Wyniki wyszukiwania: sip

Kermit Sipping Tea

Kermit Sipping Tea The cup is empty so you could turn it into a Kermit Sipping Tea Key Holder.

Python siphon shrimp guard

I have several Shrimp tanks and it's always difficult to gravel vac with them around as they just have to look at and check out EVERYTHING. So, I designed this to fit over my Python gravel vac. Once printed, just drill some 1/16th holes…

Munchkin Miracle 360 Sippy Cup Holder

I wanted the ability to organize my child's bottles so they were not rolling around in bags spilling everywhere. This design holds three bottles inside of a soft cooler, keeping them upright, and allows storage space for snacks and other…

Shaker siphon for garden hose

If you want to empty a barrel etc using a siphon but find it uneasy to start the siphon - this is an easy way to do so. This shaker siphon is a actually just a valve. By shaking it down into the water (or other liquid), that water can…

Shaker siphon for garden hose

I've added one version with a inbuilt nut and another with knurling. The internal valve should be printed with 100% infill. The included .gcode files are configured to print the valve at 100% infill, while the outer body is set to 4 walls…

owala FreeSip 32 oz Cup holder Adapter

This is a cupholder adapter for the owala FreeSip water bottle. I tested it in an 06 Accord, and 2012 Mustang. Fit it somewhat loose, to avoid scraping off the branding during insertion/removal.

Jiggle siphon - use gravity to pump fuel and liquids (+ video)

This is a 3D printed version of the jiggle siphon - an easy way to siphon fluids without the need to first prime the tube. Simply shake the submerged jiggle siphon and fluid will start flowing through the tube. It works as long as the…

Nalgene Sipper

I designed this sipper after a downloaded model resulted in an in proper seal. Also it was printed with overhang which required support and was less hygienic due to the imperfections on the supported surface. So I designed this model with…

Sipeed NanoKVM Lite Case

The housing consists of two parts. The cap is snap-in. The HDMI and USB-C ports are easily accessible and not recessed into the housing. The housing has a cutout that allows access to the microSD card without disassembly and holes for…

Open Button for Owala FreeSip Water Bottle

WHY Well, last weekend, I was just sittin' at my desk, writin' some code, when… **BLAM**!! Shot in the arm by my Owala water bottle button. Now it's frustrating enough that the button just shot off the water bottle, but it took me like 20…

Garden Hose Siphon Filter Basket

Designed this to attach to a common garden hose so it could be used to siphon large amounts of water while preventing leaves or other debris creating a blockage in the small hose opening. In hindsight, I should have printed this in orange…

Darwer with Magnet for Stealth Press (HSIP)

Big thanks for IconicFAB for this design i like it a lot but i'am little bit lazy so i made this drawer ;;

Shaker Siphon for Garden Hose V2

Garden Hose Shaker Siphon with Quick Release version 2 This practical Shaker siphon has an integrated valve that allows you to empty any container containing liquids. It is designed to be compatible with garden hoses of different sizes…

Blow-to-start siphon (venturi effect)

A simple tool to create a siphon using two tubes. It uses venturi effect to create a vacuum. Useful when you want to transfer liquids and you don't want / can't inhale (ex: aquarium water, fuel...). You just need to blow into the tube to…

Garden Hose Easy Siphon

A simple non return valve that lets you easily start a siphon with a garden hose. Male garden hose thread for easy attachment. Good for draining hot tubs, pools etc. To use, attach to the end of the hose then rapidly move the hose up and…

Sipeed NanoKVM Lite enclosure

2parts, held together by four M3 10mm screws and nuts. no supports needed. OpenSCAD source available. New : Optional top that houses 4x4x4mm NdFeB magnets. Even half-populated it will stick to any metal case (just be aware of magnetic…

Siple Phone Holder with cable pass-through

Just a simple phone holder with a little hole to pass a charging cable through. Print Settings Rafts: Doesn't Matter Supports: No Category: Mobile Phone

Desk-Stand Upright Pole Mount For "Airbrush Holder for Paasche Siphon Feed Airbrush"

This is a quick and dirty stand for people who don't have the 1" shelf upright to attach the claws of the "Airbrush Holder for Paasche Siphon Feed Airbrush". This stand can sit on the table beside you and have the claws attached without…

Anti-Siphon Adapter

Anti-Siphon Adapter for Freeze Dryer I use this on my Harvest Right Freeze Dryer Installation Install the adapter on the drain hose to allow defrost water to flow in one direction. When you open the valve on your drain line, air will be…

Cirkul SipVault Flavor Holder

An alternative to Cirkul's $20 piece of plastic, this print allows you to store, protect, and dry the flavor cartridges for your favorite water bottle, without sealing all the moisture along with it. Designed with special draining…

Sipeed NanoKVM lite Case

This is a custom-designed protective case for the Sipeed NanoKVM Lite, an open-source KVM switch that allows you to control multiple computers with a single keyboard and mouse. The case is designed to provide both protection and…

NALGENE - Sipper - Trinkaufsatz

Ensures that no more liquid than necessary comes out of the conveniently fillable wide-neck bottles.

