Wyniki wyszukiwania: shack

Shackles, handcuffs, chains

Box for the PhysicsHack Vortex Dome

Fitted box for the PhysicsHack Vortex Dome: https://physicshack.com/product/vortex-dome/ Print instructions Print with PETG using Archimedean chords as top and bottom fill pattern, and no skirt as it barely fits on the i3 MK3S platform.

Radio Shack - Scientific American Thermometer holder

Our base unit thermometer that we have had for years broke the stand that keeps it upright. I designed a simple model with PLA I had around.

Nose shackle (bondage)

Plastic is not very strong, but when it is attached, there is no leverage to break it, so it is secure enough. For printing use 100% infill and 0.1mm layer height. Numbers in model names are clearances. Cover part is designed to be…

Bumper shackle for Traxxas TRX-4M (TRX4M)

A simple shackle for my Traxxas TRX-4M Defender bumpers. Printed in resin and painted. Paper clip can be used to be pressed in to fasten it to the bumpers. Drop of glue might be needed at the ends to secure the paper clip in (I did not…

Paracord Bracelet Shackle

Designed to be printed flat without support. Picture is with 6 strands of #275, 3/32" (2.3mm) paracord, but 4 strand of standard #550, 5/32" (4mm) should fit well too.

Modular Chain & Shackle Set (Hands, Legs, Neck)

Modular 3D printable model set, which allows you to create authentic chains and shackles for hands, legs, and neck, perfect for a wide range of cosplay creations. Whether you're embodying a fantasy, sci-fi, or historical character, this…

Ho scale small shack or cottage

Print in resin for the best results. I also suggest supporting it instead of printing it to the build plate. You will need to support the rafter tails and the inner rafters as well. Good luck.

28mm Wargaming Timber Shack Building

This is a model timber building designed for 28mm wargaming, however it can be scaled so would be great on any type of scenery layout. I am creating many free models and also sell some more elaborate models on my website in my digital…

Fursuit Shackle

Inspired by @74TOFU's fursuit shackle prop, I created this model from scratch and added some improvements. Cuff diameter is 72mm. Measurements were made specifically to be worn over my fursuit arm paws. Prints with 0.2mm layers. Supports…

Kali River Rapids Shack - Jungle Navigation Company (HO/H0/1-87 Scale)

Inspired by the streets of Anandapur in Disney's Animal Kingdom at Walt Disney World, this shack usually marks the entrance to a harrowing trip through the Kali River Rapids. It has that amazing lived-in feel that the rest of the park has…

Handcuffs, shackles with a large chain

I liked these handcuffs, but I didn't like the small chain. So I found a bigger chain. The hook in the handcuffs turned out to be too small for such a chain, so I increased it a little and everything turned out perfectly.

Print In Place Hinged lock for padlock or D-shackle

I designed this nice remix for a project to lock a crate with a padlock or D/CLP-shackle. I added my source files (.ipt) so you can make adjustments if needed. The geared hinge is a print in place part only support needed for the cut-out.…

Tuckbox inserts for Shackleton Base corporations

A set of inserts that can drop into the included tuck boxes, which will also function as holders for the resources etc. The main aim was retaining the original tuck boxes while at the same time increasing their strength, and making them…

Snap Shackle

This snap shackle is good for light duty rigging and can be scaled up in size. 200% was a useful working size for me. Materials: Printed parts Spring - The size depends on the width of the gate pin, the spring should slide onto the narrow…

the mystery shack

its the mystery shack from gravity falls

SHACK UNDER CONSTRUCTION HO SCALE

This model is to represent a small out building that is under construction. It is printed with Prusament PLA. Print the structural elements in the color filament that represents new lumber. The roof rafters are simply glued at the roof…

TRX4 2021 Bronco Bumper Shackle Mount

A shackle mount for use with the original shackles that came with the TRX4 2021 Bronco. Simply remove the tube bumper part and mock winch, and bolt these on using M3x5mm button head screws. Interested in our RC crawler bodies and…

Shackle for Gravity/Grappling Hook M4

I didn't want to buy a whole set of shackles for the hook, so I just designed one to use with a M4 Screw. I printed it with PETG and 100% infill for extra strength, but you could definitely get away with using PLA. I used a M4x20 screw I…

REMIX Paracord Bracelet Shackle - Captive Pin

Paracord bracelet shackle with a counter bore that retains the pin.

