4680 modeli
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
An adjustable LST clip that locks into place. I've designed to minimize the number of overhangs. I recommend printing with supports with overhang threshold set at 40 degrees or less. Supports should only be needed on the bottom of the…
I live an an apartment with ancient warped parquet flooring and my Lack based printer enclosure kept wobbling about. I designed these height adjustable feet as a solution! I used 3 perimeters and 20% percent infill at 0.2mm layer height.…
Furniture legs with two heights to choose, 25mm adjustable to ca. 35mm and 55mm to ca. 80mm. (I recommend checking out the redesigned model on my profile with more heights available and improved threads)…
Nativity: Stable with thatched roof and covered supplies. Split - Gule together sections. or use the version that is complete to resize to your liking.
Trying to copy or sketch larger curves and contours? Try my Flexible Contour Duplicator : Lacking the steady hand to sketch the perfect curve? Always starting your curve with confidence only to miss the end mark of the sketch line? Worry…
Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
This is a fully adjustable spool holder designed to be screwed down onto your enclosure. It can take spools from 40mm to 180mm width (almost any spool you can find on the market!). A gear system links the left and right side together, if…
EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…
This version is a remix from the 2019 original from Thingiverse. https://www.thingiverse.com/thing:2786671/files I made an effort to upgrade and remix it cause I Think this is easy, and far away, the best Y-Tensioner Mod for prusa. Only…
Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use. Designed to use…
Manufacturing instructions: Material: PETG or PC Blend 3D Printer: FDM 3D printer, print time 10,5 hours (with MK4S) Slicer settings: 0.2 layer height, print each part separately, 6 perimeters, 60% infill, no supports. Post processing…
Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…
An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.
Printing instructions: PETG Layers: 0.2mm Infill: 40% Perimeters: 6 For protection and better grip, you should attach self-adhesive felt to the back of monitor_connection_part_1 .
Detailed Description: This rod compass is a practical tool for marking large circles on wood, metal, or plastic. It clamps onto a profile such as a wooden strip or a spirit level and allows diameters from approx. 85 mm up to over 4000 mm…
The stand does not interfere with working on a laptop. project with space for slip rubbers. Can be used with laptop case. Sugestion: Infill: 10-15% Honeycomb without top space on sides Inspired by…
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Eine stabile und einstellbare Stütze für Pflanzen, die ich nutze, wenn meine frisch geplanzten Küchenkräuter noch Halt benötigen. Um die Klammer für die Pflanze zu bewegen, hinten gegendrücken und die Stütze bewegen. Oder es auf eine…
I wanted a DIN mount for my Arduino Uno that was: easy to print quick to assemble adjustable and doesn't need any extra standoffs So I developed my own in OnShape. The clips can be adjusted so that the mount can face in any four…
Edit V2 28.7.2023: Eine bessere Version des Oberteils wurde mit besserer Passung und stabileren Hebel hinzugefügt. A better version of the top has been added with a better fit and more stable lever. I built a new bike light mount for my…
This model is sized for the Lilygo T-Display S3-display, not the Lilygo T-Display-S3 AMOLED device which is slightly narrower. If you're interested in the model for the AMOLED device it is available here . Required: a Lilygo T-Display-S3…
For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. It mounts to the Y…
Adjustable stand to hold laptops in vertical position for storage or use with a separate monitor. Build Info: PLA 0.3 layer height 2 perimeters / 30% In-fill/no supports
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: Yes, for holes Support Type: Organic/Tree Supports Print Orientation: Default as modeled Raft: Optional Brim: Optional The fastener…
Webbing Adjuster for securing straps and a g-hook to connect to additional webbing. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is slightly…
The Adjustable Corner Drill Guide offers precise drilling for corners. It's parametric, customizable, and prints easily without supports. Features: Fits 1-8mm drill sizes Current files fit 2, 3.25, 5, and 6 10mm spaced holes for accuracy…
This mod changes the axle and the rod of my Windmill Designs to a horizontal print! You can print now all parts horizontal with a press fit connection, to make the whole Windmills "ultra stable". Assembly:…
An adjustable door safety catch that prevents your door from fully closing, saving thousands of children's fingers from being slammed in a door! Fits any standard 35mm thick door. To adjust the door opening, slide the device further along…
https://www.printables.com/de/model/473483-bikemate-adjustable-bike-light-mount-with-bikemate I would be very happy about a Make, Like or Share! Happy printing!
Large support for perfect stability without adding extra weight. Height is adjustable using pre-drilled holes with m4 screws. For North Americans, the sliding foot can be replaced by a 2 "x2" wooden one, cut to your requirements. The…
This robust tool allows you to glue panels of varying thickness, up to 25 mm, squarely. Printed in PETG, requires few supports. The screw must be imprinted vertically, placed on the head. It has a reserve for sticking a 3 mm diameter…
Adjustable spool holder. Stepless / continuous width adjustment from ca. 30mm to 90mm. Assembly according fotos. Stationary parts are fit but glue ir recomended. Additional assembly parts: 1pcs. Screw M4x12 2pcs. Screw M4x16 with…
My son likes to ride on the e-bike with me, but he has nowhere to put his feet while riding in front. So here's pegs! The peg itself has grooves to adjust the angle. It should bolt together on the frame with: 2 - M10 x 100mm bolts 2 - M10…
Adjustable door lifter for installing and lubricating hinges on doors.
