Nespresso Capsule Holder
Nespresso Capsule Holder - remodeled
Wydruk około 7,67 €–9,38 € nettoWstępna wycena jednego wariantu
- Pobrania
- 726
- Polubienia
- 167
- Ocena
- 5
2056 modeli
Nespresso Capsule Holder - remodeled
Wydruk około 7,67 €–9,38 € nettoWstępna wycena jednego wariantu
Remix of https://www.thingiverse.com/thing:2864058 to fit on Prusa Mini and Prusa MK3s. Holds 24 capsule. No supports needed.
Wydruk około 7,58 €–9,27 € nettoWstępna wycena jednego wariantu
Since I had found nothing suitable for our 4-year-old daughter, I created a doll pump myself. This small pump and the "catheter" I modeled on the Medtronic 640G of my daughter. The scale of the stl is approx 1:1. I recommend to scale the…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
A handy thermos cozy thing for Ninja Creami containers. Dual wall design with a large air gap in between for proper insulation. Keeps ice cream tubs cooler and ice-creams unmelted significantly longer Prevents water condensation and drips…
Wydruk około 9,08 €–11,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…
Wydruk około 3,58 €–4,37 € nettoWstępna wycena jednego wariantu
Recycle your Nespresso capsules Changes I've used the cutter and cleaner from Steve_AU and the container idea for M600 , however, I redesigned the container/lid to be more practical. Note: the lid has a 0.3mm gap in order to have enough…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
An old design of one of our first models - hadn't been posted yet, so we hope you like it! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print)…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Needed a place to store my caffeine addiction fuel so I made this and thought to share it :3 Highly suggested to use supports, tested with 0.2mm layer height, because I wanted to make it asap, should work fine with finer layers.
Wydruk około 4,61 €–5,63 € nettoWstępna wycena jednego wariantu
Hood noise insulation clip for VOLVO CX70. The representative of the wonderful Swedish car industry is crumbling before our eyes. Several clips attaching the trim to the hood just fell apart in my hands. This time I'm saving the…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
One piece version of the excellent Nespresso Vertuo Capsule Pod Dispenser by sdgsean. Modeled to support 3 slide out drawers of the original design (included here but is the same as the original model). Printed front facing side down with…
Wydruk około 39,36 €–48,11 € nettoWstępna wycena jednego wariantu
Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.
Wydruk około 6,77 €–8,27 € nettoWstępna wycena jednego wariantu
A simple organizer for insulin to be stored in your refrigerator. Created in FreeCAD
Wydruk około 6,86 €–8,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing instructions: Magnet encapsulation in PrusaSlicer is accomplished by pausing the print before the layer that covers them : Slice the 3mf file according to your preferences. Scroll to the first layer that will cover the magnets.…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Square box for collectible coin capsule with 38 inner diameter and 40 outer diameter.
Wydruk około 2,00 €–2,44 € nettoWstępna wycena jednego wariantu
Triumph the Insult Comic Dog + Poop. May also make a nice Caganer for your nativity scene.
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This spacer lets you use a 12oz can in a 16oz YETI Colster Can Insulator, as well as other can insulators, as it just takes up the difference in height between two different can sizes. But is has an additional feature, which is to hold a…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two designs capsule holder for Dolce Gusto Nescafe coffe maker. Both are mobile, you can attach the base to the table with double-sided tape to allow the capsule holder to rotate on its own axis. The expandable design has 10cm height…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Hürrem Sultan, also known as Roxelana , was a captivating figure who rose from humble beginnings to become one of the most powerful and influential womentoman history. Her story is one of ambition, intelligence, and a relentless pursuit…
Wydruk około 7,49 €–9,16 € nettoWstępna wycena jednego wariantu
Description – English This 3D printed cable section tester lets you quickly identify the cross-sectional area of electrical wires in metric units (mm²) , including the outer insulation . Designed for electricians, makers, and DIYers who…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my design of a refillable capsule that works with the SmartClean system from Philips to automatically clean the shaver heads. As the JC301, JC302 capsules and the SmartClean system was replaced by a newer one, the original…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a model for a project which is more solid than the real coffee capsule. So this is what I've created :-)
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
Lets you check visually your stock. No more empty boxes in the fridge. Vials fit snugly in the recesses. Holds 25 vials.
