926 modeli
When I discovered snacking tongs on printables, I really liked the idea and immediatly downloaded and printed one. They served their purpose, but they just felt wrong between my fingers. They were too bulky, heavy and they used a lot of…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, this is a tiny but functional bistable compliant robot gripper. It's some kind of simplified version of my other Keychain Gripper . It's great for fidgeting or tinkering around with bistable mechanisms. In its initial position the…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
Features… Aerated handle with grip bumps for comfort, lightness, ease of handling and no-slip. Subtle, yet effective 3° bend at end of sticks for a solid grip on those snacks. Teeth at the very tip perfectly come together for picking up…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Hi, this is a prototype of a bistable compliant robot gripper. Each side can be actuated individually by sliding the actuator in the centre. It is still in an early stage and will change in future versions. Its dimensions are approx: 42 x…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
WAGO Compact Wire Stripper for 221 Connectors Description This Compact Wire Stripper for WAGO 221 Connectors is a practical and space-saving tool designed to strip wires to the perfect length for both 4mm² and 6mm² WAGO connectors. It…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Also Check out https://www.printables.com/model/1043084-gobilda-ftc-battery-mount-no-numbername For all Tetrix style batteries Print with supports and scale to 100.1 % With its lightweight construction and optimized grip strength, this…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Push-ups / Handstand gripper
Wydruk około 9,15 €–11,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We have a Leifheit telescope handle (Nr 41523, 135 - 400 cm) that we use to clean high windows. Also it can be useful for positioning something high up. For that I already created a universal hook…
Wydruk około 2,76 €–3,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
to save space i wnatet to hang my Heewing F-01 to the wall. But i could not find a wallmount here, so i designed one myself. Easy to mount with 2 screws and holds the wing securely. Print Settings Printer Brand: Prusa Printer: i3 MK2S…
Wydruk około 6,75 €–8,25 € nettoWstępna wycena jednego wariantu
I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Assembly: Just put the Blade in from the side und close it with the plug. Alternatively you mount it with a M3 srew. Be sure to cut the insulation with a rotary movement. Then it can be effortlessly stripped. Printsettings: Material: PLA…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
You may custom its size as you need.
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
No more wasted dish washing liquid! 👍💰 Print instructions: Material: PETG Layer: 0,15 mm Perimeters: 2 Infill: 25% Supports: No Brim: Optionally This model requires some special settings, more details in the attached 3MF file. Custom…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple skadis mount for holding a Stripmaster wire stripping tool. The Skadis hooks will require supports. I used painted on supports for the overhanging bits with support enforcers only.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enhance the versatility of your Portable Zyliss All-Purpose Vise with these 3D printable rotating grippers! Designed to hold pipes, dowels, and circular objects securely, as well as position square pieces of wood diagonally, these jaws…
Wydruk około 3,78 €–4,61 € nettoWstępna wycena jednego wariantu
Printing time +- 4 hours Layer height: 0,25mm I printed every piece separately and every time I added 3DLAC for safety. The inner part doesn't need any supports or anything else. For the outer part I added 5 mm brim (0,2 mm offset) and…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Ayce wirestripper holder for ikea skadis Ayce abisolierzange halter für ikea skadis Print with support
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
The Ripper mask, an iconic piece of chaos from Borderlands 4 , is now available for 3D printing. We've designed it with handy attachment points for straps, making it easy to create and wear. AVAILABLE NOW! Get your copy of Borderlands 4…
This is my approach for a mostly 3D-printed Wire Stripper — a functional and robust tool designed to strip wires cleanly and consistently. I wanted to create something that anyone can use, whether you’re a maker, hobbyist, or handling…
The gripper beaks can take the shape of the object they hold, like in this case an orange! Printing it is pretty self explanatory, or watch the short: https://youtube.com/shorts/1ziQGQiweF8?feature=share edit: Just to clarify this is not…
Blade Scraper Print the Blade Scraper without top and bottom infill for such a beautiful design (honeycomb infill). You need to print the white ring 2x and insert it from each side into the hole. Additionally, you will need a utility…
Object description: This wire stripper is as the title says, a tool which cuts in the outer insulation of a cable that you can easily peel it off. I made the experience that a lot of professional tools work with a spring mechanism and cut…
Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8 Find more Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Nipper Holder:…
This is a fully functional bistable compliant robot gripper for your keychain. In its initial position the gripper is closed, when you push the switch in the middle upwards it snaps into its new position. This opens the gripper. The…
Simple, space efficient storage solution for small pliers/nippers/cutters/strippers used in electronics. Two standard bins in the files, one fits up to 6 pliers with a grip thickness of up to 11.5mm (the right one in the photos) and…
For the Multiboard Storage System. The cutters fit standard filament cutters (Creality) or pointy nose pliers. The wire strippers fit the ones in the picture. It may or may not fit a different brand.
