Wyniki wyszukiwania: sfp

Sortowanie

143 modeli

P
PrintablesThijs

Bracket Lenovo M720q 10G PCI-E NIC X710-DA2 Dual SFP+

Bracket for Intel NIC X710-DA2 by Dell for the Lenovo M720q. The bracket has: Small slots for the LEDs are included. Holes for M3-inserts. Aditional holes for ventilation. Recess for USB cable. It is printed with the outside facing side…

Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu

Pobrania
25
Polubienia
0
Ocena
0
P
Printablesfz

SFP+ Cable Keystone Jack

A keystone jack to hide the hole in your patch panel if you're passing a SFP+ module (or other cable) through one of the keystone slots. The center hole is 4.75mm in diameter, but there are .f3d and .step files available if you have a…

Pobrania
1577
Polubienia
216
Ocena
5
P
Printablesxvzf

SFP(+) Dust Cover

Needs to be printed with a raft and without supports ! I used Greentec PRO and printed batches for 40 on a Voron V0, 90 Degrees Celsius Bed, 235 material. Likely works with PETG/PLA as well

Pobrania
1321
Polubienia
119
Ocena
4,83
P
PrintablesEXEN

UCG-Fiber SFP+ Module Cooler (X-ONU-SFPP, WAS-110)

This is a cooler that mounts on top of the UCG-Fiber to cool the SFP+ port. Specifically made for the WAS-110 and X-ONU-SFPP modules. You can find pre-soldered DIY fan + power module kits here: https://exen.sh/products/diy-kit-ucgf-cooler

Pobrania
619
Polubienia
63
Ocena
5
P
Printablespauvre10m

Transceiver (SFP/QSFP/XFP) beer case

Simple SFP beer case multiple varient available : SFP : 5x5 10x10 XFP/QSFP: 5x5 10x10 Copper SFP (more tick on top) : 5x5 10x10 QSFP DD (due to heatsink) : 5x5 10x50 more varient could be added as request. This project is freely inspired…

Pobrania
611
Polubienia
39
Ocena
5
P
Printablesmfischer79

SFP Fiber Optic Dust Cover/Plug/Cap

Simple and quick print. Easy to remove! Check out all other port covers USB-A port cover - https://www.printables.com/model/404578-usb-a-dust-cover-plug USB-C port cover - https://www.printables.com/model/303039-usb-c-dust-coverplugcap…

Pobrania
476
Polubienia
73
Ocena
4,71
P
PrintablesFrostbyte3D

Stackable SFP holder

Print as oriented, supports not required. Any material.

Pobrania
378
Polubienia
34
Ocena
5
P
PrintablesSkedaddle

SFP transceiver storage box

No supports needed. Use magnets with 5mm diameter and 3mm height.

Pobrania
368
Polubienia
28
Ocena
4,75
P
PrintablesJan-E.de

Mounting Bracket for Ethernet/SFP Media Converter in 19" or 10" Rack

This is a bracket to mount a network media converter to the rail in a network cabinet/rack. As it is just fixed on one side, it fits 19" and 10" racks equally well. There are two holes for the cable inlet on the back to allow the…

Pobrania
365
Polubienia
60
Ocena
5
P
Printablesmikeymakesit

SFP Transceiver Lever Puller

I made this to more easily lift the lever on SFPs inserted into densely packed ports. Happy making! For what it's worth I printed mine in ASA and those little fingers are plenty strong.

Pobrania
345
Polubienia
44
Ocena
5
P
PrintablesGerald85

Boite rangement sfp avec support

boite rangement sfp fermeture avec 4 aimants ronds 3mm x 6mm à coller support pour rangement de 8 boites à la verticale

Pobrania
318
Polubienia
24
Ocena
5
P
PrintablesJonatan

19" rack mount for EdgeRouter X SFP

This is a very simple rack mount for Ubiquiti EdgeRouter X SFP as well as its power brick. I did not want to deal with too much tolerances so I designed it around cable ties, which is functional but a bit crude. You will also need two M5…

Pobrania
306
Polubienia
34
Ocena
5
P
PrintablesAndrew Yong

SFP LC Dust Cap

A dust cap for LC duplex SFPs. A simplex version (for BiDi SFPs) was exported too, this is just the same model without an extrude on the Rx connector. F3D file included for adjusting tolerances as needed. My measurements were optimized on…

Pobrania
303
Polubienia
32
Ocena
4
P
PrintablesBlake

Simple SFP Holder

Simple 12 slot SFP holder. I had a bunch of SFP's just laying around and wanted an easy way to store them a little more organized.

