136 modeli
This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…
Wydruk około 3,39 €–4,14 € nettoWstępna wycena jednego wariantu
This very fast print can be mounted over any selfie camera (mainly designed for Tesla interior cameras). If you use it for laptops, ensure that it does not damage your display (as the Slider is not flush with the housing. Be sure to print…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
I have made updated model with lid and viewing ports, check it out: New version I present to you fully parametric boxy things dispenser - originally meant for dishwasher tablets. You can use it of course for anything with boxy shape.…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
Set Contents This model includes 4 printable parts : Base – spacious interior that fits two toothbrushes and a tube/holder for toothpaste tablets Main Lid – closes the entire case and helps secure internal parts Toothpaste Lid – covers…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
3D printed Mech-arm. Used for hanging different Tablets and phones (vertical posed). Weight test up to 800g passed! Inspired by @FukyArt and his model https://www.printables.com/model/647794-flexible-sturdy-phone-arm-100-printed It is a…
Extender v8.0 for GameSir G8+ optimized for versatility and ease-of-use. Version 8.0 has been streamlined to just two components , ensuring a faster print and easier setup. It’s engineered to fit tablets up to 11″ , including popular…
This is a simple folding stand/riser for books, laptops, tablets, and keyboards...etc. Great for travel or just on the go. Measures ~243mm in length X ~64mm tall. It tilts the item in use at 16.3° angle. This is is a print-in-place model…
data tablets from subnautica
Here is a set of four arms you can adjust in various positions depending on monitor size and port placement. For the most stability try attaching the bottom arms first using both VESA mounting holes. Then adjust the top arms once the…
Remixed my old project to be more tough, three walls thickness, might be more suitable for printing with different nozzle sizes
The holder should fit most 8-inch tablets. The sunshade is designed for the Apple iPad Mini.
a specific request i filled. a tiny 7 small tablet single day sliding door dispenser thing fits best .25" diameter tablets size of cylinder hole for each tablet = 0.375" dia x 0.207" tall i printed with a .4 nozzle, and at .15 Layer…
Two part assembly: base and front plate, which slides in base for assembly and is easily removable. Optional M3/M4 screws for fixing to wall.
The tablet is made up of two parts - body and symbol. They are two different files for the purpose of printing them in different colors. There is also a version without the letters for printers that have a problem with smaller details.…
✨ First, I would like to thank for Peter Martin This is a 3D-printable, adjustable, and stylish stand designed for iPads or other tablets.🖥 This stand allows you to use your tablet in the most comfortable and ergonomic position. Perfect…
Universal Camera Privacy Cover for laptops and tablets. Different sizes. Fits screens from 6mm to 10mm thickness. Just slide on top. No glue required. Print with brim for better adhesion.
The dispenser can hold 50 pieces.
Remixed a grat idea and appearance from knoopx's Kitchen Door Pocket This one is narrower and deeper, so it can fit one bag of dishwasher tablets. Can be printed without any supports, uses two M3 screws. Print instructions Prints without…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I made these wall mounts to hold…
universal holder for tablets, mobile phones, etc. (version OUTDOOR) Print instructions Category: 3D Printing Summary universal holder for tablets, mobile phones, etc. (version OUTDOOR)
my tablet is a huion kamvas 22 plus, I've been looking for a solution to quickly tug my keyboard away while still having some access to it as hotkey for a long time and eventually decided to design my own. I tries several design that…
This is a very simple stand meant for tablets, It will position your tablet at approx 70deg. There are four sizes depending on the thickness of your tablet from 5mm like the new iPad Pro up to 11mm for thicker sized tablets.
Always wanted to use my joycons to play games on my tab while i was gamestreaming. Grips make it easier and more comfortable to hold. I print them standing up because that provides best quality for the slide in and less supports.
Hand press is made for 2,5 cm wide tablets. I've achieved best results while using 8-10 g of hexamethylentetramine. Print settings and material is on you but I recommend using PLA. I've printed with 30% infill.
