Wyniki wyszukiwania: sra

Sortowanie

555 modeli

P
PrintablesAlCheMaker3D

Das Schicksalsrad - Box für Carcassonne

Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…

Pobrania
27
Polubienia
5
Ocena
0
P
Printablesdodasch

SRAM CHAIN GAP ADJUSTMENT TOOL 52 TEETH 12 SPEED

I printed the STL "original" with an Ultimaker 3 Extended in PETG/PLA. You can print the STL "optimized4print" easyer without PVA.

Pobrania
2087
Polubienia
105
Ocena
5
P
PrintablesEl Manu

SRAM 2 CHAIN GAP TOOL

The new model of SRAM chain gap tool provided with AXS derailleurs Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Prusament PLA Category: Tools

Pobrania
1972
Polubienia
93
Ocena
4,75
P
PrintablesEvilProphet

ESRack - Mounting Brackets

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
1798
Polubienia
151
Ocena
4,64
P
PrintablesGLeZz

5 Shekel coin with key-chain for supermarket trolley (Israel)

Five Shekel coin with two key-chains for supermarket trolley (Israel) Print instructions Category: Household Supplies Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.1 Infill: 20

Pobrania
1512
Polubienia
81
Ocena
4,78
P
Printablesantionion

SRAM eTap/AXS Cover for Battery Block

SRAM eTap/AXS Cover for Battery Block | Front/Rear Derailleur and Dropper Post Print in PLA 0.4 mm Nozzle 0.2mm Layerhight. Supports Yes

Pobrania
1213
Polubienia
56
Ocena
5
P
Printablesntressler7

SRAM Large Bleed Block - For SRAM Code Brakes

This is a replica of the large bleed block that comes in the SRAM bleed kits. It is intended to be used with SRAM Code RSC and SRAM Code R brakes. DB8 compatibility: As reported by @Radek, this bleed block can also be used with SRAM DB8…

Pobrania
1104
Polubienia
50
Ocena
5
P
PrintablesEl Manu

SRAM ADJUSTMENT TOOL

Provided with brand new EAGLE 12 speed system, this tool allows you to set the correct distance between the pulley and the cassette. Print instructions You are absolutely free ! I printed it in PLA, no need to set the infill as it's…

Pobrania
1081
Polubienia
112
Ocena
4,89
P
Printablesdaytrader

SRAM chain gap adjustment tool V2 - modified for easier print ;-)

The new model Version 2 of SRAM chain gap adjustment tool provided with AXS derailleurs. Works on all SRAM Eagle 12-fach-Cassettes with 50 or 52 teeth as the largest sprocket :-)

Pobrania
954
Polubienia
27
Ocena
5
P
Printablespinspanner

Sram Code piston tool set

A set of spacers designed to advance a single piston or two pistons on the same side of the caliper. There is a left and a right side spacer that advance a single piston in the case of a sticky piston or to clean each piston. There are 4…

Pobrania
936
Polubienia
71
Ocena
4,86
P
Printablescmh

Holder for bicycle cassettes - Shimano, SRAM, etc

Simple holder for Shimano cassettes with the lockring. Three versions are available: 11 speed version Fits road 11 and 12 speed cassettes Any cassette can fit on this version, but anything that's not 11 or 12 speed road will have a gap…

Pobrania
899
Polubienia
183
Ocena
4,94
P
Printablespinspanner

SRAM Universal Derailleur Hanger UDH

Printable UDH hanger. Not sure that I would trust a printed hanger long term but if you need it for a ride and can't get to a bike shop it could be the ticket. I should clarify that this is not a truly universal hanger. Universal…

Pobrania
766
Polubienia
57
Ocena
0
P
PrintablesTrimetric

SRAM AXS Charger Holder

If you own more than one bike with a SRAM AXS groupset, you may have accumulated a few of the single battery chargers (EP-EAC-BC-A1) like this one: The individual chargers are very light and the cables tend to cause them to slide around…

