Wyniki wyszukiwania: sic

Malolo's Silica Gel / Desiccant Containers

I designed this silica gel container mostly for two reasons: I looked at several different silica gel containers and even printed a few but always found something I was not entirely happy with (I most likely didn't look at every single…

FAST Print In-Spool Desiccant (Silica Gel) Container with Hygrometer

FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…

Super fast silica gel desiccant spool container - vase mode

About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…

Filament Spool Desiccant Canister

A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…

GoPro Mount (Basic Flat)

GoPro Mount (Basic Flat) - Print your own GoPro mounts cheaper (10g = $0.50/0.50 EU/ 12 CZK)! - TESTED: very resistant

Music Box "He's a Pirate"

Video: (I was spinning a bit fast, at x0.75 speed it sounds better in my opinion :) ) Material and Settings: All parts were printed with a Prusa MK3S and printed from PLA . The layer height was 0.3mm (smaller is of course always possible…

Sichtlagerkästen / open-fronted storage bins Collection

Update 2025-03-04: Version 2 der Box S2 hinzugefügt mit Deckel und Trennwand. Außerdem Skadis- und Wandbefestigung für Größe S2 hinzugefügt. Text überarbeitet. Version 2 of the S2 box added with lid and divider. Also added Skadis and wall…

Functional Washers for PETG/ASA – Various Sizes – LR Basics

This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…

Snap-in Pipe Clamp – Zip Tie Lock – 20-120mm – 0.8-5.5in - LR Basics

There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…

TriStar Classic Modular Organizer - 200 × 150 × 75 mm

📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…

Samsung Galaxy Watch 6 Classic 47mm Stand

A remix of "Galaxy Watch 5 Active Charging Stand" to fit the 47mm model of the Galaxy Watch 6 Classic. I printed it with 100% infill to give it some proper weight :)

Utility for training basic sailing knots

According to the manual, kids will model simple mooring cleat, which will help them to learn how to tie cleat hitch. After printing, mooring cleat can be screwed to the wooden base with two screews.

Everyday Comb in a Classical Rounded Shape

I'm thrilled to share my latest creation: the Everyday Comb, designed with practicality and a touch of elegance in mind. This working comb combines ease of printing with the comfort of daily use, featuring a classic rounded shape…

Modular 19" Rack Case for Musical Gear

Modular 19" Rack Case This modular rack case is the perfect solution for storing and organizing your musical gear. It can hold up to four independent modules (4U), and multiple cases can be stacked together and reinforced with steel…

Geodesic Greenhouse - Articulating PVC Joints

Introduction This is a concept for greenhouse based upon a geodesic dome using 3D printed articulated joints, PVC pipes, and greenhouse plastic. Unfortunately I don't have the funds at the moment to realize the full concept but the 3D…

Small compact sliding desiccant box

A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)

Charging Stand for Samsung Galaxy Watch 6 Classic 47

A fancy charging stand for the Samsung Galaxy Watch 6 Classic 47mm! It might work for other versions or watches as well, but I didn't test that! The diameter of the charger-hole is 29.5mm I added a piece of 1mm thick sticky foam where the…

Classic Teenage Mutant Ninja Turtles Logo

Drew up and created a 3D, multi-color, version of the classic 90s cartoon Teenage Mutant Ninja Turtles logo. Printed with Hatchbox Red, White, and Green and Prusament Galaxy Black PLA filaments. Drawn in Affinity Designer, imported as a…

Which Ball Will Win? Gravity Physics Experiment

What the video below to see it in action! Use a pen to hold the 2 balls/marbles/bearings for a clean start and watch the bumpy road win! Ball size/weight/starting position/layer height all affect results. I used ball bearing and practived…

Child safety lock for seat belt (3 versions) // Kindersicherung für Sicherheitsgurt PKW (3 Versionen)

Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…

Samsung Galaxy Watch 4 Classic Charger Stand / dock

this model is created in Solidworks and i printed it on a MK3S MMU2s with a 0.6 mm nozzle. the mmu2s is not required 18/8/2023 Update i changed the tolerance on the slot for the cable so it fits a bit tighter