Wydruk około 11,86 €–14,50 € nettoWstępna wycena jednego wariantu
Some days you don't want to carry everything in your kit, or you need just a pen and needle to toss in your backpack for a hike or class. This case allows you to safely carry your insulin pen with a capped needle and helps protect the pen…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of https://www.thingiverse.com/thing:2730719 The original was ok but for some reason it did not have holes to let water drain. Printing instructions No supports needed
Wydruk około 4,15 €–5,07 € nettoWstępna wycena jednego wariantu
This is a simple insulated bottle container. It's designed around standard 500ml water or coke bottles. It may keep water or beverages cool for longer time in heat days. There are slots for a shoulder strap. A 25-30 mm strip of fabric is…
Wydruk około 13,42 €–16,41 € nettoWstępna wycena jednego wariantu
Do you get stuck outside or inside thinking that your hands or the surface that you touched are dirty! Here is a portable solution!!! You can carry a small portion of Soap, Hand Sanitizer, and Lotion ALL IN ONE! Handy-dandy bracelet with…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
This is a replacement battery cart for Consulaire Mk.1 sabers from Elegant Weapons. While the sabers themselves are very durable and have become a staple in a lot of fencing clubs, the 3D printed battery cart tends to break over time from…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Konektor odpovídá svým rozměrům, barvě i provedením originálu. Skládá se ze dvou dílů, které jsou k sobě přišroubovány čtyřmi šroubky a matičkami. Silou přišroubování na straně vývodu kabelu z konektoru lze regulovat jak přítlak kabelu,…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Krabička odpovídá rozměry originálu. Spojení dílů je oproti originálu vhodně upraveno, neboť originál vyžadoval vymezovací kovové válečky, které se často ztrácejí. Většina krabiček obsahovala další otvory pro šroubky, pomocí kterých se…
Wydruk około 6,72 €–8,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Dual Egg Capsule (2 eggs) for Egg Loft Altitude events, specifically designed to be printed with LW-PLA. Modeled and created to fill a need for rocketry hobbyists as no commercial Dual Egg capsule kits are available. Foaming LW-PLA can…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
===== Only CZ ===== Licence: Stažením, použitím i tiskem tohoto modelu souhlasíte s licenčními podmínkami. Budu vděčný za drobný příspěvek na vývoj. Vás to nezruinuje a mi to pokryje část nákladů na materiál spotřebovaný na testovací…
Wydruk około 9,11 €–11,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printable kit for use with protective 6mm stainless steel tubes/sleeves. This kit includes everything you need to efficiently mix and pour encapsulating compounds, ensuring a clean and precise application for your temperature sensors like…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
SUpport de décapsuleur fait pour graver sur la xtool M1 des décapsuleurs en bois
Wydruk około 2,93 €–3,58 € nettoWstępna wycena jednego wariantu
Insulinpump simulator/dummy for medical training or paramedic simulations. Base is the model from Tadufeu. Changed the mount for the catheter-tube so it has a Luer Lock Thread, so you can mount a extension line (Heidelberger). The end…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Montura para capsula TSB-165A de 16mm del micrófono BM-800. Permite el cambio de plano del micrófono de vertical a horizontal, mediante el reemplazo de la montura original. Impreso con Biqu B1, boquilla de 0.4, PLA, capa de 0.2mm, 30% de…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
--- latest Update: Salt & Pepper Insert! --- Since the camping season is starting again I designed Inserts to use the Container for Salt & Pepper or sth. like that. Also I did minor improvements to all parts. --– Printed O-Rings (TPU) ---…
Life-size double-wall insulated LEGO cup! fits standard cans and keeps them cool! Uses a small wedge to keep the cans from falling out of the cup, and a small venthole in the bottom. Make sure to drop a follow and a like if you want to…
This small capsule can be used as an EDC accessory case, providing a convenient way to store and carry matches, pills, batteries, or other small items. Included in the design is a looped top, allowing you to conveniently attach to a…
Keep your small essentials organized, safe, and stylish. This 3D printed EDC (Everyday Carry) container is designed with a focus on tactile feel and rugged utility. The detailed knurled texture not only provides an excellent grip—even…
Update 16/3/2025: Each model is now labeled with its size! Insulation Cutting Tool – Perfect for Plumbing Projects This versatile insulation cutting tool is available in 11 sizes, ideal for different plumbing needs. The sizes range from…
introducing “TANK” the small but heavily rugged capsule/container for any kind of outdoor usage. waterproof against rain when using O-ring with dimension 3.5mm x 31.7mm (ID). I have included some STL- file of such ring for reference but…
If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…
A Keychain of the Capsule Corp. Logo from Dragon Ball/Dragon Ball Z/Dragon Ball Super Saga's. This model is specifically made for Glow in the Dark elements but can take any color or themo-platics you want. Just keep in mind that different…
With this jig you're able to cut insulation made from PE or PU in 45° angles. The model in the picture is made for 50mm insulations, although it looks a bit wide (the insulation seems to be smaller than indicated). But I also added…
Small Nespresso capsule holder. Two variants - for 24 pcs (only Part 1) or for 48 pcs (Part 1 and 2). You can remove the cover and fill the capsules into the holder body. Print instructions Printed with Prusament PLA, without supports.
