má malé ruce doporučuji větší velikosti.
Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Deadpool : Wrexham FC Should have given him some cleats. Feel free to accessorize and share.
Wydruk około 7,71 €–9,43 € nettoWstępna wycena jednego wariantu
Precise Slug for Umarex t4e HDR50 This is my design on slug that I have tried on my TR50. Remove support after print is finish like on images! Then simply place the 8mm ball on top and with a little pressure it will click into position.…
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Softair bottles arrives usually in carton boxes, once a few have gone the remaining ones wander around and they are under pressure! this canister keeps them in place, full capacity is 13 but, because I carry also maintenance oil bottles,…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed 3 mounting options of my magazine holder for the Umarex Gauntlet. These mag holders mount to standard picatinny rails. They are two part prints that are held together to the rail by a standard M4 bolt. The hole for the bolt is…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Hello, I have a Metal Gear Solid Rex robot for you. A really cool robot from the game. It's a boss in one level. Very nice detail. Suitable for coloring. Good luck with the printing! I used PLA/PETG as the material. No need to use…
Wydruk około 11,61 €–14,19 € nettoWstępna wycena jednego wariantu
Sad T-rex from the meme made into a finger puppet! The hole is around 17.5 mm, if your finger is smaller/larger, adjust the scale of the model accordingly! Minimal support is needed under the chin. In the provided print file, additional…
Wydruk około 4,24 €–5,19 € nettoWstępna wycena jednego wariantu
Universal Garmin Navi Halter besonders für Etrex 30 und kompatible Modelle. Die Befestigung erfolgt mit einem Velcroband - passt also auf alle Fahrradlenker.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Disclaimer: it's a really minor modification, but this is untested . I haven't put this to use myself (I went straight to a 10mm Z-axis in my upgrade/mod-endeavors). Instead of using two LM8UU bearings in the X-ends, the X-ends have been…
Wydruk około 7,80 €–9,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you need to assemble some Bosch Rexroth profiles, then this is what you need. The premade G-Code, is made so that the bracket is solid PETG, as you want it to be strong i recommend using strong filaments and print them solid, if it is…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
its a remix of flexi rex in love with a key chain loop.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This is a redo of t-rex-skull-double-size with a 0.8 mm nozzle This is 2x the size of the The T-Rex Skull Threaded Openscad Compatible and 240% larger than the original Makerbot. The thread is M24x3 6H This can be printed in 4 parts on…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena jednego wariantu
This has been made for use with common 20T 5mm-bore idlers with the following dimensions: 5mm bore 18mm flange 9mm width (6mm belt) Changes made to the original the parts: Upsized the bore to 5.04mm, same as the E3D-idler design (from…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
Wydruk około 2,24 €–2,73 € nettoWstępna wycena jednego wariantu
Based on the FlexiRex improved, this variant is getting ready for St. Patrick’s Day. In addition to the normal Rex the model also has a Jaunty Hat, some terrible facial hair and is holding a very large beverage. Impressively given the…
Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu
A flattened name plate.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Oops Well, I was browsing the repo after I published this and saw there was already an official reverse bowden setup up there. https://github.com/gregsaun/bear_extruder_and_x_axis/tree/master/optional_parts/reverse_bowden I'm leaving mine…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
Modified the Bear Upgrade 2.1 Extruder (BearExxa) Cover (fs-cover) to fit the original M5 fitting used by Prusa for the MMU2 cover. I bought the fittings here: http://lecktor.com/en/nuts/159-tappex-microbarb-m5-pack-of-10.html Print…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple, fast to print Lightweight front sight for Reximex RP (MITO). (original shroud removed to save weight). Customizable height with changeable inserts. Meant to be fastened by small headless screw M3 x 4. (probably any long enough M3…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple replacement spacer to adjust the belt width in the Umarex HDR50 holster. Fits without glue in a loose friction fit and is high enough to jam against clip when closed. (See pictures) Printable in PLA with no problems. Settings I…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
This cradle holds the Ferrex M7 multitool, a small dremel clone sold by ALDI in Germany. You can extract it from it's holder by either grabbing the tool from the middle, or, if that is easier for you, by pushing down on the spindle in…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Holder for attaching the NAREX Hybro Evo cordless screwdriver to the IEKA Skadis pegboard. Remix of original model by @6d6178 . Print instructions: I decided to use PETG. Supports required, I recommend organic. See the attached 3MF file…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The corner routing template can be used to route a corner of a shelf precisely, there there is an extrusion profile is placed. You can use a router bit with a bearing to trace the shape of the template to the shelf. The drilling guide is…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
Honestly, do whatever you want at this point.