Sippy dick

Cirkul Sip Holder w/ Drip Tray

It's a holder for Cirkul Sips. I also made a drip tray that the bags can slot into so you can keep track of which sip is which flavor. The sip holder just sits inside the drip tray. I would recommend printing with PETG, or sealing the…

Josip Broz Tito bust

We reccomend print at .16 layerheight, 3 perimeters, 3 top/bottom layers, with infill set around 10% (adaptive cubic-faster print).

Ford Anti Siphon Fuel Funnel

This is a funnel for fueling a ford vehicle. Designed from the actual funnel supplied with the car. Best printed with a resin machine, as the FDM printed model leaks. EDIT: V2 - Corrected size.

Original Shaker Siphon Pump (Drop in glass marble while printing)

I wanted a siphon pump whilst out adventure riding, i made this one that works with a glass marble dropped in whilst printing. Get some vinyl tubing put it on and it should work for you! Can take a second to get the technique. Made from…

Mississippi, USA (MS) Topographic Map with Rivers

Mississippi, USA (MS) Topographic Relief Map with Rivers and Coastal Waters Mississippi, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…

Kermit Sipping Tea -remixed without the hand

Kermit Sipping Tea -remixed without the hand and some small retouche :D STL version

Siphon liquid detergent tray for washer (v2)

Siphon liquid detergent tray for washer Two tray dimensions Normal Short/wide See Narrow tray for Blender file for easy modification to fit your washing machine. Printing No supports needed. Print backside down as shown below Example…

Self starting siphon

A remix of self starting siphon by dougfeig. This version is smaller and easier to print: 60° overhangs don't need support Triangular section assures a better adhesion on printer's bed Wall size optimized for 0.4 nozzle Have fun!

Siphon / Syphon adapter - 1 1/2 inch to 1 1/4 inch

Expands a 1 1/4 inch syphon fitting to an 1 1/2 inch syphon. Used to connect a 50mm siphon to a sink with a smaller thread.

Sipeed NanoKVM Lite case - no supports

There are other NanoKVM cases but I wanted one that would print without supports for an easy and good looking case. This model was designed with the heat sink in mind, but it is optional. To install it is very simple: place the NanoKVM…

Button for Owala FreeSip Sway Water Bottle

This is a replacement water bottle button for the Owala FreeSip Sway. The button uses a different mechanism to stay in place than the original FreeSip. Compatible with the lock feature of the bottle lid. For strength, I recommend printing…

Sipikes Collar with Interchangeable Spikes

Do you want a unique and stylish collar that reflects your personality? Sipikes is the perfect solution. With its interchangeable spikes, you can create your own custom design and change in whenever you want. Sipikes is made of…

Cup Holder Adapter for 40oz Owala FreeSip

Here's my take on a water bottle cup holder adapter, mainly for my 40oz Owala FreeSip. My 2014 Toyota Corolla's cup holders are really only designed for cans an cups with a tapered bottoms. Anything with a thick bottom won't fit, so here…

Mississippi towboat

To print at 150-200%, full size is 140mm long. Cabin roof to print separately and glue on the boat.

ShakerSiphonMoto

This is for carrying on a motorcycle. It's flow rate is rather low of course, but when one needs to transfer a bit of fuel to a friend, then it's going to be invaluable. It takes way less space than a spare fuel container. I drilled and…

Glowing Earrings: insipred by "My Girl with a Pearl"

My friend Julian from Instagram created a nominated and winning ai-generated image for the contest "My Girl with a Pearl" from the Mauritshuis Museum in The Hague/Netherlands. You should definitely check out his Instagram:…

Dreame Abflussschlauch an Siphon Geräteanschluss

Dieser Aufsatz passt auf den Geräteabfluss/Anschluss an einem Handelsüblichen Siphon. Der Abflussschlauch vom Dreame, für den Festwasseranschluss, passt exakt in die Öffnung. Mit etwas kraft reindrücken, aber aufpassen das man den…

Mississippi State Keychain

Simple keychain for those Mississippi State fans :-) Start with gray, white, then maroon. Visually similar works exist; however, this design is wholly new.