Pobrania
300
Polubienia
24
Ocena
5
P
Printablestwei

Gridfinity 8 SFP+/SFP28 Fiberoptic Transceiver holder

This Gridfinity-Compatible Organizer allows you to store up to 8 SFP/SFP+ Fiberoptic Transceivers.

Pobrania
283
Polubienia
25
Ocena
5
P
PrintablesOestle

40mm rack fan mount for SFP adapter cooling

I am using a couple SFP+ RJ45 adapters that get quite hot. This is a mount to cool them with a 40mm fan, i used a Noctua NF-A4x10 that's USB powered. The fan screws right in with the included screws.

Pobrania
274
Polubienia
40
Ocena
5
P
Printableskf0cqx

SFP Dust Covers

I was was frustrated trying to use other designs as they had nothing to grab to pull out, and they also overlapped into ports next to them on my Brocade ICX 6610 48P. So I threw these together. They fit great and work wonderfully. PLA has…

Pobrania
272
Polubienia
25
Ocena
5
P
Printablesinnercube

SFP or SFP+ Port Cover

To protect the SFP ports of my network switch I created this plugs. One simple version which is easier to print and sits flush against the switch. I prefer this one. And a version with a pin for easier removal. But because of the print…

Pobrania
245
Polubienia
15
Ocena
5
P
PrintablesMartinRowan

Dell QLogic 57810S Dual Port 10Gbps SFP+ Card Low Profile Bracket

A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…

Pobrania
231
Polubienia
10
Ocena
0
P
PrintablesDavid Myers

QSFP+ Plug/Cap

This is a plug/dust cap for QSFP+, QSFP28, QSFP56, QSFP-DD, QSFP112, and QSFP-DD112 ports. TPU is recommended for the best fit.

Pobrania
213
Polubienia
14
Ocena
4,67
P
Printablestahosa

SFP Module Storage Box

Are you looking for a better way of storing all those SFP modules you have in a bag, or rattling around in your rack drawer? Print this box to neatly house them, or protect them while transporting them to your remote sites. Based on the…

Pobrania
210
Polubienia
28
Ocena
5
P
PrintablesEvilProphet

ESMAG - Magazines Holder - HK SFP9 (VP9)

Introduction I like to keep everything in my gun safe tidy and make use of the otherwise unused wall space. Since the safe is lined with fabric, I designed a series of magnetic holders for magazines, firearms and accessories. Strong…

Pobrania
209
Polubienia
14
Ocena
0
P
Printablesrmblr

Lenovo M720q baffle for Melanox CX312A and Melanox CX322A 10GbE SFP+ NIC

This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…

Pobrania
184
Polubienia
26
Ocena
5
P
PrintablesUstramator

Olympiakos (OSFP) Greek Sports Team keychain ΟΣΦΠ

A remixed keychain of Olympiakos Piraeus (OSFP) Greek Sports Team

Pobrania
181
Polubienia
8
Ocena
5
P
Printablesyoureunwelcome

SFP Tray

A safe way to store cleanly many SFPs. Sometimes you want to have them take up less space then the massive amount of plastic they're shipped in.

Pobrania
174
Polubienia
16
Ocena
5
P
PrintablesAngusGT

SFP Holder/Lid

If you work in tech, you probably know what an SFP is. And if your job is like mine, you end up with over a hundred of these little buggers sitting in a plastic bin. And you can never find the right one when you need it, either! My…

Pobrania
165
Polubienia
12
Ocena
5
P
Printablestwei

Gridfinity 12 QSFP+/QSFP28 Fiberoptic Transceiver holder

This Gridfinity-Compatible Organizer allows you to store up to 12 QSFP+/QSFP28 Fiberoptic Transceivers.

