P
PrintablesAndor @fullydefined
The Simplest Instax Polaroid stand
Print upright (like the .STL) Add a brim! Enjoy printing :)
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
- Pobrania
- 5504
- Polubienia
- 2073
- Ocena
- 5
Wyniki wyszukiwania: simplest
87 modeli
P
PrintablesSica
Simplest re-spooler for filament winder
This is the simplest and easiest to print adapter for re-spooling filament on an empty spool. You will need: - 2 pcs of this print - 1 M6 x 80 or M6 x 100 mm screw (lenght is not crucial - it has to be around 20-30 mm longer than the…
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
- Pobrania
- 93
- Polubienia
- 8
- Ocena
- 0
P
PrintablesZdeněk
Simplest Learning Clock (školní hodiny)
Yet Another Clock? My daughter needed a simple practice clock for school on a short notice. I did not like any of the models I could find on Printables, so I created my own. Better than going to the shops! Advantages: Quite thin plate =>…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
- Pobrania
- 74
- Polubienia
- 8
- Ocena
- 5
P
Printablesi6o6
Simplest cable organizer
Lot's of nice, clever, ingenious, good looking cable organizers out there - this is not one of those. This one is simple, effective and practical. Wind the cable on your fingers (3 of 4, depending on the size of your hand) and tuck it…
- Pobrania
- 8591
- Polubienia
- 3684
- Ocena
- 4,92
P
PrintablesNils
simplest AAA Battery Holder for your Caliper
Your cheap calipers drain batteries? I know, I know, I know! There are already almost thousands of solutions for your cheap calipers. There are plenty of battery covers (people tend to lose them when they try to preserve the battery from…
- Pobrania
- 2591
- Polubienia
- 1284
- Ocena
- 4,93
P
PrintablesTigFur
Simplest radiator hook / hanger
This little hook is designed to be simple to print and lightweight yet still very useful. If your radiator looks at least similar to mine, it will likely fit. Second model also has an extra round hole of 22mm diameter modeled to it, which…
- Pobrania
- 2306
- Polubienia
- 637
- Ocena
- 5
P
PrintablesJwillew
Ultimate Retraction Calibration! Simplest way to calibrate Retraction! Smart Retraction Calibration
You find english below! Deutsch: Als erstes ist es wichitg zu sagen, dass ich weder das Modell, noch die Methode entwickelt habe. Bei einigen Projekten habe ich gemerkt wie umständlich das Einstellen des Retracts ist. Ich habe mir ehrlich…
- Pobrania
- 1071
- Polubienia
- 56
- Ocena
- 4,17
P
PrintablesPhilippe Lacoude
Simplest MMU Print Test
This model is the blandest design on Printables. However, it is useful to do a rapid test of the MMU2S multi-material unit. The model has 6 layers. 5 cylinders and the letter P. The first cylinder is 0.4 mm tall while the others and the…
- Pobrania
- 453
- Polubienia
- 23
- Ocena
- 4,88
P
PrintablesSimenZhor
"Worlds Simplest" Neuralizer (Men in Black Memory Eraser)
Simplified, "working", neuralizer from Men in Black. The idea is that you could replicate this project using anything from 1 hour (+ printing time of around 6 hours for a 2mm layer 0.4mm nozzle print) to a couple of days, depending on how…
- Pobrania
- 448
- Polubienia
- 68
- Ocena
- 5
P
Printablespaul020559
Simplest Ever Filament Joiner Ever (Ever)
Simplest Ever Filament Joiner Ever (Ever) NEW AND IMPROVED Update 04-11-2022: No screws and now no cable-ties required. Many thanks to jcjames_13009 for suggesting his ‘hollow squares’. These are now part of the print with grips on the…
- Pobrania
- 430
- Polubienia
- 59
- Ocena
- 4,78
P
PrintablesNovator
IoT ESP8266 MAX7219 DISPLAY clock and informer BEST and simplest case ever
This is simple and easy to assembly case for MAX7912 and ESP8266 informer. It looks minimalistic and nice. V2 update (26.02.2021): Added version with display grid. It looks much better. Front part of the case is universal for both…
- Pobrania
- 319
- Polubienia
- 35
- Ocena
- 5
P
PrintablesManzhou
simplest mini4wd double wishbone suspension
So I can't help noticing someone hasn't already made a 3D printed version of DHS suspension for MS chassis….I mean people been doing these mods for over 20 years, but mostly Tamiya spec mods that are both time and money consuming to make.…
- Pobrania
- 192
- Polubienia
- 26
- Ocena
- 0
P
Printables3_Dave
The Simplest Modular Model — Support-Free, Quick Print: Armored Squirrel
he simplest modular model, support-free and quick to print — Armored Squirrel is a fun articulated creature designed for easy 3D printing and playful assembly. This little armored squirrel combines a cute animal silhouette with a…
- Pobrania
- 175
- Polubienia
- 30
- Ocena
- 5
P
PrintablesKk 310
The Simplest Filament Clip
My quest for the simplest and fastest printing filament clip has borne fruit! This filament clip will fit a wide range of spool sizes and not kink your filament For the fastest print, use vase mode and set your extrusion width to 0.89mm.…
- Pobrania
- 168
- Polubienia
- 18
- Ocena
- 2
P
PrintablesROK
Sibeera - the simplest beer rack EVER!