Blow siphon remix for airline hose

Plug an aquarium airline hose in the marked holes. (inner: 4~5mm, outer: 6mm) Put a hose marked as 💧 in the tank, and blow a hose marked as ≈. (You might need to blow it really hard) Lower the siphon's drain hole from the tank's water…

Water bottle lid handle for Owala FreeSip

Recommend printing with 4 perimeters. Examples were printed in PETG (matte black) and Pro PCTG (purple) with 0.20 mm layer height. Snug supports work well. Suggest orienting the part right-side up (opposite from model file orientation).

TK Cirkul Sip Holders with Drip tray

Simple remix of the original version. I separated all parts so there are not supports needed to print this. Everything locks in pretty well, I would recommend using some super glue to lock it in place! I removed some un-need material as…

PC CAJA ITX CON VENTANA LATERAL DISIPADOR AMD WRITH PRISM MINI TORRE LOGO RYZEN COMPUTER CASE

Quería montar un Equipo Informático de Productividad en mi zona de estudio ( para ofimática y navegación Web) que a la vez que fuera eficiente energéticamente tuviera suficiente potencia y no se quede corto a medio plazo, además debía…

Heat dissipating LED shade for ENDER 3 S1 PRO

Place the side with rounded edges at the end and there is no need for any supports. The model requires 15% infill. REDIT: I have tested it for a week and even after hours of keeping the LED light on, it remains relatively cool.

Drain small swimming pool siphon attachment

I designed this model to drain my pool by gravity. My pool has a size of 300 cm * 200 cm * 75 cm. It will take some time, but just leave it be. You need a garden hose where the end of the hose will be lower than the bottom of the pool,…

Lathe Tailstock Handwheel (fits SIP Lathe 01360 & ?Draper WTL1100, ?Scheppach DMS1100, DMS900)

My friend broke the original handwheel for his SIP wood lathe and was distressed to discover from SIP that the part was unavailable. 3d printer to the rescue... I took measurements from the original wheel and made modifications to the…

Aquarium Siphon Adapter 1in PVC

I needed a very long siphon vacuum to reach the bottom of my very tall fish tanks. I had some 1 inch clear pvc and a length of siphon hose. It has a slight taper fit similar to normal PVC fittings. You may need to scale it up or down a…

Yealink SIP-T33G spare desktop stand

PETG 0.2 mm layer height 15% infill 3 wall loops Manual tree support for clips

Nalgene Sipper for Wide-mouth Water Bottle

Print in colorFabb_XT Clear , which is FDA food contact compliant. Avoid using other liquids than water, this is to reduce exposure to bacteria.

SiSi - strainer-Siphon combination for floor level shower drains (TECE Drainline)

My second approach for an easy to use and rarely to clean strainer for floor level shower drains. This time I replaced the original tube ("TECE Tauchrohr" see pictures) by an own designed one.The new tube is for the siphon-function in…

Junior/Toddler Sippy Cup with Straw

Designed this replace a couple of cups of a similar design that were just too flimsy. Instant hit with our kids and really easy to make. Print details 100% infill No supports or rafts Used PLA but probably works with other materials My…

Winemaking siphon parts

These parts can be used to make a siphon (AKA racking cane) for winemaking. A clip holds the siphon to the top of your brewing flagon, and a cap for the bottom of the siphon prevents sucking up lees that have settled to the bottom.…

Deckel 1" Abwasserrohr Siphon

There are 2 versions included. “Fitter” is slightly tighter, depending on the tolerance of the printer. If you need a really tight seal, you can also print the TPU seal. Es sind 2 Versionen enthalten. “Fitter” ist etwas enger, je nach…

Auto Siphon Racking Cane Holder

This Racking Cane Holder clips right to the side of your bucket or to a carboy! Allows you to adjust height of siphon. Will hold standard sized auto racking canes (22mm diameter). Easy to print with no supports. Designed with Fusion 360…

Airsoft mock supressor insipred by antreg vlc micro supressor 556

Airsoft mock supressor insipred by DTK 9mm. 15mm length 14mm cw thread. Printed with 0.1 height, worked well.

Aquarium Siphon Cage

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker End cage for an aquarium siphon to avoid accidentally…

Nalgene Sipper 500ml

Insert for 500ml Nalgene bottles to assist with ideal drink flow

Stand for Autobot Matrix of Leadersip

This is a stand for the Transformers G1 Autobot Matrix of Leadership as seen in the 1984 Transformers The Movie as well as the cartoons and comic books. The Matrix model this stand was designed for is the one by Parke Bowman which can be…

KERDI/Dallmer Odour trap für Shower Drain/Geruchsstop für Duschrinnen Siphon

Spare part: Odour trap for KERDI and Dallmer shower drains Siphon insert with removal function Ersatzteil: Geruchsverschluss für KERDI und Dallmer Duschrinnen Siphoneinsatz mit Entnahme-Funktion

Owala Freesip Handle Grip (24 oz)

Get a grip. On your favorite water bottle that is! I designed this easily printable handle to attach to your 16 oz Owala. Simply print it in your favorite durable filament, and snap to fit the pieces. Category: Kitchen & Dining

Siphon Fed Airbrush Cup (Badger, Paasche, Binks, ect.)