Pobrania
725
Polubienia
50
Ocena
5
P
PrintablesSphaeroX

SRAM Brake Disc

Just print with support Category: Tools

Pobrania
658
Polubienia
66
Ocena
5
P
PrintablesEvilProphet

ESRack - Module - Blank

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
646
Polubienia
66
Ocena
5
P
PrintablesEvilProphet

ESRack - Connecting Blocks

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
645
Polubienia
51
Ocena
5
P
PrintablesEvilProphet

ESRack - Module - Dell Wyse 5070

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
546
Polubienia
43
Ocena
4,33
P
PrintablesLuckyMenace

SRAM eTap / SRAM AXS Battery Blank with Keyring Hole

After a ride in which I lost power to both my seat dropper and derailleur as I hadn't charged them, I went looking for a solution - to both reminding me to charge, and also reminding me not to forget batteries on my next ride. I…

Pobrania
529
Polubienia
41
Ocena
5
P
PrintablesDaniel Sexton

AGM-69A Missile (SRAM)

This is a full size rendering of an AGM-69A Missile. Cura resizes it for me to 5% so keep that in mind when loading into your slicer. My wife and I worked on this Missile System during our 20 years in the Air Force. The 3D Model is based…

Pobrania
515
Polubienia
32
Ocena
4
P
Printablesvidision

SRAM AXS battery and charger organizer

Designed to hold the SRAM AXS charger and 3 batteries or battery covers

Pobrania
479
Polubienia
55
Ocena
4,75
P
PrintablesEvilProphet

ESRack - Module - Ubiquiti UniFi Cloud Gateway Ultra/Max

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
460
Polubienia
58
Ocena
5
P
PrintablesMLEOW

SRAM Umschlingungswinkel/ Chain Gap Tool SRAM

English below Du hast deine einstelllehre von deiner Schaltung verlegt, sie ist kaputt gegangen oder dein Nachbar hat sie sich ausgeliehen und nie wieder zurückgebracht? Kein Problem, Druck sie dir einfach selbst. Ich habe sie gedruckt…

Pobrania
428
Polubienia
21
Ocena
5
P
PrintablesAndreas Fink

SRAM AXS Road Brake Caliper Piston Cleaning and Bleeding Block

Sometimes caliper pistons get stuck due to dust and dirt. For cleaning you need to push them out. If you do it wrong they fall out and you loose your breaking fluid and need to bleed the whole system. With this design you can push out one…

Pobrania
408
Polubienia
40
Ocena
5

Firefly - Honkai Star Rail (by sraoill)

This is a free model, provided by sraoill on cults3d.com. He has allowed me to share my fdm print profile on makerworld, as he is fully focussed on resin printing ( https://cults3d.com/en/users/sraoill/comments#comment-answer-518825 ).…

Pobrania
404
Polubienia
42
Ocena
0
P
PrintablesLauer

SRAM X1 MOUNTAIN BIKE CRANK BOOT

This is a small plastic protector for the end of the SRAM X1 mountain bike crankset, to prevent rocks from scratching the bottom of the crank arms. It will probably fit other aluminum SRAM cranks (GX, etc) but I haven't tested that. To…

Pobrania
389
Polubienia
30
Ocena
5
P
PrintablesEvilProphet

ESRack - Module - Lenovo ThinkCentre M710q

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
384
Polubienia
35
Ocena
4,4
P
PrintablesDolev

Star of David 5 Shekel coin(ILS) for Shopping cart (Israel)

This is a simple design of the 5 Shekel Israeli coin with Star of David on it (or blank for your on design), The coin high is 2.4mm and it's take around 5 minutes to print (very easy print), There is 4 versions: Blank coin - to put your…

Pobrania
382
Polubienia
21
Ocena
5
P
PrintablesNightSky

ESRack - Module - 8 Keystone

I really liked the original ESRack system design created by @EvilProphet . I created a module for keystone connectors from the Blank Module The ESRack system includes the following components: Mounting Brackets - used to install the unit…

Pobrania
379
Polubienia
39
Ocena
4,75
P
PrintablesTiger3DPrinting

Sram AXS battery cover

I couldn't find a axs battery cover that worked for both road bikes, gravel bikes, and mountain bikes so I made my own. hopefully this helps someone. tolerances are tight.