Meet Sibeera - the simplest beer rack EVER! Put it in your fridge, so bottles stop rolling around. Fits 3 standard (longneck) 0.33l beer bottles or 3 0.5l bottles depending on the version printed. I really love what you can do with spiral…
- Pobrania
- 167
- Polubienia
- 34
- Ocena
- 5
P
Printablestheincluder
Simplest money clip card
The most simple money clip with size of a credit card. Fits perfectly well in your 3d-printed card wallet
- Pobrania
- 161
- Polubienia
- 8
- Ocena
- 5
P
PrintablesGet It Print3d
The simplest bread clip of all time
I looked for other simple clips for closing bread bags but none are as simple as the one the bag comes with at some bakkeries. So I designed it in Tinkercad to be able to print more. You can scale it up to 200% (or more) to have it fit…
- Pobrania
- 160
- Polubienia
- 15
- Ocena
- 5
P
PrintablesRuFi
Simplest PCB spacer/standoff
This model is meant to be as simple as possible to print and use and it's especially suited for using leftovers of your almost empty spools. every spacer comes with a 5mm and a 10mm version. There are spacers for M2, M2,5 and M3 screws.
- Pobrania
- 156
- Polubienia
- 12
- Ocena
- 0
P
PrintablesJakub Semrád
The simplest PRUSAMENT drawer tower
I wanted to somehow use the used PRUSAMENT spool. I found a lot of storage boxes, but they were all complicated. That's why I decided to create the simplest one for PRUSAMENT spools. Detailed assembly instructions are included in the…
- Pobrania
- 139
- Polubienia
- 48
- Ocena
- 5
P
PrintablesMan(n)yIdeas
BBL Simplest Poop Chute
A 3D printed poop chute that doesn't require extra hardware or magnets. The BBL Simplest Poop Chute utilizes ONE secret screw that is longer than the others that is already on the back of the unit. This allows the poop chute to just hang…
- Pobrania
- 122
- Polubienia
- 18
- Ocena
- 0
P
PrintablesAntoine B
Simplest firework rocket launcher holder - Lanzadera cohetes
The simplest fireworks rocket holder, you will be able to launch your small fireworks during Christmas, to celebrate the new year and have a fun time with the children of the house with more safety and comfort. It is a very simple but…
- Pobrania
- 105
- Polubienia
- 5
- Ocena
- 5
P
Printablesm_IDEX
Magnetic IDEX Belt Coupling for World's simplest IDEX 3D Printer
In my videos I frequently call this coupling “The White Rabbit” 🐇. This coupling is designed for a disc Neodymium Magnet Grade N42SH (1/4" dia. x 1/8" thick) Max Operating Temp: 302F (150°C) For more information: Google Sheets BOM Print…
- Pobrania
- 97
- Polubienia
- 30
- Ocena
- 0
P
Printableskorqie
The Simplest Polaroid Picture Stand
Print upright with brim.