This is a replacement cup for siphon fed airbrushing. I wanted a few extra cups without spending a ton of money and I also just wanted to see if I could. There are two sizes, one standard and one large capacity. These were printed in…

ISI Cream Siphon / Whipper Case

A case to hold an ISI Cream Siphon / Whipper Print instructions Just barely fits on a bed of a mk3. Included 3mf with some custom infill modifications to use less filament if desired.

Siphon pump

Simple little siphon pump. Uses a short length of ~10mm tube. Just put the end of the tube in the water. Place the pump lower than the tube and pull the plunger out quickly. You can print the bottom couple of mm of the plunger in TPU for…

High airflow heat dissipator M5c

reupload of the print head cover that helps with heat creep on the M5C

Airbrush siphon (1ml disposable)

Airbrush siphon cup 1ml (4.7 mm pipe). 2nd item with 4.6mm pipe Print multiple siphons for the each color needed. Tip: Printing with a brim or raft allow cups stand more stable on the table Category: Art Tools

Serviceable Extra Flat Floor Drain Siphon

Has anyone been annoyed with a non working siphon in a shower? Especially when the shower has an extra flat floor drain. This original design is sealing itself by compression inside the floor drain's circular edge. It is design as a two…

Supermarket refrigerated fruit vegetable open display cooler siphon drain !!!

Sifon Cooler 40mm for a Supermarket-refrigerated-fruit-vegetable-open-display-cooler. Woow something for scrabble... Vegetable coolers tend to condense, i designed a 3 part sifon that would fit the existing 2 wholes on each side which fit…

Fish Tank Siphon Hose Clamp 10mm version

Remix, needed a clamp for a bucket to hold the Kobalt power washer feed tube to a 5 gal. bucket. Category: Outdoor & Garden

Owala FreeSip 24oz adapter for 5th gen Honda Odyssey (2018)

The 24oz Owala FreeSip claims compatibility with “most” cupholders; my van apparently doesn't fit the definition of “most”. If you also have a 2018 (or possibly any 5th gen) Honda Odyssey and don't want to just put your FreeSip in…

K1 Extruder Filament Runout Sensor - Improved Heat Disipation and Weight Reduction

This is a simple remix of Henlor's extruder cover, optimized for SLS and SLM printing.

Sipeed NanoCluster Case - Noctua Edition

This case is a refined version of the original Sipeed NanoCluster Case, redesigned to support the Noctua NF-A6x25 (5V PWM) fan and to provide a more convenient opening/closing mechanism. I’ve also added a bottom access hole so you can…

Heat Dissipating Mug (or cool Plantpot)

This mug was originally designed to quickly cool down Tea. Designed for SLM Metal 3D Printing Technology, or lost wax casting. Can be printed in pretty much any health safe metal. Thermal dissipation analisys have been conducted both for…

Pet Sipper - No spill water bowl

I find that it seals up pretty good if you screw the bottle in and out about 10 times. An o-ring can also be used to make a 100% water-tight seal.

BIG J.O. Mississippi towboat

Mississippi towboat inspired by pictures and dimensions of the. oat named BIG J.O. Scale 1/100, model is 384 mm long Deck0 (water level) is divided in 3 parts to be printed on a 220x220 printer. Print deck0_front and deck0_rear in standup…

Replacement Phone Stand for Yealink SIP-T33G Phone

File this under “kids do the darnedest things…”. We had some of the kick stands/mounts on the back of our school district IP phones go missing or get broken. There was no way to purchase replacement parts, only to replace the entire…

Siphon Gasket 40mm

Siphon Gasket 40mm / Klemmdichtung

Hexagonal self propelled Siphon

The origianl one is awesome, but i wanted a smaller one for "not so high" glasses. when i made it smalled i'd give me problems in the walls... so i decided to make this one which is easier to print due to the flat walls. it's a nice print…

Siphon Anschluss Rohr Abfluß Waschbecken Waschtisch

Da unser Metallteil durchgerostet ist und es am Sonntag keinen Ersatz gab habe ich dieses hier konstruiert. Es passt besser als das original.

