2044 modeli
Remix of the popular dust2 model by Frenzaih, updated to print better and (in my opinion) be slightly more accurate. Print without any supports, resolution 0.15 seemed to come out nicely. See my collection for other Counter-Strike maps,…
Wydruk około 8,87 €–10,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I installed as y belt tensioner the upgrade from Boogie. This design was for me the most stable one with a good opportunity to adjust the tension of y-axis belt. The only weak point now is the stock belt holder on y carriage. To have a…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
Update 2024: Download my new "SMG MK2" design here: https://cults3d.com/en/creations/fast-smg-mk2-vr-gunstock-quest2-quest1 UPDATE 2022: Finally compatible with Quest2. You just need to reprint the bottom body…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this clip as a replacement for the OEM removable clip for the Motorola Talkabout T200 / T400 Walkie-Talkies. Used at a local summer camp, these clips are broken all the time and it is hard to have sufficient supply on hand.…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Stock, the oculus quest does not fit me very well. If I pull the band low enough to keep it from slipping off, there is a huge gap at the bottom of the headset. This allows me to have a very good fit with no gaps and keeps the headset…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Starting with my Base Model , I used feedback to design the best possible clip for daily use. I have printed in PETG and PLA (Both gCode is included) with success. Parameterized Fusion360 files are attached for your own tinkering.
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It actually needs work for top performance.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 3,33 €–4,07 € nettoWstępna wycena jednego wariantu
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 5,65 €–6,91 € nettoWstępna wycena jednego wariantu
I created this model to easily hang my Quest 3 and its controllers on the wall or under a shelf. Print "WallMount and WallMountNose" or “UnderShelf” You can use an infill of 15%. It does not need supports. The model is designed to join…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
1976 EXOTO TIPO 312T2 Fourth, 1976 Grand Prix of Italy, driven by Niki Lauda Nobody expected 1975 World Champion Niki Lauda to return to the cockpit after his tragic accident at the Nurburgring on August 1, 1976. In the days after the…
Wydruk około 8,21 €–10,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
print with PLA Model might warp, because it's so flat and wide/long, so corners might bend and detach from bed - destroying the print, so make sure you have cleaned bed and have good bed levelling. Holder is sticked to the glass wall with…
Wydruk około 8,67 €–10,60 € nettoWstępna wycena jednego wariantu
Simple adaptor plate to use the rear of the BMW navigation cradle with the fitting bracket for a Garmin, TomTom or other standard four-screw mount
Wydruk około 1,38 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
found on thingiverse print settings: Prusa mini+ No Rafts No Supports Resolution: 0.2 Infill 15% Prusa PETG
Wydruk około 3,05 €–3,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed a low profile mic stand for the Audio Technica AT2020 microphone which can easily be placed somewhere else when not in use. This was specifically made for the Ikea Bekant desk, with a thickness of 17mm. The STEP file for the…
Wydruk około 3,57 €–4,37 € nettoWstępna wycena jednego wariantu
This is a variation of https://www.printables.com/model/1202146-wall-mountable-housing-for-dht-22-sensor for smaller sensors without own housing. See attached pictures for assembling. Please remember to insert the cable into the housing…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Náhradní nožky pro M1T290 / Replacement M1T 290 feet Tiskové parametry / Print paramers: Podpory / Supports: Pouze na podložce / Heatbed only Výplň / Infill: 30%
Wydruk około 1,59 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remote control case. Two versions, one with buttons. The other version only has holes. The case is designed to prevent accidental button presses in your pocket. perimeters: 4 layers: 0.2 I look forward to seeing photos of your prints. :-)
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
Modell wurde für eine Kühlbox bei einem VW T2 Bus entworfen
Wydruk około 7,57 €–9,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 24-10-24 See black PLA printed version. I extended the cylinder that extends into the case so that the knob doesn't slip out as easily. Secondly I made the bottom side concave so there is better grip with a finger when spooling the…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Replacement of the original Creative GigaWorks t20 or t40 volume control. More control and better grip
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
End cap for PowerXT 24" level (YT24A00). One cap was missing on mine & the exposed metal was a bit sharp. This printed PLA part press fits tighter than the original. Print with the exposed end facing up. Full supports underneath since…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
I recommend printing with full infill, support only for the outer ring, and a layer height of 0.1 mm for the thread.