Shackleton Base Insert

This is an insert for Shackleton Base. The personal Player insert was designed to fit Clownfeet's design of the 3D domes. His design can be found on Thingiverse or Makerworld (I painted his file and gave him credit). Clownfeet's 3D Domes…

28mm Wargame or model railway timber framed Shack outbuilding

This is a model timber building designed for 28mm wargaming, however it can be scaled so would be great on any type of scenery layout. I am creating many free models and also sell some more elaborate models on my website in my digital…

Guard Shack Playset 1/18 scale

This 1/18 scale Guard Shack playset is one of the first things I designed. Fun little playset for G.I. Joes and other 4 inch action figures. Every military base playset needs a guard station right?

Crab Shack Fairy House

🦀 Crab Shack Fairy House – Undersea Magic with a Pinch of Whimsy! 🐚 Welcome to the seaside sanctuary where fairies vacation! The Crab Shack Fairy House is a delightful blend of coastal charm and fantasy fun, designed to look like a cozy…

D shackle

I wanted to add a little pizzazz to my truck but did want to spend the money to add these shackles that might just get stolen! And the best part you can print in any color you like or to match your needs! DO NOT USE FOR ANYTHING BUT…

Radio Shack Logo from the 1970s-1980s

For those of us who remember Radio Shack growing up I wanted to make a logo to be a shelf or desk decoration as a reminder. It does not include any hangers, stands, or legs only the logo itself.

3/8" SCREW PIN ANCHOR SHACKLE

3/8" SCREW PIN ANCHOR SHACKLE

Stronger Abus Granit XPlus 540 shackle lock bottle cage holder

Update 17.07.2025: New Version added. Better printing gcode. Fits better. Original is broken. New Verion: Stronger and more aerodynamic. At least 4 layers above, below and walls. At least 25% infill. I put felt tape on the inside of the…

modified carriage for Fully 3D Printed Heat Set Press using Radio Shack 25 watt iron

Modified carriage for Fully 3D Printed Heat Set Press using Radio Shack 25 watt iron cat no: 64-2070C. This iron has a triangular body shape. I left part of the original 19mm round opening as it helps with some relief for the odd RS body.…

Radio Shack Sign

I have fond memories of what Radio Shack used to be as I was growing up. I spent a lot of my allowance and any other money I could earn on electronic parts, kits, tools, etc. I wanted a reminder of those days in my office so I created…

Shackle and shackle flat mini.

A small shackle with 3d printed locking pin and a smaller shackle. Bigger shackle has ID of 25mm and fits around a quarter. Reposition body to lay flat and print without support, loaded properly can hold over 100lbs at 20%infill in PLA.…

Lego Compatible (55707d.dat) Minifig Shackles

This model is compatible with the lego system.

scale towing shackle

The model can be scaled up easily in your slicer. If you have some you can use gift ribbon to make tow straps.

Caddyshack - 1980

Caddyshack - Rodney Dangerfield - 1980 3D printable model. Super easy to print!

Unshackle my heart (puzzle)

Based off of a puzzle I remember solving as a kid. Print the bar first. When printing the shackle, the long side should be on the plate, with the loops pointing upwards. Pause the print when the loops are still open, and place the bar…

Ramshackle Dorm Charms - Twisted Wonderland - MSLA

Ramshackle Dorm, once abandoned and haunted by ghosts, now inhabited by MC and Grim! Charms for Grim and an UNOFFICIAL design for the Main Character Models are 65mm in height. Scale them smaller for earrings or bracelet charms. Printed…

The Owl House Shack

This is a model of the abandoned house where the portal connects to from The Owl House. Length Width Height 36.4mm 34.3mm 35.1mm Print Instructions Printed at 0.1mm layer height. Does not need supports. If you want to support me, you can…

Mall Rated 0 ton Shackle

Do your friends drive Jeeps that haven't so much as seen a dirt road? Swap out their fancy recovery shackles with one of these! They'll never miss it! I suggest splitting the shackle into two pieces to print, and then gluing them back…

Radio Shack TRS-80 mod I

My firts microcomputer in 1979.... a passion.... This is only a remix to print all parts together. I printed on a 150% scale. Category: Scans & Replicas

Soft shackle rope pulley for up to 6mm rope

Video link Soft shackle rope pulley for up to 6mm rope This pulley was designed for low to medium operational loads, but will hold the rope up to the breaking strength of the soft shackle that was used in the assembly. Use 3mm dyneema…