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
G-Code na Flexi Rexe připravený rovnou k tisku
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
We had during summer time a lot off issues because of overheating. So i designed an easy Mounting Fan Housing with 24V DC Fan. Originally that equipment is passivly cooled over Steel Housing. Once printed the cover, I tool a heat gun…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is reduction for drill Narex and Protool. Suitable for stand from antother century :) Narex SU2. Much more better than metalic two original reductions. You can use very simple openscad code for your needs.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print straight up. Set 4 perimeters. No supports needed. Use 2 pieces of M3x10 imbus screws to fix it in position.
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
When our toddler’s playgroup made St. Martin’s lanterns from empty Granini juice bottles using paint and a chestnut inside for swirling colors, I wanted to take it a step further. Our little one asked for a dinosaur lantern, so I designed…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This is a very cool keychain with an overexcited guy jumping! Yay
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Small case for the ladies (pink version) of the Narex Habro electric screwdriver. In the upper layers of both parts, holes are made for inserting magnets: two holes in each part (see picture) for two magnets 28x9 mm (so 8 magnets in…
Wydruk około 3,66 €–4,47 € nettoWstępna wycena jednego wariantu
Many of you liked my Chubby T-rex model so I thought on making a usable model with it. You will be able to organize your pencils and pens, use as a planter, etc. Super easy print with no supports needed at all. If you like my model check…
MakerBot's T-Rex Skeleton is a masterpiece. Too bad MakerBot has ignored fans' long-time cry to fix some obvious and critical issues. Thus I made the following fixes to make the model printable: --I fixed tail parts A and B. Tail part A…
Rexo is the ultimate chibi dino pal—big smile, chunky tail, and all the charm of a prehistoric plushie. Whether you're looking for a quick print or a colorful desk mascot, Rexo has a version for every print mood!
For commercial licence and access to all my models: Patreon (https://www.patreon.com/RembStudios) Flexi T-Rex Dinosaur! A beautifully articulated model that brings a Trex to life with fully movable parts without any support. This detailed…
E3NG / Ender 3 NG version 1.2 !CAUTION! Reprint and replace the electronics_DIN_rail_PSU_24V.stl from the bacpack + electronics folder if you already have the older version. The old design can in extreme cases cause the mounting screws…
There is a new and improved 2026 version available here , or included for my club members . Yes, I know it's blasphemy as we already have the awesome mother of all flexi dinosaurs, the original Flexi Rex from DrLex . But in order to…
*Update. Watermarked the Skull photos to annoy lazy Etsy scammers. *Update. Added the stand and support rod from the original file I remixed. Adjusted the mesh to replace the clipped portions of the original. This is most evident on the…
Flexi Rex is ready for Valentine's Day! This heart hugging dino is perfect for classroom Valentine's Day and Friendship Parties. This version requires NO SUPPORTS as the puffy heart touches the build plate just enough. Attribution: This…
NEW VERSION - ENDER 3 NG v1.2 has been released! Changelog now at the end of the page EDIT 23.01.2024 - Added “Test parts” folder that contains improved files that I have been testing while working on the next release version - these are…
Here comes Rexa, the sweetest little dino from a long-forgotten land of fluff and fun! With a round belly, soft curves and sleepy eyes, Rexa isn’t here to roar… just to melt hearts. Prints in only 27 minutes with minimal supports—perfect…
An articulated dinosaur skeleton with a removable skull. A T-rex, Ceratosaurus and Allosaurus style skulls are included. Easy to print and should not need supports. Print with 2 or 3 walls @.16 layer height.