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…
PROJECT HISTORY Edit 20.4.2023: HUGE UPDATE I completely remade my parametric model that helps me generate pulleys more easily. As a result: I reuploaded all files with cleaner .stl files. Now smaller pulleys available - some have very…
Please see original post on GitHub for thorough description, manual and instructions. Geometrically this is the same as the original and the gauge/meter will read just as the first one. Additional BOM: 4- M3x10x4mm bearings (623-2RS), no…
In scale 1:64 To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer 0,16mm layer height
This is a Porsche 911 GT2 (Type 993) slot car body. It is designed to be used on the "Scalextric Super Resistant Team GT Lightning" car chassis. Those cars are widely available for around $25. Approximate scale = 1:32. Much of the credit…
Summary This is a model of a Porsche 911 (996) GT2 in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the…
There are already working implementation of 'gt2 pulleys' available. Nonetheless that implementations are mostly based on SCAD which results in mesh files. If you prefer to model project parts directly in Fusion 360, this thing is for…
GT2 - 20T Tensioning toothed pulley with bearing for toothed belts GT2 - 6mm. For 5mm axle.GT2 pulley for NEMA 17 motor with a 5mm shaft. These pulleys include 2 M4x4 grub screws. Created by dzino GT2 - 20T Napínacia ozubená kladka s…
You wanna piece of me boy? :P Use body and arm files for print. If you need full model, use full file. And take a look my other models :P All the 3D models of NemoMK2・Cults (cults3d.com)
The GT2 Timing Belt Holder/Clip is a simple and efficient solution for most 3D printer projects. It is designed to securely hold GT2 timing belts, which are commonly used in 3D printers and other CNC machines. The model comes in two…
Closed loop timing belt GT2 60mm diameter. Suggestion to print from hard TPU (95A or 98A), no fill gaps, thicker wall if necessary. Tested on MyTechFun, torque is not too big, compared to regular belt. More details in the video. Important…
This small upgrade solves the problem of the torque effect on the linear block bearing and the quick shifting of the heatbed when homing the Y-axis. I didn't like the idea of the linear block bearing under the bed being used as a stop for…
Timing Pulley GT2 20 teeth Bore 8 mm Body dia. 16 mm Body length 16 mm Belt width 6 mm
. It is a Fusion 360 project which is capable of parametric generation of GT2 timing belt. Fill the Parameter table then print with TPU, great material to print this type of belt.
Summary This is a GT2 timing belt generator for Autodesk Fusion 360. Download this parametric Fusion 360 archive file to generate timing belts with arbitrary numbers of teeth, widths, and pitches. Parameters width - width of belt…
GT2 belt pulley parametric model for fusion 360. Use the .f3d-file to adjust parameters the bore size limits the minimum circumference / amount of teeth. If you do not have fusion, I hope a fitting size can be found categorized below as…
Designed for 6mm GT2 Timing Belt If the fit is too tight, try resizing the model or account for shrinkage in your slicer settings. Dimensions Standard: 10.06 x 4.18 x 7.40 MM Taller/Mirrored: 10.06 x 4.18 x 8.80 MM Update Added taller…
Simple jig for making your own closed loop gt2 belts. This is quite simple method - probably not the best but I have tested it many times and I have belts made with this method in use for few months now without issues. Still use it at…
60-tooth GT2 pulley with 5 mm bore. Support yes Print with 5 perimeters, infill 50%, filament PETG, layer 0.1 mm.
Da ich keinen Ladeständer für eine Huawei watch GT 2 gefunden habe welcher mir gefallen hat und auch ein "geschlossenes Metallarmband" unterstützt, die meisten sind für die normal enthaltenen Gummibänder und diese müssen geöffnet sein,…
Reusable clips without damaging the GT2/2GT (width: 6mm) timing belts. (Although these are designed for the KP3S, they could be used for other applications as well.) Updated [ September 1, 2022 ] ────────── A shorter clip has been added.…
Somehow I keep loosing these adapters, so here is a 3D printable set of anything I could think off. Obviously print them in a colour that doesn't allow light to come through, black is a good choice. PETG seems a good choice, it is a…
Phone mount for the Concept2 Model-D Rowing Machine. I was not happy with how the other mounts I found placed the devices above the rower display. Felt too high and unnatural to use during a work out. I created this one to mount just…
This remix allows the use of sensors I purchased off Amazon (HiLetgo) that had a different style of connector from the sensor the original case was designed for.
A reusable fastener without damaging the GT2/2GT (width: 6mm) timing belts.