Pobrania
377
Polubienia
31
Ocena
4,75

power rangers wild force crysral saber

there are a few details that are missing if you are gonna print it scale it to 10%

Pobrania
362
Polubienia
59
Ocena
0
P
Printablesob3calp

SRAM Maven Brake Caliper Piston Massage Block

3.8mm and 4.0mm thick SRAM Maven brake caliper block to aid in the piston massage process. Details of the piston massage process can be found on the SRAM Mineral Oil MTB Disc Brake Installation, Hose Shortening, and Bleed Manual ("Disc…

Pobrania
334
Polubienia
14
Ocena
5
P
PrintablesDaniele

Sram Bleed Block (tested on Guide and Level)

I've also uploaded a version with extra space to allow for releasing one piston at a time, making cleaning and maintenance easier. To extract all four pistons, you'll need to print two of these blocks, one should be mirrored.

Pobrania
330
Polubienia
25
Ocena
5
P
Printablesquinkq

SRAM DUB Bottom Bracket Preload Adjuster

SRAM Bottom Bracket Preload Adjuster - MPN: 11.6418.001.001 Modeled replacement for myself after breaking the original (ordering aluminium one from ali probably would have been more time efficient). Printed out of PETG 40% infill months…

Pobrania
327
Polubienia
30
Ocena
0
P
PrintablesKrystian

Tool for SRAM Rival/Apex/Force AXS Power Meter V2

A simple tool to help assembly and disassembly SRAM Rival/Apex/Force AXS Power Meter (QUARQ) from the crank. 2026-FEB-14 Update: V2 Release: The updated model features an improved fit and an additional lever function, allowing you to pry…

Pobrania
326
Polubienia
26
Ocena
5
P
PrintablesGajdy

Israel Relief map

Nozzle 0,4mm Material PLA Resolution 1,6mm Firs layer height 0,2mm Infill 20% Model dimensions 112.56x211.66x14.73mm

Pobrania
322
Polubienia
38
Ocena
4,5
P
PrintablesVasKeZ

Sram AXS Ultimate Pod Button Cap Replacement

I broke the bottom button off my Sram AXS Ultimate shifter pod right before I'm supposed to bring my bike on vcay to Whistler. I tried looking around the web, calling the LBS's and NOBODY has them! Lame. Apparently the part is too new and…

Pobrania
315
Polubienia
28
Ocena
5
P
Printablesse038

SRAM DUB Bottom Bracket Tool

Update: Added a part for T47. However, I have only tested it with T47x68 BB. It may not be strong enough for use with T47 internal BB. I printed with PETG and it worked fine. Designed to fit perfectly with TL-FC36. It might not fit in…

Pobrania
313
Polubienia
26
Ocena
5
P
PrintablesMLEOW

SRAM DUB SPACER

English below: Du hast Probleme mit der Kettenlinie oder der Montage deiner SRAM DUB Kurbelgarnitur? Mit diesen selbst konstruierten und 3D-gedruckten DUB-Spacern kannst du die Passung und Funktion deiner Kurbelgarnitur optimieren. 🔧…

Pobrania
305
Polubienia
25
Ocena
5
P
PrintablesEvilProphet

ESRack - Module - Vented Blank

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
296
Polubienia
30
Ocena
5
P
PrintablesRenārs Vilnis

SRAM Level TLM/Ultimate Bleed blocks /w different widths for better lever feel

Different width Sram Level TLM/Ultimate bleed blocks (part.no. 11.5015.014.090). The bleed block comes with multiple sizes: * 12mm (default) - Use when bleeding brakes which afterwards will use new pads * 11mm - Use when bleeding brakes…

Pobrania
278
Polubienia
19
Ocena
0
P
PrintablesPiketooth

SRAM Guide R brake pad spacer.

