Wyniki wyszukiwania: squashball

Sortowanie

43 modeli

P
PrintablesJan Hubík

Hexagons with solid bottom/top for the Mini Base Squashball Legs

The Prusa Mini Base Squashball Legs version has the balls cutting through into the bottom hexagon on each leg. I did not like it, so I designed hexagons with solid top and an edge adjusted so it does not push on the ball. They can be used…

Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu

Pobrania
55
Polubienia
10
Ocena
5
P
PrintablesJohn Pomeroy

CoreOne L Squashball Feet for CoreVault

Printed with PETG, I think I used a gyroid interior. Modified the original feet to be solid thru and thru then added a 40 mm negative volume sphere 26 mm from the bottom. This holds the balls in. The original squashball feet came from…

Wydruk około 3,65 €–4,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
6
Polubienia
4
Ocena
0
P
PrintablesRui do Carmo

SquashBall MK3s/MK3s+/MK4 Vibration Damper V3.0

Update 2023: Check version 4.0 of this design here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Version 3 of my old Design:…

Pobrania
2260
Polubienia
585
Ocena
4,88
P
PrintablesVektor

Prusa mini squashball feet Low Profile noise reduction

I saw that nobody made any low profile squashball feet for prusa mini so i did. The design is inspired by some other creators, with my own spin. Legs are push to fit, so no screws or bolts needed. i recommend printing 4 feet total for…

Pobrania
1861
Polubienia
426
Ocena
4,92
P
PrintablesTPdesign

Prusa core One feet v2 - Squashball Version - Anti Vibration

Remix of the Prusa core One feet v2 to attach Squashballs for less vibration Printed it in PETG, more then 5 perimeters and gyroid 25% Thanks to PrusaGuy/David! Awesome design.

Pobrania
912
Polubienia
336
Ocena
4,83

Creality K1/K1 Max: Squashball Foot

Print cup side upwards to use minimal supports. I'd recommend 3 walls and at least 20% infill for strength. Get yourself 4x 2 yellow dot squashballs (these have the best damping properties) and simply jam them in to hugely reduce noise…

Pobrania
576
Polubienia
96
Ocena
4,86
P
PrintablesRui do Carmo

SquashBall MK3s/MK3s+ Vibration Damper

Check the latest version here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Yet another SquashBall MK3S/MK3s+ vibration Damper, I had 3 design objectives: Damp the nasty vibrations caused by the…

Pobrania
564
Polubienia
126
Ocena
4,71
P
PrintablesVektor

Prusa mini squashball feet z axis support

remix of a popular Z-Axis Support Brace to work with my feet design. print this if you have printed my squashball feet and want to have z support brace together with a foot right under it. 2 parts printed separatly to make it an easy…

Pobrania
422
Polubienia
72
Ocena
3,75
P
PrintablesPSPS

Prusa Mini Base Squashball Legs

Wanted to put my upgraded Mini on Squashballs for noise reduction. I didn't modify the inserts to continue working with the USB drives and USB port since i did not use those features and had some trouble with Fusion360, so i just made…

Pobrania
301
Polubienia
65
Ocena
4,92
P
PrintablesEvocato

Prusa Mini Squashball Feet

A feet designed for the Prusa Mini. The feet fits normal squashballs and can be simply clicked anywhere into the 30mm aluminium extrusion.

Pobrania
292
Polubienia
68
Ocena
3,67
P
PrintablesSwamp21

Prusa mini squashball back foot redo/fix

I'm a huge fan of this design. It really does quiet down the Mini, quite significantly. However, I was having issues with the back foot coming off every time the printer was moved. I.e. removing the print bed, inserting the memory stick,…

Pobrania
165
Polubienia
25
Ocena
5
P
PrintablesDiego F2M

(INSIDE FRONT FEETS)SquashBall MK3s/MK3s+ Vibration Damper V3.0 (for toolbox version)

if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 (…

Pobrania
129
Polubienia
27
Ocena
5
P
Printablesdatapagan

Prusa Core One - Squashball feet - Cleaned up version

Remade the design to get rid of artefacts in the faces, provided is the f3d and step (use the .step for printing)