Edited 10/5/24: QUEST 3 VERSION AVAILABLE Cool new Features! Made this grip Quest 3/Quest 3S compatible (Grip LED, Geometry Changes) Added a belt hanger assembly Added a knuckle strap battery door Added a knuckle strap Backwards…
Pulleys GT2 - 20T created for 3D printing. For GT2 6mm belt. Created by dzino
Description The T250 is a next-generation, high-performance 3D printer built from the ground up for speed, reliability, and print quality. With verified real-world acceleration of up to 250,000 mm/s² and sustained print speeds exceeding…
T-ring adaptors for 2" and 1.25", should work on any telescope. The adaptor if of the EF type, it should work on any Canon EOS cameras.
After days of researching and inspecting lots of GT2 profile drawings I finally could recreate an editable version of it. I included a screenshot of the Fusion 360 parameter panel so you can easily modify it to your needs. Printing This…
README: All stls are already in the correct print orientation. Motor: Any 29 series Samsung microwave blower- DE31-00029H, DE31-00029K, DE31-00029J, etc etc You can find these for decent prices on ebay. If you want to have the more common…
This is a remix of thing:5158444 that I modify to suit my need the original design is working ok, but I want to simplified the 3D model.. I'm omitting the screw-assembly and opt for glue-assembly only, adjusted the locking-tab and notch…
Originally published here: Motorola Moto G72 G82 & Edge (2022) xt2205 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay…
Planetary reduction gear for belted z-axis driven by NEMA 17 stepper motor. It has a reduction ratio of 5:1 and 25 GT2 teeth. This results in 10 mm/rotation. It may be mounted as a drop-in extension/replacement if your current drive has…
I got paranoid double, triple and quadruple checking belts everytime I had to cut a pair for a corexy gantry, so I created this to make it a quicker job. This tool operates similar to a clothes zipper using the meshing of the teeth on the…
Once hooked to belt - its not going anywhere :-) Due to small size - better to print with smaller nozzle, like 0.2. I had none so printed with 0.4 and later had to do small clean up but it still came out well. Hope it helps P.S. belt end…
Use at shown at the pictures. 1- Pass through gt2 belt in cover 2- Push fit belt to toothed profile 3-Slide cover to toothed profile With this way you will secure the cover so it won't get loose over time.
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Nema 17 Gearbox with 5mm shaft, fits GT2 Timing Belt Pulley. Remix of: http://www.thingiverse.com/thing:8460 Cover is in two versions with or without 4mm holes for M3 threaded inserts. Bill of materials: Nema 17 stepper motor M3 nuts 6pcs…
This is the model that accompanies the youtube tutorial at https://www.youtube.com/watch?v=_PyS34djcyw In the tutorial I show how to model simple timing belt to perfectly fit in your mechanical models. Leave no part out!
Inspired by tension meter inspired by Prusa but with a gauge on both sides, optimized for ABS. I use it to tune the belt tension on all my Voron printers. Since I mainly print ABS it's been optimied to give the best results when printed…
Inspired by https://www.reddit.com/r/voroncorexy/comments/ajyzxb/new_80t_gears_details_in_the_comment/ HINT : Voron moved away from printed Z gears. This is only a makeshift alternative…
Two part case for your cheap slim DHT22 board. You can find the matching DHT22 / AM2302 board all over the internet. Just make sure it looks the same - there are many different form factors floating around. Requires 4x M2.5x6mm screws 3x…
Advanced and Tilted version of tool to hold the chain of a Concept2 in position for maintenance, inspection and oiling without the need for a second person. Use it at your own risk. I printed my version with Prusament CF-PETG with a 0.6…
Tensioner, in Line or also swivel for connector or screw terminal end for 6mm GT2 Belt
Model: Airbus Eurocopter EC-135T2 helicopter !!!MODEL BUDE OPRAVEN DO 30.9.2024 MOMENTÁLNĚ NA TOM PRACUJI!! !!!THE MODEL WILL BE REPAIRED BY 9/30/2024 I AM WORKING ON IT CURRENTLY!!! English: Czech: Print Settings Printer brand: Elegoo…
I needed a GT2 belt clamp that could handle an outside loop, and couldn't find one, so I made this, which just slips over the side of the two belts placed back-to-back. I printed using PLA with 4 walls. Category: 3D Printer Accessories
This is remixed version of the belt tension gauge for up to 10mm GT2 belts (specially for the FLSUN v400). While using the normal model, I noticed that, once i reached the 3rd belt, the gauge was permanently bent and the result was not…
Layer High : 0.2mm or better Wall Thickness : 1.2mm
Edited on 12/13/23. V4 has small handles on the front to allow you to open the jaws to slip onto a belt more easily. Also, added a right handed version, and expanded the surface contact area of the arms rubber band hook, to reduce the…