PPW Mk1 Self-Adjusting Gripper Plywood/Panel Carrier Clamp Effortless Panel Transport: Experience unmatched convenience with the PPW Mk1 Gripper Clamp, designed to streamline your workflow and make panel carrying a breeze. Its innovative…
Printing All parts are printable without supports. Assembly
Robot servo motor gripper
Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…
Vague for the next week im leaving for the outback in a few hrs. Requires a 65mm length .3mm thick brass strip 12mm wide and a way to drill a 3mm hole in it. Build Guide WIP sorry, but at least its here this time! Im back the 25th at the…
this a remix of wire stripper. the extrra blade holder is added to keep the blade in place. Category: Hand Tools
Print with PETG or ASA. 4-5 walls minimum - high infill recommended (especially for “Beam”) Hardware: 4x M3 hex socket screws (M3*14) 4x M3 nuts "Top" and "Handle" require supports on the inside. There is a 1mm clearance on there so left…
it is a golf ball holder that looks like a nutsack when you put balls in it
Wire Stripper (Cutter Blade) With just only 1 cutter blade, you can use 2 times in the Wire Stripper (Take a look on the pictures to see how you split the blade). You will need: 2x M4 5mm screw 2x M4 7mm nut Category: Hand Tools
This is the Pusi Negotiator . An unofficially designed negotiator for wave filters to be used on the xBloom Studio Omni Dripper 2. Brewing note: I recommend either this recipe designed by @pradyboy for Moodtrap beans, for use with this…
Servo Controlled Robotic Gripper using rack & pinion drive for parallel jaw movement https://youtu.be/Qfd0ikdnAsg This is a robotic gripper/jaw that uses a low-cost Tower Pro MG996R servo. As opposed to some grippers that use a lever…
3D printed powerful gripper mainly designed as a cheap tool for UR3e robot, however, because of the simple mounting system - you can adapt it to any robot. Printing instructions: The project can be printed with any material you like, just…
This is a Multiboard hanger for the Vise Grip automatic wire strippers, inspired by “HSW Vise Grip Wire Stripper Hanger” from Tom Nardi.
This is a hanger for the Vise Grip automatic wire strippers, inspired by “Wire Stripper Holder for Hexagon Storage Wall (HSW)” from Phobos. While that design did work, the hanger was a bit too small, and I didn't like how the strippers…
Slightly modified version of V60 coffee dripper that doesn't need supports (I changed the handle and the bottom part with smaller overhangs and separated rim), you just slide the rim on the body and eventually put glue to the joint if…
This is a remix of a model which I cannot find anymore ! I've simply reinforced the stripper clip stopper since it seemed to break off when printed from PLA, and also added some hex patterning to the sides to provide some style points as…
ragRipper tool for easy cutting and tearing up of old clothes into workshop rags. Easily replaceable utility ‘stanley knife’ blade. Can be flipped 180degress to change the cutting edge too. Designed to be assembled with M3 melt-in brass…
This compact gripper has pivoting fingertips that conform to the object being gripped. Unlike parallelogram grippers, this provides a more secure grasp on irregular surfaces. And rather than using fixed pivots, each finger is actually a…
A general-purpose easy-access tool rack built on the Gridfinity system. Intended to be a tool rack that fits most basic hand tools and prioritizes ease of access. Most side cutters will hold themselves by the handle, saving the tips. Most…
Welcome to the assembly Steps and thanks for your interest! I’m happy to announce that the assembly instructions are finally here. The assembly guide ''videos'' are ready, and you can now assemble your Wire Stripper Pro (…
Easy assembly with 3mm screws UPDATE: I added the missing T coupler part and the grip strips (the red parts) which I printed in Fiberlogy Fiberflex 30D so they are soft and provide enough friction.
The Tideripper is one of the most iconic machines of the forbidden west. While truly at home in the oceans, this machine is surprisingly agile on land. Really more than it should be. In any case, this sea monster is one of the biggest…
Summary These Compliant Grippers were created to further technological refinement in Minimally Invasive Surgery(MIS), offering the advantages of reduced wear, assembly, and recovery time. An example of a simplified compliant mechanism…
Needs to be printed with an M3 insert from the original project. Holds a standard wire stripper/cutter. Most generic designs of this tool on Amazon seem to have the same dimensions (they're probably all made in the same place), so…
Holds a wire stripper, the pictured wire stripper is 48mm at it's widest. 2 versions; with or without text.
