Wyniki wyszukiwania: strip

Sortowanie

4414 modeli

P
PrintablesLuKowalski

LED-Strip soldering tool for 8, 10, 12 and 14 mm wide LED strips

Sometimes it's necessary to solder wires directly to LED stripes instead of using connector plugs. I'm using this tools especially to make connections if I use the LED stripes in wet or damp environments to prevent the contacts from…

Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
10 184
Polubienia
7376
Ocena
4,9
P
PrintablesMiguel M.

LED Strip Clip

LED strip clip. Simple and works very well. Screws on one side only, so very compact. fits 10mm strips. Do not attempt to print on its side, screw will split the layers and crack the print….. I printed 24 of these all at once with no…

Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu

Pobrania
9177
Polubienia
4228
Ocena
4,84
P
PrintablesPrusa Research

Striped lizard (multi-material)

Author: Cipis https://www.prusaprinters.org/social/18/prints 3-color remix Remix for multi-material printers. Print takes roughly 3 hours and 40 minutes at 200 µm layer height with 3 materials (Ext. 1 – Green, Ext. 2 – Blue, Ext. 3 –…

Wydruk około 2,84 €–3,47 € nettoWstępna wycena jednego wariantu

Pobrania
7166
Polubienia
444
Ocena
4,87
P
PrintablesSpatula

Honeycomb 3M Command Strip Mount + Wall Double Hollow Insert

I liked this command strip mount for the honeycomb wall , but I prefer that the command strips be mounted to the side of the wall (vertical) rather than the top (horizontal). Also, I use 4 wall segments in a grid, and needed a double…

Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu

Pobrania
2401
Polubienia
602
Ocena
5
P
PrintablesBobMcGlobus

Cable tie - powerstrip holder for Multiboard ("Underware" cable management system by HandsOnKatie)

Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)

Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu

Pobrania
1699
Polubienia
329
Ocena
4,33
P
PrintablesEnigma

Wall hook for 3M Command strips (small)

If you're anything like me you bought a few wall hooks, used them once, and don't know what to do with all of the extra adhesive strips. This wall hook is designed to fit the small 3M Command strips and hide the pull tabs like the…

Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu

Pobrania
1085
Polubienia
178
Ocena
4,71

Remixed Double Hook 3m Command Strip

A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.

Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu

Pobrania
569
Polubienia
63
Ocena
4,8
P
PrintablesMiguel M.

Dual LED Strip Clip

This is a remix of my own LED Strip Clip https://www.printables.com/model/68805-led-strip-clip This one allows you to mount two strips side by side with a single clip/screw. Great for the undeside of a lack table. Printing Print a few of…

Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
552
Polubienia
236
Ocena
4,86
P
Printableskrcm0209

Command Strip Hanger for Canvas Prints or IKEA RIBBA Frame

The IKEA RIBBA frames included wall mounting hardware is about 1 inch deep set into the back of the frame, making traditional hanging with a screw difficult. To make it easier to mount IKEA RIBBA frames, and by extension, canvas prints, I…

Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu

Pobrania
534
Polubienia
79
Ocena
4,5
P

3D-Printed Electronic Snowflakes using WS2811 LED Strip

Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…

Wydruk około 3,64 €–4,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
462
Polubienia
109
Ocena
5
P

Lithophane LightBox with LED-Strip

Since i like the effect of lithophande images very much and it is very easy to print, i decided to create a matching light box with led strips. The box is also easy to print without support structures and is simply glued together with…

Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu

Pobrania
337
Polubienia
148
Ocena
4

Printable Mobius Strip - Clicks together

Inspired by Teaching Tech's bendable prints, I created this mobius strip. The dimensions are not from his design, so it's actually completely made by me. There is a clip at each end, so after printing you can bend and click the strip…

Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu

Pobrania
278
Polubienia
61
Ocena
4
P
Printablessteffenbew

LED Light Strip 45° Mount

LED strip mount to clip a light strip in a 45° angle. I designed it for a Philips Hue Lightstrip to be mounted behind a cabinet. The mount can be taped to an object, but in my case I decided to drill holes afterwards and mounted it with a…

Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
250
Polubienia
63
Ocena
5
P
PrintablesLuce

Command Strip Backpack Hook (or other stuff)

Wanted a Hook to hang my empty backpack on at work. Didn't want to put a hole in the wall. Thought I'd try to use 3M command strips. Wasn't sure if it would be strong enough, but so far, so good.

Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu

Pobrania
233
Polubienia
25
Ocena
5
P
Printablespaul020559

Plasticard Strip Cutter

Plasticard Strip Cutter Filament: PLA Layer height: 0.15 mm Infill: 15% Supports under the block and under all nut gaps on the print plate Brim only required around the blade_cover By the way the 5H 48m time quoted above is for all the…

Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu

Pobrania
208
Polubienia
40
Ocena
0
P
PrintablesCelta

IKEA ALFTA/Tesa Power Strips Picture Holder

This is a remix of Livingroom Workbench 's design for an IKEA ALFTA. I made some changes to the model to make it better compatible with Tesa powerstrips, which are a bit smaller than IKEA strips. The model comes in two versions: The…

Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu

Pobrania
203
Polubienia
18
Ocena
5
P
PrintablesMichael

Clip / holder for Hue Outdoor led strip

The Philips Hue outdoor LED strip comes with clips with which the strip can only be mounted on a surface with 90° degrees angle to the LED strip, but not one with 180° (e.g. a vertical surface or wall, strip pointing up or down). These…

Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
175
Polubienia
17
Ocena
0
P
PrintablesJustinline

Power Strip Mount for Uplift Desk

Use this pair of brackets to mount a power strip or other accessories to the underside of your Uplift desk. It can be mounted to the desk frame crossbar's threaded holes with M8 x 10mm cap screws. The difference between the -1 and -2…

Wydruk około 1,13 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
174
Polubienia
31
Ocena
5
P
Printableslufa

Power strip holder for IKEA KOPPLA

Die Wandhalterung dient zum senkrechten Befestigen der Vierfachsteckdose an einer Wand oder einer anderen ebenen Fläche.

Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu

Pobrania
133
Polubienia
20
Ocena
5
P
PrintablesvmLOGIC

Soldering buddy for LED Strips and/or wires

Get ready to meet your new best friend for soldering LED strips and/or wires! I had to find a suitable sidekick for my upcoming soldering marathon, so I printed and tested two models that seemed promising. But alas, they were too…

Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
95
Polubienia
21
Ocena
0
P
Printablesdick

Skadis T-Nut mount for Klein Wire Cutter and Stripper

This is a mount for holding a Klein Wire Cutter and Stripper on the IKEA Skadis board. It uses the Skadis T-Nuts mounting system from 6d6178 . You will need two nuts and the M2.5 hardware to attach them. I use M2.5x16 screws. No supports…

Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
92
Polubienia
8
Ocena
4,67
P
PrintablesCrazyRonny

LED Strip Channel with Diffusers - include corner joiner end end cap

Don't find what I was looking for to put in my Lack Table Enclosure, so I created this one. I try a few good design I found around but none was really what I was looking for… I don't want to see any screw, I also want a track to put my…

Wydruk około 1,26 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
76
Polubienia
18
Ocena
4
P
PrintablesDenver

3M Command Strip Coat / Clothing Hook One Piece

Modified to work with the picture hanging Velcro Command strips. *Warning don't use with non-Velcro strips

Wydruk około 0,63 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
75
Polubienia
8
Ocena
5
P
PrintablesPolyForge

Zebra – Striped Wildlife Sculpture

This zebra sculpture captures the unique beauty of its striped coat and elegant posture. Perfect for collectors, educators, or nature lovers looking to add a safari touch to their shelves. Printing : Suitable for both FDM and resin…

Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu

Pobrania
70
Polubienia
15
Ocena
0
P
PrintablesMax Wamsley

90 Degree LED Strip Channel Connector Adaptor - Connect 2 LED strip channels at 90 degrees

Simple channel to connect two LED strip channels at 90 degrees. Printed with 0.15 mm layer height and no supports.

Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu

Pobrania
67
Polubienia
4
Ocena
0
P
PrintablesMartinRowan

Angled (V Type) Aluminium Profile LED Light Strip Clips for Ikea Platsa Enclosure (Pinmount)

Using plastic pin mounts to secure angled aluminium LED extrusion in the Ikea Platsa enclosure. Simple screwless installation using pin-mounts that fit into the existing holes in the side of the enclosure. Printing Enclosure base mount…

Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
66
Polubienia
7
Ocena
0
P
PrintablesMJ

Power Strip Mount

Tidy desk, happy brain 🧠✨ This U-shaped holder lets you mount a power strip or similar rectangular item under a desk, on a wall, or inside a cabinet using two countersunk screws. The open top lips keep the strip securely in place while…

Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu

Pobrania
63
Polubienia
11
Ocena
0
P
PrintablesAnschuetz1991

Clip for BFT LED IP67 Stripe (WS2814)

I made a holder for my LED strips from BFT Lightning. In my case, it fits the 24V WS2814 RGBW LED strips with 60 LEDs/m and IP67. The LED tube sits fairly loosely in the holder, but it works well enough for my needs. The bar that holds…

Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
61
Polubienia
9
Ocena
0
P
PrintablesAn7yIsHere

Slatwall Power Strip mount

A slatwall designed power strip mount which can be slided inwards and carry a powerstrip without restricting any access.

Wydruk około 1,48 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
61
Polubienia
30
Ocena
0
P
PrintablesNdls

Koppla Power Strip Holder (Lack modified)

Wife wanted me to use the 3D printer to fix the problem with the power strip sliding around so I modified two awesome models to solve the problem since I couldn't find a tidy solution. My modeling skills suck so if anyone can clean up the…

Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu

Pobrania
59
Polubienia
3
Ocena
0
P
Printableskennyd1gital

Modular Wall-Mounted Magnetic Knife Strip

A modular wall-mounted magnetic knife strip for organizing and storing kitchen knives. There are three different strip lengths, an end cap, a connector for mid-span support on really long sections, and decorative plugs to hide the…

Wydruk około 10,54 €–12,88 € nettoWstępna wycena jednego wariantu

Pobrania
57
Polubienia
14
Ocena
0
P
Printablesplo73

Fast connector for WS2812 led strips without soldering

Practical and fast, it allows you to connect several strips together or create simple joints in curves or decorations, the only limit will be your imagination. For their use You will need: Led strips WS2812 1 x fast connector 1 x clip…

Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu

Pobrania
56
Polubienia
14
Ocena
0
P
PrintablesChris Rimmele

Power Strip Bed Frame Mount

This print was an update of my original power strip mount, modified to fit a rectangular bed frame without the need for double sided tape. This was designed parametrically, so you should be able to change the features as needed if it…

Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu

Pobrania
48
Polubienia
16
Ocena
0
P
PrintablesMBLX

Wall / Door hook / hanger (Power Strips normal size)

Printed in PETG 0,35 (fast), 4 perimeters anf 50% infill.

Wydruk około 0,77 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
47
Polubienia
4
Ocena
0
P
PrintablesPavel Wojtaszek

Doraz na kleště/ Plier stop to Knipex wire stripping pliers 1262180

Doraz ke kleštím Knipex 1262180 , podobný originálu, trochu upravený pro lepší tisk. Materiál PLA ( mám lepší zkušenost než PET) tryska 0,4 vrstva 0,1 Menší trysku na vyzkoušení nemám. zkuste i s jiným nastavení a dejte mi vědět výsledek.…

Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu

Pobrania
47
Polubienia
13
Ocena
3
P
Printablesthinkier

Herringbone Gear Multi-Material Angled Stripes

Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Original Author: Emmett Lalish The following modifications were applied in order to…

Wydruk około 3,23 €–3,95 € nettoWstępna wycena jednego wariantu

Pobrania
46
Polubienia
2
Ocena
5
P
Printablesplex41

Pen holder for wall mounting with power strips.

Pen holder for wall mounting with power strips. Extra space to detach. For 4 pens. We use it to label our annual calendar.Size for original power strips. For loosening from below with needle-nosed pliers, for example.