A beautiful flower pot permeated with a organic double wall voronoi outside shell. This wonderful art decor is also ideal as a gift and as decoration everywhere an eye-catcher! I have printed it with 5 layers and the pot was waterproof. I…
This is a capsule holder I designed to be glued to a the side of a Nespresso coffe maker. It holds 3x5 capsules. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Notes: No supports required, print on flat side.…
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
My version of a nespresso capsule dispenser. If you need it , print it ! :-) Happy printing. Printing advise: None realy. I used PLA, 15% infill and no supports. For the loop use a brim.
A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…
Sizes that have been tested and confirmed to fit. Size 000 Size 00 Size 0 Size 1 Size 2 Size 3 Size 4 Sizes I have not yet tested I pulled the size specs off the web but you will have to test the actual fit and function yourself. Please…
This sleek EDC (Everyday Carry) capsule gives you stunning two-tone aesthetics using a brilliantly simple snap-fit design. Whether you're organizing your desk, building a survival kit, or just need a stylish keychain stash, these…
Antenna end insulator, for attaching end of wire antennas to support lines. Designed for print-ability, structural strength, minimal chafing of wires and lines. When printed at 70% scale (recommended size) or more, exceeds typical support…
We found a lot of cookie cutters for 3d-printing that looked very cool, but often didn't work so well in reality. This one here has now been thoroughly tested and optimized several times. After having eaten a thousand cookies, we have…
This modernly designed Nespresso capsule holder is simply too good to not want to have at home. It holds a maximum of 21 capsules, stands securely without taking up too much space, and is quick and easy to print (no supports required).…
A koozie for your seltzer. Keep it secret. Keep it cold. Now with more sizes. Soda/beer koozie now available. I have tested the 12oz koozie with selters and Red Bull. Both have fit perfectly for me. Version 3 has an air hole and some…
Nespresso changed their packaging on the virtuoline capsules without warning and made the old capsule holders worthless (the ones that hold the cardboard inserts) so I offer this version that works like the Classicline holders that you…
This is an improved version of Dolce Gusto capsule holder: https://www.thingiverse.com/thing:2847560 You will need: 1x base (0.20 layer height or above) 1x ring 6x capsule holder Depending on the total height you want: 220 mm height…
I wanted to design a stylish capsule holder for my Nespresso machine and came up with this idea. Started to sketch in Fusion 360. Later, i searched thingiverse, if something similar exists already and found this:…
ball soccer shaped capsule for multicolor printing recommended parameters: -wall 3 - 4 -supports 60° -infill 20%
This airtight capsule offers a reliable solution for safely storing essentials like pills, matches, and small tools, keeping your belongings secure in any environment. Compact, durable, and versatile, it’s the ideal companion for camping,…
dowel for styrofoam insulation. No pre drilling needed. prints without support in 0.2mm layer hight Installation: Screw wall plug into non-plastered insulation material without pre-drilling with an electric drill or screw driver and T30…
Nespresso Vertuo Capsule Drawers! Inspired heavily by the two models mentioned below, I married their concepts into one amazing Nespresso Capsule dispenser. The pictured product features 4 drawers, but you can print as many or as few as…
I created a simple box for holding 3ml and 10ml vials in a dense arrangement. Rather than using both with a hinge that could break, I opted to use 6x3 disc magnets, 4 per box, friction-fitted with the help of super glue. The design has 10…
For all the nespresso coffee capsules users Print Settings Supports: Yes Resolution: 0.2mm Infill: 15% Filament: Fillamentum Pla Extrafill Category: Kitchen & Dining
Disclaimer: this is provided as-is to tweak your own profile, use at your own risk. Rename the file to .curaprofile to import. You will need to adjust this depending on your filament. This profile is based on Elgoo Rapid PLA+ and a stock…
Humans began flying in space over 60 years ago. In April of 1961 Yuri Gagarin of The Soviet Union Air Force was the first followed by Alan Shepard of The United States Navy in May. Shepard flew in a Mercury capsule on top of a Redstone…
Very simple and functional dispenser allowing you to store 3 different types of coffee or cappuccino or not. The idea came up after seeing the absurd prices they ask for an item like this and also because of my stubbornness, I wanted to…
New original designed Rugged Capsule Filament used: Prusament PLA - Army Green & ESUN PLA Black In-fill: 15 % Support suggestions Support on build plate for the Capsule Support inside the thread and overhang of the hanger for the lid
Držák na kapsle Dolce Gusto
Great for festivals and concerts to carry earbuds, keep your tokens safe or simply use as a portable ashtray. Excellent conversation starter. Height: 10cm / Diameter: 3cm If you’d like to support my work, leaving a ♡ like ♥ or even buying…