Pobrania
163
Polubienia
14
Ocena
0

Desktop SFP holder

Needed a solution for storing my growing collection of SFP modules, so I came up with this. Printed from Prusament PLA Galaxy Black on a stock Prusa i3 MK3S

Pobrania
162
Polubienia
19
Ocena
4,33
P
PrintablesHexxeh

X-ONU-SFPP direct mount cooler for 40mm fan

Remix of EXEN's design that's been adapted to accept a 40mm fan instead of the 25mm used on the original

Pobrania
157
Polubienia
7
Ocena
0
P
PrintablesMi09

4020 fan housing for cooling XGSPON ONU Stick SFP+ (8311 WAS-110) rack mountable for UDM Pro/SE/MAX

4020 fan housing for cooling XGSPON ONU Stick SFP+ (8311 WAS-110) rack mountable for UDM Pro/SE/MAX XGSPON ONU Stick SFP+ Link1 , Link2 Fan model: 4020 Requires support: Tree Slim What you see in the image was printed with Creality…

Pobrania
153
Polubienia
14
Ocena
0
P
PrintablesEMCBenni

Box for SFP

Box for SFP plugs Print settings: 0.2mm layer height Arachne wall generator for the seal to print properly Use variable layer height to smooth the top of the hinge I had better results with the bridged latch bottom when I turned it…

Pobrania
140
Polubienia
17
Ocena
0
P
PrintablesStougaard print

Edge Router X SFP 10 inch rack mount

Have create this mount to hold the Edge router X SFP with psu in the back to mount in a 10 inch rack. there is a clamp with that needs 2 screws in 3x10mm to mount the edgerouter X SFP securely so it doesn't move around when plugging and…

Pobrania
136
Polubienia
18
Ocena
0

Box for 3 SFP modules

Box for 3 SFP modules.

Pobrania
127
Polubienia
12
Ocena
4,33
P
PrintablesRozzo

SFP Transceiver Lever Puller V2

Easily lift the lever on SFPs inserted into densely packed ports. Now with a new and improved design optimized for 3D Printing Post your makes below and please throw a like on the model!

Pobrania
127
Polubienia
8
Ocena
0
P
PrintablesTan Wei

SFP+ 10G DAC Connector Cover

Sharing a simple custom-designed SFP+ DAC Connector Cover for all the fellow network/home-lab-savvy forumers here. This cover is perfect for lazy individuals (like me) who do not want to unplug their cables but keep them protected and…

Pobrania
123
Polubienia
13
Ocena
5
P
Printablesp1c

NIC bracket for HP 546SFP+/Connectx-3 in m720q

Intro Designed to be printed face down. Holes included for airflow. Sturdy connections to card and case provided to ensure minimal risk of breaking during installation. No modifications to case required. Print Settings 0.6mm 10% infill No…

Pobrania
114
Polubienia
12
Ocena
0
P
Printableskukulin

HORACO 8 port 2.5G +1 10GSFP managed switch rack mount for Modular 1U Relay Rack Mount

I made this remix to add 2.5g switch to rack together with my old TPlink switch. the switch model i have: https://www.aliexpress.com/item/1005005943823096.html left side is printed from original model here:…

Pobrania
108
Polubienia
12
Ocena
0
P
PrintablesClark Cox

Gridfinity SFP Holder

Simple bin to hold my spare SFP modules.

Pobrania
93
Polubienia
10
Ocena
5
P
PrintablesWasamolle

Bracket Lenovo M720Q 10Gtek PCI-E NIC X520-A2 Dual SFP+

I made a little bracket to properly mount a dual SFP NIC inside my Lenovo Thinkcentre M720Q. Small slots for the LEDs are included. The model has holes for M3-inserts. It is printed with the outside facing side downwards.

Pobrania
89
Polubienia
7
Ocena
5
P
PrintablesPatchwork

Gridfinity SFP Holder

SFP Holder for Gridfinity. I included the freecad files if you want to edit them.

Pobrania
88
Polubienia
13
Ocena
5
P
PrintablesLordBBQ

SFP(+) socket dust plug

This part just covers a SFP port found in high end networking equipment. These help protect these and often these sensitive connectors. Designed especially for applications where ports are right next to each other, so these plugs are…

Pobrania
88
Polubienia
6
Ocena
0
P
PrintablesCoffee Dynamo

40mm rack fan mount for SFP ports, 100º airflow angle

Targeted SFP/Transceiver Cooling Mount (Remix) Objective High-performance SFP modules—specifically RJ45 10GbE transceivers—generate significant heat that can lead to thermal throttling or premature hardware failure. This mount is designed…

Pobrania
85
Polubienia
15
Ocena
0
P
Printables0x56

Smaller SFP Tray

A safe way to store a handful of unused SFPs (up to 16) so they're not sitting unprotected on the desk or banging around in a drawer.