Wydruk około 3,36 €–4,11 € nettoWstępna wycena jednego wariantu

Pobrania
42
Polubienia
5
Ocena
0
P
PrintablesMatthew Schultz

MJS.ART Art Tape Strip Cutting Jig

Another niche art item. While creating art I often need strips of tape that are exactly 1/16" or 1/8" or ¼" (etc.) wide. While I could pull out a cutting mat and a ruler to do it, I wanted a quicker, easier option. This simple jig has…

Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu

Pobrania
42
Polubienia
11
Ocena
0
P
PrintablesMike

Groove LED Strip mounting IP65

re-created the original groove LED Strip mounts because i needed more. It's printed in PTEG and for mounting I used TX20 3,5x20mm screws.

Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
41
Polubienia
5
Ocena
0

Stripes tealight candleholder

Can be printed with no support. Print at 195C to avoid stringing. Rotate the model so the base is vertical. Made for tealights with a diameter of 39.5mm

Wydruk około 4,30 €–5,26 € nettoWstępna wycena jednego wariantu

Pobrania
39
Polubienia
11
Ocena
0
P
PrintablesGraubart

Power strip / Extension lead holder for underdesk mount

54mm width 41 mm height To get enough strength use a perimeter of 4 Please leave a like to be mounted with screws or doublesided tape (which does not work always - depending on surface of the table and weight of the plugs)

Wydruk około 2,42 €–2,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
35
Polubienia
7
Ocena
0
P
PrintablesKevDoy

Shopping and Grocery Bag Hanger (Command Strip)

We needed a convenient way to store reusable shopping bags in the kitchen. I found a great model by Rixon Redd on Printables and modified it to be mounted with a 3M Command Indoor Picture Hanging Strips (Large) Pairs.

Wydruk około 2,10 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
33
Polubienia
6
Ocena
0
P
PrintablesAnthonySimek

Power Strip Holder (IKEA KOPPLA EU)

An adapter to loosly hold the power strip to the bottom a table. 3.80 mm ⌀ hole for a screw. WORK IN PROGRESS Just slide the holder onto the strip and bolt it to the table. Please use at least 2.

Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu

Pobrania
31
Polubienia
4
Ocena
0
P
Printablesaszajlai

Command Strip(s) Underware channel compatable

Make sure you push in the two triangles close to the short end of the command strip first and tilt down towards the long end to snap into place. Compatable with all the channel models that David D has created. If you have any issues…

Wydruk około 0,30 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
27
Polubienia
11
Ocena
0
P
Printablessythys

Fairy Dust Flexible LED Strip Frame

I created this as a decoration for my home and also for my hack space. All individual Parts should be held together just by clamping force, but using some glue is advised for stability. I don't want to advertise a specific Service or…

Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu

Pobrania
24
Polubienia
8
Ocena
0
P
Printableslebalz

Surrounding Strips Replacement for the Surface Laptop Studio

Printed on a XL, but could be divided into two parts and be printed separately. I sliced it with 0.15mm. I glued the strips on the laptop with strong double sided sticker tape (for phone screens).

Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu

Pobrania
21
Polubienia
2
Ocena
0
P
Printablestom

Kleines Regal zum Kleben mit Powerstrips/ Small shelf for sticking with Powerstrips

Ein Regal, das mit einem Powerstrip Large (2 kg Tragkraft) an die Rückwand eines Schrankes geklebt wird. Die Lasche des Strips steht über, sodass er sich einfach wieder entfernen lässt (siehe Foto). Die Abmessungen der Ablagen betragen…

Wydruk około 14,52 €–17,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
20
Polubienia
0
Ocena
0
P
Printablesumpadu

Capri honeycomb wire stripper

Remix of by depesz great design for wire strippers. Just increased the size to accommodate larger stripers like the Capri.

Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu

Pobrania
20
Polubienia
7
Ocena
0
P
Printablespaw3D

3 mm LED Stripe Clip

A clip that holds a 3 mm wiede LED stripe. The LED stripe can simply be pressed in and is held by friction. The clip can be fastened by up to 2.5 mm screws. Note: The gcode information in the header is for utilizing PrusaSlicer's "fast…

Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesColorful3DWorld

Keychain Strip & Lever Opener for WAGO 221 Series

WAGO 221 Keychain Multi-Tool: Strip Gauge & Lever Opener 💡 Project Summary A compact, pocket-sized 3D printed tool (keychain) designed to significantly accelerate and simplify wire preparation for WAGO Series 221 splicing connectors. This…

Wydruk około 0,21 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
18
Polubienia
12
Ocena
0
P
PrintablesCab23