Pobrania
121
Polubienia
19
Ocena
3
P
Printables3D-Fuchs

Higher squashball feet for Prusa i3 mk3

Support needed. This feet is suitable for LCD + Hyperpixel 4" touchscreen

Pobrania
119
Polubienia
26
Ocena
0
P
PrintablesNautilus Forge

MMU2S Buffer Bottom Mount compaptible with SquashBall Vibration Damper V3.0

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Pobrania
83
Polubienia
15
Ocena
5
P
PrintablesSchnipp

Squashball Silencer Feet for Concrete Paver

I wanted to silence my printer even more by putting four squash balls under my concrete paver. Therefore I took these ( https://www.prusaprinters.org/de/prints/17995 ) feet and cut the Pin off and added a Rectangle. Print instructions I…

Pobrania
73
Polubienia
6
Ocena
0
P
Printablespankleks

Ender 3 Squashball feet's (Low Profile)

Vibration dumping squash ball feet's for Ender 3/PRO/V2 printers. Depending on your printer you may wish to print 4 standard feet's or 2 standard and 2 PSU feet. PSU feet has additional recess for PSU cover (tested on Ender 3 V2) Possibly…

Pobrania
68
Polubienia
12
Ocena
5
P
PrintablesVoronwë

Back/Frontplate holder for SquashBall MK3s/MK3s+ Vibration Damper

I have a larger einsy case mounted to my mk3s and therefore the original profile holder did not fit my printer. I solved this by adapting the original profile holder to fit on the back (or front) plate of the printer instead of the alu…

Pobrania
61
Polubienia
9
Ocena
0
P
Printablesdym801

Remix Prusa MK4 bin with SquashBallFeet

Un remix de https://www.printables.com/fr/model/526044-prusa-mk4-bin moins long, plus haut pour passer entre les pieds en balles de squash de https://www.printables.com/fr/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40

Pobrania
54
Polubienia
7
Ocena
5
P
PrintablesDaHouzKat

Prusa mini squashball back foot redo/fix REMIX

This is a REMIX of the Prusa mini squashball back foot redo/fix Remixed it to use it with the Raspberry Pi Z-Box Integrated 4B Case for Prusa MINI (REMIX) Print instructions It is a tight fit, make sure your printer is well calibrated if…

Pobrania
51
Polubienia
13
Ocena
4,5
P
PrintablesFDEngineering

Ender 3 Squashball Feet

Summary: Facts: Dampening feet through the combination with squashballs Perfect fitting for Ender3 Printers, could also fit Ender3 like Printers Side mounted at the 4040 Aluminium Extrusions Low build height ensured through side mounting…

Pobrania
51
Polubienia
5
Ocena
0
P
Printablesscraps

Yet Another Squashball Foot

Lots of these out there, many were just not right for what I needed so I quickly designed a simple one to meet my needs. This was designed for my Two Trees SP-5 but should work for any printer that has room for the 25mm diameter base that…

Pobrania
48
Polubienia
11
Ocena
0
P
PrintablesMichael

Core One feet with switch and squashballs

Practical stands for the CoreOne. The stand without a switch can be mounted on any corner of the CoreOne. The stand with a switch is available in two versions: left/right. For feet with a switch, an additional M3x10-20 screw with nut is…

Pobrania
44
Polubienia
37
Ocena
5
P
Printablestom

Noch ein Squashball Vibrationsdämpfer für MK3S - Another squashball vibration damper for MK3S

Ich habe einige Dämpfer für meinen MK3S ausprobiert und auch neue entworfen, die Schaumgummi genutzt haben. Eigentlich haben alle ihren Zweck erfüllt den Drucker leiser zu machen. Wenn allerdings über längere Zeit Filamentspulen auf dem…

Pobrania
42
Polubienia
4
Ocena
0
P
PrintablesPippo pewte.ch

Halved SquashBall Decoupler (Perfect for Bambulab X1C & P1P)

( Full video ) I added tons of weight to my printer rack, but the X1C still shook everything when fully going at it. Printing on the prusa mini standing one shelf above was not possible while the X1C was running. Decided to give the good…

Pobrania
41
Polubienia
17
Ocena
5
P
PrintablesMaxter3D

Shock Absorber Squashball feet

Please leave a Like :-) Just my Design for a Shock Absorber Feet with 2 yellow Dot Squash Ball. 1.2 Wallthickness and 30 % Infill is stiff enough for my Printers. On FLSun I had to free some Space because of a Screw - Sapphire and JG…

Pobrania
37
Polubienia
5
Ocena
0
P
Printables3D-Academy
Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesJnd

Thin walls for Squashball's profile holder

This is a remix (same license as the original ). Thin walls are added to the holder's base triangle so that it does not fall off when printing in PETG. The profile needs to be filed for assembly anyway, this consumes less plastic than a…

Pobrania
31
Polubienia
5
Ocena
0
P
Printableskami

SquashBall_Foot_usb-extender

support squash Ball avec extension USB Print instructions avec support 0.2 mm

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesPhilip

Cable cover for Prusa MK4 Squashballmod

A Remix for the original cable cover if you have installed the squashballmod.