Valorant Basic Knife

Remix from the Valorant tactical knife from HEISENBURGERFR, i designed it to be printed in different part so you can paint the blade and the grip easier, also it looks a little bit more like the real one because of the bigger bolt hole .…

Classic Chess Set – Parametric Design (FreeCAD) - -ajedrez

Este es un juego de ajedrez completo para impresión 3D , diseñado desde cero en FreeCAD con un enfoque paramétrico , limpio y funcional. El proyecto incluye los archivos fuente originales de FreeCAD , lo que permite modificar fácilmente…

Basic Ninja Throwing Knife

A basic model for quick and repeated printing. Key attribute is the blade which has been blunted so kids can play safely. Printed on a MK3S+ at 0.2mm quality, PLA, no supports, and 15% infill.

Super Desiccant Jar (Vase Mode)

50mm diameter by 70mm tall desiccant jar (with screw on lid) that prints fast in vase mode and has TONS of air flow. There are even interior channels that allow for air from the perimeter to penetrate into the middle of the jar for…

Classic Lantern

Another lantern model. Illuminate with an electric candle. Enjoy! Supports are needed for the top piece. Windows are a two color print.

Classic Dr. Pepper Sign 2 Color

Color order: White then Red. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down.…

Classical Soap Dish

A strong and sturdy classical self-draining soap dish designed to be easily printed, without any support, on modern inexpensive 3D Printers. The object can be printed with a variety of material including PLA, PETG, ABS, ASA and other type…

iPod Classic Stand

This a Simple iPod Classic Display Stand. I wanted to use my iPod Classic as decorative element, instead of just laying around in my Drawer. Prints without Support laying on the Side.

Allit Basic 33 / Allit VarioPlus Hobby 33 drawer insert ( Aldi Workzone, Lidl Parkside) Kleinteilemagazin Schublade

The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. They come with a very…

Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses / Fuse puller

Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses Praktischer Helfer beim Sicherungsziehen bzw. setzen Konturen → 2 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Überall Infill →…

Classic Clamp Fully Printed !

I have designed and created a classic clamp specifically intended for hobbyists, particularly those involved in activities like modeling and crafting. What sets this clamp apart is its unique construction and functionality, catering to…

Classic Chess King

This is a beautiful classical style chess king designed with FreeCAD, with no compromise regarding supports. The original dimensions of the piece are 36 mm (≈ 1 27/64") diameter and 92 mm (≈3 5/8") height, but you can rescale it as…

Simple classic tent tensioner

Simple classic tent tensioner. Designed for a 4mm rope. Print instructions No supports needed. Tested with PETG Resolution 0.2 mm Infill 50%

Gaggia Classic - Steam handle

Steam knob for Gaggia Classic pre-2015 model with 6 mm hole with flat side. It is a very tight fit, just push on hard! The flat side is internally reinforced.

Vase Mode Desiccant Box

I'm finally moving away from gallon ziplock bags and storing my filament in 20qt Sterlite gasket boxes. I needed a bunch of (at least a dozen) desiccant boxes, and while there's tons of models out there, they're not exactly efficient to…

Filament spool desiccant cylinder

I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop for each one. I…

Musicman stingray bass thumb rest

30/12/2023 - Added new curved version. 07/06/2025 - Added Stl+Step files for left handed version.

Wooden Dowel Replacement - Various Metric Sizes (LR Basics)

Here is my design of straightforward replacements for wooden dowels. I created them for the FFF process to print them using PLA or PETG material. If these dowels are printed with the described settings and in the correct orientation, they…

Filament spool desiccant cylinder V3

I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop at for each one.…

60 Cookie cutters Basic Shapes 2.5cm (0.98 inches)

2.5cm (0.98 inches) The sizes are approximately! Do you need other sizes? Contact us! Please give us a ❤ if you liked the model, so we'll continue uploading interesting .STL! Ask us for custom designs! We are located in Buenos Aires,…

Classic curves in the sun.

