1172 modeli
Hello this is a fun 3D Printed RC project that's a great way to get hands on experience with standard DIY development electronics. This model specifically is an updated/improved version of the MiniSkidi V2.0 Model. Updates include tracks,…
A micro sized skid steer digger 10mm in width. See the 20mm version if this one's too small. Scratch remodeled version of “Gophergames” Skid Steer to fix model geometry issues, work done in Solidworks. This one complements the Tiny Wheels…
*DISCLAIMER: This is a Work In Progress Project, so STL or code and program can change, also it is a complex build for expert thinkerers. I'm actually doing some universitary exams, so I have a little time to work on the project, but if…
This is a part of the cabin design of my Unimog RC project . I'm providing the 1/10 print files but also the 1/5 in case you want to use it outside the design. I'm using height range in the print files in order to get the top part as nice…
20.1.2024 Another week point found. :) So here is version 3. Added rib to Slider to add overall stiffness Adjusted geometry of pins that push joy con buttons. Now you can feel and hear response when you push Paddle. bgcode and project…
I created a fully functional steering for Landy Mini Thank you 3D Sets for the gorgeus modell, and thank you kokynator for the Stiffer Springs Remix if you want to build this Mod you will need 9x M3x10mm allan bolt 3x M3x8mm allan bolt…
My former tie rod design also had 2 ball joints, but due to their vertical orientation (the screw tube orientation), movement was limited as the screw tube would come in the way of the joint at a relatively small angle which lead to…
11/13/2022 UPDATE I removed the old handle and uploaded a new version. My second version cracked so I increased the height of the locking tabs by 2mm. It fits tighter now. I made the handles more printer friendly and they are less…
Made a quick logo for the End Gate of the Skid Steer Loader made by AN3DRC. https://an3drc.com/e-shop/construction-vehicles/tracked-skid-steer-loader https://an3drc.com/e-shop/construction-vehicles/wheeled-skid-steer-loader recommend…
Of course there are several other Mag-Shifter Mods out there, but one of the main issues i had with them: They all relied on glueing magnets to the plastic. Which i think is neither nice to look at, nor very long term stable. Since these…
a fully printable air vent based off the XF / EA - ED Falcon's Interior design.
this is a remix to make the plug fit a 32mm steerer tube
was expanded from the original with a pressure shell. Since I couldn't print the steering wheel with supports to satisfaction. Printing without supports or anything like that. After the printing break, remove half the steering wheel and…
Simple M10 knob for screw with hex. Use small hammer to insert on the screw as it is tight (hit screw not knob). My son use it for mount computer steering wheel, as he lost original screw. UPDATE 2024-02-04 Bigger version of lower cnob.
This is a wall mount to display steering wheels on you wall and allow you to easily remove them. They should be deep enough to also allow you to put the horn and horn ring on as well. There are 4 flat backed holes for bolts and 2 counter…
Cover for steering wheel of G29, G920, ... Cupra badge Printed in two colours with one extruder (colour change) when using gcode. Gcode files for mk3s+ and mk4 with single extruder. Happy Printing!
I made a version of this using the orignal mounting plate and sheet metal years ago. I've since converted the Burns to electric and after seeing the 3s battery holder I made, someone was interested in the servo mount, so here it is!…
I will up load a adper to fit this specific toy that glue onto the back of forks but if want you make your own adapter to fit a different model print pla + or petg
Motivation I wanted to run a bunch of accessories on my handlebars, so I needed to move the computer mount which originally spanned across the stem. Solution Uses the original hardware, which were button head screws. 2023-10-11 Lost the…
The stock tail wheel assembly often breaks. This pin pits around the assembly with added bulk.