CONNECT IT Power Strip Holder – 230V Extension Mount

Print Settings: Material: PET-G Layer height: 0.25mm Infill: 20-30% (recommended) Supports: Not required Assembly & Mounting: Parts joined with: M3x24mm screws Wall mounting: Countersunk screws 3.5x20mm Features: Custom-designed for…

Wydruk około 3,09 €–3,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
15
Polubienia
1
Ocena
5
P
PrintablesShake

6MM PET BOTTLE STRIP TRIMMER V1

🧵 6mm PET Trimmer V1 – Ultra-Minimal Precision Cutter Meet the 6mm PET Trimmer V1, your ultimate tool for turning irregular PET strips into clean, perfectly measured filament feedstock — with not a single gram of plastic wasted in the…

Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
15
Polubienia
2
Ocena
0
P
Printablespewchai

Switch box and a wire connection cover box for Ikea Lack LED strip project

Added version without cutouts in case you want to use another cable routing system. I used those 24V toggle switches (37 x 28 x 42mm/1.46" x 1.1" x 1.65") and this high CRI LED strip (they are getting pretty hot, so I have them in an…

Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
4
Ocena
0
P
PrintablesRevolt

Whirlpool kitchen hood handle strip mount

A friend's kitchen hood had a sagging handle strip, and it was because the plastic mount melted a bit from the heat, so I recreated it as a simplified version that fit perfectly.

Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesRPK

Handle strip for Prusa MK3 & MK3S Clip-in Tool Storage Box

The boxes are excellent, practical, only the lids are difficult to handle. I have therefore designed a handle strip to make them easier to remove. For easy retrofitting - simply glue it on...

Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu

Pobrania
12
Polubienia
0
Ocena
0
P
Printablesmscalora

Striped 2025 Shutter Shades for MMU/AMS

Double the bling! Only the top/surface four layers are colored to speed up the print and keep more strength. PrusaSlicer PROECT with modifiers, set to your desired colors: ASSEMBLY: Use a short length of filament to attach the arms to the…

Wydruk około 0,76 €–0,92 € nettoWstępna wycena jednego wariantu

Pobrania
10
Polubienia
0
Ocena
0
P
Printablesbrendan

LED strip light mount battery powered

Made this to add to Kumiko lamps i make. Printed with petg in two pieces then glued together.

Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesShake

10MM PET BOTTLE STRIP TRIMMER V1

🧵 10mm PET Trimmer V1 – Ultra-Minimal Precision Cutter Meet the 10mm PET Trimmer V1, your ultimate tool for turning irregular PET strips into clean, perfectly measured filament feedstock — with not a single gram of plastic wasted in the…

Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
9
Polubienia
3
Ocena
0
P
PrintablesRojikku

Knipex 16 30 135 Wire Stripper HSW Mount

HSW mount for a Knipex 16 30 135 wire stripper. Designed to work with the standard small hexagon insert. Supports are required, but organic, build plate only supports work great.

Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesFunFunBoy

LED Strip Holder for Voron 2.4

LED Strip Holder designed for VORON 2.4 LED Strip Holder (200mm).stl It's 210mm long and for a 20cm long LED strip. LED Strip Holder (250mm).stl It's 260mm long and for a 25cm long LED strip. LED Strip Holder (300mm).stl It's 310mm long…

Pobrania
6838
Polubienia
1083
Ocena
4,95
P
PrintablesPhil

Parameterized LED strip holder

Printing I printed these in white PETG at 0.2 mm for both the mount and diffuser and it works great. The diffuser is printed flat, and it's thin enough to bend into the curve that's shown. I tried transparent PETG for the diffuser, but…

Pobrania
6414
Polubienia
4389
Ocena
4,86
P
PrintablesDa_Rius

Wire Stripper Pro – Functional Maker Tool

This is my approach for a mostly 3D-printed Wire Stripper — a functional and robust tool designed to strip wires cleanly and consistently. I wanted to create something that anyone can use, whether you’re a maker, hobbyist, or handling…

Pobrania
6327
Polubienia
6269
Ocena
4,41
P
Printablesmirabatek

PET Strip Spooler And Spool Holder

You can use the PET Strip Spooler to easily store strips from PET bottles in compact form and nicely winded. Up to 7 spools will fit into the spool holder. The strip can be leaded from the holder to the machine for conversion to…

Pobrania
5234
Polubienia
764
Ocena
4,83
P
Printablesecodecat3d

Plastic bottle cutter into strips

This device can cut plastic bottles into strips of 7 and 11mm for 3D filament.