This is a simple phone stand that can also hold Ipad. Print in place, and no supports hope you like it!!! I will make a new version at 20 downloads
Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…
This is an adjustable grappling hook whose hooks can be adjusted in angle and fixed with an insertable plug. There are thin and slightly larger hooks as well as the step files for your customisations. Print the centre part of the…
This 3D model is a stackable storage box system designed for Prusa XL 3D printers. It features a removable grid that fits into the box using a docking system with pins and sliders built into the walls. Primarily made to organise small…
Webbing adjuster with a clip point for securing straps or to connect to additional objects. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is…
This strap tension hook allows you to securely tighten a strap by threading it through two lower slots and looping it back. The strap is locked by hanging it on the upper hook, creating tension without the need for a traditional buckle.…
Aside from the obvious solution of using prusa slicer to print this in two parts, I wanted to make something that can be separated and reattached many times. This is because I am planning to print many copies of this game to gift to…
A simple but beautiful box with dimensions 20 cm x 10 cm x 8 cm (length x width x height). The wall thickness is 2 mm. For that reason you will need some filament for printing. :) Due to round corners inside the box, the box is easy to…
Supplement to adjust the width of the bracelet with the shackle from mobiobi. Download the shackle at mobiobi directly. The extension can be printed without support and border. Preferred material is PETG or PC
There are several chain link fence camera mounts, but none worked exactly as I wanted, so I created my own. I needed a GoPro mount that I could use to hold my camera on the fence to record and stream my son's little league games. This one…
This is a remix on a bobbin storage box. I initially printed that box, but my wife immediately snapped of the latch. So, I remixed it to use a magnetic latch instead. The hinge pin is just filament. Just press a length of filament through…
Dies ist eine Sortierkiste mit Schnappverschluss und verschiedenen Einsätzen. Somit kann die benötigte Fachgröße einfach zusammengestellt werden. Die Einsätze haben eine innere Höhe von 25 mm sowie eine Breite und Länge in einem Rastermaß…
Hello, Today I have Feed Support 50mm for you. Suitable for raising or adjusting the legs of a table, chair, or bench. It can really hold a lot of weight! I used PLA/PETG Basic as the material No need to use supports If you are interested…
Print all the pieces. Assemble the pieces. Move the gears together. Tighten the nuts (½ inch driver socket recommended).
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I only recommend enabling supports in the middle of the underside, if they attach to the outside of the stand, it will be ugly after you remove it. I used…
This project contains An alternative, adjustable tenting stand for a Sofle Choc Case I made: https://www.printables.com/model/1286514-sofle-choc-case-and-tenting-stand For both stands, left and right, you need: 8x M3x4x5 brass heat…
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
Please consider leaving a review (with picture of your print), or a like. This really motivates me to keep uploading my models :) Description This adapter allows you to mount a standard 120mm fan to the ceiling with an adjustable tilt…
For model request or idea, send me email on this adress : [email protected]
Kleine Säule um z.B. im Eingang von Bienenbeutenkästen Wetterschutzvordächer anzubringen als Schutz vor Regen um die Einfluglöcher trocken zu halten. Oder für schmale Unterstützungsprojekte. Zwei Varianten eine mit glatter Oberfläche eine…
Adjustable hook to attach Christmas decorations e.g. on garage
This model is a fully adjustable counter mount designed for payment terminals and similar devices. It features a 310° base rotation and uses a friction tilt hinge, allowing you to tilt your device at any angle - just tighten or loosen a…
French Door locking pin Manufacture/mode: Giesse 02167 Notes: Used as the top & bottom locking pins for French doors, swing doors, typically exterior doors. You may see this part in Eurotech French Doors. 3D Print Notes: - Material Type:…
Halter / Ständer für Mess-Tabletten, Küvetten und Stössel. Für ein Photometer zur Wasseranalyse in der Bädertechnik. Die Stellfläche für die Küvetten und Deckel ist durch das Gitter und auch im unteren Bereich von vorne und hinten…
This adjustable holder securely mounts a 28 mm handle USB hand fan to a pole or stand and lets you easily adjust the viewing angle. The mount consists of a two-piece clamp and a fan holder connected by a pivot joint. Available Clamp Sizes…
I made a ACME replacement nut for a Hästens adjustable bed. It should also fits a Maxwell Kbed. Print the model solid otherwise it might not be strong enough.
