P
Printablescohenco
MG995 Standard Servo Arm/Horn
Print with 50% infill - ensuring better durability. A replacement horn for the MG995 standard servo
- Pobrania
- 3054
- Polubienia
- 122
- Ocena
- 4,5
Wyniki wyszukiwania: servo
1750 modeli
P
Printablespstimpel
Servo arm for Rancher 4x4, radio controlled, STLs by 3dsets.com
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…
- Pobrania
- 294
- Polubienia
- 22
- Ocena
- 5
P
Printablesnilok
ISO Station - With Large, Hidden Reservoir
EDIT: Added 2 example pics with glass to demonstrate the hidden tank and the smaller tank auto-filling. I love my various ISO Stations and used similar plastic containers in college labs, but that was a long, long time ago.....and I have…
- Pobrania
- 235
- Polubienia
- 39
- Ocena
- 5
P
PrintablesLuKowalski
Servo driven 4 or 6 mm Festo ball valve
In jet models Festo ball-valves are often used to cut-off the fuel pipe to the turbine after landing or during the refuel prozess to prevent the turbine from flooding with kerosene. In large model aircrafts above 25 kg takeoff weight…
- Pobrania
- 188
- Polubienia
- 16
- Ocena
- 0
P
Printablesc-arts-modelle
Lukisegler (electric RC glider) update: Servoplate for 9g (Mini-) Servos
Lukisegler update (english): Servoplate for 9g Servos Servoplate for 9g servos (standard-mini-servos). Lukisegler update (deutsch): Servoplate für 9g Servos Servoplatte für 9g Servos (Standard-Mini-Servos).
- Pobrania
- 188
- Polubienia
- 25
- Ocena
- 0
P
PrintablesFlo
Tool for VW Common Rail Diesel Engines Oil Filter Drain Reservoir (13 mm) Golf 7 and others
With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…
- Pobrania
- 178
- Polubienia
- 22
- Ocena
- 5
P
Printablesgeokscott
Motorized Blinds Tilt Servo Control through Home Assistant
I wanted to control the tilt of my 2" venetian blinds through Home Assistant using ESPHome. My first setup was using a 28BYJ-48 stepper motor which worked but is was barely strong enough for the job. I had to use gear reduction to power…
- Pobrania
- 167
- Polubienia
- 24
- Ocena
- 5
P
Printableslienmeat
5g servo mount
This is a lightweight servo mount for 5 gram servos. I designed it specifically to fit EMAX ES9052MD, but I can confirm it fits Flite Test PP A 5g servos just as well and probably most other 5g servos. Printing: 0.2mm layer height or…
- Pobrania
- 116
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDr.Enchanted
Arris Explorer E280 7” drone Rear Back Up Camera with Servo Tilt V2 Available
Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…
- Pobrania
- 106
- Polubienia
- 13
- Ocena
- 0
P
PrintablesBailey Qualey
wpl c24 servo axle mount with 10mm lift
an axle mount for the steering servo that also adds a 10 mm lift wpl c24 or c14
- Pobrania
- 90
- Polubienia
- 12
- Ocena
- 0
P
PrintablesJimleeQ
Gridfinity 1x1 SG90 servo mount or storage
A gridfinity 1x1 bin to hold 1 or 2 SG90 servos. I originally designed it to hold 1 servo, and store the cable in the rest of the space, but then realised that I might as well as fixings for a second servo, in case you wanted to mount 2…
- Pobrania
- 83
- Polubienia
- 19
- Ocena
- 5
P
PrintablesHobbydrucker
Servoholder for Carson Goldhofer 1:14 Trailer
Servoaufnahme, um einen Standardservo zur Ansteuerung der meiner Lenkachsen aufzunehmen. Er wird hinten durch die ersten Anlenkungen der Achsen fixiert, vorne sind zwei Bohungen im Rahmen des Goldhofer erforderlich. Damit wird zugleich…
- Pobrania
- 62
- Polubienia
- 8
- Ocena
- 0
P
Printablesmgr
2x3 goldpin mount. For servos or multipurpose.
This is an external mout for 2 row goldpin block. You can use it for servo connection or oter purpose. It has a holes for M2 screws. Printed with support for clean inside and good insert clearance.
