58 modeli
Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This profile is inspired by a large number of other high speed/bonkers profiles for the Mini and the Mk4. I tuned this for use with PETG, since that is mostly what I print in. But, I have tested it with some of the PLA filaments I have…
Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…
A small test print that i use to evaluate the extruder accuracy and vibration of a printer. used for tuning extruder settings as well as input shaping / ringing compensation. it can also be used to test the quality of filament (for…
Input shaping test print for markforged kinematics. Follows the movement correctly to isolate steppers.
This is a simple remix of a remix - because I love heatset inserts. Credit to Anatoly Kharkov for the ingenious dual purpose clip/mount design: Fits both the X and Y axes for the Ender-3 V3 SE The clip is a nice secure fit on the bed Easy…
Inspired by the OREA Negotiator filter press tool, this model is designed to allow you to press your coffee filter into place for the ‘no-bypass’ method of pour-over coffee brewing. The general conical shape and central stem are about the…
This is a tool used to guide in shaping up your hair line and beard using clippers or even a razor. This design is based on The Cut Buddy which I purchased a while back on Amazon. This was designed in Fusion 360 and I also included a…
As you know Prusa Mini finally got Input shaping (ALPHA). It works fine on some of the printers but others get an X Homing error. I Tried couple of things but adding C Clip to the x axis worked. Tightening the X axis belt also worked, but…
Created for simpler prints when you have problems with bed adhesion for the comb part of the original.
Shaping disk modeled to fit perfectly any Philips Pasta Maker Viva Collection. Mine follows the default 4-hole pattern which is rare for other similar models I've seen. Be sure the printer has the wall flow calibrated, try to reduce…
Trim your beard precisely and with style for winter times. See https://www.thingiverse.com/thing:1805384 for usage instructions. For shaping the snowflakes you need a electric razor with a thin head. Print instructions How I Designed This…
Benefits of this design: 1. ADXL components protected from shorting against mounting bolts' heads & nuts. 2. ADXL components protected by walls from shorting against filament knob. 3. ADXL securely sandwiched in place giving it a very…
A small jig for holding a 4/4 violin bridge blank. The blank is safely wedged in place. It has a stiffening structure on the underside, but prints without supports nonetheless.
Description: This is a professional-grade beard shaping tool designed for men who value precision in their grooming routine. Featuring a built-in comb and precise measurement markings, this template allows you to achieve perfectly…
A shape up tool used to line your hair or beard. Very inspired by The Cut Buddy. Category: Accessories
Snapmaker J1s input shaping tune wizard have a bug - not saving picked values. (FW 2.7.1) https://www.facebook.com/groups/snapmakerj1/permalink/1112429939797317/ To tune input shaping this model created. Why? There is a standard Ringing…
The branding text on the top has been removed for ease of printing. A tool designed for the Orea Brewer - to help you shape and fit flat circular filters, conical filters, or trapezoid filters into the Orea Brewer or other flat bed coffee…
4 designed and printed pieces placed in a base. These are pieces for rotating ceramics, and are used to give a jar the geometry of the design profile. Each piece has two profiles. In the attached image you can see the result obtained with…
This is a FLSun SR anti vibration resonance sensor (klipper input shaper) holder. I use the sensor/holder from/with the Creality Sonic Pad and Klipper. My other FLSun SR upgrades for high printing speeds are bimetal hotend, original…
Apple airtag for shaping the leather case Print the part twice and glue together. In the middle of the part there is a small reservoir for excess glue. Example of use. 1. Make a leather case 2. Print the Airtag dummy 3. Put this model in…
4 + perimeters otherwise it will have a hole inside wich can snap the model
A range of custom FCS style surfboard fin plug to fit the original FCS type plug fins. Measurements were taken from some spare plugs that I have sitting around from a previous board build. I have uploaded a range of commonly used cant…
I have a Dremel "shaping platform" and wanted to use it with my Proxxon micromot. So I designed an adapter for it. The adapter is basically a collet that fits th 2 cm collar of the micromot. Print instructions Category: Hand Tools Summary…
Quick & Easy Pubic Hair Shaping tools – Choose your style, press the template in place, shave the excess, and you’re done. You can adjust the size in the slicer. Works with PLA or PETG — no supports needed.
This tool allows you to restore the shape of a bent ring. To use it, first place the ring on the conical piece, then attach the other piece designed to press the ring back into shape. For better control over the applied force, you can…
See original instructions - they are fine.
