Wall art: Deep roots under the rising Sun
At first print with transparent yellow filament, then switch on some black just like on my picture.
- Pobrania
- 68
- Polubienia
- 18
- Ocena
- 5
60 modeli
At first print with transparent yellow filament, then switch on some black just like on my picture.
wall art: a tree You may use it as stencil too.
Colours: the first: transparent light blue the second: transparent yellow or orange the third: light green the last: black or: the first: transparent yellow the second: transparent red or orange the third: dark green the last: black
You need 4 bearings 12x6,5x3,5 und 6 M2 screws. Can Pump water when driven by a motor or a drill. Was printed in PLA on a Flsun delta printer.
Great for making shrimp hide from plant roots or rooting plants (aquarium water is a great growth booster).
These are specifically sized to fit IKEA's succulent plants, but they should be very easily resized in either a slicer or 3D application. Modeled procedurally using Houdini, they're inspired by plant roots and poison ivy. I have modeled…
Photogrammetry scan of the large ficus tree in Plaça del Mercat in Palma de Mallorca. Detailed model, can be used for scenery in tabletop games. Use your creativity. The model prints easily and without support and is pretty detailed.
Bonsai Tree Deep Roots Wall Art Scale and print as desired!
Root joints kept falling out for my prints. This remix integrates the roots into the body as one piece.
when I printed this model in PLA, I was unable to install the charging puck without breaking the top plate apart. this modified top allows for easier installation of the charging cable without stressing the part. slide the disk in from…
I cut the dragonfly body in two parts. Now I printed the wing roots in clear PETG like the wings, and the body in 3 colored PLA. I geot the looks of the PLA and the funktion of the PETG for the wings. printed with 0,15 mm layer and 0,4 mm…
🎃 Spooky Pumpkin with Creepy Roots 🌱💀 This Halloween pumpkin stands out with its twisted roots, making it look like it crawled straight out of the ground. Its menacing face and organic base make it a perfect spooky centerpiece for your…
###### NOTE: This thing is in development. Some users already mentioned some problems most propably related to the gears. They cause some possible missalignment of the rotors and thus problems after short time of operation. A possible…
Bring your woodland battlefields and forest dioramas to life with this highly detailed hollow tree stump terrain piece. Featuring deeply textured bark, exposed roots, creeping vines, and clusters of mushrooms, this sculpt captures the…
This forest spirit figure presents a calm, upright character seamlessly integrated with natural elements. The sculpt features a slender humanoid form transitioning into twisting roots that spread across the base, creating a grounded and…
DESCRIPTION WIP - MORE COMING SOON UPDATE (10/08/26): The horn and top rotator tube have been updated. It's recommended that you reprint them. The horn is now thinner and a bit more accurate. I originally thought the end of the horn…
An update on my singular bases I’ve decided to stop with these singular base uploads. They are getting so numerous it’s getting cluttered, it's difficult to find the one you want, and the uploading takes ages so I can’t do as many as I…
The Kakapo's Orchid Planter for Oversized Orchids The planter was born as a solution to save our dying orchid. It needed space and the old plant pot wasn't going to fit it. This 6-inch beast is not only satisfactory for the orchid but is…
A unique planter pot designed in the shape of a classic Volkswagen vehicle, featuring intricate detailing that mimics the iconic curves and design elements of a vintage VW bus or Beetle. This whimsical, functional planter is perfect for…
A gift for my sister, inspired from one of her songs. My longest 3D project so far. Designed entirely on Cinema 4D with several PLA prototypes before going to casting-wax on a resin printer. Waste mould casting has been made by an…
A clean, modern self-watering base designed for small pots and planters. The raised center columns elevate your pot, allowing excess water to drain while preventing roots from sitting in stagnant water. It’s perfect for houseplants that…
For air to be delivered through a tube to a 3D printer nozzle needs more pressure than available from an axial or centrifugal fan, but not as much as would be delivered by a piston or diaphragm pump. This simple Roots blower design works…
This enigmatic raven witch stands poised upon a suspended branch, her hood casting shadow over a faceless presence. Two ravens perch calmly at her sides, serving as omens, familiars, or silent messengers of darker powers. The sculpt…
3 x 3 51mm netpot incubator to develope roots for NFT
I am a big fan of the Survival Story of a Sword King in a Fantasy World web comic. The sword was created by the elf king for Ryu Hanbin (the main character of the story). I drew up this sword design using onshape.com, which I am able to…
Turn your terrarium into a cursed woodland with this set of five unique, macabre tree stump hides. Originally born from a journey of designing functional boxes and coin holders, this collection has evolved into a series of "spooky and…
A unique 3D printable creation — this Nature Themed Miniature Base, Tree Roots, Leaves, Mushrooms, 25Mm Round Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 95.63x170mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.6mm and the Actual Depth is 1.7mm…
I'm designing a roots blower to use as a roughing pump for a vacuum chamber. This SCAD code uses math to generate the epicycloids and hypocycloids that define the shape of the rotor. This code needs OpenSCAD 2019.5 because of a command…
A simple clip for attaching 8 mm water hoses (Blumat) to beds from Grassroots & Root Riot. The clip will fit for most 25mm pipes and 8mm hoses. Can be used to secure the hose at the bed frame.