027 Vorsicht: Spielende Zahlen! Pythagoras

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Partsdrawer Replacement for Allit Basic 33 (Aldi Workzone, Lidle Parkside) small parts drawer (Kleinteilemagazin)

If you already used my Label-Covers or Drawer Inserts for the Allit Basic 33 / Allit VarioPlus Hobby 33 drawer inserts (Also sold by Aldi Workzone “Kleinteilemagazin” or Lidl Parkside drawer), you may be interested in this one as well: I…

Basic C920 Shrould

As a new owner of a Prusa Mk3S+, I downloaded Fusion 360 and got to work on some basic geometry. My main purpose was to replace to the thin cardboard bent up cover for my C920 webcam. It's 2023, no matter how safe you are on the internet…

Dessicant container for Ikea drybox (Samla 22L)

Stable box for the desiccant which goes under the spoolholders of the ikea drybox (Samla, 22L). https://www.printables.com/de/model/98008-drybox-for-4-spools-ikea-samla-22l-based/files

IKEA 365+ 10.8l sliding desiccant container for Drybox

This desiccant box uses the lid of the IKEA 365+ 10.8l. I wanted to be able to remove the desiccant more easily than other solutions and came up with attaching the desiccant container to the lid. It is assembled with doulbe sided acyrlic…

053 Vorsicht: Spielende Zahlen! Winkelmesser 2

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Raspberry Pi4 enclosure in the classical Apple Macintosh SE style

This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…

Desiccant Dome

Deprecated as of 1/11/2024: I have no longer use or recommend this model. This is what I use now. This model was great when I lived in Colorado it was all I needed because it only got humid when it would rain. But after I moved I found I…

Teschio Messicano - Mexican Skull Silhouette

Silhouette Teschio messicano da incollare al muro. Misure: 16,3cm x 11,3cm sp.3mm Stampato in PLA

Castanet Toys - Nacchera Strumento musicale per bambini - Gioco musicale

Gioco Musicale per bambini. Stampare n° 1 manico e n° 2 parti laterali. Ci sono 2 versioni di manico, una per i bambini sotto i 3 anni e uno normale. La versione per bambini impedisce di spingere il manico in profondità in bocca e i fori…

Classic scratcher tip for Scratch Attach!

A simpler classic back-scratcher tip for Scratch Attach! made by @design8studio . Sand down/trim seams to taste.

Classic Curved Flower Pot in Various Sizes

This is my design of a classic curved flower pot, a timeless piece inspired by the wide, elegant shapes of Roman vases. This pot's design, devoid of handles, focuses on its gracefully curved profile, which widens towards the center before…

Dry Box Dessicant Shelf for Cereal Box

I love Prusament, but got tired of the dessicant balls getting stuck in the Prusa Hexes on the spools. I have regular kitchen cereal dry boxes and used to keep the bottom filled with dessicant. Now this shelf separates the spool from the…

Desiccant block for Rubbermaid drybox

This desiccant block fits the rubbermaid 21 cup containers. It has strong walls so it can support 1 Kg spools easily. Print Instructions: YOU MUST FOLLOW THE PRINT INSTRUCTIONS!!! Print using ZERO top and bottom layers (REQUIRED.) Use 45…

Basic screw cup

The most basic design you could imagine for a cup to contain screws. The 50mm by 50mm by 20mm in total volume which allows for a fair number of screws and enough wiggle room to find and extract the screw you want with bare hands. All the…

Recycled Overture Spool Screw-Top Container ▓ Desiccant Dryer

Take the sides off your used Overture spools and recycle!

Classic cruiser FJ45 Scx24 Deadbolt body shell.

Might have to fix some issues but easy and cheap to print.

Hot Wheels Basic Display (CUSTOMIZABLE NOW!) ('91 Mazda MX-5 Miata)

This was the car that initiated my hotwheels collection. I thought it deserved a basic display in order for it to stand out from the rest of my collection. I tried to keep it basic so it wouldn't take the focus off the car. ---UPDATE--- I…

"I love Music" Plant Climber

It is said that plants respond to music, they even grow faster when they hear music. We also love music, so why not show it and help this little plants grow. It can be printed without supports. If it is for the garden or for the flower…

Chobotnice z II. patra - CZ/SK Classic

I guess there is nothing to say but ENJOY :) GCodes are for MMU. Recommended Print Settings: Material: PLA Later Height: 0.15 detail Infill: Gyroid 10% Support: YES, organic on bottom tentacles and noses