Pobrania
85
Polubienia
6
Ocena
0
P
Printables4o66

SFP Storage Case (V3)

V3 Update: Turns out that loading it with SFPs makes it significantly heavier, and it really doesn't like being dropped. Following field trials at work, I have included two “bumper” pieces intended to be printed in TPU, the glued on using…

Pobrania
84
Polubienia
12
Ocena
3
P
PrintablesT-omi

SFP and SFP+ transceiver storage rack

This thing is organizer for standard SFP and SFP+ transceivers. I am storing them in my drawer and it was making horrible noise when I was opening and closing it plus there was high chance of damaging those transceivers. This way all of…

Pobrania
82
Polubienia
13
Ocena
5
P
PrintablesScott Paladin

SFP Dust Cover

Because apparently dust is the enemy of progress: a supremely mediocre dust cover for your lonely SFP ports. Print it "port" side down, preferably in TPU but PETG might work. Will it look professional? Absolutely not. Will it keep…

Pobrania
81
Polubienia
6
Ocena
0
P
Printablesidcrook

10-inch 1U rack mount shelf for YuanLey YS25-0802 - 8 Port 2.5 GbE plus 2 Port 10G SFP+ ethernet switch

Switch Dimensions Exterior 197.1 x 73 x 29 mm ( 7.76 X 2.87 x 1.14 inch ) distance between mounting holes: 129.5 mm ( 5.1 inch ) measured 43.5 mm from front measured 29.5 mm from rear Created YS25-0802 parameter set in my fork:…

Pobrania
81
Polubienia
12
Ocena
5
P
PrintablesKenny

HP NC552SFP Dual Port 10Gbps SFP+ Card Low Profile Bracket

Printed with ERYONE PLA 180°C With support PRUSA i3 MKS+

Pobrania
76
Polubienia
6
Ocena
0
P
Printablesidcrook

10-inch 1U rackmount for YuanLey YS25-0801 8 Port 2.5G + 10G SFP switch rack mount

10-inch 1U rack mount version for YuanLey YS25-0801 ethernet switch. Printed the ears with long edge on build plate. Source: yuanley_YS25-0801

Pobrania
68
Polubienia
9
Ocena
5
P
PrintablesChris Jones

Ubiquiti SFP Wizard Case

Inspired by NWalen's case this case is designed to protect the Ubiquiti SFP Wizard from daily knocks/transport. Shaped to match the slight narrowing of the SFP Wizard at the top and bottom. Recess provided for the power switch, which…

Pobrania
65
Polubienia
6
Ocena
5
P
PrintablesDHeigl

SFP Storage Box

Box storing 10 SFPs

Pobrania
63
Polubienia
9
Ocena
0
P
Printablesidcrook

10-inch 1U rack mount shelf for YuanLey YS25-0402 (4 Port 2.5 GbE plus 2 Port 10G SFP+ ethernet switch)

Wanted to incorporate another model in my setup. This time instead of modifying or modeling the rack mount shelf, an existing OpenSCAD library suitable to the purpose was used. Found https://github.com/wildegnux/universal-rack-shelf in…

Pobrania
63
Polubienia
3
Ocena
0
P
PrintablesRifat

Lenovo P330 Dell Mellanox ConnectX-3 SFP+ Dual Port

Dell Mellanox ConnectX-3 10Gb SFP+ Dual Port CX322A low profile bracket for Lenovo ThinkStation P330 TINY Desktop PC. I printed quite a few available models and was having different problems with them. So, I ended up just creating one…

Pobrania
61
Polubienia
4
Ocena
5
P
PrintablesNoroNetwork

Screw Mounting Bracket for Ethernet/SFP Media Converter / TP-Link

Tested on : TP-LINK MC111CS WDM, MC210CS It snugly fits my converter which is 72 mm wide, 95 mm deep and 27 mm high. No supports needed if your printer has no problem with bridging. SCALE UP 2-3% to fit without efort. :)

Pobrania
59
Polubienia
8
Ocena
0
P
PrintablesKeepy

SFP Container

8 / 4 Capacity container for SFP modules.