Serve as toy or decoration. Maybe it could be used in a go-kart project if it were modified properly :) require screws: 6x - 3mm x 10mm 7x - 3mm x 15mm Printer setup: Nozzle diameter 0,4 10% infill Layer height 0.20mm no supports
The Park CRS-1 is a great tool, but only works on 1" and 1-1/8" tapered steerer tubes. This print will allow you to dig the CRS-1 out of the bottom of your toolbox for use on tapered steerers. Fits over common tapers on Fox and Rock Shox…
2 (4+) models to make cover of steering wheel center for Zetor Proxima, inner diameter 55mm, outer 62mm. I use ASA for black pieces and PETG for color logo and font, models also contain plate to visually present position of each gear.…
We got some new LINAK Modules as replacements for very old ones which have a very differnt formfactor. So, to be able to screw it below the wooden desk, I created a new bracket. You only need a little support for the small lip. I printed…
spare part new stronger version uploaded in addition.. . adopt if you like - FreeCAD file attached…
I made a stm32 board mount to make it easy to mount on a sim racing wheel or use this mount to create any project. use: 4 m3x10 hex screw
To manually adjust steering trim of the AX24 Rock Crawler, since the stock controller does not allow trim adjustments of the rear steering.
Ford D5NN34673A (D5NN-34673-A) 100-series tractor, steering column trim. Made this for 1979 4600 with Q-cab, but likely to fit many others. Printed in PETG. Holes might need some adjustment, but fortunately they will be hidden.
Was asked to fix broken part on the Schylling Speedster - Silver Race Car Ride On Scooter Pressed Pressed Steel 2010. It's being donated to children. Due to strength requirements I customized many slicer settings, used a 0.6mm nozzle, and…
Gas tank spacers for the 1992 Ducati 851 and all 1993+ 888 motorcycles. These spacers allow the gas tank to be raised either 3.5 or 4mm, to clear the frame mounting bracket for an Ohlins steering damper. Spacers are placed between the…
dapter for the dual-spoke steering wheel from the Škoda Felicia , converting the original spline hub into a mount for an M10 threaded rod . Fits into the original ~25 mm spline hub of the wheel and creates a through-hole for an M10…
Hey everybody this is V2.0 of the MiniSkidi, this is a fun introduction to robotics if you dont have much experience. Below is a link to a step by step YT build video as well as a link to my website where you can pick up the electrical…
A mini skid steer digger 20mm in width. Scratch remodeled version of “Gophergames” Skid Steer to fix model geometry issues, resized to 20mm, done in Solidworks. Because the 10mm version is a choking hazard for small children this bigger…
UPDATE: I reorganized the files so they are easy to find in chronological order for printing and changed some file names for better understanding. I deleted the back plate file from the project due to confusion about what to print. I also…
This is a remix F1 Style Steering wheel for the Logitech G29, now allowing you to print the centre part in only one piece making it easier, faster and stronger to print. 3 parts to print: 1x “G29_Center” 1x “G29_Handles_Back” 1x…
Welcome to my design adventure! My goal was simple: design a car tray for eating/working that attaches to your car steering wheel; the catch: the final product print time should be less than or equivalent to ordering the equivalent tray…
I used 4 m3x30 and 2 m3x20 socket head bolts and nuts. I printed it with carbon fiber petg with 60% infill but I recommend the highest infill youre comfortable with. The grips are pla and 20 to 30% infill is fine for them.
Check LOG bellow for changed parts! _ INTRODUCTION This controller is a 3-axis + 15-button HID, designed with Euro Truck Simulator 2 in mind. It also works with other games. The steering wheel has 900 degrees of rotation and force…
attach to your ps4 controller and get racing
Project main site: https://www.thingiverse.com/thing:4891321 This is remix of Formula B1 - (Sim racing) steering wheel for Thrustmaster T300 RS wheel base. With other wheel mount or quick-release, this wheel could be also used for another…
DirectForce Wheel 🏎 📄 Description DIY Direct Drive steering wheel, powered by a hoverboard motor! This project includes a fully 3D printable enclosure, essential mounting parts, components list and a build guide, ensuring a solid and…
Skid-steer loader (Easy print - NO SUPPORTS) for some parts like seat, body, cage and axis caps use glue Print settings 0,2mm layer 3 walls (for axis use 5 walls) 15% infill (for axis and inner part of wheels use 50% infill) for long axis…
I made this simple phone holder for watching videos in the car when I wait to pick up my kid outside the school. It is NOT to be used whilst driving. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
Added V.2 models. I find the new design more comfortable. It is a bit lighter beacause it only uses 2 magnets. And the design is better because it should not get loose with time. 3D printed modification that makes your Logitech G29 paddle…
U can print this as one part in standing orientation.