Siphondeckel

Ich habe einen alten Waschbeckensiphon für die Waschmaschine verwendet. Der seitliche Zugang war schon geöffnet und einer der beiden Öffnungen musste verschlossen werden. Da der Schlauch der Waschmaschine nicht lang genug war, habe ich…

Siphon pipe replacement washbasin / Siphonrohr Ersatz Waschtisch

Wie schon so oft, ist der Siphon undicht und natürlich passiert es am späten Abend. Bei der Demontage fällt schließlich auf das sich das Anschlussrohr bzw. der obere Kragen aufgelöst hat und einmal demontiert kriegt man es nicht mehr…

Siphon Racking Cane Holder

This is an auto-siphon racking cane holder for attaching to a bucket. Fits 22mm diameter. I printed mine 100% infill, but play around with whatever works best for you.

Wide Mouth Easy Sipper

PETG 0.20mm, 100% infill, ironing top surfaces only used arcwelder - printables does not allow g-code upload with g2/g3

48oz Nalgene Easy Sipper Lid REMIX

These are like bicycle training wheels First learn how to drink with the easy sipper lid and slowly you will build the confidence to try your first sip without the lid Happy drinking

b.box sippy cup replacement sliding cover

I have very young kids and my partner purchased these b.box sippy cups. The problem with my kids (which I'm sure other parents experience this too) is that they keep either loosing or breaking the sliding caps. So after the last one…

Case for SiPEED Tang nano 9k

Case for SiPEED Tang nano 9k board. Print: 0.4 nozzle, 0.2 layer, 15%infill, 3 wall, 4 top, 4 bottom, no support needed (if no problems with bridges). Assembly: add a piece of foam rubber under the screen 4pcs self tapping screws m2.3x8,…

Shampoo Rinse Bucket with Siphon Learning Activity

This is a multi-purpose bath bucket. It has 4 different curved edges to match different sizes of infants' heads (R50, R60, R70, R80) which helps rinse shampoo from their hair without getting water in their eyes. For older children, it has…

SHAKER SIPHON pour tuyau arrosage filetage 20-27

REMIX pour adaptateur filetage 20-27 fonctionne parfaitement imprimé en PETG

1L Nalgene Sipper Easy Drinking Insert

Insert for 1L wide-mouth Nalgene bottles to make it easier to drink. Includes a lip along the non-drinking edge of the insert to help with removal. Print from a food-safe filament. Print with default settings without supports. Version for…

MississippiBenchy

Change the Benchy to a Mississippi ship

Racking Siphon Tube Holder

Holder for a 3/8" hose holder with an oversized clip for odd shaped carboys. Easy to print with no supports. Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: No Resolution: 0.1 Infill: 100 Filament: Inland…

Owala Freesip water bottle handle

I really like my 24oz Owala Freesip water bottle, but there's one thing that's dumb: the locking mechanism that doubles as a carry loop. I want to carry my bottle by the handle while also ensuring it's locked. My models are inspired by…

Drawer Base with Symetrical Layout (for HSIP)

Small change of the layout in the drawer base part. It is now symmetrical and there is no divider under the hole of the plate.

HairSnare: Der ultimative Haarfänger für deinen Siphon

Meet the HairSnare: The Ultimate Drain Dragon Slayer! Tired of standing in ankle-deep water while your bath turns into an unintended spa? Enter the HairSnare —your new best friend in the battle against clogged drains and rogue hair…

Mittlere Dichtung für Siphon 32mm

Neulich musste ich am Wochenende einen Siphon reinigen. Dabei ging die Dichtung kaputt. Ich habe sie kurzerhand konstruiert und mit TPU gedruckt.

American alligator (Alligator mississippiensis)

A print of an American alligator (Alligator mississippiensis) skull. It takes a while to print but you should only need a few supports. I used bone white from inland to print it and it seems to work well. I have a few skulls around the…

Redneck Sippy Cup

My first contest entry. Should fit standard Mason jar. Enjoy some lightning or some iced tea without spills. Lol Lettering is offset height to allow simple layer filament stop to add color.

Anti-Siphen Shield

I develop a splash guard that will slip onto a standard Anti-Siphen valve that attaches to your garden hose valve. Certain states/areas require an Anti-Siphen valve to be locked on your hose valve to prevent containments going back into…

Sipik SK68 flashlight holder for NERF rail

Sipik SK68 flashlight holder for NERF rail. Use an M3 screw (~16mm) and nut if you need to tighten the mount around the rail. http://www.dx.com/p/sipik-sk68-cree-q3-wc-120-lumen-convex-lens-led-flashlight-black-1-aa-1-14500-39585 Print…