Hello, this is a fully functioning soft robotic gripper. You can use it on its own or print the exoskeleton around it. You can use the exoskeleton to mount it to a robot. It has the dimensions of approx. 200 mm in diameter and 17 mm in…
A must have tool for every balsa model builder. This tool helps you cut balsa strips with precise width everytime with square cuts everytime. Specifically designed for #11 surgical scalpel blade. Ergonimical design for ease of use while…
Just made this simple guide for stripping wires and cables for scrapping copper. It needs to be bolted down with 5mm screws, then you just use the hole above to guide the razor blade and pull the wire through. Small model is for 3, 4, 5,…
Hello this is a bistable robot gripper. It was one of the first 3d printing projects I startet after I bought my 3d printer. When the gripper is not activated, it is always open. When actuated, it closes and remains closed until it is…
I only have two stamped sheet metal stripper clips for my 98k and I wanted a few more (without breaking the bank), so I did some tests… this is the 8th iteration so far and it works reasonably well. I closed off one end to stop the rounds…
This is Gripper Assembly from my "Low cost robotic arm project" you can check the project video here : https://youtu.be/2-MNlDSzeL4 Category: Robotics
USS Dripper – Universal Liquid Transfer Funnel No space for waste. The USS Dripper is a two-part funnel designed to make transferring the last remains of thick fluids (like laundry detergent) from one bottle to another easy, clean, and…
This is a remix of my Rov Manipulator (Parallel Gripper) modified to fit the EEZYbotARM MK2 robotic arm and be controlled by a servo instead of a rotating shaft. Use a SG90 Servo Hardware required (See pictures for screw layout.) All…
A 5x3 gridfinity tray (3 units deep) extruded to fit a very popular wire stripper / crimper / cutter model sold under many different brands with minimal variations. This model, and other very very similar ones, are sold under several…
Normally after you catch a fish, you hold it up by the lower lip while you remove the hook and pose for pictures of your big catch. When you're out fishing for predatory fish, like big ocean fish, you need to wear gloves or use a tool…
I am looking to grow my new channels! Give me a follow on youtube and mastadon and please feel free to say hello :) https://www.youtube.com/@homegrown3dprint https://mastodon.social/@homegrown3d Changelog: 3/14/22 refined eye cover area a…
Just a small remix of wire stripper based on classical design https://www.thingiverse.com/thing:2468753
This 2x2X6U Tool Holder will hold four pairs of small pliers for electronics and/or jewelry making, and two pairs of Wire Strippers.
Gripper lamp based on a toy gripper like you see at fair grounds. (The final model is slightly different from the photo.) You also need: Bulb E27 95mm LED. E27 fitting. (38mmø) Screws M4x10. M3x10 for thumb screws (knobs). Thread rod M3…
The Mark VI Fin Gripper - Black Ram Hand. This hand was designed to use the The Fin Ray Effect giving the wearer the ability to pick up soft or odd shaped items not able to be grasped by rigid claws or fingers. This can allow you to pick…
This part uses an existing Microjig Grr-ipper and hardware to bolt on an additional bit of security. The part can slide up and out of the way, or slide down and grab the back edge of the board. If you keep the bolt loose, it can use…
This is the version 2 which utilize all of your feedback together. While it is not recommended to print in 1 piece as the layer adhesion will reduce part strength and make it easy to break. Two part are separated as the original version…
12/26/2025 Added V3 3 layer wall version after noticing that certain fillaments would break at the 2 layer transition point. Tolerances are tight! If it does not fit on the first try, scale up 1%. Material: PLA or PETG Layer Height: 0.2mm…
This is my remixed version of Zack Freedman's gridifinity stripper holder rack which allows you to store pliers on the edge while closing a drawer, depends on your pliers size (tested on ikéa alex). 3 versions of this rack : 1x3u = 120 mm…
mine oryginal rubber grips fall apart so i design better one Please, share your print in the comments. Thank you!
Printed holder for origami dripper. Similar dimensions to the original transparent holder, it fits for sure for glass servers from Hario. You have to turn the model over and you can print without supports. I printed on Anet A8.
Overview This model consists of a two-axis robot arm and a dual-jawed gripper allowing the XRP Robot to effectively manipulate objects. With this arm design, students leveraging the XRP robot platform can advance their programming…
Description Stripper clip holds 10 rounds of 5.56/223rem or any other similar cartridge Intended for clip loader located here Print instructions No rafts No supports 0.20mm quality 15% Infill PLA + or better Thank you and happy printing!
A vertical wall mount for the MICROJIG GRR-GRIPPER 3d push block.