- Pobrania
- 97
- Polubienia
- 11
- Ocena
- 0
P
PrintablesSica
Simplest 2 DOF Servo arm with claw
This is the simplest Robot arm with 2 DOF's I've seen. I took inspiration from: https://www.printables.com/model/449747-brazo-robotico-robotic-arm and https://www.printables.com/model/217054-rc-servo-robot-arm I combined this and deleted…
- Pobrania
- 95
- Polubienia
- 9
- Ocena
- 0
P
PrintablesLink.2011
Simplest Raspberry Pi 1B Case
I recently got my hands on the original Raspberry Pi 1 Model B, but couldn’t find a case design that I really liked, so I decided to make my own. This case is designed to be compatible with most heatsinks, and ensures that the connectors…
- Pobrania
- 94
- Polubienia
- 10
- Ocena
- 5
P
PrintablesPrint-in-Place_Fun
Gearbox. Simplest ever. Fidget
I designed a very simple gearbox. These are 4 quick-print parts to rotate the gearbox by hand (fidget). I tested it on a radio-controlled car, and it works great. Here are the files for a universal gearbox designed for the two most common…
- Pobrania
- 87
- Polubienia
- 28
- Ocena
- 0
P
PrintablesJerbs
Ultimate Simplest Bambulab A1 Light Bar
Just got the Bambulab A1, and bought this LED strip from Amazon: https://www.amazon.com/dp/B0DBQ6NC 360 mm (14") long It is suggested to be stuck to the bottom of the X rail and it creates a horrible light quality. The light is milimeters…
- Pobrania
- 84
- Polubienia
- 13
- Ocena
- 0
P
PrintablesRob the 3D Printing Dad
Simplest Ender 3 S1 display stand
An easy print to have your display loose from the printer. I printed the stand with 3 perimeters and 10% cubic infill in PETg.
- Pobrania
- 79
- Polubienia
- 16
- Ocena
- 5
P
Printableswc23
Simplest Extruder Visualizer
Print in any color or plastic you choose, it's simple after-all. Use one of the spare magnets included with your Prusa printer. Two heights are provided to match the spare magnets, 10mm and 20mm. In the photo, the 10mm is shown. To…
- Pobrania
- 77
- Polubienia
- 28
- Ocena
- 5
P
Printablesenekomontero
The simplest but most awesome customizable name stand/phone stand
This model is an easy customizable name stand that serves as phone stand. It is a very original present. I printed almost 150 different customized models some months ago for a wedding. It was very easy to print and the guests appreciated…
- Pobrania
- 74
- Polubienia
- 10
- Ocena
- 0
P
PrintablesBooks
Simplest Bicycle Tube Ukulele Capo
A simple ukulele capo designed to snugly fit inside a section of used bicycle tube, held in place by a rubber band. I've recycled a short section of the rubber inner tube from a road bike tire to use with this capo. It has two grooves to…
- Pobrania
- 70
- Polubienia
- 8
- Ocena
- 4
P
PrintablesCrumbelino
End/Cover Plates for Simplest Cable Organizer
Simple End/Cover Plates for @ i6o6 's awesome “ Simplest Cable Organizer ”. These Plates fit for the 13 and 20mm versions but they can be easily adjusted in height to fit the 29mm version too.
- Pobrania
- 68
- Polubienia
- 18
- Ocena
- 0
P
PrintablesJailenmo
World's Simplest Marble Run
the simplest return-to-form for the Marble Run genre. this toy strips all the unnecessary spirals, turns, gimmicks and complications from a Marble Run to give you just the barest fundamentals. It starts, and then it stops. Just what a…
- Pobrania
- 66
- Polubienia
- 113
- Ocena
- 5
P
Printableskrisztian96
Simplest European Style Tissue Holder Floralys LIDL
I have a similar style tissue holder crafted from wood by my grandfather. I wanted something like that, i sketched up something quick. It would look better with hexagons, but did not really know how to do that. Hopefully someone will…
- Pobrania
- 66
- Polubienia
- 9
- Ocena
- 5
P
PrintablesCharliePapa
Connector for Simplest Cable Organizer
Connector for the “ Simplest Cable Organizer ” by i6o6. Plate connects two rows of the medium sized containers into two rows. Can be placed on both ends of the containers. In theory it can be extended to infinity…
- Pobrania
- 57
- Polubienia
- 16
- Ocena
- 0
P
PrintablesNerrian
The simplest hook
The print orientation gives high elasticity and good resilience. It will also work great as cable holder. The model is quite thin, so I suggest to use either glue or easy removable adhesive tape to attach the hook. I was testing hooks…
- Pobrania
- 56
- Polubienia
- 14
- Ocena
- 5
P
PrintablesLukynovoCZ
Simplest working base for Gloomhaven paper figure
Simple stand for Gloomhaven paper miniature 25mm diameter 2mm high works standalone or fits into Numbered Miniature Base Markers from Robagon https://www.thingiverse.com/thing:2872339
- Pobrania
- 53
- Polubienia
- 10
- Ocena
- 5
P
PrintablesSica
Simplest re-spooler for filament
Simply print 2 pieces of the same part. In one insert a M6x60mm screw and in the other a M6 nut. The 2 large holes are there to help your fingers to tighten or loosen the spool. Happy printing!