Pobrania
30
Polubienia
6
Ocena
0
P
Printablesmcboeck

YASF (yet another squashball foot)

I found a lot of different squashballfeet, but I wanted one to match the design of the printer, so I designed one on my own. No tools for mounting needed. I printed it in PETG and starting from 25,2mm I switched to FLEX to make the…

Pobrania
23
Polubienia
5
Ocena
0
P

Shock Absorber Squashball feet

Shock Absorber Feet with 2 yellow Dot Squash Ball. I have been using this design for years on the bottom of my Prusa/Pulse, but I needed them a little taller for room underneath the printer. These should fit just about any printer out…

Pobrania
18
Polubienia
7
Ocena
0
P
Printablesstonehome

CR-X Anti-vibration SquashBall foot/feet

This anti-vibration foot is based on a squash ball and can replace the original feet. Just replace it and use the original screw. Print Settings Printer Brand: Creality Printer: CR-X Rafts: No Supports: No Resolution: 0.2 Infill: 50%…

Pobrania
16
Polubienia
0
Ocena
0
P
Printablesjomivo

Magnetic Case for Squashballs

This is a magnetic box for three squash balls. The magnets are embedded in the print so you have to configure a pause at Z in your slicer. You'll need additionally: 8x3 mm Magnets (6 pieces) Make sure you've checked the polarity before…

Pobrania
15
Polubienia
3
Ocena
0
P
PrintablesLilZig

Snapmaker U1 Squashball feet mashup / remix

Due to the excessive vibrations from the U1's acceleration, dampening with squashballs has been a great addition (and also slowing the Z-hop to 200mm/sec from 500mm/sec+). All recalibrations performed for vibrations/alignment worked as…

Pobrania
14
Polubienia
2
Ocena
0
P
Printablesrs-kuuskyt

Adjustable squashball isolation feet

Designed these for a makeshift turntable isolation platform (using IKEA Lämplig cutting board). The feet house cut-in-half squashballs. There's .5mm clearance in the XY-direction, so dimensional accuracy of your printer shouldn't be of…

Pobrania
13
Polubienia
4
Ocena
0
P
PrintablesMacGyverCanada

Prusa Core One Feet v2.1 - Squashball Anti Vibration

Remix of TPdesign's squashball feet; I simply added a hole for a M3x10 (or larger) screw to hold the squash balls in place when lifting the unit. M3x10 seems to hold them well enough, but you can still remove the squash balls easily…

Pobrania
12
Polubienia
3
Ocena
0
P
PrintablesDakar

Squashball foot (bolt-on) with angled USB

This is a remix of a couple persons (Kami & Daniel) prints. I have several reasons that I'd like to share: I prefer the squashball feet on the Prusa Mini printer as they decouple the noise from the desk\table a great deal and make it much…

Pobrania
12
Polubienia
5
Ocena
0
P
PrintablesPSPS

RPi Cam 2 Arm support for Prusa Mini Squashball Base

I remixed the camera arm mount to fit the inserts from my squash ball base. Also manipulated the camera case to make my

Pobrania
10
Polubienia
0
Ocena
0
P
Printablesberthold

Low Profile squashball feet for t-slot

this is a remix of the original low profile feet for v-slot https://www.thingiverse.com/thing:3385254

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesXavierD

Prusa MINI+ Squashball Back Foot

It seems that the electronics box of the MINI+ is just a bit wider than the regular mini. As such, the original model doesn't fit anymore. I simply widened it a bit so it fits again, works great on my model.

Pobrania
7
Polubienia
0
Ocena
0
P
Printables

Core One feet with switch and squashballs

Practical stands for the CoreOne. The stand without a switch can be mounted on any corner of the CoreOne. The stand with a switch is available in two versions: left/right. For feet with a switch, an additional M3x10-20 screw with nut is…