Your workshop's new secret weapon for perfectly snug corners. This little marvel transforms any plywood or wood project from ‘meh’ to masterpiece with ease. Designed to caress plywood or wood into submission, achieving that dreamy…
This is my print in place PCB-Holder, See it in action, and get all the info here: https://youtu.be/jN2l7cCoVB4 There is a GoPro-Mounted version, and a Stand version. (stand version has 70deg overhang, but it is printable with a standard…
I tried a few of these holders but none of them quite fit, either my pair of strippers or the Skadis pegboard. printing advice. I recommend at least 4 walls, infill doesn't matter as much (I did 20% gyroid). I printed it standing upright…
I recently built a thin-strip cutting jig for my table saw, but it needed some kind of handle to safely guide it through the end of the cut. I own several Grr-Rippers and LOVE the comfort and safety they provide. I figured the handle…
.200 mm, no supports New FDM bed adhesive: https://design-and-additive-manufacturing-services.square.site/product/p2b-weld/5?sbp=false Print instructions Category: Kitchen & Dining Print Settings Printer Brand: Prusa Printer: I3 MK3S…
I had a lot of old cables that I wanted to recycle at a scrapyard. To achieve a better rice, I freed all the cables on the sheath to get the bare copper. Unfortunately, the cheap cable strippers from the well-known online portals do not…
This is a small Parallel Gripper that is used for a (Remote Operated Vehicle) ROV Manipulator. This is designed to fit a manipulator arm made from 1/2 PVC Pipe and activated with a geared motor spinning the shaft. These were designed to…
This model was part of the #games2life project this year at ERRF2023. The model was printed by @gears3d and painted to match the game. Picture is of Gears print and added to this. Please go give @gears3d all the support for the great art…
You Need These Parts: 1xStanley Blade 2xM3 Screw 2xM3 Nut Blade Measurement: Added 2 M3 Screw support Optimized for ease of grip I recommend to print it with 0.12mm layer height I remix this model but i cannot find the original model…
Ripper for the Huina 1550 / 550 Excavator Needs (3x) M2x8 screws for the pads OR use it without pads for easier ripping in hard ground V2 corrects a clearance issue with my Spring Coupler ( https://www.thingiverse.com/thing:3732951 )…
This is dripper I designed for my hydroponics system. I use it with 10 cm (4 inch) rockwool cubes. External diameter is 7 cm. Printed in two parts: dripper and hose connector. Hose connector has to be glued to dripper. Holes has to be…
Heyho For the MakerFaire in Hannover I did need some tools for the visitors to thest the laparoscopic trainer. https://www.printables.com/model/864261-laparoscopic-trainer-for-students-and-surgeons-col Sadly the tools my friend Allen Mehr…
Purpose built hook for hanging the Irwin VISE-GRIP Wire Stripper from the Honeycomb Wall Storage grid .
Fully printed, no assembly, print-in-place fin ray grippers, printed with plain PETG, no TPU flexible filament needed. The connectors are compatible with fischertechnik. The grippers' angle is 16°, so that you can use two Winkelsteine 7.5…
In my case I was trying to remove the thick clear insulation around the wires that I am reusing from some strippped direct burial 14 AWG wire. Adjust Wire_Diameter & RazorBlade_Thickness to match whatever your trying to strip and the type…
Small dripper or sprinkler (depending on the pressure in tube) for Gardena micro-drip systems. Print Settings Printer: Alfawise U20 Rafts: No Supports: No Resolution: 0.1 Category: Outdoor & Garden
This is a Remix from this model by lhomem : https://www.thingiverse.com/thing:4676186 And It uses these universal hooks from CSD_Salzburg : https://www.thingiverse.com/thing:2853257 It now fit flat to the board and I find it is a more…
I've included a couple of variations of the herb stripper, which can be printed with no design; an embossed design; or as a multi-colour print.
I searched for a quick-release filament gripper/clipper that would meet my needs, but I could not find one I liked, so I created a versatile three-way clip. I did not like how an unused filament held on the spool guide of my MK4, as it…
Holds CHP wire strippers on a standard 1 inch pegboard grid. Printing Instructions Print in downloaded orientation. Use supports from bed to support pegs.
This adjustable 3-jaw gripper is a versatile tool for grasping various shapes and sizes, making it ideal for robotic projects or as a standalone demonstration model . It uses a unique triple-threaded mechanism with three threads spaced…
It needs of 5 self-tapping screws to insert in the little holes above, in such a way that the tip of the screw protrude of a bit to cut the cable. So insert the cable to one side of the cable stripper on one of the dimensioned holes and…
Skadis mount for Irwin wirestrippers using universal hook system How to use: Open the .3mf file in prusaslicer (import geometry only) then slice to gcode. notes This model uses negative spacers which cannot be exported to stl as of…
Yet another tarp clip. I derived basic dimensions from @ICanMakingThings design & made a rounder filleted design. Less sharp corners to reduce wear on the tarp. Print instructions Category: Household Print Settings Printer Brand: Prusa…