SRAM Guide R brake pad spacer for service or transport. It is a deep remix of " Sram 4 piston brake spacer " from 3Dimpulse on Thingiverse. I only kept the "snap" part, because it works well. I designed it in order to : -have a better…

Pobrania
272
Polubienia
22
Ocena
0
P
PrintablesEvilProphet

ESRack - Module - Dell OptiPlex 7060

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
264
Polubienia
27
Ocena
5
P
PrintablesGoren Sarid

Israel puzzle

This is a 40 piece puzzle of the topography of Israel and some of the surroundings, consider scaling height by at least 200% and sides by at least 140% to make it a reasonable size. I printed in 0.32 mm layer height and 16% infill. Make…

Pobrania
262
Polubienia
79
Ocena
5
P
PrintablesPhilip

Israel Border concrete wall Diorama 1/35

I build a Diorama with an IDF tank. And I needed the concrete wall pieces. So I decided to create some by myself. The scale is 1/35. But I found only measurements to the height… All other numbers are made to look “harmonic”.

Pobrania
256
Polubienia
40
Ocena
0
P
PrintablesRaphael

SRAM AXS Wallmount

Wallmount for 3 AXS Batteries and 1 AXS Charger

Pobrania
255
Polubienia
22
Ocena
5
P
Printablesontopathogenic

Box for sram axs battery

magnet (.2dim x .o65 thick) inches

Pobrania
253
Polubienia
30
Ocena
0
P
PrintablesEyalS

NIS (New Israeli Shekel) Coins Stand

NIS (New Israeli Shekel) coins stand. Can hold all the current coins... No support needed

Pobrania
241
Polubienia
44
Ocena
4,33
P
Printablesavanier

ESRack - Module - 3x power brick

Description I acquired a lot of Dell Wyse 5060 for my homelab and @EvilProphet 's excellent ESRack system fit the ticket for racking them. I whipped up this bracket to hold the power supplies for my 5060s / N07Ds. The intent was for this…

Pobrania
239
Polubienia
25
Ocena
0
P
PrintablesEvilProphet

ESRack - Front Plate

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
236
Polubienia
36
Ocena
0
P
PrintablesWilfred

SRAM SHIMANO Chaingap tool

I borrowed a chaingaptool and decided to design one for myself (and you) I made a photo, exported to stl, edited in 3d-builder and tinkercad. Its fits fine on my shimano xtr and 45 tooth rear chainwheel. Easy way to correctly adjust the…

Pobrania
233
Polubienia
36
Ocena
5
P
PrintablesNick Roosen

SRAM Eagle AXS Controller Discrete Clamp

Replacement clamp for SRAM Eagle AXS Controller. Out of stock EVERYWHERE when I needed one. Clamp bolt is replaced with an M4x10 into an M4 Heatset insert.

Pobrania
233
Polubienia
24
Ocena
5
P
PrintablesKyle Mason

SRAM Brake Caliper Pad Spacer

Per SRAM's Hydraulic Road Disc (HRD) Brake Hose Shortening and Bleed Manual this pad spacer should work with the following calipers: RED (2014-2019) Force (2015-2023) Rival (2015-2023) Apex (2017-2023) S-700 (2014-2021) I designed it with…

Pobrania
228
Polubienia
15
Ocena
0
P
PrintablesToma

Antriebsrad Gardena Sileno Mähroboter

Hallo, die Original-Räder haben mir zu wenig Grip gehabt und sie waren -gerade auf Stein bzw. Rasenkantensteinen- zu laut. Die neuen Räder haben ein besseres Profil und durch das TPU sind sie viel leiser. Das freut besonders meine…

Pobrania
228
Polubienia
26
Ocena
0
P
PrintablesTwo One

SRAM Battery Bike mount

This SRAM AXS backup battery mount allows you to carry a spare battery on your bike. The model features built-in supports that snap off easily. 🔹 Saddle Rail Mount – Attaches neatly under your saddle rails using zip ties 🔹 Bottle Cage…

Pobrania
226
Polubienia
22
Ocena
5
P
Printablesaqf23

SRAM DUB BB PF (bottom bracket pressfit) installation kit (NEW V2 handle!!)