- Pobrania
- 41
- Polubienia
- 4
- Ocena
- 0
P
Printablesetarina
Nespresso Original Water Reservoir Cover
My first project! I received a hand-me-down Nespresso Original machine that was missing the water reservoir cover, so I decided to make a replacement. I've tweaked it so that it fits snugly, but still has air channels to keep the machine…
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJT3D
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAntonio Fernández Ulloa
Escuadra servo RC
Escuadra para modelos RC en cualquier material, recomendamos PETG por su flexibilidad o ASA-ABS más flexibles y mejor terminación. Características: impresión rápida dependiendo del esfuerzo menos importante PLA → más fuerte PETG/ASA/ABS…
- Pobrania
- 32
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBri's Prints
Quanser QUBE Servo Functional Replica with Stepper
Why I made this as a gift for a professor after completing advanced control systems. Notice: Not affiliated with Quanser.
- Pobrania
- 32
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCranky Cat
Kyosho Burns steering servo mount
I made a version of this using the orignal mounting plate and sheet metal years ago. I've since converted the Burns to electric and after seeing the 3s battery holder I made, someone was interested in the servo mount, so here it is!…
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKleinerUhu
Schnellbefestigung für Robbe Servo FS100
Für die Befestigung des Servos werden 2 Klammern benötigt! Bitte im Slicer beachten
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLaHo
Reservoir to toilet connection
Connect reservoir with the toilet. PETG or ASA may be better, but in white I have PLA now. Print straight pipe as many times as needed. Supports needed only for Elbow90.stl. All parts printed with brim. Update 20240201: added Elbow90_V2…
- Pobrania
- 25
- Polubienia
- 0
- Ocena
- 0
P
PrintablesZoshi
Macap M2 coffee bean reservoir
This is a replacement bean reservoir for the Macap M2 coffee grinder. The original lid still fits on this one. It should be printed in vase mode. I printed it in vase mode with a 0.6mm nozzle. It turned out flexible but sturdy.
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMatthew Schultz
MJS.ART r0tring Isograph Reservoir Funnel
I use r0tring isograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 5
P
PrintablesWarmage
Axial Yeti Jr servo mount and electronics
Yeti Jr Servo mount and electronics, will fit stock servo and others that are 23mm wide holes are for m3 screws, servo screws should be 5mm max and bottom mount screws 12mm max i used a red translucent PETG filament , and tested on PLA…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMatthew Schultz
MJS.ART Koh-i-Noor Rapidograph Reservoir Funnel
I use Koh-i-Noor rapidograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMatthew Schultz
MJS.ART Staedtler Mars Matic Reservoir Funnel
I use Staedtler Mars Matic technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGnure
Tefal Oleoclean oil reservoir screw
Printed in PETG for food contact.
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMartin Hudek
Automatická zavora - Držáček pro servomotorek SG90
Žáci vytvoří jednoduchý držák pro servomotorek se závorou. Dále projekt naváží k vytvoření automatické závory pro Ozobot. Viz. video: https://www.youtube.com/shorts/vLNq0KbBg7o
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLudvig Broomé
Micro Servo 3D Model (STP)
3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.
- Pobrania
- 5947
- Polubienia
- 55
- Ocena
- 5
P
PrintablesAuri3D
Servo SG90 and Arm
This design is made for you to use in your projects in Fusion 360. You have .STEP and .f3d files for both the SG90 and the arm, or both in .STEP and everything in .f3d. You have the real measurements of one so you can use it perfectly for…
- Pobrania
- 4153
- Polubienia
- 70
- Ocena
- 0
P
PrintablesLudvig Broomé
Standard Size Servo 3D Model (STP)
3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.
- Pobrania
- 4112
- Polubienia
- 39
- Ocena
- 5
P
PrintablesTJDesign
Bean reservoir (hopper) extension Philips Saeco 1200-5500 (latte go) series
Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…
- Pobrania
- 2659
- Polubienia
- 162
- Ocena
- 4,72
P
Printablesmobiobi
Easy Robot Arm (SG90 servos & now steppers too) UPDATED 03/21
Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc. All…
- Pobrania
- 2573
- Polubienia
- 345
- Ocena
- 5
P
PrintablesRRD
MG90S Servo
1 to 1 scale of a MG90S servo. Could be convenient for projects to build in your servo!