Valentine's Day Kit Card House, The Love Shack

A Valentines Day Kit Card house inspired by the work that Nakozen Does. This one is a bit bigger than the Christmas card house and I really like the way it came out. I added a to and from so you can fill it out and give it to your special…

Quick Release Snap Shackle

I needed a quick release shackle to allow my students egg droppers to drop easily from a beam hanging from the ceiling. The latch can print with no supports or brim. The main body needs to be printed with supports everywhere (would block…

Shackle Hoist Ring

Working Shackle Hoist model with removable pin, created to aid in printer part design changes. Step file included

D Shackle Tightening Wrench

This compact shackle key is designed to help you securely tighten your shackle pin, ensuring it stays firmly in place and won’t loosen over time. Commonly used on sailing yachts to fasten rigging and secure equipment, it provides extra…

Shackled - Krampus Can Holder Collection

Krampus can holder Collection - Shackled Krampus Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz or 330ml (slim) cans (link below) Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, brim,…

Abus Granit XPlus 540 shackle lock bottle cage holder

A shackle lock holder for Abus Granit XPlus 540 that mounts on the bottle mounts. 63mm between bottle mounts +/- 5mm. Fit is tight and avoids too much wiggling. Had great results printing: vertically supports only on the inside part using…

JEEP 1941 3/4" D-Ring Shackle Bumper

A custom shackle bumper for Jeep Wranglers or Gladiators, with " 1941 " inlay. The main body should be printed using either Nylon, TPU or Onyx (nylon/carbon fiber) material. This will give you some flexibility to get the bumper around the…

Shackle Mount Plate for 3DSets Bamboo4x4 Rear Bumper

This is a mounting plate for shackles and other accessories with a 10x10 mm bolt pattern. It reuses the original mount points of the Bamboo4x4 rear bumper pieces. Hex nut cutouts are for M2 nuts (4mm socket). I've printed the part with…

Hoist made from a shackle

To build this hoist, you will need: 2x 14mm straight shackle 6m (or more) of 6mm rope 6 pulleys to be printed in a very strong filament, I used Iglidur C210 2 rope holder (optional, not on the image) 4 rubber band to close the rope…

Spellbound Shack

Bring a little magic to your shelf or terrarium with this whimsical Witch’s Cottage. Featuring a tall, hat-shaped roof, arched doorway, star-window detail, chunky chimney, and cobblestone base, this miniature house looks like it popped…

YATFS_TackleFromShackle

Tackle to increase your lifting strength This tackle is designed with the idea that if the plastic parts break, you should not drop what is being lifted. And of course you can modifie my design easy by downloading *.3df file. Safety This…

1990's Radio Shack Logo

For those of us who remember Radio Shack growing up I wanted to make a logo to be a shelf or desk decoration as a reminder. This logo is from the 1990's, it does not include any hangers, stands, or legs only the logo itself.

Kryptonite Mini-5 U-Lock Shackle Clip / Frame Mount Bracket Upgrade

An upgraded, high-durability replacement shackle spline clip designed specifically for the Kryptonite Evolution Mini-5 U-lock. The stock aluminum spline connector is famously prone to loosening, causing the lock to vibrate loudly, rattle,…

Radioshack RC Car Tire & Rim Assembly [FREE]

Rim is designed for ABS Tire is designed for TPU. I printed mine with 5 outside layers and 30% fill (which was probably a bit excessive) 0.2mm layer height. Rim slides into tire with a bit of persuasion. Feel free to glue in place. These…

Cryptid stone and shack tokens

Replacement of the wooden tokens to indicate the standing rocks and shacks. Also included are disk and cubes, if you want to replace one of the light blue colors, which are hard to differentiate on the map. Sources for remix:…

Shack scale 1/54

Be careful with the corrugated sheets, they are 0.5 mm, very fragile. Printed all at 0.05 or 0.07, nozzle 0.25.

Hitch with Mall Rated Shackle

No supports needed, just trim the tabs on the hitch plug when complete! This is not meant to be structural, but hey post up if you do some pull test with. Im guessing it wont be good due to layer line issues….

Transformer Shackle Chain (Print in Place)

There are 2 types of chains. V1 and V2. The difference is the placement of the chains coming out of the cuff. It should fit most models. Printing: Print with 50+% infill so you don't break them. Print without supports, Brim is ok.