Pobrania
58
Polubienia
8
Ocena
0
P
PrintablesDMD

SFP Tray magazine

Wall mountable stackable trays for SFP modules

Pobrania
58
Polubienia
14
Ocena
0
P
PrintablesPaulg087

SFP Puller

I got tired of trying to squeeze my fingers into tight racks with cable management trays to pull out SFPs, so I designed this puller to be able to reach in and grab the latch and pull the optic out. I also designed a thin flat on the…

Pobrania
57
Polubienia
8
Ocena
0
P
PrintablesMr. Hrundeel

10" inch rack mount for "ienron 4*2.5G + 2*sfp+" switch

Needs some finishing with a file - it fits tightly, I hammered it in by hand. You can't just get the switch out later. The landing hole is 160mm x 32.3mm. The hole is d=10mm for the power cable. Printed in PETG (infill 20-100% - there is…

Pobrania
57
Polubienia
4
Ocena
0
P
Printablescm0x4d

EdgeRouter SFP DIN Rail Mount

DIN Rail mount case for Ubiquity EdgeRouter SFP

Pobrania
57
Polubienia
7
Ocena
0
P
PrintablesIxman

SFP+Port (Mikro Tik) Cap

Protectic Cap for Mikro Tik SFP+ Ports Printed in Flex (TPU) might also work in PLA, but not tested Printsettings: Prusa Mini 0,6 mm nozzle Profile: Detail 0,2 mm layer height Filament: TPU (Saint Smart Profile)

Pobrania
56
Polubienia
12
Ocena
0

SFP module vase mode box

SFP module. Use vase mode printing.

Pobrania
54
Polubienia
6
Ocena
0
P
Printablesguidosenff

Tall backplate HPE Ethernet 10Gb 2-port 560SFP+ Adapter

My HPE Ethernet 10Gb 2-port 560SFP+ Adapter came with a small backplate and I needed a tall one, so I modelled one in 3D. Note: I printed this model and I am using it, but I did not put a lot in effort in refining and optimizing the…

Pobrania
53
Polubienia
4
Ocena
5
P
PrintablesHeavyMetalGuy

6 SFP Box

I took Jet0JLH's great design and modded it to keep 6 SFPs safe.

Pobrania
51
Polubienia
2
Ocena
0
P
Printables0rqa

Full hight PCIe bracket for Inspur YZCA-00431-102 | Dual 10gbe sfp+ network card

Full height PCIe bracket for Inspur YZCA-00431-102 network card Heavily modified remix of this model

Pobrania
48
Polubienia
1
Ocena
0
P
PrintablesAndré Düwel

ItsFPV ERA rear bumper for Vifly Finder 2

Printed in TPU with 30% infill and an slim tree supports on build plate only (see images).

Pobrania
48
Polubienia
7
Ocena
0
P
PrintablesMilhooz

Potron Yunvo 10G SFP+ XGS PON Stick Fan Mount Cooler

Remix of the model by Exen to have less air gap for the smaller heatsink and make it compatible with PDC004 USB C board

Pobrania
48
Polubienia
5
Ocena
0
P
PrintablesPichon

Sodola 8x2.5G + 1x10G SFP Switch 10-in Rack Bracket

A 1U bracket to mount a Sodola 8x2.5G + 1x10G SFP Switch in a 10-inch rack I designed and printed the Skeleten , a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS. From top to bottom: 2U -…

Pobrania
47
Polubienia
9
Ocena
5
P
Printablesteotwaki

HP Z2 Mini G9 PCIe SFP+ bracket

I had a couple of HP Z2 Mini G9 workstations that came with a A2000 GPU but needed to have SFP+ ports available. Even though HP advertises that the chassis is “standard low profile bracket compatible”, this turns out to be a blatant lie.…

Pobrania
46
Polubienia
1
Ocena
0
P
PrintablesGerald85

sfp x2 box

Little range box for 2 optical module transceiver sfp Print instructions Category: Computer Summary Little range box for 2 optical module transceiver sfp Print Settings Printer Brand: DAGOMA Printer: Discoeasy 200 </div> Rafts: Doesn't…