- Pobrania
- 2375
- Polubienia
- 42
- Ocena
- 5
P
PrintablesMeyui
Komori Planter with Reservoir
Komori Planter | with reservoir A quiet evolution of the Kumiko planter. This is the new version of the Kumiko planter design, I wanted to explore a more understated form. With Komori Planter, I’ve moved away from the traditional footed…
- Pobrania
- 2272
- Polubienia
- 963
- Ocena
- 4,71
P
PrintablesWave
SG90 SERVO HORN
This is replacement horn for the *SG90* servo The inner teeth should fit, there is also looser and tighter versions
- Pobrania
- 2271
- Polubienia
- 63
- Ocena
- 5
P
PrintablesExLoop
Servo horn round for 55G Servo (25T spline)
This is a round servo horn for a 55G Servo with 4 M3 holes.
- Pobrania
- 2175
- Polubienia
- 47
- Ocena
- 4
P
PrintablesAcE Krystal
Servo automated iris / aperture for air flow controll
I finished the project and will upload all the files and code as is. Servo Test (with end stop current detection) : Finished Project : https://www.youtube.com/watch?v=DbXVjOoNJw4 Materials needed : - 5 m3 x 5mm - Servo FT90R (continuous…
- Pobrania
- 2036
- Polubienia
- 561
- Ocena
- 4,86
P
PrintablesSireInsectus
MG995 Servo
See https://www.amazon.com/MMOBIEL-Airplane-Helicopter-Compatible-Raspberry/dp/B09BZTRSDP/ref=sr_1_2_sspa
- Pobrania
- 1901
- Polubienia
- 28
- Ocena
- 0
P
PrintablesA-11 Designs
Robot servo motor gripper
Robot servo motor gripper
- Pobrania
- 1832
- Polubienia
- 218
- Ocena
- 5
P
Printablesplog
HC-SR04 ultrasonic sensor mount for 9G micro-servo
Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor. This design is a single piece print with no supports that printed quickly in PLA+…
- Pobrania
- 1753
- Polubienia
- 40
- Ocena
- 4,5
P
PrintablesBaxcor
MG996R Servo Model
This is a 3D model of the MG996R servo. It's purpose is to help you design servo brackets and other parts that require a standard sized servo. * Just import this model into your 3D design software and now you have an accurate…
- Pobrania
- 1694
- Polubienia
- 18
- Ocena
- 0
P
PrintablesTH
Servo connector clip
If you are like me buying cheap servo connectors without additional housing this might add feel of extra foolproof safety. Printing 0,15mm layer height, 32 pcs will take approx 3h
- Pobrania
- 1666
- Polubienia
- 203
- Ocena
- 5
P
PrintablesKalleKnall
OPEL Astra J washer fluid reservoir cap / Wischwasserbehälterdeckel 13227300
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…
- Pobrania
- 1628
- Polubienia
- 146
- Ocena
- 4,88
P
PrintablesBalex
Ultrasonic sensor HC-SR04 mount on servo
Just added the smile like on the original design https://www.thingiverse.com/thing:1364024 :-) Fits perfectly Ultrasonic HC-SR04 sensor and standard servo mount Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
- Pobrania
- 1564
- Polubienia
- 36
- Ocena
- 5
P
PrintablesKevin
SG90 Servo Mount
Printed with Prusament PETG White 0.2mm support is required.
- Pobrania
- 1551
- Polubienia
- 69
- Ocena
- 4,5
P
PrintablesOKB
Servo automated iris / aperture for air flow controll IKEA Platsa
Remix of Inertpyro' awesome aperture door ( https://www.thingiverse.com/thing:529661 ), combined with AcE_Krystal' genius servo driven open/close function to fit 120mm fans in Ikea Platsa enclosure. Or any other 18mm (3/4") thick plates.…
- Pobrania
- 1464
- Polubienia
- 609
- Ocena
- 4,57
P
Printablesjhaand
SG90 servo holder
A bracket to mount a SG90 or MG90 servo to a plate. Normally printed in PLA with 0.15 mm layer height.