🎃 Halloween Smiling Pumpkin with Roots 🌙👻 Bring a playful touch of Halloween to your decorations with this 3D printed smiling pumpkin. Its big cheerful grin and twisted vine-like roots give it a unique and slightly magical look. Whether…
In traditional net pots roots gets tangled, leading to disturbed roots if transplanted. With all that surface area building residue, its not easy cleaning them. These two flaws are targeted with this design. Since this is an assembled…
I wanted to print the original but wanted to do it in one step so I combined both models.
This was an experiment to see if it was possible to have a piece with the supports as decoration. So I've designed a simple vase and did a play around on the BambuStudio to see if I could print the vase with root to look like a tree. Feel…
Headline: The Ultimate Stress-Free Transplanting Solution! Description: "Tired of damaging delicate roots during transplanting? Say goodbye to transplant shock with our innovative modular potting system. Designed for gardeners who want…
Elegance, focus, and perfect equilibrium captured in an extraordinary sculpt! Introducing the inspiring Tree Pose 3D figurine (Vrikshasana) . This sculpt showcases a female yogi balancing on one leg with hands raised together above her…
Easy to print in PLA or PETG.
A unique 3D printable creation — this Nature Themed Miniature Base, Tree Roots, Leaves, Mushrooms, 25Mm Round Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
This is a growing medium divider for the Back to the Roots aquaponic fish tank that can be found and Home Depots or online. I wanted a way to separate the plants as well as have a space for a label.
A unique 3D printable creation — this Nature Themed Miniature Base, Tree Roots, Leaves, Mushrooms, 25Mm Round Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
This vase has something organic and architectural at the same time, it seems intertwined, almost alive.
I printed this at 200% scale, with 5% infill. Threads must be printed with support if printed at original scale.
A unique 3D printable creation — this Nature Themed Miniature Base, Tree Roots, Leaves, Mushrooms, 25Mm Round Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
THIS MODEL HAS NOT BEEN TESTED YET AND MAY HAVE SOME ISSUES This is a 1/2 scale of the ACA Hurricane 130 MKII blower assembly, made for Jared's 1/2 scale Hurricane model. In theory, this should output >56 CFM at 4 to 5 PSI , but it's…
This is my design of a 3.75 inch...roughly...hanging plant pot. I designed this with a perfect lip to attach almost any plant hanger. Optimized for Bambu Labs printers but should work with any Orca slicer. I also built in several features…
Groot is a tree who saved the galaxy with a vocabulary of three words. Impressive. But try handing him your jacket and asking him to hold it: he says “I am Groot” and wanders off wearing your coat, as if nothing happened. This branch has…
Just an Minimalistic Planter with ventilation for Roots.
This is an original design for a 2 color presence token for the Spirit Island spirit Towering Roots of the Jungle . Together with the reminder tokens , you can print a set of 13 presence token, 3 defend tokens, and 3 isolate tokens as…
This enigmatic raven witch stands poised upon a suspended branch, her hood casting shadow over a faceless presence. Two ravens perch calmly at her sides, serving as omens, familiars, or silent messengers of darker powers. The sculpt…
Bring your woodland battlefields and forest dioramas to life with this highly detailed hollow tree stump terrain piece. Featuring deeply textured bark, exposed roots, creeping vines, and clusters of mushrooms, this sculpt captures the…
Roots of Flavor is a high-quality, tree-root inspired spice rack designed to bring natural elegance into your kitchen. The organic root structure creates a stable and visually striking base that holds multiple spice jars while adding a…
This is an original design for a 2 color presence token for the Spirit Island spirit Towering Roots of the Jungle . Together with the reminder tokens , you can print a set of 13 presence token, 3 defend tokens, and 3 isolate tokens as…
Photogrammetry scan of the large ficus tree in Plaça del Mercat in Palma de Mallorca. Detailed model, can be used for scenery in tabletop games. Use your creativity. The model prints easily and without support and is pretty detailed.
This is my design of a 3.75 inch...roughly...hanging plant pot. I designed this with a perfect lip to attach almost any plant hanger. Optimized for Bambu Labs printers but should work with any Orca slicer. I also built in several features…
Roots of Flavor is a high-quality, tree-root inspired spice rack designed to bring natural elegance into your kitchen. The organic root structure creates a stable and visually striking base that holds multiple spice jars while adding a…
Paranormal Mystery Art - South African Grootslang 3D printable model.