Pobrania
4578
Polubienia
445
Ocena
4,5
P
PrintablesJan Štech

Blade Scraper, Saw Handle, Wire Stripper

Blade Scraper Print the Blade Scraper without top and bottom infill for such a beautiful design (honeycomb infill). You need to print the white ring 2x and insert it from each side into the hole. Additionally, you will need a utility…

Pobrania
4045
Polubienia
1417
Ocena
4,95
P
Printablesfuchsr

Calibration Strip for simple Live Z/First Layer calibration

Update 9-11-2022: Added a version for 0.8mm nozzles. Tick marks of the old version didn't print correctly with a 0.8mm nozzle. Update 1-20-2022: Added a PDF file with a template, to write down the Live Z values used in the calibration.…

Pobrania
3855
Polubienia
369
Ocena
4,94
P
PrintablesAMTprojects

LED strip Soldering jigs

What it is Small soldering jigs for LED strips that allow to cut and fix the then stripped cables in place. With a dab of hotglue or some heat-shrink tubing it may even stay in place to secure the finished connection. How to print…

Pobrania
3807
Polubienia
2808
Ocena
4,92
P
Printablesspool2kool

led strip diffuser

diffuse you LEDs! Be sure to read the manual to see how. STLs for reference only. Use openSCAD to customize to your setup. need a box? Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Certain parts Resolution:…

Pobrania
3643
Polubienia
696
Ocena
4,91
P
PrintablesJBoe

Wire Stripper / Cable-peeler / Kabel-Abisolierer

Object description: This wire stripper is as the title says, a tool which cuts in the outer insulation of a cable that you can easily peel it off. I made the experience that a lot of professional tools work with a spring mechanism and cut…

Pobrania
2910
Polubienia
446
Ocena
4,84
P
PrintablesCmdrMoto

Gridfinity Nippers + Strippers + Pliers Racks

Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8 Find more Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Nipper Holder:…

Pobrania
2735
Polubienia
380
Ocena
4,97
P
PrintablesToby N.

Gridfinity Nippers Pliers Strippers Rack 2x2

Simple, space efficient storage solution for small pliers/nippers/cutters/strippers used in electronics. Two standard bins in the files, one fits up to 6 pliers with a grip thickness of up to 11.5mm (the right one in the photos) and…

Pobrania
2653
Polubienia
742
Ocena
5
P
PrintablesNerlin

Tool Holders for Filament Cutters/Pliers and Wire Strippers for the Multiboard Storage System

For the Multiboard Storage System. The cutters fit standard filament cutters (Creality) or pointy nose pliers. The wire strippers fit the ones in the picture. It may or may not fit a different brand.

Pobrania
2641
Polubienia
347
Ocena
5
P
Printablesdon frechdachs

Moon Lamp (LED Strip Mount WS2812B)

Hello there this a remix of the famous Moon Lamp for the use with WS2812B Led Strips and WLED (NodeMCU ESP 8266) to controll the LEDs. Moon Lamp Diameter approx.: 154 mm / 6 in Hole for the screwable LED Strip Mount approx.: 52mm / 2 in…

Pobrania
2640
Polubienia
498
Ocena
5
P
PrintablesWildRoseBuilds

Print In Place Hinged Cable Management Strip

Print In Place Hinged Cable Management Strip Check out the video here: I got tired of pulling my charge cables out of the various comb style management strips so i designed this locking one. Can be either screw mounted or double side…

Pobrania
2617
Polubienia
344
Ocena
5
P
PrintablesJayBird_25

Power Strip Desk Clamp

Update 1/6/2025: Added two additional 30mm wide clamps (and their respective bottom bolts) to fit thinner desks. The “Clamp 30mm Wide 30mm Thick.stl” clamp will fit desks less than 30mm thick and the “Clamp 30mm Wide 45mm Thick.stl” clamp…