These drill guides are used to drill the holes in a Powerbox fin in order to convert it to Tuttle or universal. They are meant to help when using this adapter. https://www.printables.com/model/491976-powerbox-to-tuttleuniversal-converter…
I used this for my MMU3 setup with an 0.6mm nozzle. You can get the custom g-code out of the Layer-End Section. Follow the original steps, use this equation to solve for your frequency: 15 * [ (1 + (5(z) - 2) ) / 99 ]
The mountig holes are for 3Ms heated inserts and a short m3 screw for the hot swap mounting point. Just slide the Case with the sensor underneath the screw and tighten it down. i also used a long m3 screw for stabilizing the Bracket for…
A selection of surfboard plugs for attaching a surfboard leash to a surfboard. The _thin file totals 13mm depth, while all the other ones have a depth of 15mm. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2…
Made this for foam armour shaping in cosplay. Super handy. Make sure to make it strong with a good wall thickness so you can beat it up :) Files to edit if you want a different shape.…
This is a quick design I came up with to mount the LIS3DH from Adafruit to an 40mm axial fan. https://www.adafruit.com/product/2809 Just print it and mount it to your hotend cooling fan using 2-4 M3 screws. You can attach the…
Opis PL Urządzenie do formowania i porcjowania potraw , składające się z pierścienia oraz dopasowanego tłoka. Pozwala w prosty sposób nadać estetyczny, równy kształt potrawom takim jak tatar wołowy , ryż, kasza, purée czy desery. Dzięki…
I liked the mount, but my accelerometer did not fit. Instead of resizing, I made a simple add on to the original model so that the BIGTREETECH S2DW Accelerometer can also be used with the Y axis bed mount.
The problem with most beard guides Nearly every beard shaping tool uses the same generic cheek curve. That curve is an average, and faces aren't averages. If your cheek line runs steeper or shallower than whoever designed the tool, you…
With this attachment, you can shape cookies. If you have the MOMV5 mincer attachment, you can use this with it. The attachment is prepared in two separate folders: one is a single piece, but it requires supports to be enabled during…
i know im not going to win this but anyway heres a ghost
Nuevo soporte para montar el acelerómetro de Creality sobre un cabezal del tipo EVA3
Made this mold for making bent veneer hooks. What you need: This mold ( towel_hook_mold_upper_Mk2.stl is available with added groove to easily hook veneer into the mold) Veneer of your choice (cca. 0.5mm thick) Wood glue (Titebond 3 or…
remix of another shaping tool, made the handle a bit bigger with textured finish to eliminate the slot to tighten the butt and gives a bit more to hold onto, added a stencil to trace when cutting out sand paper, added a cutout of text of…
Sistema de sujeción para el acelerómetro, utilizado para medir las vibraciones en la cama de una impresora 3D, con la tecnología Input shaping, el cable debe quedar mirando hacia la parte delantera de la impresora, también hay un soporte…
I tried out a few of the prints but none of them seemed good, and since I only had M3 4mm screws, no nuts, some zip ties and a dream to get this done just today, i decided to design this the bed piece can be zip tied but if you want to…
A three-part set for hand-building small espresso cups from rolled clay. How it works: Roll a sheet of clay to approximately 7 mm thickness. Use the strip cutter to cut the rectangular strip that forms the side of the cup. Use the base…
When snapping a photo (preferably in a dim environment), this accessory will enable creating a light projection of the desired shape. It can be adjusted in length via both included canons in order to better fit the needs.
Tiny funcional shell for input shaping sensor using RP2040 Zero + ADXL345. Files already in correct position to print, no need support screw holes have self-support, you only need remove this self-support with a screwdriver. Hardware: 1x…
the holes for the thermal 2 x M3x4mm OD4mm heatset inserts 2 x M3x8mm machine screws 2 x M3x6mm machine screws Assembly
The Perfect Croissant, Standardized. Making croissants from scratch is a labor of love, but the hardest part for me is nailing the exact geometry: getting perfectly straight edges, maintaining consistent dough thickness, and cutting…
A Pi Pico case with cables out for input shaping with adxl345
Description: This is a professional-grade beard shaping tool designed for men who value precision in their grooming routine. Featuring a built-in comb and precise measurement markings, this template allows you to achieve perfectly…
This is a tool used to guide in shaping up your hair line and beard using clippers or even a razor. This design is based on The Cut Buddy which I purchased a while back on Amazon. This was designed in Fusion 360 and I also included a…
Made this mold for making bent veneer hooks. What you need: This mold ( towel_hook_mold_upper_Mk2.stl is available with added groove to easily hook veneer into the mold) Veneer of your choice (cca. 0.5mm thick) Wood glue (Titebond 3 or…
Here is my solution for a silicone caulking tool. I'm rather satisfied with the results in my kitchen, so feel free to try ! Several chamfer sizes are available (I used 6mm). I believe that this shape design makes it easier to succeed in…
Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
the holes for the thermal 2 x M3x4mm OD4mm heatset inserts 2 x M3x8mm machine screws 2 x M3x6mm machine screws Assembly