This is an SRAM DUB bottom bracket installation kit. It's not necessary to buy a special and very expensive bearing installation tool to install the bottom bracket of your bike, I know that it looks better anodized in blue with a nice…

Pobrania
217
Polubienia
40
Ocena
5
P
PrintablesD.R MESIKA
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
212
Polubienia
38
Ocena
5
P
Printablesad hoc

SRAM cable spool replacement

People have mentioned problems with the cable spools on their SRAM drop bar shifters. Maybe they have also damaged them, I don't know, I've never seen pictures of them. This is a replacement cable spool for the late generation 10 speed…

Pobrania
209
Polubienia
7
Ocena
5
P
PrintablesEvilProphet

ESRack - Mounting Brackets Thick

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
199
Polubienia
15
Ocena
5

Shift Mixer - Shimano / SRAM

Hooray, I can finally mount my SRAM shifter on my Shimano brake! There are so many ways to fix problems by buying stuff. Here‘s my printed solution to a very common problem: the shifter won’t fit. I am quite sure, that any material other…

Pobrania
197
Polubienia
64
Ocena
5
P
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
191
Polubienia
90
Ocena
0
P
PrintablesSkondo

Magura Sram Shiftmix

Used to combine mounting points for magura brakes and sram shifters in one clamp. Printed in PETG with 4 perimeters and 30% infill. No supports needed.

Pobrania
190
Polubienia
20
Ocena
4
P
PrintablesSharkovich

Hallowtech II to SRAM DUB BB tool adapter

After buying new crankset with BB, I found out that my 4-in-1 BB wrench was not compatiblem with SRAM DUB BB (shocking, I know). Instead throwing away the same amount of money as I did for BB for special tool, I've decided to give a go…

Pobrania
187
Polubienia
15
Ocena
5
P
PrintablesSean Martin

ESRack (Remix) - Mounting Bracket (2mm thinner)

I took off 2mm from the original mounting bracket by EvilProphet. One of my racks was off by 4mm and wouldn't fit. With the bracket having 2mm less width it provided enough room for me to slide in my rack. Hopefully this helps someone else.

Pobrania
185
Polubienia
22
Ocena
5
P
PrintablesEvilProphet

ESRack - Module - HP EliteDesk 705

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
183
Polubienia
25
Ocena
0
P
PrintablesHaKashat
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
182
Polubienia
37
Ocena
5
P
PrintablesBaklin

Sram Level TLM/Ultimate bleed block

This is an old design that I imported from my prints on Thingiverse. I needed a bleed block after shortening the brake hoses on my new bike. This one works a bleed block and piston spreader. It works on the Sram Level TLM and Ultimate…

Pobrania
181
Polubienia
14
Ocena
0
P
PrintablesEvilProphet

ESRack - Module - Ubiquiti UniFi Switch Lite 8 PoE

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
179
Polubienia
21
Ocena
4,67
P
PrintablesKarakalKING UA

Israeli gangs. Help Ukraine soldier in war 2022

We organized the production of Israeli bandages: from design, plastic parts to sewing and packaging. Since the beginning of hostilities on the territory of Ukraine, we have re-equipped our production for the production of parts for the…

Pobrania
175
Polubienia
45
Ocena
5
P
PrintablesMape

SRAM eTap dummy battery

Just a plastic dummy battery for SRAM eTap shifters. These can act as dust covers while the real batteries are not in place (winter storage, charging).

Pobrania
174
Polubienia
11
Ocena
0
P
PrintablesKamil_INC

SRAM GXP and HOLLOWTECH 2 socket tool ROUND

This is a remix of existing model. Made this version smaller, round outside so that edges are not catching the frame.