010 Vorsicht: Spielende Zahlen! - Poly Snaps

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Basic Shapes Stencil

A very simple collection of common shapes made into a stencil with rounded corners. Made this by cobbling together shapes in PrusaSlicer and for use at my school for younger kids to enjoy ^-^ I'm still very much a novice to 3D design, so…

Musical Clef Symbol Coasters

Prints should start with black and change to white just above the 2mm layer, then back to black just above 3mm. Color changes are configured in the print and model files. On Prusa MK3S, I was able to print two coasters at a time.

Basic El. Circuit Stencil

Simple Electric Circuit/Diagram Stencil/Template It is really simple template to make electrical diagrams and circuits. It takes only 5 minutes to print. And it has less than 1 gram of weight. Look at my example of simple electric diagram…

Bottle Holder for Music Stand, Flaschenhalter + Handyhalter für Notenständer

Holds a beer-bottle 0,33 l + a pencil + a highliter + smartphone Just clicked on the pipe of the music stand with a diameter of 15 mm

Multicolor / Twotone Basic Board Cover - NO MMU! - Original Prusa Enclosure

I wanted the text and the buttons to be more visible, as I always had a hard time finding the buttons in the evening when there's just the enclosure light turned on. I wanted to do it with two different colors along with the black base…

HD Better Basic Board Cover With Symbols for Original Prusa Enclosure

Print Instructions: I used 20% infill, 3 perimeters, Prusament PETG jet black and prusa orange, 0.15 STRUCTURAL layer height (for better quality). Position it with the symbols facing UP in PrusaSlicer so that the top part is nice and…

elite inner classic pro

Este cover decorativo fue diseñado específicamente para ser compatible con la serie Cooler Master Elite Liquid Series, ofreciendo una forma simple y efectiva de renovar la estética del bloque sin modificar su funcionamiento original. Él…

Hand Spinner Classic

Ecrous bas HM 10 (pour clé plate de 17) Roulement type RC d5xd11 ép.4

Basic Board Cover for Original Prusa Enclosure (OPE) - No MMU

The single color version of the basic board cover is great except for one thing; you can't see where to poke it to turn on the fan and light when the room isn't super well lit. So, I decided to make a non-mmu multi-color version. And,…

"Leaded Glass" for Classic Lantern

A different “glass” insert for my Classic Lantern. Made in a leaded glass style.

securing buckle / Sicherungs Schnalle

This buckle is for elastics. It is used to tigthen a cpap hose to a elastic For universial use I included severel versions. The example is the 12mm version. The naming is according to the width of the used strap. The printing settings are…

Eibos Cyclopes Desiccant Holder and Plug

I was struggling to keep filament stored in the Eibos Cyclopes dry. The other filament holders did not get enough humidity out. I designed this desiccant holder to mount to the top of the cyclopes and still allow the vents to be opened…

Tripodium for classical guitar

UPDATE (February 2025): Step and Fusion files added to allow adaptation to other guitars and tripods. Play classical guitar with extra projection. Alternate between a sitting and standing position when playing for an extended period of…

Jurasic park-Game Park sign

Un remaster de jurasic park para donde quieras.

Classic Christmas Cracker: Gcodes and Extra Versions

Hello,,, Here we have more versions of our Festive reusable Christmas Cracker

Magnet-Schulungsmaterial Verkehrsabsicherung Feuerwehr

Für Rundmagnete 8 mm x 3 mm

Eibos Cyclopes Lid for Dessicant Basket

This lid is a tight fit by design. You have to slide into the space under the handle and the plastic will flex a little bit. Once it has snapped into place you can bend a corner back to pour dessicant pellets in or out. If you drop the…

Hub for Popsicle Stick Cuboctahedron

You will need 12 hubs and 24 popsicle sticks to assemble the cuboctahedron. the fit should be tight and the sticks won't slip out. There is also center facing slot for optional radial sticks. The large flat face points towards the center…