Pobrania
2409
Polubienia
1587
Ocena
4,93
P
PrintablesSLIMPRINT

Striped Bulb Vase, (Vase Mode)

A Striped Bulb Vase, designed to be printed in vase mode. Size: 105 x 200 mm (100% scale) Print time: 3 -5 hours Weight: 40 grams Happy printing Non-commercial use only. Print instructions 0.25mm layer height 0.6mm layer width 45mm/sec…

Pobrania
2280
Polubienia
378
Ocena
4,96
P
PrintablesUlle

LED Strip profile 45 Degree

I have designed this profile for LED strips up to max 15mm wide. The beam angle is 45 degrees, making this profile perfect for indirect lighting. The fit is perfect and the diffuser snaps into place on the side without the need to use…

Pobrania
2269
Polubienia
766
Ocena
5
P
Printablesethanthompson

iPad Wall Mount for Command Strips

This wall mount was designed around three main criteria: Completely hide a large 3M strip Allow the user to use the camera and home button even with a case that accommodates the apple pencil Allow the print to be made without supports I…

Pobrania
1972
Polubienia
262
Ocena
4,86
P
PrintablesVegar

Powerstrip bracket

A small and minimalistic bracket for mounting one of my powerstrips. Same bracket will work for both sides. Update: 22.04.2023 - Added drawing with some dimentions. The powerstrip I'm using is a little bit ‘fat around the belly’ 🤭The…

Pobrania
1906
Polubienia
1031
Ocena
4,88
P
PrintablesMichal Fanta

Wire Stripper

Printing All parts are printable without supports. Assembly

Pobrania
1889
Polubienia
557
Ocena
4,81
P
Printablesraymanengland

RGB LED Light Strip Remote Control Holster / Holder

A Simple & Extremely Useful, Fast Printing RGB LED Light Strip Remote Control ‘Holster’ Update: Now includes a second model for the larger/ longer remotes that seem to be pretty common measuring 125 x 58 x 8mm It features ‘vents' at the…

Pobrania
1844
Polubienia
611
Ocena
4,93
P
PrintablesTimTwix

Velcro Stripe (Zip Tie) Cable Holder Screw or Glue

Holder to fix velcro stripe or zip tie by screw or glue. usable for: velcro stripe / zip tie / cable tie width: 10 / 20 mm support: not needed (printed on side -> see picture) material: not defined (PETG/PLA used by me)…

Pobrania
1825
Polubienia
234
Ocena
4,96
P
PrintablesSpool Designs

Bowling Pin - Dual Stripe - Single and Multi-Material

Scale Sized Bowling Pin Printing Instructions You can achieve the same print without a MM printer by using PrusaSlicer and adding filament changes on the Single model. See screenshot. Versions v2: Added unified stripe STL Reduced print…

Pobrania
1799
Polubienia
79
Ocena
5
P
PrintablesTymyn_3D

Watering can with stripes

UPDATED → 20.02. 2022 Removed bottom text due to customer comment UPDATED → 13.04. 2021 Changes: Updated STL, 3MF and G-codes Thicker bottom Reduced overhang at the handle at the bottom Thicker walls due to waterproofness. Added version…

Pobrania
1786
Polubienia
311
Ocena
4,83
P
PrintablesMartin Rejsek

LED Strip profile for honeycomb storage wall

EN: I have almost 4m long and 50cm tall honeycomb storage wall. My idea was to create nice LED strip profile for it. And here is it. It will take long time to finish it, but I would say it looks already perfect. Diffusor is standard one…

Pobrania
1765
Polubienia
835
Ocena
5
P

Square Lamp (LED strip)

Four parts: Squere Lampshade Cover or Cover without screws Base Screws M3 × 10 I used this led strip, but it is possible to use another one, for example with remote control :) – LED Strip Light 5050 USB Flexible Lamp Tape 3key RGB Ribbon…

Pobrania
1703
Polubienia
1048
Ocena
4,6
P
Printablesjodoll

Parameterized Power Strip Mount

This is a fully parameterized mount for power strips, but it will fit any other rectangular thing you want to mount on a flat surface (like my Dell PSU). I found some designs here, but none fitted the strips I had at home. The .3mf file…

