70 modeli
This rain showerhead took several versions to "develop", but now I am showering sice 8 Months with it. The droplets produced by it are very nice and “soft”. You might need some O rings to make a good seal. If the thread does not fit,…
Hi y'all this is my design for the showerhead holder. I looked everywhere but couldn't find anything suitable for me. The base has a single hole for m3 or m4 screws with a generous chamfer. Simply screw the base to a hole on your wall,…
A part for mounting a showerhead on a cylindrical hook.
Updated Oct 26, 2021 - Completely redesigned from scratch to be more durable, retain its sheeting effect for a greater distance, and have a better fitting connector for NPT 1/2" shower connectors used in the US. Folks not using that…
Quick and dirty waterfall showerhead for 1/2 inch threads (most common).
My old showerhead holder wasn't doing its job anymore so I designed one to be 3D-printed. This is designed to fit a 25mm Pipe. It consists of 4 parts, is adjustable and easy to print. No suports needed, no adhesives and no screws, that…
Shower head height raiser which raises the height by 4 to 5 inches. Fit into existing handheld shower holder slot. New slot is higher and helps when shower is installed lower than suitable. Ideal for tall people. An improved 2 stage…
Simple Showerhead for Shower Hose Height: 16cm Print the top as first layer Bottom solid Layers: 5 Top solid Layers: 10 German: Einfacher Duschkopf für Duschschlauch Höhe: 16cm So drucken, dass das Oberteil der erste Layer wird Bottom…
Had this idea for a showerhead with an open handle. Designed in FreeCAD, to learn the application. The bold can print it in one go, but it's easier to print each part by itself and jus glue together with CA afterwards. Print settings I…
This 2-piece ring was designed to fix a cracked showerhead ring fits Gardena irrigation sprinkler type 18311-20 May fit other models The metal showerhead should be removed from the original ring. The base ring goes onto the sprinkler, and…
Simple showerhead holder with 45 degree angle for mounting with double sided tape
Showerhead clamp replacement with adjustable angle (15° per step). Print in place. Use M6 screw and nuts to install.
It prints without supports.
It is a part for the shower head. My bathroom didn't have a showerhead holder in a location I liked, so I made one. Supports are not required, but it is recommended to set the outer wall to 3 for rigidity. When printing is complete, it…
Original design credit to: https://www.printables.com/model/386140-shower-head-holder I tried a few of the original models, but none fit my 24mm rail, or held my particular showerhead very well. Inspired by ThreeDMichael's design, I…
Print it in upward position (thread side down, see last picture), no support, 0.2mm layer hight, PETG. If you have adhesion problems, use a 3mm brim. There are two model files, showerhead8 defaults to 1.0mm nozzles, the other has 1.2mm…
This is a replacement for a broken showerhead holder. I don't wanted drill new holes in the tiles or do a extensive search to find one with the correct hole spacing. So this might not work out of the box for your need, but I included the…
If you want to disassemble Grohe Showerheads, you might want to use this little tool. It should fit the following models: 27130 Rainshower Rustic 160 4-Spray Showerhead 27135 Rainshower Cosmopolitan 160 4-Spray Showerhead 27085 Rainshower…
If you're like me and always remove the Obama/Biden mandated showerhead flow restrictors that bring marxism into our bathrooms, here's a customizable alternative design in FreeCAD which allows you to adjust the restrictor to your liking.…
### English I quickly designed this "shower arm extension" with FreeCAD. It raises the showerhead by about 12 cm and can be nested together. It's meant for those who need to stand under the shower when the showerhead holder is installed…
Copied a broken part of my showerhead holder. Use supports depending on your printer, recomended to rotate lying down for maximum strength. Print instructions Category: Bathroom
🇺🇸 English: Simple wall mount for handheld showerheads. Designed for easy 3D printing and secure fit. Mounts with two screws. Compatible with most standard shower hoses. 🇧🇷 Português: Suporte de parede simples para chuveirinho. Projetado…
Prints really well with .6mm nozzle at .36 layer height. Roughly 55 min on my Ender 3.
Showerhead mount just for hold it while driving
The FlowBranch Showerhead is a uniquely designed shower attachment featuring fixed tubes that distribute water in an elegant, controlled pattern. Inspired by organic branching structures, this showerhead offers a distinctive look while…
Do you have a removable handheld showerhead that you have to crane your head to get under? Does it sit so close to the wall that the back half of your shower is forbidden territory the water doesn't even try to reach? Do you wish you had…
This is a showerhead holder for a 22mm (7/8 in) showerhead. Silicone it to the wall (recommended), or you may also use tape or glue. Printed on a Prusa i3 Mk3S. Happy printing! :)
showerhead holder / Duschkopfhalterung
The showerhead at the clubhouse pool wouldn't aim anymore. I took it apart and found a hard plastic ring that was cleanly snapped. I modeled this in Fusion 360 to replace it and it's been working since. Print is a little stringy because I…
My street has a bad water mainline and we have been plagued with water outages lately. Town contractors are digging a hole somewhere almost weekly. This showerhead is designed for a 12V 2A submersible pump. Stem has ridges to help with…
EN : When I was designing a cap for 20-liter Campingaz canisters, I also thought of a possible application for use as a shower. The repurposed cap is designed for the lower outlet, where the tap, which often does not seal completely, was…
I designed this part to loosely fit over the top trim of my glass shower door and help keep the showerhead hose out of the way when using the wand attachment. This is especially nice for folks who shower together, freeing up a hand that…
The holder for the Showerhead broke for my “GROHE” brand shower holder thingy i remodeld it in cad and printed it on my prusa mini…. Saved me from driving to my department store and having t bua a new one & the enviroment from even more…
PLEASE NOTEL: Print this out of TPU or other similarly flexible materials. I printed it out of 95a TPU and it works perfectly. This is an O-ring seal for showerheads or anything else such as hoses etc. to prevent water from leaking out of…
My showerhead holder cracked which meant the showerhead would fall off unexpectedly while in use. This was not only annoying but bad news for my toes too! Eventually I got fed up, brought out the calipers, and modelled a replacement in…
Our shower had two showerheads. One rainshower and the other only a handshower. Wanted to be able to hang both. So, I'll just print that. Love this hobby!!