Print with supports 0.2mm height Looks better in Red or do multicolor with only the Heart beeing red :-)
Never go offline in style! This Chrome T-Rex bead is the perfect little detail to customize your hoodie. Fun, nostalgic, and easy to print! 🦖 If you enjoy my creations and would like to support my work, a coffee is always appreciated! ❤…
T-Rex Decor Figurine Watch out for the teeth when removing supports. Feel free to scale it as desired. Printed with Fuzzy Skin effect. Fuzzy Skin: All walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 Happy printing! All my…
As the already existing keychain models just offer a quite small eyelet for the keyring, I remixed the model from DrLex with a quite robust and thick ring at the tail of the dino.…
This is a 3D model of an Arduino clone of the Mega 2560 microcontroller board. I needed one for an enclosure design, but couldn't find one that had precise dimensions for the mounting holes. Despite no officially-diagnosed OCD, my brain…
Say hello to this fierce little friend—T-Rex is here to stomp straight into your collection! With its chunky legs, stubby tail, and massive head full of charm, this dino is a must-have for fans of quick and cute prints. ✔ No supports…
The Aim of this project was to build a converter kit for my V2 model into a Core YX printer and by reusing as many original parts of Ender 3 v2 as possible. The second goal of this build was to keep the possibility of converting back the…
Found this 2014 model by Makerbot Tips: I have custom painted the organic (tree) supports on the slice I'm including. I found them to be the most efficient placing and effective supporting. Be careful and patient when removing them. I…
Découvrez le remix du Puzzle 3Dino de STAG_B : T-Rex en version kit card ! Imprimez ce modèle en 3D pour créer votre propre puzzle 3Dino T-Rex inspiré du célèbre dinosaure T-Rex. Cette version kit card ajoute une touche d'originalité et…
Join here to get access: https://www.patreon.com/kogi3d Material PLA Layer height ≤0,2 mm Infill >15% Support None, but if you have issue use a brim of 3-5mm, this will help with the head piece. Orientation Default, laid flat on the belly…
I made this to sell at my business. It's made to fit these keychain pieces https://www.amazon.com/dp/B08RHKRMWF?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 You can sell it too!!! I sell mine for $3.00 and they sell pretty well.
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
Check out my Amazon Page to see what kind of gear I use to make these models! VIDEO: https://www.youtube.com/watch?v=AbloujEFAmI A two-color version of the Flexi Rex designed for dual extruder (or dual extrusion) printers! Just load the…
I really like dinosaurs, and one of my favorite models to 3D print is https://www.printables.com/it/model/46241-flexi-rex-with-stronger-links . I decided to remix this file by adding the hatched egg with the baby T-Rex. Perfect to give as…
Remix of MakerBot's T-Rex skull on Thingiverse. I remixed the stand, found below. I recommend you use PETG for the stand as PLA will eventually bend from the weight of the skull.
Cute little T rex, flexi and with a heart!