Pobrania
45
Polubienia
1
Ocena
0
P
PrintablesEziloe

HP NC523SFP 10Gb 2-port

Half Height, low profile PCI bracket for HP NC523SFP 10Gb 2-port network adapter Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.20 Infill: 10% Filament: 3D Solutech PLA Silver Metal Notes:…

Pobrania
44
Polubienia
3
Ocena
0
P
Printablesmmusiol

Dust Cover SFP/SFP+

The insertion part is cone-shaped, so it will always fit

Pobrania
43
Polubienia
2
Ocena
5
P
Printablesswooloose

Lenovo Tiny Bracket for Mellanox ConnectX-4 CX4121C SFP Card

A bracket for the Lenovo Tiny computers that is made to fit on the Dell CX4121C Mellanox ConnectX-4 SFP Card. The bracket was printed with the internal part facing down so that the hexagon holes would look a bit cleaner once the supports…

Pobrania
42
Polubienia
4
Ocena
0
P
PrintablesPotato Stardust

SFP Port blocker

Used to physically prevent the insertion of an SFP module into a SFP slot. The blocker fits all the way in. The thing does not lock and can be remove somewhat easily. Mostly used to prevent people from plugin in an SFP in a combo port…

Pobrania
42
Polubienia
3
Ocena
0
P
PrintablesShadow

SFP Mag Mk1 & Mk2

I use a lot different SFPs daily. Being able to grab a few and go makes my job easier. This model allows me to organize SFPs to make them easier to find and allows me to quickly grab a few without having to open any packaging. SFP Mag…

Pobrania
41
Polubienia
4
Ocena
0

10 SFP holder

The SFP transceiver holder is a good print to choose if you want to keep your transceivers safe from dust and dirt, the SFP holder can also be printed in numbers to organize your multiple SFP transceivers

Pobrania
36
Polubienia
3
Ocena
0
P
Printablesmariospinaci

Ikea Skadis - Ubiquiti EdgeRouter X SFP stand

Support to be able to hang Ubiquiti EdgeRouter X SFP stand. Print height 0.2 also it is recommended to add custom print supports for the hooks behind.

Pobrania
36
Polubienia
3
Ocena
0
P
PrintablesTitafubaki

SFP Slot Cover / Plug with Tag

Print as orientated without supports.

Pobrania
35
Polubienia
1
Ocena
0
P
PrintablesMaco Maco

ItsFPV ERA Vifly Holder

Vifly 2 holder for ERA drone, mouted to the back part of frame. Printed in TPU 95A.

Pobrania
35
Polubienia
3
Ocena
0
P
PrintablesDelph

HP NC523SFP FULL HEIGHT PCI-E BRACKET

Full height brackets for HP NC523SFP 10GbE nic recommend using a resin printer, but i have added a flat sided bracket if you want to print it sideways on a FDM Category: Computer

Pobrania
35
Polubienia
6
Ocena
0
P
PrintablesAndrew Yong

Mini SFP Media Converter Enclosure Tube

A simple and tiny enclosure for a [mini SFP to 1Gbps RJ-45 media converter from AliExpress (SFP only PCBA variant)](https://www.aliexpress.com/item/1005003671214339.html). Print upright: * Tube enclosure - print in model orientation *…

Pobrania
33
Polubienia
3
Ocena
0
P
PrintablesTheo164

Olympiacos SFP

Dimensions: 20cm diameter 4cm tall (~2cm white, ~2cm red) Filament change @ layer 11 (0.20mm layer height) Print settings: anything you like, white and red filament only!! Few words about Olympiacos emblem: Olympiacos SFP (Olympiakos…

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesGerald85

8 SFP box

8 SFP box

Pobrania
32
Polubienia
5
Ocena
0
P
PrintablesMockab

IKEA Skadis SFP module holder

Quick little model to hold 12 SFP modules on IKEA Skadis pegboard

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesEmjay

Sfp - USB Holder

Made this holder to keep my OS image USBs and spare Sfp modules secure and to hand. Works well for fibre module, the rj45 modules need more space. I printed mine @ .25mm and on a Prusa Mini it took 7 hrs Came out well in PETG Print…

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesF.L.o

SFP / SFP+ dust cover with printed springs

Designed for a 0.4 mm Nozzle Turn on "Extra Permimeters on Overhangs" (Prusa - Slicer) for the 1 mm Overhang!