As I don't like to carry my keys, my cards and a storage for my medication separate I designed this wallet. The wallet is fully printable, all you need to assemble are three book screws and a piece of elastic band. Inside the wallet is…
Tablet holder useful for watching movies, teleconferencing or to help turn a phone into a baby monitor. It holds the tablet or phone securely, is well suited for uneven surfaces and can be setup even with the device camera pointing down.…
This universal tablet stand is designed to securely hold small tablets like the Samsung Galaxy Tab Active 5 (213.8 x 126.8 x 10.1 mm), iPad Mini (all generations) and other similarly sized devices. The slot accommodates tablets with or…
Origin: This model came to be from a very specific demand: My girlfriend has an iPad with a wireless keyboard that attaches via magnets to the cover. When she used the cover as a stand (behind the iPad), the keyboard would slide when…
Después de ver e imprimir muchos soportes de móviles, me decidí a diseñar uno fácil de imprimir, robusto, con regulación de inclinación, universal que sirviera para todos los móviles. Mi sorpresa fue cuando me di cuenta de que podia ser…
A selfmade holder for effervescent tablets. Holds 6 pieces. Ein selbstgemachter Halter für Brausetabletten. Hält 6 Röhren. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 160 Infill: 10 Filament:…
Printing plastic replacement parts is the what makes 3D printers really useful. Even though these nibs for the graphic tablet pens are probably not easy to print due to their small size I wanted to try it. So I measured the diameter of an…
modelo de soporte para tablets para usos en un automóvil
this very simple phonestand can be printed without supports when layed on its side in the slicer. It does what it is supposed to do and doesnt look half bad doing it I hope it helps you and serves you well
A simple effervescent tablets holder for 10 tubes. The rubberfeet have 6x2mm (https://amzn.eu/d/2eUqjHv)
I created this thing for charging 4 devices at a time. The dividers have different hights and can be installed individual - higher ones better for tablets, lower ones better for phones. The cables can be stored inside the box. You need 4…
Solid, adjustable and taking a minimal amount of space, this stand can follow everywhere you go. Supports smartphone and tablet. Print it flat as it is without support . 0.2 layer or below recommended
iPad stand for 3 iPads an one for 2 iPads, to store them while not in use. It bothered me, that i always had my iPads laying around somewhere, so i designed those stands to store my Tablets.
Measures: 20x10x10cm No supports needed.
A remix of hellgy's window blocker
This single STL file creates a symmetric bracket – print two for left/right sides to mount any tablet up to 7.5mm thick, like the Redmi Pad 2 (254.6 x 166 x 7.36mm). Designed for Home Assistant wall kiosks: secure hold, easy snap-on/off,…
Simple and stable docking station. Compatible with Steamdeck, Nintendo Switch and all sorts of tablets. 3D PRINTING SETTINGS Printed sideways, 0.3 layer 10% infill, 2 perimeters. No spupports needed.
The PARA BOX Tablets is a robust medication box with seven compartments that are labeled from Monday to Sunday. It is designed so that the tablets cannot mix in it. There is a Fusion360 file in which you can write your own name. in German…
Box for dishwasher tablets (with screws)
Remix of the desk hanger, stem is trimmed to 26mm. Printed in with Creality k1se with Creality Hyper PLA black and 0.2mm layer height.
These will hold your tablet on the wall. :)
Charge station base and stand designed to hold a multi-USB charger within it. The top will bolt onto the bottom with 4 standard M3 x 12 or so socket head cap screws. You'll probably need to work a bit to carefully thread them out as the…
Printed with normal PLA Layer: 0,18mm Wall-Lines: 3 Infill: 10% Temp Nozzle: 205 Temp Bed: 65 Speed: 60 No Support Filament: iFilament PLA - 1.75 mm - iFusion Cherry Red
There are a MESS of tablet stand designs out there, but none seem to fit tablets with the cases on them, only seem to be designed for bare tablets. I like my highly protective case, so I designed this simple stand to hold my tablet so I…
Print two leg parts and one cross part, then either friction-fit them together or adhere them with glue. Larger tablets might have their center of mass a bit too far back, which will cause the stand to fall over. The parts are very simple…
Print took about 1h 20 minutes, 0.2mm layer and 5% infill. It prints great, no need for a brim and it can even hold a tablet. Printed it on the side, no support is necessary. I hope you enjoy the model Print Settings Printer Brand: Prusa…
I made this primarily for my personal phone the iPhone 13 pro max. It fits perfectly and the weight distribution is perfect. I have also tried this stand with an iPad mini and a normal big iPad and both fit perfectly in landscape and…
I was tired of the tablet lying around on my desk. Therefore I created a quick tablet holder for several different tablett sizes. The uploaded model offers spaces for: 2 x Fire HD 8 tablets 1 x Ipad Pro 2019 including cover 1 x Remarkable…
I like to use my rowing time to catch up to some series, watching Prime or Netflix with a Galaxy Tab and a pair of wireless buds. This remix accommodate a larger device than a phone.