Remix for multi-material printers. Original model by Alsamen: https://www.thingiverse.com/thing:3835952
The recommended print settings are: 0.2 mm layer height 3 perimeters (important, to make the links strong) 15% infill Solid infill threshold 8mm² Expect about 2 to 2.5 hours print time for a good quality print. Don't use a high infill…
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Hey everyone! 🦖✨ I'm super excited to share my newest Fluffy Tails design with you all…
Remix of Captain Rex's Helmet Phase 2 (Star Wars) by Killonious : https://www.thingiverse.com/thing:2446611 Oh and don't forget the detail pieces You also need the file for the rangefinder: Captain Rex RangeFinder Articulate by camusic:…
I downloaded it from 3dvia.com. The model is so fit for 3D printing. It only needed scaling. And here is the original file's url: http://www.3dvia.com/models/A260C598AABC8EA0/tex-rex Category: Animals
I present a remix of a popular dino keychain prepared by my 9-year-old daughter, I am very proud of her. The dinos are 75% scale compared to the original. Despite this, the mobility has been preserved. Additionally, the right one is…
I wanted a flexi rex skeleton but I couldn’t find one already made, so I made this. Began modelling by altering the original STL file but found it easier to start again, so re-made it from scratch. It printed successfully without supports…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This is the dino from the offline google dino game, but 3D! I made it in tinkercad, but added a bit of bevel in blender since it cut me multiple times and even awarded me with an infected wound. Most recent update here: I added a cactus!…
Description 🔒 This model is protected by copyright. If you want to use or sell physical prints, please check the paid subscription here: 👉 https://www.patreon.com/cw/Nieuchronny 📝 Description A cute mini T-Rex in an adorable style 🦖✨…
Work in progress. Be warned, this model may contain some dimensional inaccuracy. This model is meant to be used as an asset in CAD software. I don't recommend to print this model as it is. It's not optimized for FDM printing. Creality K1…
Based on the vintage wooden kits from my youth, I decided to make one that could be 3D printed.
🦖 Cute T‑Rex Robbie – CARTOON EDITION (noAMS) This charming little T‑Rex named Robbie, with its big cartoon eyes, rounded shapes, and friendly expression, is perfect as a desk decoration, a gift for dinosaur lovers, or a playful accessory…
Trex head, wall mounted optional, using this bracket: https://www.printables.com/model/166107-bracket-for-wall-mountings/
I printed this T-Rex head with support for the back of the jaw and the upper teeth. The model printed fine for me without support going all the way up to the chin. For similar models see my Collection of Animal Heads/Busts that I have…
Available also on Makerworld: click 3D Flexi Rex Keychain Model - Fun Meets Prehistory on Your Keychain! Liven up your keys or backpack with the fun and functional 3D Flexi Rex Keychain Model! This adorable dinosaur brings a touch of…
This is a Tyrannosaurus Rex Skull model ,I hope you guys like it, Thank you
Recommended print settings: Material: PLA Layer height: 0.2mm Nozzle: 0.4mm Infill: 5% Gyroic Perimeters: 3 Solid layers top: 5 Solid layers bottom: 5
Hello E3V2 CoreXY fellow, I’m introducing the 2nd generation of Ender 3 V2 CoreXY conversion kit series, which is now available in a bigger frame and has two Z axis variations (TripleZ or Belt drive). Now the printer has a bigger frame…
Tyrannosaurus Rex recreation from Makerbot. Ribs should be printed 2 at a time for best results. I glued them since resolution at the connection is mediocre.
If you want to support me so I can keep making even more fun, cute, and crazy designs for you guys, you can join my Patreon ✨ 👉 patreon.com/draftaxis Meet my grumpy little knitted T-Rex 🧶🦖 — he’s tiny, sassy, and way cuter than he thinks…
Please note that the license for this print is for the layer-change G-code only. The Roses of Unicofil flower used as an example remains “Attribution-NoDerivatives” and is itself unmodified in this print. By dynamically adjusting the…
Adorable and chubby T-rex figure. Super easy print with no supports, it has been tested and prints great. Great gift for any kid or adult dinosaur lovers! If there is interest I will be making more dinosaurs in this style :) please upload…
T-Rex skull as a simple shelf decoration easy to print with tree supports.
the indominus rex is the main villain from jurassic world and it is a hybrid
Yet another Roblox fruit model my son begged me to create. Rotate and print on it's base (horns printing up). I printed with no supports and with the top part laid flat in the same build as the base (see the gcode).
![[REMIX] Flexi-Rex or Flexi-Dragon?](https://media.printables.com/media/prints/582985/images/4652585_91212d20-b596-47f6-939e-7f6372cb61ff/img-1.jpg)