Paracord shackle with adjustable width

Supplement to adjust the width of the bracelet with the shackle from mobiobi. Download the shackle at mobiobi directly. The extension can be printed without support and border. Preferred material is PETG or PC

Toyota Landcruiser J200 shackle box

If you are using access to 3rd row only from right side of the car you can use step on the left side for this box. Store shackles, straps or other items here. Use velcro tape for attaching box into the place.

Guard Shackle

Did it from PETG. 02, 20% infill As this item should withstand marine environment I wish I could use Nylon instead.

Snap Shackle base with modified hinge area

The long pin… should be on an angle to hook the gate into the closed position like this one https://www.printables.com/model/193865-quick-release-snap-shackle I tried using a spring from a pen, where else can I find a spring easily?…

Shard Shack Watchtower Terrain - The Eightpints The Chamuscado Glass Wastes

Now, that’s an improvement. The low building gives you a solid base, but the two tiers mean you can spot trouble coming from miles away. That watchtower perch is key for your marksmen or for spotting any Glassen Wing Vultures circling in…

Radio Shack Golden Arrow Shocks with Shock MountRepair Sleeves

Rear Shocks for Radioshack Golden Arrow, Sagitta I made these for my Radio Shack Sagitta, but I think they fit Golden Arrow and maybe other Nikko buggies. These are the rear shocks with the offset angle with the longer shock mounts on the…

Battery Cover RadioShack Ricky Carmichael RC Motorcycle

Battery Lid for the Honda CR250R Motocross Bike Featuring Ricky Carmichael RC Motorcycle RadioSack Model 60-4353 Want More Free Designs? Like and Comment! If you enjoy this design, please leave a like and/or a comment. It keeps me…

Door knob shackles

A rather simple "lock" to keep pets out of my closet. The dumb cat learned how to open the door but doesn't know what he wants inside. Now he does it for fun every night. Highly recommend printing at 0.5mm height and modifying the f3d…

Dock Shack

Dock Shack for your TTRPG

Hermit Crab Shell Shack

Large dish for staring hermit crab shells to keep them from getting covered in sand. Approx. 220x127x51 Recommend using PETG due to the high humidity typically found in hermit crab tanks.

Triangle Pull Handle Remixed for shackle with "Emergency Anchor Release" text

I just added the "Emergency Anchor Release" text deboss, and scaled down to 60%, identical otherwise to the original.

Spring shackle WPL C94

Increased spring shackles for WPL C94 UAZ-469. Also suitable for other WPL models. (SolidWorks 2020)

Gamepad case for Radio Shack's Make: it Robotics Infrared Controller

This is a gamepad case for my Radio Shack Make: it Robotics infrared remote controller (Amazon) (Radio Shack #2770168) The buttons are labeled to be used for an Arduino rover with an ultrasonic sensor and three servos. So it moves the…

Dog Poo Bag Holder - Bumper Winch Fairlead With Shackles - No Supports

Fun little Dog Poo Bag Holder Prints easily in separate pieces and glues together Prints with no Supports, Just place logically on the print bed. I used small offcuts of filament to mount the shackles in the holders. It is a snug fit on…

Abandoned Shack - Bookmark

Dimensions: 180 x 54 mm. Only one colour swap required! For those with BambuLab machines, the included 3mf file has an AMS colour swap included. If slicing yourself: 0.08 layer height recommended, will work with others when the swap is…

Pipe hanger shackle - flexible

meant to secure a 2.5 - 3 inch diameter pipe or object using a carabiner and paracord to lock it down.

Vitrified Shard Shack Sheet Wagon - The Eightpints The Chamuscado Glass Wastes

That's the sad end of a caravan. A Shard Shack that didn't make it, the wagon now permanently vitrified into the cracked, glowing glass. It’s a monument to the Sinking Sands. You see the little pieces of coin scattered around? The fool…

RadioShack Soldering Iron Holder Endcap for Pinecil

Got a Pinecil V2 recently but found that the RadioShack Soldering Iron Holder/Cleaner combo didn't fit the Pinecil, so I decided to create an end cap that's essentially the same design as the original but it's designed to fit the Pinecil…

Retro Hack Shack Kung Fu Flash Cartridge Case

A case to be used with the version of Kung Fu Flash cartridge found on retrohackshack.com/shop. It has been customized and improved over several other cases I have found online. The style of button was inspired by hackup version on…