- Pobrania
- 1424
- Polubienia
- 39
- Ocena
- 5
P
PrintablesNescoroco
Universal servo arm kit
These arms are compatible with the following micro servos: MG90S SG90 MG90 SG92 MG92B FS90 FS90R EMAX ES08A EMAX ES08MA EMAX ES08MD HobbyKing / Turnigy TGY-90S HobbyKing / Turnigy TG9e TowerPro SG92R TowerPro MG92B Blue Bird BMS-101MG…
- Pobrania
- 1376
- Polubienia
- 418
- Ocena
- 3,5
P
PrintablesDave Long
MG995 Servo Arm
Various rotors for MG995 servos. Models includes a 1, 2, 4 and 6 leg rotor. Options are also included for holes on the legs to mount components to the servo rotor. Fits are meant to be very tight in order to hold up to the force the servo…
- Pobrania
- 1368
- Polubienia
- 41
- Ocena
- 4,5
P
Printablesmavu
Micro-servo (SG90) round mounting plate
I made this mounting plate for a micro servo because my 9G servos didn't have the disc mount which was used in this robot arm model ( http://www.thingiverse.com/thing:1684471 ) It fits my "Tower Pro" SG90 micro servos, which have 20 tiny…
- Pobrania
- 1334
- Polubienia
- 49
- Ocena
- 5
P
Printablesprint.me!
MG90S Servo arm
precise replica of the arm that came with my MG90S Servo Higher resolution / more detailed / fixed / easier to print version also available (improved versions)
- Pobrania
- 1329
- Polubienia
- 28
- Ocena
- 3,33
P
PrintablesN7 Cat
9g Servo Linear Actuator (Ball Bearing)
Prints as one part, some trimming of the raft will be needed but I've added clearances around the gears to reduce trimming needed there. The intent of this is to create a relatively low cost / low backlash linear actuator using the common…
- Pobrania
- 1296
- Polubienia
- 173
- Ocena
- 5
P
PrintablesThe Brumberjack
Servo Mounted Ball Valve Blast Gate
Assembled with all of the same hardware as the original one, plus 2 longer bolts. I used 35mm I believe. Here is the link to the video where I talk about the servo motors I used.
- Pobrania
- 1239
- Polubienia
- 141
- Ocena
- 5
P
PrintablesAbra Kadabraham
Servo Iris Shutter
A iris shutter for a beamer, to show/hide the projection instant. Operated by servo motor. alternative spur gears for different servos.
- Pobrania
- 1236
- Polubienia
- 179
- Ocena
- 5
P
Printablesjhaand
Servo extender SG90
An extension arm to get a longer reach for the SG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the MG90 servo's
- Pobrania
- 1184
- Polubienia
- 53
- Ocena
- 5
P
Printablesjuh
fischertechnik SG90 mini servo system
Changelog/News: 2021-02-03: Added new variant "08 Gear rack drive (main body) v5_strongerprint" for easier removal of support structures 2019-02-24: Updated "11 Gripper arm" to v5, implementing these suggestions 2019-02-10: Peter (…
- Pobrania
- 1147
- Polubienia
- 133
- Ocena
- 5
P
Printablescimoalpacino
Wiper Washer Reservoir Cap (TPU print)
Windshield Wiper Washer Fluid Reservoir Tank Bottle Cap (For Peugeot and other cars). Printed in TPU (230/50), without supports. Included Solidworks file for editing and customizing :) Print instructions Category: Automotive Summary…
- Pobrania
- 1065
- Polubienia
- 80
- Ocena
- 4,75
P
PrintablesGenericGeek
Servo Nozzle Brusher (Voron V0.1)
This is a Nozzle Brusher I designed for my Voron V0.1. Say goodbye to cleaning your nozzle manually. This device will automatically clean the nozzle upon starting a print, or at any point using a macro. A guide for installation on the…
- Pobrania
- 1058
- Polubienia
- 183
- Ocena
- 5
P
PrintablesDana
Holoprojector Servo and Astropixels Mount (MK4 Dome)
Version 1.2 Added 2 new parts that are specific to mounting in the top “Pie” location. TopHoloFrameServo and TopHoloLockRing. Intended Design/Use I designed these parts for mounting MG90S servos and Astropixels to MrBaddeley's MK4 R2-D2…
- Pobrania
- 1029
- Polubienia
- 74
- Ocena
- 4,83
P
PrintablesRCPrinter
Modified Steering Bar to fit DS3218 Servo
This is a modified steering bar which better fits the dimension of a standard DS3218 servo. Print with supports.