The old one broke so I made a new one
Evolution of my previous design. The last one broke, in about two months of usage, due to unbalanced weight, having not too much infill, and slim walls. Also, as we are small people, we needed a bit more inclination to get the water…
This is a replacement of the original part with fewer holes to reduce water usage further. For me the 3 hole version is working great, but it depends on your water pressure. In the picture green is original and pink is the two hole version.
Due to the broken holder for my showerhead, I created a new one.
[24/06/2019] Update: the pin that holds the showerhead, broke off on my print. To fix this problem, I drilled a 4mm hole through the pin and the mount, after which I inserted an M4 bolt for strength. If you are concerned about the…
A showerhead mount for glass wall, the one usually made on a bathtub shower (idk how it's called in english 😅) It's made for a glass thickness of approximately 5mm.
Tilt able showerhead holder for our Grohe Shower, with a somewhat non standard head. The “showerhead holder clamp” fits 20 - 24mm diameter. The screw-on.. thing has a main-bore of 16mm and the lugs with a diameter of 20mm. The clamped…
Shower head mount for tik tok shower head (https://smile.amazon.com/Shower-Handheld-Pressure-Filtration-Showerhead/dp/B0
Upgrade for your local public showerhead. The “Severe Service Showerhead” is a nice showerhead for maintenance purpose. Still, it is a hostile design in my opinion. Designed to fit with : Bradley S24-086WE20 (SX20) Severe Service…
A Showerhead holder for IKEA Brogund.
Printed PLA, 0,6mm Nozzle, no infill needed. Wall fixing with double-sided tape propper to wet areas.
Make bath time an adventure with this adorable starfish-shaped showerhead, designed specifically for little hands! Its lightweight and thin construction makes it comfortable for kids to hold, encouraging independence and fun. I engineered…
There are two models here. One with 4 screw holes, one with two. Depends on how you intend to mount it in between the seams of the tiles. The holder part is tapered and is in a 45 degree angle from the wall. The top openening is around 21…
Attaches to existing shower hose for bidet or high pressure cleaning. ISO threads, fusion 360.
shower head holder for 30mm diameter shower head Print Settings Printer Brand: Deltaprintr Printer: Deltaprintr Kit Rafts: No Supports: Yes Resolution: 0.4 Infill: 10 Filament: No brand. PLA Notes: Brim : yesrn10% infill : 20% may be…
Small clip to prevent the handheld showerhead from rotating while in its cradle. The clip-equipped showerhead slides as smoothly into the cradle as it does without the clip. This is modeled around a Moen Eos showerhead. Prints quickly and…
My showerhead was also broken so I had to design a “stake” that fits in this holder.
Purchased a cheap showerhead replacement online only to realize you're supposed to use a weird sticker to mount it to your shower wall - didn't like that. Trimmed off the thin excess sticker leaving a small sticky mounting plate. Our…
I didn't want to drill new holes in the wall, so I made a small and simple holder for my showerhead that fits the existing screw holes. The spacing for the screws is 35mm and the opening for the showerhead ist 23mm. Step-file is included…
Sometimes when bathing my little dog, its convenient to have the shower head held close by at a low level. I bought a nice shower stool but it has no place for accessories. I made this showerhead mount for the stool. I started by making…
My last shower head holder broke, so i re designed it. I ve increased the infill too, up to 30% Edit : V2 broke after 2 months (see photos)... i made a temporary V3 but far less sexy Here : https://www.thingiverse.com/thing:459736 If, by…
Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No. Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: purple Filament material: ABS+ Slicer: Ultimaker Cura 5.4.0 Printing temperature: 250 Celsium Build…
My Girlfriend is significantly smaller than me and can't reach the shower holder when it's at a height required for me to fit under it. In order for her to be able to place the head somewhere so that the bathtub is usable without 1.8m of…
This is a repair designed by me for a Roca showerhead. The support of the shower head interior broke, making it to fall with the water pressure. I believe it should not be a very common issue :) ! Made this part in ASA, but other…
This showerhead holder was made for my secondary shower that did not have a holder, and I didn't want to drill holes into the wall. This model fits most standard showers where the pipes run from the ceiling. The distance between the pipes…
Second time the ringnut breaks into pieces of the aliexpress showerhead So I decided to try to print a replacement part And here it is :D Hope I can help some other people with it. For those who are interested: It's an BSPP G2 1/2 - 14…
Replacement Parts for a Showerhead Holder i own. Category: Bathroom
This is a replacement part for detachable showerheads that hang on the wall with a hook. Layer height 0.2mm. Print with 100% infill and supports to build plate only. Print in PLA or PETG
I've designed the adapter with my 6yo daugher in mind - she wants to shower by herself, but the standard showerhead level is not comfortable for her (both hard to reach and set the angle of water stream). I did not want to drill holes in…
I needed some hooks to hang stuff and things. Might make it longer?
I didn't want to drill new holes in the wall, so I made a small and simple holder for my showerhead that fits the existing screw holes. The spacing for the screws is 35mm and the opening for the showerhead ist 23mm. Step-file is included…
Replacement Parts for a Showerhead Holder i own. Category: Bathroom
I've designed the adapter with my 6yo daugher in mind - she wants to shower by herself, but the standard showerhead level is not comfortable for her (both hard to reach and set the angle of water stream). I did not want to drill holes in…