If you are a developer, and you don't want to hide the proximity sensor with your hand then this extension is for you! Here are the assembly instructions:
It is a simple mechanism that provides column-like support for structures that require it. The support has a dynamic height that can be adjusted in place of use to lock it. To change the support height, fix it with your hand on a surface…
NOTE: After reading this paper on the effect of Tail Dihedral on stability, and experimenting on my design, it seems that it is a great idea to angle the Horizontal Stabilizer into a negative dihedral (anhedral). Or in other words, for…
A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand. This is a fully printable design, so no other hardware is required. With the largest base (as shown in the pictures) the clamping…
Update A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me…
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Closed feet height = 50 mm Extended feet height = 80 mm Tested with PLA: 0,15 layer height; 15% infill => 75+kg load per feet was no problem :)
Lets you drill into something at a specific angle. It's quite small, the guide hole is 8mm. Optional: add an M3 screw to lock it in place. Or else it will just swivel around. Assembly Instructions: see gif
I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution. I got inspiration for…
Many parts of the Mini benchdrill are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. This design has an automatic start-stop feature…
Edit 5/18: Changed license to comply with the original Edit 7/4: Added additional folding parts for rigidity and improved clearances. Very thin folding phone stand that can slip into a wallet or the back of a phone case. Works fine with…
Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…
This is a stylish laptop stand that allows you to use the computer at 4 different angles but also allows you to completely fold it for easier storage and transportation. Print two pieces and place them underneath your laptop. You can…
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) Height-Adjustable Feet with Ball Joint — M20×2 Thread (Heavy-Duty, 75 kg Load Tested) These height-adjustable feet are designed for…
Printable without support. Holes for microphone included. Filament need 12m (2 perimeters 15% infil). Versions A, B, C, D, I, J, K, L, Q, R, S, T…..For phones with cover, max phone depth 21mm E, F, G, H, M, N, O, P, U V, W, X…..For phones…
Big and strong furniture leg. Its height can be adjusted after installation, from minimum 70mm to almost the double. Needs 4 M6 or M8 screws to be mounted. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No…
Another satisfying fidget toy. All parts are printed with 0.4 mm nozzle and 0.2 mm layer height no special settings are required. I simply used pieces of filament for the axes of the moving parts. Assembly The image below shows all the…
I have uploaded a new file with the updated main body, and also a new screw with the file name "screw update." Someone pointed out that they were facing a problem screwing the parts together. Because I only designed half of the part and…
Vertical Laptop Stand Cradle up your laptop vertical and get your desktop neat. Designed for laptops and IPad/Tablets, put two devices on the stand at the same time. Adjustable Model the exported modular stand consists out of the base and…
*UPDATED the screw thread Adjustable self-watering spike for indoor and outdoor use. By using a plastic bottle you can provide the garden plants with an adjustable drip irrigation system. By turning the valve you can adjust and control…
Hi, this toy is tiny (19 x 32 x 3 (3.5) mm) and has a 3.5 mm hole on one side so that you can add it to your keychain. The switch in the middle has two positions, when you push the switch in upwards it snaps into its new position. If you…
Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…
This model has been updated with a V2 version that requires M3 hardware! A .STEP file is now also included that you can use as a starting point for custom dovetail add-ons. Thanks to @bequ3 for his comments and improvements ;) I needed a…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
About This is a funnel for easily filling the Adjustable Spool Holder for Silica Gel / Spool Weight with silica gel. It also fits the hygrometer version of course as it has the same lid dimensions. It was designed so it can be easily be…
This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
Changelog 2024-12-21 v1.1 fine tuned print settings; cc 0.17; ct 0.18 2022-12-02 v1.0 initial public release Neatly organising the world of cables has lost a lot of hassle with these reusable cableties: The bistable mechanism quickly…
After seeing many people's problems with my previous fidget switch' s spring, I decided to create a new variant that allows you to adjust the spring's tension whenever you want. Some days you may want a soft, tactile click; other days you…
This is my first try to make a parametric model, this means you can change the model's size by changing a parameter. For this you have to open the .f3d-file in Fusion360. Then go to the “Modify”-menu and click “Change Parameters”. There…
Adjustable Feet Practical adjustable feet, perfect for DIY projects, cabinets, tables, or 3D printers. The threaded design allows you to easily adjust the height and keep your furniture or machines stable on uneven surfaces. Versions…
Very detailed instructions can be found in the PDF file under “Other Files”.
This is an adjustable gantry mounted nozzle parking spot and brush for Vorons (2.4 & Trident) using bambu lab's silicone wiper. New Version! Now made more modular and using high temperature silicone RTV to further improve nozzle heat…
Whether you need a small adjustable holder for a pocket light or a new mount for your microphone, this model does it all, is adjustable (mechanical lock, not a friction lock) and clamps right onto any surface. Should be able to carry…
Description Adjustable GPU Support Bracket This universal GPU support bracket is designed to provide stable support for heavy graphics cards, such as the RTX 4090, and prevent them from sagging or damaging the PCIe slot. The support…