- Pobrania
- 1026
- Polubienia
- 36
- Ocena
- 5
P
PrintablesPetos Safarik
Bees water platform to drink with bottle reservoir
I failed to find useable water station for bees, therefore I created this one. It's 130x130mm, with 114 hex-shaped platforms for insect to drink from. It's compatible with any PET bottle with standard top. I tested up to 0.7l big one and…
- Pobrania
- 957
- Polubienia
- 391
- Ocena
- 5
P
PrintablesJosselin Hefti
Servo motor STS3215 FEETECH model
F3Z and STEP files
- Pobrania
- 939
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMSTVS
pinch valve powered by servo
Gary Wilson Jr. (named by GF) designed for Project “Cocktail mixer”: intended for 6 mm PTFE-Tube (might also work for smaller an up to 7-8 mm) -controlled by Micro Server 9g (SG90) printed in regular PLA Since I´m still working on a…
- Pobrania
- 927
- Polubienia
- 64
- Ocena
- 5
P
Printablesdemetrius
Micro Servo SG90 - Dummy
A simple micro servo dummy for help on your creation needs. One thing i had no idea about this servo (particularly the Tower Pro, not sure about others) is that its body is not perfectly square but is slightly tapered towards the top.…
- Pobrania
- 892
- Polubienia
- 24
- Ocena
- 0
P
PrintablesTobias Stanzel
Servo automated iris - sg90 mod for esphome / Home Assistant
Update: Added .step and fusion360 source files I plan to use this automated iris remix for my prusa enclosure and later to control my air exhaust system from the printers and laser cutter. Using a 24 teeth spur gear instead of th 12…
- Pobrania
- 872
- Polubienia
- 147
- Ocena
- 4,25
P
PrintablesCreative Electronics
RC Servo Robot Arm
I made a remote controlled Servo Robot Arm. I made a video about this awesome project: Inventor Design Tutorial I made a DIY Video: DIY RC Servo Robot Arm Materials you need: - 2x FS90 Servo - 1x FS90R Continious Servo - RC System (I use…
- Pobrania
- 871
- Polubienia
- 163
- Ocena
- 5
P
PrintablesNocebo
Vector Concept Robot ARM CLAW (standard servo)
You need only a good 3D printer and 8x 3mm screws.
- Pobrania
- 849
- Polubienia
- 113
- Ocena
- 0
P
PrintablesSireInsectus
SG-90 Servo
See https://www.amazon.com/Smraza-Helicopter-Airplane-Control-Arduino/dp/B07L2SF3R4/ref=sr_1_1_sspa
- Pobrania
- 846
- Polubienia
- 17
- Ocena
- 5
P
PrintablesBrian Flores
Servo Tester Case - Easy Print
Tried the others, but they would not fit the servo tester I received. The others were not easy to print the text. So I made a new one that prints text mid layer (with a spool swap). Enjoy! Screws are 2.5mm hex bolt Category: 3D Printing…
- Pobrania
- 843
- Polubienia
- 101
- Ocena
- 5
P
Printablesspinach
rack and pinion (Linear Servo Actuator)
print all of the files. connect the gear to a servo horn.glue the motor to the box.
- Pobrania
- 829
- Polubienia
- 54
- Ocena
- 5
P
Printablescohenco
MG995 Servo Horn
Print using Dynamic Quality (0.16mm) with 30% infill. The servo horn is an exact fit, different printers/settings will affect the attachment to the MG995 servo. Otherwise, additional force/tools may need to be used.
- Pobrania
- 799
- Polubienia
- 57
- Ocena
- 0
P
PrintablesCederb
Simple Servo Mount
A simple servo mount, screw your servo to it, screw it to a base, and you are done :) Originally published on YouMagine back in 2016
- Pobrania
- 794
- Polubienia
- 74
- Ocena
- 5
P
Printableshewijess
Servo Mount
A basic servo mount to attach the base of your servo.