A replica I made of a 6700 year old clay tablet from the village of Tărtăria in Romania. There is a lot of debate about what the symbols mean, but they are likely either the earliest known writing (Vinča symbols) or it's a star chart (or…
Garmin quarter turn mount for tablet. I glued it to my old iPad mini folio to use with Zwift. Print with the flat surface down and the Garmin mount up, supports are needed for the quarter turn flanges.
The Atreides, Harkonnen and Spice tablets in the retail version are too thin and wear out quickly. For those who want this protection for them, you will also need to buy 8x1 magnets (15 pcs) and 3x1.5 (6 pcs). I do not think this is an…
A very simple vase mode box with slide on lid, sized to fit a packet of Dextro energy tablets. I printed the box and lid together with the following settings: Walls, Perimeters = 1 Bottom layers = 2 Top Layer = 0 Infill = 0 It gives a…
To raise the stand simply pull the gantry up, to lower it you pinch the knobs at the back that are green and yellow in the picture. I color coded all parts so you easily can see how to put it together. There are two foots, one with a 7.5…
Designed to hold up to 25 tablets for a washing machine. Size of each tablet up to 30x40, height 20 mm. Inside slide and side cutouts makes it easy to pull one out while the rest slides down without jamming. Pieces: Bottom half + upper…
Optimize your space and enjoy a hands-free experience with these 3D-printed clips designed to hold tablets and phones on shelves or boards measuring half an inch. Printable in PLA with a 10% infill, these two pieces ensure a secure and…
small stand for Wacom intuos M/S and the Wacom intuos pen Not tested for other tablets, Wacom and more, or the Intuos L
This stand was designed with a focus on maximum stability, especially when the tablet is in portrait orientation. It remains perfectly steady and secure during screen taps, without tipping or wobbling — and of course, it works just as…
This Tablet Mount will hold a full sized ipad pro in landscape configuration, its fully adjustable. If this is goint to be used in a car DO NOT USE PLA. Use ASA, ABS or PETG or better. You will also need some type of TPU for the pads. ive…
I just wanted to store my Hydralyte pills on a lab-style tube rack...
Information: I actually designed this stand because I needed something for my handheld PC, but I realised it was actually useful for most devices. After printing it, I realised that this would actually be useful for a lot of people. This…
needed something to hold my ipad mini up when it's charging on my table, so that i can reclaim some real estate. Made it such that i can hold 2 tablets, just in case. Seems to work ok if you lean the tablet inwards. I guess you can also…
Designed to hold up to 25 tablets for a washing machine. Size of each tablet up to 30x40, height 20 mm. Inside slide and side cutouts makes it easy to pull one out while the rest slides down without jamming. Pieces: Bottom half + upper…
Effervescent tablets holder. PETG, 0.4 nozzle, 0.2 layer, 2 perimeter, 60% infill. For a stronger connection, I recommend sealing with second glue. Attach the base first, then glue the holders.
About The design is made for attachment to the inside of a kitchen door. Attachment Attach the dispenser, e.g. to i.e. the inside of a kitchen door, with double sided tape or something similar (e.g. Tesa powerstrips are easily removed…
holder for storing tubes for effervescent tablets. Can be connected in calusters
Customized version of https://www.thingiverse.com/thing:2868839 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2868839 Instructions Using the following options: type_of_tablet = iPad mini 4 orientation =…
Here is a easy Tabletholder i designed in Fusion360 for my Samsung Tab3 wich i often use for studying and was tired of holding it all the time. It took me about two hours to print. Have fun! Print Settings Printer: Tevo Little Monster…
Lengthened the model by 20mm to accomodate an IKEA Lack side table
Holder for the Effervescent supplements / tablets
I made it for my dishwasher tablets, but of course it can hold whatever you want.