- Pobrania
- 51
- Polubienia
- 7
- Ocena
- 0
P
Printables3DStyle
Simplest LED Bar Mount for Prusa MK3/MK4
I couldn't find a simple and "minimalist" LED bar for my Prusa MK3S+, so I decided to make one of my own. It will give you enough light to see what your printer is doing without taking too much space. It's detachable so if for some reason…
- Pobrania
- 48
- Polubienia
- 7
- Ocena
- 0
P
PrintablesErnesi
Simplest Instax Polaroid Stand with Text
Remix of “The Simplest Instax Polaroid Stand” for a souvenir give away at an upcoming party. Took the idea of Andor Yoko and reworked the stand almost from scratch. Wanted an easy print without any supports and therefore designed a insert…
- Pobrania
- 45
- Polubienia
- 6
- Ocena
- 0
P
PrintablesCelvin
Simplest Instax Stand - Long Version
This is just a simple remix edit of Andor Yoko's “ The Simplest Instax Polaroid stand ”. Thanks for the simple design! I liked the simple design, but wanted a longer version, for horizontal photos. I don't have a Instax camera, but use it…
- Pobrania
- 44
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAmbrosia
The simplest possible STL
There is an ASCII text format of STL, and you can write an STL by hand in notepad. I learned how to write STL file format here. I think this is the simplest possible STL. It's a tetrahedron. It is written like this: solid m facet normal 0…
- Pobrania
- 35
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJohny.Whooof
The simplest Valve Index Controllers holder
I wanted a simple wall-mounted holder for my Index Controllers. This is as simple as it gets, the two arms are slightly curved so the controller doesn't slide off. I've printed it out using a 0.2 layer height, maybe it'd be worth trying…
- Pobrania
- 34
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNerrian
The simplest hook (with hole)
The print orientation gives high elasticity and good resilience. It will also work great as cable holder. The hole in hook is 3 mm. I was testing hooks made of PLA. Such hook can hold ~1kg load easily. It is only 0.46m or 1.41 gr of PLA.
- Pobrania
- 32
- Polubienia
- 7
- Ocena
- 0
P
Printableshausenfefr
Simplest cr2450 LED Light
LED fits snugly in recessed collar. Inner channels for LED contacts. Prints in as little as 11 minutes on the Gmax. Battery lasts about a month
- Pobrania
- 31
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNerrian
The simplest hook (with lock&hole)
The print orientation gives high elasticity and good resilience. It will also work great as cable holder. The model has a 3mm hole to screw it in place. I was testing hooks made of PLA. Such hook can hold ~1kg load easily. It is only…
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 0
P
Printablesolgapavlova
Simplest USB Holder
USB holder for vertical storage for one USB drive. Double side type is requred. Print Settings Printer: FlyingBear Ghost 5 Rafts: No Supports: No Resolution: 0.2 Infill: 13% Filament: SolidFilament PLA+ Yellow Category: Tool Holders & Boxes
- Pobrania
- 25
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSCREW
The simplest SCREW’s Russian Hand Protector against Coronavirus
As you know, one of the two most significant channels for the distribution of coronavirus (except for airborne droplets) is infection when you touch infected surfaces (door handles, handrails in vehicles, etc.) with your hands, and then…
- Pobrania
- 25
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSozic
- Pobrania
- 23
- Polubienia
- 2
- Ocena
- 5
P
PrintablesNerrian
The simplest hook (with lock)
The print orientation gives high elasticity and good resilience. It will also work great as cable holder. The model is quite thin, so I suggest to use either glue or easy removable adhesive tape to attach the hook. I was testing hooks…
- Pobrania
- 22
- Polubienia
- 5
- Ocena
- 0
P
PrintablesNautilus Forge
Simplest phone holder
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
- Pobrania
- 22
- Polubienia
- 5
- Ocena
- 0
P
Printablessifi
The Simplest Honeycomb Coaster
What is it? This is a coaster, simple as that. I'm a big fan of things that are simple, functional, and look good too. I designed this coaster to be all those things, and all the while being pretty quick and easy to print as well. How it…
- Pobrania
- 20
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJCosta
The Simplest HSW Spool Holder you can find