- Pobrania
- 789
- Polubienia
- 59
- Ocena
- 5
P
PrintablesThe_Hunter
Micro Servo SG90 9g flatmount bracket
Small bracket for mounting a SG90 9grams Servo flat against a surface with standaard screws. Recomended to print in PETG or ABS.
- Pobrania
- 787
- Polubienia
- 35
- Ocena
- 5
P
Printablesfinnmglas
SG90 printable servo rotors (all types)
Fully printable SG90 Stepper rotors. Might also work with other servos if you scale it appropriately. Category: Robotics
- Pobrania
- 781
- Polubienia
- 76
- Ocena
- 5
P
Printablespw.prints
Standard Servo Mount (Flat)
Servo mount designed for my R/C boat, flat as possible, small as possible and stable as possible. Servo mount is designed to glue it into the boat but can also be screwed, bottom hole diameter is 3mm. Fits with standard 40x20mm servos.…
- Pobrania
- 776
- Polubienia
- 43
- Ocena
- 5
P
PrintablesAnthony DAUGUET
Linear servo actuator for SG90
Very simple to print. Use 2 M2 screws for servo mounting and 2 M3x10 screws for the rack
- Pobrania
- 756
- Polubienia
- 71
- Ocena
- 4,5
P
PrintablesNordlicht
IKEA Samla 22L Dry Storage Box with Silica Reservoir
I wanted a simple storage solution for spare filament spools that utilizes the widely available IKEA Samla 22l Storage box with lid and keeps the filament dry during storage. To keep it as simple as possible, the spools can rest directly…
- Pobrania
- 735
- Polubienia
- 150
- Ocena
- 4,91
P
PrintablesMint
9g Servo Claw
Why? I wanted to make a claw using this model and I learned it was made originally for a laser cutter. I have spent many hours perfecting this for a 3D printing. What is needed? You can either print the Claw.stl or print the following: 4…
- Pobrania
- 722
- Polubienia
- 48
- Ocena
- 4,67
P
PrintablesLucaDilo
COBOT: Four servo legs and distance sensor robot
COBOT: Four servo legs and distance sensor robot I present my latest project, COBOT, a robot that can move thanks to 4 servo motors and get the distance to obstacles with the HC-SR04 distance sensor. This is an ongoing project I have made…
- Pobrania
- 719
- Polubienia
- 105
- Ocena
- 5
P
PrintablesGerber
Micro Robot arm (9g Micro Servo)
WARNING: this model is not perfect, many things do not fit together perfectly and require sacrifice to assemble correctly. The old part was 10 times too small. It is now fixed in the files that end with (- mm). I've also added a file with…
- Pobrania
- 717
- Polubienia
- 75
- Ocena
- 0
P
PrintablesGerber
Avatar Linear Servo Actuators
This is a general purpose linear servo actuator (pusher style). Two sizes have been designed, for different space constraints and force outputs. These use continuous rotation servos which helps keep the cost very low. Off the shelf…
- Pobrania
- 696
- Polubienia
- 64
- Ocena
- 5
P
PrintablesBrayden Adler
Robotic Claw for Servo motor
I'm using my design for FTC 2022 and it works great, + it's light.