Pobrania
1643
Polubienia
240
Ocena
5
P
Printablesscmanjarrez

Led strip holder

Led strip holder. It's designed for 10mm width strips, but you can modify it, I've attached the original file for easy remix. Edit: added no-holes version

Pobrania
1631
Polubienia
237
Ocena
4,9
P
PrintablesJoey

Bambu Lab AMS Purging Strips (P1P)

Inspired by MihaiDesigns, I wanted to create a quick color purge test that didn't involve generating a lot of programatic G-Code. My testing strips are designed to print the starting color then switch filaments and resume printing with…

Pobrania
1609
Polubienia
143
Ocena
5
P
PrintablesExtrutim

Missle Power Switch Cover For Power Strip

A simple cover for multiple socket outlets with standard switches. You need 2 M3x8 screws and some double-sided tape to attach. If you like check out my other designs too! Note: Since the question came up recently, the license states that…

Pobrania
1569
Polubienia
680
Ocena
4,98
P
PrintablesSelTom

LED strip mount for furniture

This is a 3D printed mount for LED strips, designed to be installed on the back of furniture like desks, cabinets, or dressers. It holds the LED strip securely along straight edges and corners. The mount is fixed with small nails, making…

Pobrania
1562
Polubienia
1444
Ocena
4
P
PrintablesLEO941

Big Power Strip Holder 6 Sockets

Holder for Big Power strip (6 Sockets).

Pobrania
1551
Polubienia
192
Ocena
4,74

Flashforge Adventurer 5M (AD5M) LED Light Bars mod accessories - mounts for 5050 LED (2 strips per mount bar) v1.0

These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…

Pobrania
1456
Polubienia
242
Ocena
5
P
PrintablesSLIMPRINT

Sphere Planter Striped - (Vase Mode)

A 3D printable Sphere Planter with a striped texture. Designed to be printed in vase mode. Print time: 3+ hours (100% scale) Dimensions: 14 x 10 cm (diameter x height) V2 high resolution model for vase mode and it includes a shelled…

Pobrania
1416
Polubienia
263
Ocena
4,92
P
PrintablesMyStoopidStuff

USB cable organizer (screw mount or use command strips) - Muliple Sizes

These are USB cable organizers designed to be wall mounted, either using #8 screws, 3M Command Strips or double sided tape. The 6 place cable holder has 4 places for thicker cables (5mm openings) and 2 for smaller ones (4mm openings). The…

Pobrania
1407
Polubienia
191
Ocena
4,95
P
PrintablesGalindof

Keyboard Wall Mount Hooks (Command Strip)

Keyboard Wall Mount Hooks designed to be used with 3M Large Command Strips. Each design has a small lip around the command strip above and to the outside. Works great. Print instructions Printed on Prusa Mini with 0.2mm layer height and…

Pobrania
1377
Polubienia
163
Ocena
5
P
PrintablesAL ExtremeError

Elegoo Centauri Carbon Canvas Relocation & Riser, LED Light Strip Ready

================================================== ELEGOO CENTAURI CARBON - TOP PLATE RISER & CANVAS DOCK SYSTEM ================================================== 📝 Overview & Core Details Description: A custom riser that lowers the…

Pobrania
1338
Polubienia
313
Ocena
4,77
P
PrintablesC3D Garage

K1/K1C/K1 SE Napkin Strip Saver for use with CFS Upgrade Kit – Nozzle Cleaner Mod

Note: Must already have the new CFS firmware installed for the printer to use the new placement of the “napkin strip” (ver 2.3.5.xx). This mod serves 2 purposes: Takes out any guesswork for the correct placement of the nozzle…

Pobrania
1307
Polubienia
217
Ocena
5
P
PrintablesRitzy3DPrinting

wire stripper

this a remix of wire stripper. the extrra blade holder is added to keep the blade in place. Category: Hand Tools

Pobrania
1277
Polubienia
212
Ocena
4,75
P
PrintablesRené

Power Strip Holder - Standing Desk Cable Management

This is a piece from my series on cable management for standing desks. Added a longer Version for Apple Power Adapters. To manage cords without screwing into the desk was my goal. For tabletops with a 25mm thickness, use this solution.…

Pobrania
1254
Polubienia
300
Ocena
4,43