THIS IS INTENDED AS SOMETHING TO STORE YOUR FILAMENT, NOT TO USE IT TO FEED YOUR 3D PRINTER There wasn't too many options to use the original spool holder of my K1C in combination with the HSW. Got the easiest spool holder to print I had…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
Printablessifi
The Simplest Coaster
What is it? This is a coaster, simple as that. I'm a big fan of things that are simple, functional, and look good too. I designed this coaster to be all those things, and all the while being quick and easy to print as well. How is works…
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 5
P
PrintablesDalibor Hegli
The simplest reusable filament spool
The simplest reusable filament spool
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 5
P
PrintablesRoket
Simplest TPU Cable Holder
I was used to use a plastic square to carry around my phone cable or other cables, as you can see in the pic. Having some TPU i designed one with same dimensions, it holds perfectly my cables in my bag and it's more robust too! So I'm…
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
PrintablesThe Free Heathen Workshop
FHW: World's simplest cell phone stand
Hello Tribe, We have also had an interest in cell phone stands, so we tried to make the simplest stand we hope you enjoy. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on…
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesA-Mek
Simplest Core One MMU3 Cable Sagging Fix
The PTFE tube on the Core One is serving double duty, feeding the filament to the extruder and supporting the maincable. However, when the MMU3 upgrade is installed, the PTFE tube no longer supports the maincable, because the bend at the…
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 5
P
Printables@TimPostma
Simplest form Toy Boat
It’s a Canadian designed simple toy boat for As a Toy or decoration for pools or closed bodies of water Now released , originally 3d printed in pla , though I suggest printing it ASA or PETG for more longer term use ( under the public…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKotlin
Possibly the simplest Dual Z Axis for ender 5 (NO MORE LOOSE BED)
YOU NEED A BOARD THAT SUPPORTS 2 STEPPER MOTTORS ON ONE DRIVER (LIKE BTT SKR MINI E3 V3) What you can expect after the upgrade: The structure supports the bed on the other end, so it cant flex up and down freely like it does in the…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPavel Gavryushkin
Graphite the simplest
This is the layer of graphite, printed with PLA-filament. Atoms were colored with silver acrylic paint to make model more attractive. Auto-generated supports.
- Pobrania
- 15
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGalvani Filho
BOXY: Rook MK1's simplest toolhead with CPAP
Meet B.O.X.Y. short for B arely O verdesigned X -axis Y ielder. I love my Rook MK1 so much, but Rookery (albeit beautiful) won't hold an ABL probe and Sentinel is way too large. So I designed this toolhead from scratch. It's easy too…
- Pobrania
- 14
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTony Lehnert
Simplest Raspberry Pi 1B Case v2 w/ 1602 LCD and mechanical keyboard switches
The bottom part can be printed as is. Print the top part with the display side facing down, without supports.
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFejszi
The simplest fume extrachtor (120mm Version)
!!PLEASE READ BEFORE PRINTING!! Key features: No fasteners needed * .step files are provided: easy to modify and remix Durable: you can drop it and the fan will have more damage than the printed part ;) Doesn't tip over : when filled with…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
Printableszzzy
simplest TUSH baseplate: EZ
Simple, no-frills, fixed dimension, and fast printing, your EZ TUSH baseplate. Works with the wonderful TUSH: The Ultimate Spool Holder by u:filamentry . Source design for FreeCAD included. (fully parametric) Category: 3D Printer…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNeko3D
the simplest scratcher you can find
this is (I think) the simplest scratcher you can find on printables ! (I will print it at 20 likes) there are no instructions for the print: you just can't mess it you don't need a lot of filament to print it so I think it's the best…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAntKlesk
World's Simplest Draught Excluder for Door Corner
A very simple draught excluder, affix to door corner. It's not perfect, but it will reduce a breeze a little. Print with Transparent PLA/PETG, or match door colour.