This uses four m3x8 screws and a gt2 20teeth timing pulley with either 8mm or 5mm bore The front "lip" of the gt2 20t pulley will pop off easily with pliers make sure to keep pressing on the gt2 20t pulley while securing the screws. I…
After a couple of years rowing I've notice that using the phone on top of the PM5 rower monitor with the provided phone holder I've been developing the tendency to arch the neck while rowing (especially on the initial "catch" position).…
This is for your XT2. You can use it as a bumper or add the sun screen for extra utility. Print it black or crazy colors to customize your bike. If you print it please upload a picture and share your creation thanks! If you like this,…
I really do not know who designed this or rather scanned this, but i believe this must be on this site. I don't think Thingiverse has much time left. This is a 1 to 1 replica of the original, it just snaps in place really well. (Altough…
This is my second BT21 ornament, see the other one and lots more BTS and K-Pop themed objects by clicking on my designs link below Easy to print, no supports required, makes a great gift for a BTS fan (ARMY). @3DPrintBunny All my KPop…
I designed a series of honeycomb-style keychains featuring various car brand logos. Each keychain combines a lightweight and modern honeycomb pattern with the distinctive emblem of the chosen car brand. The design is both stylish and…
This custom-designed enclosure is tailored to house the Plantower PMS5003 Air Quality Sensor, along with an ESP32 NodeMCU and a DHT22 (or BME280 when using the alternative lid included in the files) temperature and humidity sensor…
The Fuji X-T10, X-T20 and X-T30 are great little cameras, but the grip is a bit small for larger hands: your pinkie has no-where to go except under the camera. This newly updated grip provides full support for all of your fingers, yet…
You want to use your smartphone on a Concept2 indoor rowing machine, and not ruin your posture while doing so? Now you can! As a rowing coach I did not like it when my rowers put their smartphone on the handlemount, because it makes them…
Box for a balun or unun of your desired configuration wound on a FT240 toroid. Features: M5 bind terminals with winged nuts used to quickly connect or disconnect antenna radials. The ring with 8 holes in the middle of the bottom part is…
It's a design that added a slide and removed the top part from the previous version. Due to the supporter of the existing logo, it takes a lot of time and the thin supporter is also unstable, so I deleted it. So this model is printed…
This is a combined moderator and muzzle brake for an Air Arms T200 .177 cal air rifle. This requires (1) 4-40 x ½ inch socket head cap screw. It reduces the muzzle blast noise but does not eliminate it. Muzzle blast is directed out the…
Modifications: 1. Add bracket cage 2. Increase the length of the pointer slide rail.
DHT22 sensor outdoor box. The box is designed to prevent water ingress, allow air flow, and mitigate overheating by the sun. It also has a chimney to avoid the problem of condensation. This piece is still under test. 4 m3 screws are…
This print allows you to use your iPad while rowing. It is designed to slip onto the PM5 monitor of a Concept2 rowing machine. Please note that you need to ensure that the thumb screw for the PM5 is tight enough to stop it falling…
Remixed from VZPHOTOs Fuji X100V Thumbgrip. For XT20, I needed it to be a little longer so here it is.
GT2 belt idler pulley mount for V-Slot aluminum extrusion profile. Print with no supports. Easy to mount and service. Ideal for belt driven v-slot carriage. Focused on providing the longest possible travel distance. Back side of the belt…
Print2Play: Chess Set Description: The ‘ Print2Play Chess Set’ offers a 3D-printable version of the classic game of chess. With a king standing at 61 mm and a pawn at 35 mm, this set captures the essence of traditional chess in a slightly…
Made a remix of nt2021s shelf with stronger hooks an only 2 supports at the bottom for cleaner design. Update: Corrected the slight angle of the shelf by decreasing the tolerances. Print Settings Printer: Prusa mini+ Rafts: No Supports:…
Here I start dumping the 100+ STL of screw thread adapters that I've made for the Telecentric project Waiting for the famed OpenScad “universal adapter” Maybe I'll put them all here. Start with some M42: Camera mount thread M42x 1 adapter…
Made a simple mount to add the Dayton Audio TT25 Pucks to the CSL Accelerator and Load Cell Brake pedals(probably works on other pedals as well). The mount uses the original bolts and has just enough thread to hold the mounts and pedals.…
![[OEPU] GT2 Pulley Collection - Parametric](https://media.printables.com/media/prints/1183441/images/8923239_2e844f7e-ebb3-438f-9729-671f7ed589fa_c03e629a-e583-43ef-b674-5ea20a2546c0/1d0b9815-5d41-4f0a-ada6-ca89e86abac0.png)