Pobrania
31
Polubienia
0
Ocena
0
P
PrintablesGargamel

itsFPV ERA 5 Vifly 2 buzzer mini

I printed it with TPU 95a

Pobrania
30
Polubienia
3
Ocena
0
P
Printableskwinsch

Passive SFP+ Module Cooler

Backshell for a passive SFP+ module cooling solution. The model has to be tolerating temperature up to 80 °C. After prototyping with PLA, I ordered the model with reinforced ASA. The SFP+ extension is from 10Gtek (…

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesMultiX3D

Dust cover for LC connector/SFP Module

Dust cover for LC female connenctor on for SFP modules This dust cover is for the for LC Connectors which are located on SFP/SFP+ modules. I made it with rectangle clip so it can hang on those SFP ports/modules and you won't loose them. I…

Pobrania
29
Polubienia
3
Ocena
0
P
PrintablesTemocMeza

SFP Holder - Gridfinity

A simple holder for all your SFPs.

Pobrania
26
Polubienia
3
Ocena
5
P
PrintablesAW

Generic SFP Media Converter Case

No support needed, just have it print on the faces. Will fit together. I have already added a 0.1mm space to the cover so it most likely will not need horizontal expansion to fit.

Pobrania
25
Polubienia
0
Ocena
0
P
PrintablesDave Corder

Sophos Expansion Module for HP 530SFP+ NIC

I have a rather niche situation where I want to use my recently-purchased Sophos XG 230 Rev 2 1U rack-mount firewall (with OPNSense installed) with my Comcast XB7 gateway in bridge mode, which has a 2.5 Gbps RJ45 network port on it. The…

Pobrania
25
Polubienia
1
Ocena
0
P

10" Rack Xiaomi 10g SFP+ SW-106T-A

I needed a 10" rack mount for my router. 👍 The router press fits straight into the print. I needed to remove front feet 💪 I suggest PETG, but i made one with PLA that held up fine until i printed one in PETG. No supports needed. I…

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesColin

RJ45 & SFP Dust Cover

Prints horizontally for best strength. Should print alright with any filament. I recommend using no infill and at most 2 shells and 2 top/bottom layers. Print multiple at once such that the layer time is not too short. The design was made…

Pobrania
25
Polubienia
4
Ocena
0
P
PrintablesArek

Mikrotik SFP+ broken hinge fix

Hinge broke in release mechanism in my SPF+ module. This fixes that Used M1.6x4. Note that the fix adds a lot of bulkiness to sides of the module. It might be not possible to place such fixed module in middle between other SFP+ modules in…

Pobrania
25
Polubienia
8
Ocena
0
P
Printables_luc

Cage for 12 SFP+

When swapping switches, use this cage to store the SFP+ in an ordered manner

Pobrania
24
Polubienia
1
Ocena
4
P

SFP+ keystone insert

I upgraded my network to 2.5G and the switch had a SFP+ 10G port. I have an Ethernet connection through the wall with 2 keystone wall plates. I made this insert to capture my 5mm SFP+ cable and pass that through after removing the 2…

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesW1T3C

8 SFP holder

8 Sfp inserts holder

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesMixmeister

Ubiquiti ER-X-SFP 19-inch Rackmount modular

Remixed this to make it fit a 19" Rack, adapted mount from @Mauker you can use the mounts side by side, ore use some of @Mauker's modular Parts 3x M5 screws 3x M5 hex nuts. Thx munkulus @Mauker

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesTfourJ 3D

GPON SFP Module Case

GPON SFP Module Cover Protect your GPON SFP modules with this custom-designed 3D printable cover. It provides a snug fit for standard GPON SFP transceivers, shielding them from dust, accidental contact, and physical damage. Ideal for…

Pobrania
20
Polubienia
0
Ocena
0
P

Lenovo ThinkCentre M910x PCIe Bracket for Mellanox ConnectX-3 dual QSFP+

Mellanox ConnectX-3 dual QSFP+ PCIe bracket for Lenovo ThinkCentre M910x and ThinkStation P320 Tiny. Use a bit of force to tap the screws.

Pobrania
20
Polubienia
2
Ocena
0