Kali River Rapids Shack - urne de mariage

Remixée pour l’utiliser comme urne lors de notre mariage sur le thème « tropical »

RadioShack LCD Game Display Shelf

This is a shelf for displaying 4 RadioShack LCD games. It's around the same height as a CD jewel case or gameboy box. RadioShack-Cradle.stl - The part that holds the games. Print with 3 walls, 0.4mm wall thickness, no infill .…

Soft shackle block

3d printable sailing block/pulley Uses a soft-shackle and 6203 bearing My soft-shackles are 60cm of 2.5mm dyneema. Printed for testing in PLA and tested as shown in photos, I don't have any numbers on how much it can take but it was quite…

Ulock Shackle Holder with a twist

Made the shackle holder have a weirdly specific twist in it (which I did backwards at first, hence the two different ones in the photo) so it'd hold the shackle to the leg of my rack (with the top of the lock held by its own mount).…

Radio Shack Electronic Chess Pieces

These chess pieces were designed to be used in one of those old Radio Shack or Tandy electronic chess sets.

Shard Shack Terrain - The Eightpints The Chamuscado Glass Wastes

That's a Shard Shack. Not much to look at, but it's a testament to stubbornness. It's a home built out of the last salvageable corrugated iron and wood, a miserable fortress surrounded by the very Obsidian Shards that want to cut it down.…

Ham Shack Door Sign

This is a office door sign for your Ham Shack. 0.2mm layer, 2 walls, 15% infill

Shackleton Base insert (work in progress)

A series of four trays for the player pieces - plus two identical trays for the money

Strong Pulley with modified eyelet (for shackle)

A fully printable pulley with an extra eyelet to add something else if needed.

1:10 scale D-ring Shackle for SCX10

The shackle holes are symmetrical 2.4mm and not threaded. I printed in PLA with 0.20mm layers and the screws threaded securely with no other preparation (I oriented them opposing directions for each side).

D Ring Split Shackle V2

Small improvement over the first version. Note: not compatible with original.

Warn Epic Sidewinder Shackle Pin

For the Warn Epic Sidewinder shackler, you can purchase an Isolator to protect the pin from being damaged from rocks or other road debris. I was about to make one to 3d print and figured it would be nice to keep the OEM pin with my winch…

Radio Shack Red Arrow Buggy wheel set

Overview I made this model when restoring my Radio Shack Red Arrow Buggy. All parts are hard to acquire for this old buggy. Tires wear out and replacements aren't available. Some people switch out the wheels for other more-common wheel…

Mystery Shack Sign

This model gives of a complete feel for the mysteries Gravity Falls holds...

FMS Mashigan longer shackles

Longer shackles for FMS Mashigan with leaf-springs kit. The way the leaf-springs are designed, you either end-up with a lowering kit if you go axle above or a high-heels kit with axle under ... Easiest way to correct the lowering kit is…

Ernest Shackleton Bust

Ernest Shackleton Bust STL is a historical soldier and explorer figurine model for collectors and 3d printing fans, featuring the Ernest Shackleton Bust design as a display-ready sculpture. Ideal for desktop decor, history-themed…

TS100 Adapter for RadioShack Solder Stand

I really like the RadioShack branded soldering iron stand that I have. Unfortunately, the stand was designed to be used with a larger soldering iron and the TS100 that I have right now didn't fit well. I removed the plastic cup that the…

D Ring Split Shackle

Print two pieces, join with M2 bolt (and nut, if needed)

Game Boy Color Backlight Mod Spacers (Freckleshack/McWill)

FS_Spacers should work on any Freckleshack style screen that does not use the PCB for locating the LCD within the shell. Specifically this means Freckleshack or the new backlight kit from China with the touch sensor backlight control.…

VOM Multitester Case for Radio Shack 22-204 & 22-214 meters

Sliced and diced the bottom and lid in 3D Builder to fit the Radio Shack 22-204 & 22-214 meters. Removed FLUKE logo. Used 4-40x1-¼ inch screws, Cases are PETG and latches are PLA.

Radio Shack Multimeter New Housing for Banana Plugs

New housing for the Radio Shack 88-210 Multimeter. Uses female banana plugs from Amazon. This allows for removable test leads and the use of various types of test leads. It will also need some 12mm long m2 screws for installation, the…

Cool shack.

A little shack.

Mystery Shack Backwards

Just print and hang on your wall for all your friends/neighbors to see.