- Pobrania
- 688
- Polubienia
- 25
- Ocena
- 5
P
PrintablesMichalCiombor
Servo automated iris / aperture for 120 mm fan
This is a remix from https://www.printables.com/model/5122-servo-automated-iris-aperture-for-air-flow-control Many thanks to @AcEKrystal I've changed the base plate only, to mount it directly to 120 mm fan. Servo motor is moved to allow 4…
- Pobrania
- 665
- Polubienia
- 161
- Ocena
- 4,25
P
Printablesjmillerfo
Voron 2.4R2 Filametrix Filament Cutter Gantry Servo Mount
Revision 1: 2025-11-15 Revise Amazon links per currently available items Reflect Happy Hare's incorporation of Filamentrix's Filament Cutter into its code base Introduction The Voron 2.4R2 with Happy Hare provides a means to cut off the…
- Pobrania
- 652
- Polubienia
- 150
- Ocena
- 4,67
P
PrintablesNate DiSalvo
Modified servo linear actuator
I modified this for use with Tetrix pieces. This design has become my most popular and I want to credit it's original designer. See the remixed design Print Settings Printer: Qidi tech Rafts: Doesn't Matter Supports: Yes Resolution:…
- Pobrania
- 646
- Polubienia
- 55
- Ocena
- 5
P
Printablesjuh
PCA9685 servo driver case (Fischertechnik or standalone)
A case for the PCA9685 16-Channel Servo Driver board from adafruit and its cheap chinese clones (see note below). The bottom part comes in two versions: a plain standalone version and one with connectors for the fischertechnik…
- Pobrania
- 644
- Polubienia
- 52
- Ocena
- 5
P
PrintablesCode and Make
Tower Pro MG946R (55g) Servo Arm Disk Horn Round Mount (20mm)
20mm disk mount for Tower Pro MG946R servo. Disk diameter: 20mm Disk thickness: 2mm Center hole diameter: 3mm Outer hole diameter (with holes version): 1.5mm Outer hole distance from center (with holes version): 8mm They should be a tight…
- Pobrania
- 635
- Polubienia
- 25
- Ocena
- 5
P
PrintablesByteSlinger
Servo Hinge for Iron Man Helmet
This is a servo hinge setup for use with MIPRESIDENT's Iron Man Mark III helmet ( http://www.thingiverse.com/thing:260152 ). You can see my final build here: http://www.thingiverse.com/make:286759 And a video of it in use here:…
- Pobrania
- 634
- Polubienia
- 144
- Ocena
- 3
P
Printableshugokernel
Parametric servo arms
Parametric servo arms generator with OpenSCAD. Download last version on GitHub : https://github.com/hugokernel/OpenSCAD\_ServoArms Instructions Easy to use : servo_standard(20, 4); first parameter : the arm size second parameter : the arm…
- Pobrania
- 629
- Polubienia
- 35
- Ocena
- 0
P
PrintablesAneoPsy
Coolant Reservoir Cap
I created this Coolant Reservoir Cap to replace my broken one Thread: ISO M33x3 ⚠ Use PETG or a plastic that can withstand higher temperatures. BENEFITS: Fast to print Easy to use Perfect fit Designed for FDM Printing No support needed…
- Pobrania
- 622
- Polubienia
- 30
- Ocena
- 5
P
PrintablesBass.Boi
Heavy Duty Pan&Tilt FPV for TowerPro MG90S 180deg metal servo
All the credits goes to https://www.thingiverse.com/thing:3050358 But the original does not fit TowerPro MG90S 180deg metal servo i have. Slight changes were needed here and there, now it's complete and everything fits well. Including…
- Pobrania
- 616
- Polubienia
- 51
- Ocena
- 5
P
PrintablesNaesstrom
ultrasonic sensor (HC- SR04) bracket servo mounted
I just flattened the foot and added a groove for a servo mount instead at the bottom. A great tutorial on how to make a arduino radar can be found here: http://howtomechatronics.com/projects/arduino-radar-project/ Category: Engineering
- Pobrania
- 616
- Polubienia
- 20
- Ocena
- 4,33
P
PrintablesMaesgd
Twisted planter _270 with integrated water reservoir ( onepiece _ No support)
2nd variation of my original twisted planter. This time the planter is 270 degrees twisted compared to the original 60 degrees. A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the…
- Pobrania
- 603
- Polubienia
- 147
- Ocena
- 4
P
PrintablesCrashoverride
Horizon AeroScout 1.1m Servo & Battery tray
Being newer to RC flying, I crashed my AeroScout hard enough to fracture the wooden servo & battery tray. It features a built-in lap joint for strength when gluing. I originally tried an existing design by TeslaScorpion , but ended up…
- Pobrania
- 598
- Polubienia
- 20
- Ocena
- 0
P
PrintablesSireInsectus
PCA9685 16 Channel PWM Servo Motor Drive IIC Interface Module 12-Bit
See https://www.amazon.com/gp/product/B08CHCG42N/ref=ppx_yo_dt_b_search_asin_image
- Pobrania
- 595
- Polubienia
- 11
- Ocena
- 0