Kenwood Classic bowl support spare

Spare part for the bowl bottom support for standard Kenwood classic type. Easy to print - slots to avoid warping from the print bed. fits many different Kenwood kitchen machines Print instructions go for 0,2mm layer height. I use PETG so…

Popsicle stick (construction unit)

This model is done in Fusion360. Its a Popsicle construction unit toy to build what you can imagine. The print is pretty simple. I printed it on Prusa Mini+ with 0,6mm nozzle and 0,2mm layer height. I used Prusament PLA Green and Vanilla…

Capsicum Vegetable Marker

If you're like me you plant a lot of seeds in your vegetable garden and forget what you planted where. I made these to help me remember. Included is a gcode for a Elegoo Neptune 4 using PETG. In order to get the correct colours you have…

Classic Royal Clock

Reloj diseñado e impreso 100% por mi! Es un reloj estilo clásico, minimalista, pero con detalles de categoría. Un mix de estilos y texturas. Para la impresión del mismo se utilizaron los siguientes materiales: La estructura principal se…

019 Vorsicht: Spielende Zahlen! Tantrix Puzzle

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.

Laerdal CPR Doll Mask Coupling (Gesichtskupplung für Lunge)

A friend of mine needed new Face Mask Couplings for his Laerdal CPR Doll. So i re-create this piece for Home printing.

music notes

Great for learning.

musical note garland / festoon for decoration

garland / festoon with holes of varying heights for threading, so that it looks like a melody. Happy Printing

Bosch Fuse holder / Torpedo-Sicherungshalter

Two part model with integrated flex part. The flex inlay has to be printed first and be installed into the second part (pause in gcode). The holder holds the fuses so they can't fall out (Ideal for storage in the car or similar). The…

popsicle stick (smile)

perfect to dip into small yoghurts and let it freeze :) Print instructions As Material please use PETG, as it is the best one for food. The thickness of the layers should be 0,15mm, as otherwise the small reliefs can not be printed.

Physical Virtual Business Card

This OpenSCAD script generates a credit card sized card that holds a QR code that contains a business card, using the V-Card standard. Yes, that means you can give people your v-card. To generate your own, open the script in OpenSCAD and…

Tassen mit Gesicht

PLA Füllung 20% Schichthöhe 0,3mm ohne Stützen, ohne Rand Herz kann bei Tasse 2 normal, oder auf dem Kopf gedruckt werden.

Holder for the Potensic Battery Charger

This is a holder for the Potensic Atom Batteriecharger. You can hang it on the Wall or Where ever you want: [When it don't fit] Introduction: 1. Print it 2. Take a Hairdryer and heat the front of the Model 3. Take the Charger and press it…

Prusa XL 5H Drybox Spool Holder - Orthex SmartStore Classic 45L

I needed a drybox for my XL 5H, that I can directly print out of. I found the “SmartStore Classic 45L” container from Orthex in my local hardware store (Bauhaus) and it matched the dimensions to hold 5 spools side by side. I designed this…

HSW STAEDTLER Textsurfer Classic Highlighter holder

Honeycomb storage wall holder for STAEDTLER Textsurfer Classic Highlighter. Holds 8 items. You can customize holder with Fusion 360, see file markers_holder.f3d. Держатель текстовыделителей STAEDTLER Textsurfer Classic для Honeycomb…

Recorder (Flute) holder for a music stand

Can hold Alto and Soprano recorders or any similar instruments on a generic portable music stand with around 1mm thick sheet metal base. Added a little notch to hold securely on the stand. You can glue a piece of felt or rubber to protect…

Box Italian Playing Cards - Siciliane

I made this box to keep my playing cards organized. Box Measure 88x57.5x21.5 mm Napoletane cards pack measure 83x52x15 mm -- feel free to ask me for a modified box of different size -- [08.08.2023 Update] Uploaded a Double Deck customized…

Replacement handle for Gardena Classic wall-mounted hose reel 60

The original handle of our Gardena Classic Wall Hose Reel 60 broke after years of use. To keep the reel functional, I designed and printed a replacement handle in PETG. Like the original, the new handle is simply press-fitted into the…

011 Vorsicht: Spielende Zahlen: Quersumme - Ziffernsumme

Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.