Pobrania
174
Polubienia
22
Ocena
3,5
P
PrintablesDaniele

Compact Sram AXS Pod bar clamp

Compact Bar Clamp for the Sram AXS pod controller, it needs to be printed using carbon filament. This specific choice of material is crucial, as it imparts the bar clamp with the essential torsional stiffness required for optimal…

Pobrania
173
Polubienia
15
Ocena
0
P
PrintablesCamPaine

SRAM AXS Charger Wall Mount - 2 Chargers - Short

This is a wall mount for 2 SRAM AXS chargers. I have taken the original file and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and I can change the…

Pobrania
172
Polubienia
8
Ocena
5
P
PrintablesTimmaey

SRAM Battery Cover for Pod AXS Controller

I created this design after losing my battery cover on a rough trail and finding that a replacement was out of stock everywhere. Even SRAM couldn't point me to an online shop with one available! If you take a close look, you might notice…

Pobrania
171
Polubienia
13
Ocena
0
P
Printablesdawm

ESRack - Module - HP EliteDesk G3

I've printed a bunch of stuff part of the ESRack system for my home rack but I didn't like the HP Elitedesk module by @EvilProphet , so I resized and combined the one created by @Spekkie3D and added ESRack side brackets. This retains all…

Pobrania
171
Polubienia
14
Ocena
5
P
PrintablesMinitrowel

SRAM GXP / HOLLOWTECH 2 / BAFANG socket tool

SRAM GXP / HOLLOWTECH 2 / BAFANG BBS02 socked tool By: Michał “Stemic” (Stemic) License: Commercial use is allowed, you must attribute the creator, you may remix this work and the remixed work should be made available under this license.…

Pobrania
166
Polubienia
9
Ocena
0
P
PrintablesMarcoPi

SRAM Guide disk brake pad spacer

SRAM Guide disk brake pads spacer, meant to be used when transporting your MTB without the front wheel on. Remixed from a bleeder I found on https://www.myminifactory.com/object/3d-print-sram-guide-rs-piston-spacer-block-66782 . Print…

Pobrania
162
Polubienia
7
Ocena
0
P
Printableskjbturok

Tool for working with single piston brake calipers (Shimano, Sram and Magura).

I have more models available on my cult3d https://cults3d.com/es/modelo-3d/herramientas/3x-kit-for-working-with-brake-calipers-kit-3x-utiles-para-trabajo-con-pinzas-d page that increase the number of compatible brake models. Tool to…

Pobrania
159
Polubienia
10
Ocena
0
P
PrintablesEvilProphet

ESRack - Module - Ubiquiti UniFi Switch Flex Mini

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
159
Polubienia
25
Ocena
0
P
PrintablesGajdy

Flag of The State of Israel

Two colour flag of Israel Do not forget to share Your print! Support Israel! Donate for save lives: GB Maged David Adom: https://mdauk.org/donate/

Pobrania
157
Polubienia
24
Ocena
0
P
PrintablesSharkovich

Truvativ Descendant/Sram Crank Boot

After switching my crankset I was in the market for this little protector thingy. After printing absolutbrent 's design, though it fit nicely, I was not 100% satisfied with the design, so I remade it. Should also fit SRAM NX crankset,…

Pobrania
157
Polubienia
20
Ocena
5
P
PrintablesEvilProphet

ESRack - Module - MikroTik hEX RB750Gr3

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
155
Polubienia
14
Ocena
0
P
PrintablesRhoboto
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
155
Polubienia
41
Ocena
5
P
PrintablesOhad Eytan

Israel Map

Simple version of Israel map

Pobrania
153
Polubienia
13
Ocena
0
P
PrintablesEvilProphet

ESRack - Module - Netgear GS108GE

Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…

Pobrania
153
Polubienia
16
Ocena
5
P
PrintablesDavid Kahler

ESRack Customizable Device Mount

Make your own custom ESRack device holder by just plugging in your device's dimensions! Go to this OnShape project Copy it to your account Change the variables at the top left to the dimensions you need (DeviceWidth, DeviceHeight,…

Pobrania
143
Polubienia
47
Ocena
5
P
Printableswoelpi

SRAM AXS bleed block

My old bleed kit didn't have this new bleed block. So I did make my own one instead of waiting for a online ordered one. It should be compatible with these brakes: This is NOT an official posting by SRAM.