GR.3S DIY Steering Wheel Disclaimer: This project has reached end-of-life status and will no longer receive updates or ongoing support. All current and upcoming projects are now available exclusively through my webshop . PERSONAL USE…
GT-R DIY Steering Wheel PERSONAL USE LICENSE ONLY Files are for personal use only, non-commercial and not for resale Copyright by KODAI Racing Wheel Features 300mm Diameter x14 Pushbuttons x2 Optional Rotaries x2 Magnetic Paddle Shifters…
Remix from: https://www.printables.com/model/333283-simple-brushless-rc-sport-hovercraft
Steering Wheel for Cardbox cars or where ever it might fit! thightening just be turning the knob down! Wheel is screwed down with a m6 Screw, the Knob with 2 M4x25er from each side.
This is a simplified model of how a car steers using a rack and pinion setup. To replicate this model you will need print: 1x Axle Left 1x Axle Right 1x Crank 1x Gear 4x Linkage Pins 2x Linkage 1x Rack 1x Steering Assembly Support 1x…
What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying around...also skateboard bearings superglue WARNING: over time the frame will create shiny patches on your…
AMR DIY Steering Wheel Disclaimer: This project has reached end-of-life status and will no longer receive updates or ongoing support. All current and upcoming projects are now available exclusively through my webshop . PERSONAL USE…
This is a modified steering bar which better fits the dimension of a standard DS3218 servo. Print with supports.
What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying around...also skateboard bearings superglue WARNING: over time the frame will create shiny patches on your…
Great steering wheel for any driving video game!! Made to fit an Xbox one controller, it fits perfectly and fits snug! Super simple to print with minimal supports and prints quickly! It uses a generic skateboard bearing for the center and…
Made this to wall mount my NRG Quick Release steering wheel when not in use. Printed at >50% infill No Supports needed Use 4x wall anchors to mount into drywall.
🔁 Compatibility The 3D prints can be used on any Logitech G29 , Logitech G920 and Logitech G923 . The only print that's specific to a Logitech variant, is the lower bezel , which at the moment is available only for the G29, or PS4/PS5…
Designed for a Logitech G27 Steering Wheel with a section of 29mm*32.5mm. Assembles as press fit with a 608 bearing. Prints nicely with adaptive layer height for the knob. You will need: M6x20mm Hex Head Bolt M6 Hex Nut 608 Bearing
Hello, here you can download a steering knob designed for Logitech G29 / G920. These parts are needed: 1x Hex Head Screw M5x35 1x Allen Screw M5x40 1x Thread insert Ruthex RX-M5x9,5
With this wallmount you can hang your steering wheels on wall. Steering wheel locks in place with Moza Quick release mechanism. PLA works fine for me, 15% gyroid infill.
Replaceable Steering Wheel Cover for PXN V99/V10 (PRO/ULTRA) To install, remove the hexagon head screws from the wheel and replace the faceplate. To assemble the handles, you will also need: 6x M3 x 20 mm screws (DIN 912) 6x M3 nuts
This project includes over 100 .STL files, the entire assembly .STEP file, Grip & Molding files, a DIY guide and more! You can get all the files from this public Google Drive link:…
Two different steeringwheel model that I design with my kids next to me so that the size and details fit what they wanted.
This project has wasted 20+ hours of my life. So please enjoy it and fix any issues you come across. Also feel free to improve and modify this design however. (Side note, this kit gives the exact same angle or a couple degrees more than…
This was designed to fit a 92-95 Honda Civic. It fits right behind the steering wheel on the ignition/steering column cover and you have plenty of room for the wheel to turn without hitting them. This likely works for quite a few cars but…
This design removes the teeth protrusions from the track and instead adds them to the wheel similar to how the excavator tracks function. This helps the system to be more efficient and keeps the track from riding up onto the wheel when…
************************************************************************************************* Dec 10-2023 Thumper axles have been updated for strength. The assembly videos for the old axles are still available in the description of…
Steering Wheel Stand for Phone or Tablet: Park & Watch Spending some time in your parked car? The steering wheel phone stand lets you quickly and easily set up your screen when you want to pass the time in your car. Simply unfold the…
xbox steering wheel to play video games
I lost one of the spacer bit for my g920 and decided to model the one I still had in fusion 360. Print settings I used: Layer height: 0.2 10% gyroid infill Brim adhesion
VW Golf MK2 GTI steering wheel miniature created to use as a keychain. Printed with 0.2 nozzle.