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJudaLaub
The simplest organic support display ever
A really simple way to show the coolness that is organic supports, I made it to show my parents but then was like “might as well put this on printables”
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSerdar Guryuva
Simplest Cable Holder
Even though there were a lot of cable holder designs, almost all were unnecessarily complex. This is the simplest.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBobojeff7
Simplest, one-piece, and compact DJ stand
This is a very simple stand that is very compact for the HERCULES : DJCONTROL MIX or any other DJ controls.
- Pobrania
- 8
- Polubienia
- 6
- Ocena
- 0
P
Printablesamd
Simplest Steam Deck Stand
There are already oodles of Steam Deck stands, but many (or all?) of them have unneeded, complicated features or unsupported overhangs or not ideal print orientations. Load up that last little bit of material on a spool somewhere and…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesChesterfield mc muffin face
The Real World's Simplest Marble Run
it only took 2 shapes and it took me about 5 seconds to make proving that it is very simple. plus, not only does it not catch your marbles, it doesn't even give a proper starting place for your marbles. Help me beat the "Worlds Simplest"…
- Pobrania
- 7
- Polubienia
- 4
- Ocena
- 0
P
PrintablesN-Mi
Simplest, cheapest, lightest filament cleaner !
What you need : a zip tie an approximatively 25x25x25mm "magic sponge" (white melamine) cube. Can be bought on many online shops, often for around 1€/1$ for 10 pieces. Just put the zip tie around the sponge cube, then push the filament…
- Pobrania
- 7
- Polubienia
- 10
- Ocena
- 0
P
PrintablesVreter
Simplest Card Holder (CMF Phone 2 Pro)
A simple card holder attachment for the CMF Phone 2 pro by Nothing. The corner at the top left of the phone attachment holds the cards in one position, while the cloth band acts as a locking mechanism. The geometry at the end of the band…
- Pobrania
- 6
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFheder
Simplest DIY desktop fan
I had the idea to create the simplest easy to print, open-source project to make a desktop fan A battery box is included in the same body, the rest of the components are easy to buy It's a work in progress; I'm adding the Fusion360 and…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPavel Gavryushkin
The simplest furniture leg
Printed in PLA with 20% filament to make the model more strong
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesOmatron Engineering
Child Chest Belt Clip (Simplest)
Best with supports, can be printed in PETG or TPU. 0.4mm, 3 walls, 3 top, 3 bottom, layer 0.2mm 25% infill Uploaded a new version, reinforced.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJoel
The Actual Real World's Simplest Marble Run
This is the simplest marble run you can get.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesD M
Simplest Aerogarden cover
This is about as simple as you can get with an Aerogarden pod cover. This one was measured to fit Rainpoint and Ahopegarden models as well. This is less than 3 grams of filament, prints in about 6 minutes.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesglgr
Simplest Adjustable Phone Stand (Print In Place)
Simple quick to print phone stand. If you already have the other model you can just print the remixed part and add it to the socket.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEvanRLD
The simplest TPU Cable Clip for 1/4-20 Threaded Mounts
A small TPU clip that screws directly into any standard 1/4-20 threaded mount — the same thread found on camera cages, video rigs, tripods, and cold shoe adapters. It keeps cables organized. The slotted ring design lets you slide cables…
- Pobrania
- 4
- Polubienia
- 3
- Ocena
- 0
P
Printables
Possibly the simplest Dual Z Axis for ender 5 (NO MORE LOOSE BED)
YOU NEED A BOARD THAT SUPPORTS 2 STEPPER MOTTORS ON ONE DRIVER (LIKE BTT SKR MINI E3 V3) What you can expect after the upgrade: The structure supports the bed on the other end, so it cant flex up and down freely like it does in the…
P
Printables
The Simplest Honeycomb Coaster
What is it? This is a coaster, simple as that. I'm a big fan of things that are simple, functional, and look good too. I designed this coaster to be all those things, and all the while being pretty quick and easy to print as well. How it…
P
Printables
plaster nest (simplest one)
u only need plaster, m3 bolts and acrylic also u can use 10mm tubing (10 and 15 mm tubing with better tubing nest) mix and pour plaster into formicarium till the thingy between 2 chambers (u can add layer of sand as a decoration) put…
P
Printables
plaster nest (simplest one)
u only need plaster, m3 bolts and acrylic also u can use 10mm tubing (10 and 15 mm tubing with better tubing nest) mix and pour plaster into formicarium till the thingy between 2 chambers (u can add layer of sand as a decoration) put…