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Each model was printed on my P1S with 5% infill, 2 walls, and .2mm layer height. I have printed each model multiple times using different types of filaments with varying results. Printing with matte filaments had the best results, making…
Kitchen set part 3 : Coffee capsule Dispenser (Pisa Tower) Make your your coffee tastes more Italia Compatible with all diam. 37mm capsules (Nespresso, Doce Gusto,...) 3 dispensers holes Fill the capsule tower from above Print as many…
This is my recently completed 800mm long model of the USS Sulaco from the movie Aliens. I broke the ship down into parts to get the best results from 3d printing for each part, and there are only 2 parts that need support (57 and 58). A…
One of my kids recently lost his tooth, but we were out of plastic bags so I made a tooth shaped container for him to put it in. He was very stressed about how the tooth fairy was going to pick up his tooth, and this ended up being the…
Goes into Tomy Gacha gashapon vending machine
Modular The cupholder is modular and you can stack the module vertically as high as you want. To have a nice finish there is a top that you can optionally add. Installation The system is not fixated by itself, and is meant to be fixed to…
Here in France, a refill cartridge contains 8 capsules. The new design is now provided in 3 variants and sizes. Sizes / Capacity : • M : 9 capsules • L : 13 capsules • XL : 17 capsules Objects are optimized for a line width of 0.5 mm.…
I wanted a dispenser for my insulin needles that could hold a lot of them. The 110mm tall one should hold an entire box of 100 comfortably but there are smaller versions included if you prefer. The inside has a small slope to help them…
Available in 355ml/12oz & 500ml/16.9oz. Requires 4x 4mm Screws (or you could just glue it…) . Screw holes are 25mm deep, accommodating many screw lengths. Very minimal supports required on Handle (pivot diameter) and Base (screw holes).…
A warrior-prince from the middle east. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE A bald…
Using test 1 and 2, check if your capsules fit properly. If needed, you can adjust the size using your slicer. 🌟💊 (edit The majority of users scale their prints to 103%.) With this handy 3D-printed device , you can effortlessly fill 50…
These are Storz and Bickel Dosing Capsule Magazine funnels and stuffers. With this tool you can fill up to 9 capsules of the magazine at ones. Update (New and updated parts are added): -Version 2 of the multi funnels for 8 and 9 capsules…
Summary Rebuild or create your own configuration of the Nakagin Capsule Tower today and celebrate its 50th birthday! This design is a 1:200 scale model representation of the famous Nakagin Capsule Tower (中銀カプセルタワー) found in Tokyo,…
---------- UPDATE AUGUST 2023 ---------- Added a printable O-Ring by @Das_Enzym_395842 Print it in a flexible filament like TPU. -------------------- Capsule for special cigarettes. Remix of "The Desperado | Waterproof Keyring Capsule"…
Remixed model of the Nespresso Capsule Holder from @mibla_44019 Removed the physical supports that were there in the original model since they were not useful and every 3d printers are capable to do the small bridges. I hope it'll be…
ATTENTION: this is only the base plate, which can be configured to change colors at the first layer or at different heights. By default, the flag, border, tag are at the same height as the base, for swapping colors at first layer (the…
I designed this picture frame in Fusion360 to be customizable, print support free, snap fit together easily and feature a storage spot inside for special items. It is intended to fit a 4"x6" or 100mm x 150mm photograph. I used a piece of…
I just printed this on my Bambu CX1 with 3 outlines and 25% infill. The plunger works perfectly when just right, might need to scale slightly to get right fit, .1mm scaling makes all the difference.
Remake of a 100 year old patented toy. It is intended for kids learning to learn multiplication of small numbers. I've also added some photos of historic instructions for entertainment. The original name was 'Consul' - The Educated Monkey…
Otimize sua experiência tres coracoes com este organizador de cápsulas personalizado impresso em 3D! facilmente acessível. Feito com precisão, este organizador não é apenas uma adição funcional para sua cozinha ou escritório, mas também…
You can mount this print under a cabinet with double sided tape or mount it vertically against your wall. When its mounted just slide your capsules onto the “railes” Print Settings Material: Pla Layer height: 0.30mm Supports: No Print…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
A Dolce Gusto coffee capsule holder. The parts are held together by a 8 mm threaded rod and two nuts. The length of the rod should be 50 mm + 55 mm per section. For example with five holder sections the rod should be 325 mm. Print…
A Pill Pill capsule, or pill shaped screwable container. To be completely waterproof, an O-ring must be added. Inner diameter should be Ø14-Ø18.5mm. Thickness 2-3.5mm. There is also a version for use without O-ring. The watertightness…
This model was inspired by this design , but slightly more compact and with more options for numbers of columns. I also added some horizontal supports to make sure sure that the holder doesn't bend since the clearances are pretty tight…