Pobrania
143
Polubienia
9
Ocena
4,5
P
PrintablesMike4D

SRAM AXS Disc Brake Caliper Alignment Tool

Don’t expect it to work 100% of the time—not even 50%. This tool WON’T replace visual/audible alignment. I don’t even know why I designed it; it may work sometimes. Fits SRAM RED/Force/Rival and others AXS groups. The 4 mm hole is only…

Pobrania
142
Polubienia
12
Ocena
0
P
PrintablesLgrizzly

Sram DUB Dust Shield

This is a replacement part for the plastic dust shields that come with SRAM DUB bottom brackets. O-Ring groove include (be sure to take this off the old dust shield!). I recommended printing in PETG with a small layer height (.05 or .1…

Pobrania
138
Polubienia
7
Ocena
0
P
Printablesdodasch

SRAM Pulleys 12s - 14t & 12t

add your prefered bearing (626ZZ) and glue the two halfs together with some super glue I have a SRAM Eagle AXS Drivetrain, everythings works well so far. I printed the pulleys with ASA

Pobrania
137
Polubienia
26
Ocena
0
P
Printablesmichal00ss

Sram DB8 brake pad spacer (20mm Large)

Hi, I modified ' Piketooth ' pad spacer model to fit Large 20mm SRAM brake pads. I only tested it with my SRAM DB8 model and it fits great (in my opinion more handy than stock black spacer that came with the brake). I think it will also…

Pobrania
136
Polubienia
19
Ocena
5
P
PrintablesCamPaine

SRAM AXS Charger Wall Mount - 1 Charger - Short

This is a wall mount for 1 SRAM AXS charger. I have taken the original file and have taken 5mm off the top. Thanks to Trimetric for the original fusion files. If you have any problems with the fit let me know and I can change the…

Pobrania
135
Polubienia
13
Ocena
4,75
P
PrintablesPisdomin

I STAND WIT ISRAEL Molle

Can be printed arbitrarily from any material.

Pobrania
132
Polubienia
73
Ocena
5
P
Printableshaimbilia

israel forever!

israel forever!

Pobrania
132
Polubienia
82
Ocena
4
P
Printableseagleeye

SRAM cranks bumper

These bumpers are fitting the currend and older SRAM cranks. They are styled not like the original SRAM bumpers, I used the design of my e.13 crank bumpers because these are a bit thicker. My current version is printed in TPU, you may try…

Pobrania
129
Polubienia
21
Ocena
0
P
PrintablesLXZ

NUKI B-PLATTENHALTER/ADAPTER FÜR SCHMALE TÜRSCHLOSSRAHMEN

Nuki Smart Lock Tragrahmen für die B-Platte Diesen Rahmenadapter habe ich für mein Nuki Smartlock angefertigt. Denn mein Türschlossrahmen war zu schmal für die B-Platte allein. Dadurch hat sich die Platte irgendwann vom Türschloss…

Pobrania
129
Polubienia
4
Ocena
0
P
Printablescmh

SRAM 12t X-Sync pulley for 1x drivetrains

There are a ton of jockey pulleys here on Thingiverse, but most of them are the older 11t design. I recently managed to smash up two SRAM jockey pulleys (no idea how, the derailleur was fine) and I found out that replacement pulleys were…

Pobrania
127
Polubienia
42
Ocena
5
P
PrintablesCikro

Transportlock for SRAM G2 Brake

Transportlock for SRAM G2 brake if wheel is disassembled. Prevents brake pads to get lose.

Pobrania
127
Polubienia
7
Ocena
5
P
PrintablesAdrian Glover

SRAM AXS Battery Blank with Keyring Hole

Allows for a "Remove Before Flight" tag on all current SRAM AXS derailleurs.

Pobrania
126
Polubienia
11
Ocena
5
P

LEGO Israeli M38 – 4x4 Truck

Israeli M38 – 4x4 Truck This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.

Pobrania
124
Polubienia
41
Ocena
0