Epoxy Resin Mud Power Mixer Blade Drill Tool / Plastic Paddle Replace Resin Mixer Drill Attachment
F1 Mclaren MP4-30 2015 Steering Wheel. Mclaren MP4-30 2015 Steering Wheel full scale replica. 129 pieces relatively easy to print with the 0,4mm nozzle and simple assembly. It is a model that requires a little more time than a single…
This bolts on over the front end of the steering rack on the TT02 and takes out some of the side to side slop. The stock screws you remove to fit this are too short, you'll need ones somewhere around 15-16mm. When I finished my TT02 build…
Summary I started with just a few minor adjustments to improve printability and make it work with PCB I already had. But it quickly snowballed into a lot of different improvements for printability, bug fixes in firmware, optimising BOM…
Here it is the replica of Lewis Hamiltons and George Russels steering wheel. This is a static (a decorative design) model and it is not designed for simracing or similars. I hope you like it. I also leave you here the stickers that I have…
Your child want to drive a real car or bike - but is waaaaaay to young? No problem - with this steering wheel! Just print the wheel & stand and add a screw (6mm diameter / 50mm long / max 14 mm head) with 2 nuts to keep it safe. The wheel…
this can be made with two colors or with one color. Recommended settings: Layer height: 0.2 mm Supports: None Nozzle size: 0.4 mm Infill: 100% or less Materials: PLA Brim: None
This model is compatible with the lego system.
Credit to F1 Steering Wheel by Ata Mert Aka. It is a 100% accurate engineering model with over 200 pieces. Every, screw, nut, circuit board, screen, etc … but it has many 2D surfaces that can't be 3D printed. Anywhere that was carbon…
Fully 3d printed design for the PS5 mini wheel. No need for bearings/springs/shafts Category: Games
This model was built by myself from scratch, but I made reference to @Referentiel 's Wheel Pro and added an adjustable vise for it to hold Joy-Cons both with or without protection case. I also added holes for @LordS_809327 's Paddle…
I didnt find any suitable thumbsteer for TQ controller (none on Printables) so I made one myself. It simulates the look of a beadlock wheel. Just replace original wheel, reuse the foam (it fits) and you are good to go. This wheel has less…
This steering wheel is really big (~2h print time). It will block your view on the bottom right part of the lcd :D
This model is compatible with the lego system.
I got a Wahoo Elemnt Bolt to replace an old and quirky Garmin Edge 500, and discovered that although the mount looks like a Garmin mount, it's rotated 90 degrees. I had been using Bryce's Garmin stem mount and he was nice enough to rotate…
add al the components together! start racing! :)
Cutting guide for your bicycle fork's steerer tube. Inside diameter is 29.1 mm, and the thickness of the blade slot is 2 mm. This should work with most common ceramic/carbon cutting blades. There's a small insert that can be used to…
Hi, I made a 3D model of a SG90 Servo Steering Gear, 20 tooth, 0.5 Mod 20PA. This is used in my project '35 KPH FAST Lego RC CAR - Lego RC Car Part 2' on my YouTube Channel TinkerTown. Check out the details there.
Skid steer or Bobcat profile Category: Other
Tištěno na tiskárně Prusa I3 MK0 - 3mmABS
Die *.stl Datei muss gegeben falls repariert werden. Es empfiehlt sich mit Stützgeometrie zu drucken. The *.stl file may need to be repaired if necessary. It is recommended to print with support geometry.
I made this one for my DIY tractor, to help with steering this hell-machine. My hint for you is to print together top holder and ball - just use supports. It will not be possible to combine these two later, also no option to separate (but…
This model is compatible with the lego system.
Two Versions Available: Version 1 - For GS / FSR / ES / SCV12 / MISSION R Wheels Version 2 - For RS / CS Wheels Installation Instructions: Step 1: Pull the quick-release lever on your steering wheel toward the wheel face until it locks…
Axial SCX24 and AX24 compatible stock width Steering Link with included Drag Link I was wanting a color matched Steering and Drag link for my Orange AX24, a few moments later I had these printing for my enjoyment, in the color of my…