Tablet-Ständer für Nokia T20 oder ähnliche Tablet's, die nicht dicker als 8,2mm sind. Im Fuss ist eine Freistellung für einen Winkel-USB Stecker. Mit der Stütze kann man die Neigung für die entsprechenden Bedürfnisse anpassen. Source…
Tired of buying expensive chlorine floaters, and little tablets. So I made this to hold 3" tablets. They last about a month in my small 3 person spa. Used PETG @ .20mm. The small 1mm hole I determined was just enough to keep the chlorine…
un simple separador para las tablets de un colegio
I often need a screen of some sort in to be free standing on my desk, e.g. when connecting a laptop to a larger monitor and wanting the two screens side by side. Conventional stands can be used to raise but for the above application they…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** I recently got a Star G640 digital art tablet by XP…
Tired of dull, boring detergent holders? Say hello to your kitchen’s new sunshine superhero —the Dispenser of Joy ! With his infectious grin, twinkling eyes, and a dapper hat that flips open for refills , this little guy doesn’t just hold…
A sculpture of Moses after receiving the tablets with the Ten Commandments from God.
dishwashing capsule holder with magnetic top you need for it 4 magnets (7X2 mm)
Holds my kids kindle fire HD's in their bulky cases, the charger I had, plus space for cell phones. I use a rocker switch at the outlet for the power block.
Should be able to handle bigger and heavier monitors too. Instead of printing the rod yourself, you can also use a 15mm wooden rod. However, you won't be able to fit it into the foot's clip since the printed version has a flattened side.…
This may be niche but I designed a tab to work with Arkon tablet mounts. This is specifically designed for the Steam Deck but can be used for smaller tablets. The tab is 17 mm wide so it can fit between the Steam Deck's vent and USB-C…
Size of each tablet up to 30x40, height 20 mm. Inside slide and side cutouts makes it easy to pull one out while the rest slides down without jamming. Designed to fit Prusa MK4 print space. Position: Printed both parts on the side for the…
Thanks to @flegne for the original Design.
Stand for thick tablets (eg. car diagnostic tools, otofix, launch)
Tablethalter für oben genanntes Model. Tablet muß auf dem Kopf reingestellt werden um geladen zu werden da Ladebuchse oben. Ist eher zur festen Montage gedacht. Habe es so auf meinem 3D Druckergehäuse mit Spiegelklebeband montiert und…
70° Winkel, für min. 12" Tablet geeignet, stapelbar. PETG; 20% infill; 0,3mm; <50g -------------------------- 70° angle, suitable for min. 12” tablet, stackable. PETG; 20% infill; 0.3mm; <50g
To prevent liquid splashes on my dishwasher tablets, I designed this simple lid for my box (https://www.printables.com/model/502258-undersink-box) which has a hole. Easy to print. 3 layers wall 25% infill 0.2 layer height
EN: This is a custom bracket/tray with a handle designed to hold your effervescent tablet tubes for vitamins, magnesium, electrolytes, etc... I got annoyed that all the effervescent tablet tubes always fall over when you try to find or…
dishwashing capsule holder with magnetic top you need for it 4 magnets (7X2 mm) 25,5 cm high
Pool chlorine float. Designed for 3" diameter, 8 oz tablets. Diameter: 5 3/8" Features - tablet basket storage in the bottom eliminates top opening, dramatically reducing float size. - tablet is stored out of sight. - basket has a twist…
About: Gridfinity 1x1 support base for box of water-soluble tablets (such as Effervescent). Additionally those boxes are ideal as ESP32 cases with extra modules. When placed upside-down they tend to wobble, so I created a support base…
Bei meinem Sohn war der integrierte Ständer in der Hülle vom Tablet gebrochen und ich habe diesen als Ersatz erstellt. Passt einwandfrei und erfüllt die Funktion.
The original arms were a little too small and tight for my iPad 12.9 with case, so I made them larger.
I use an Android tablet for offroad navigation and marking points of interest. I recently upgrade to a 10" tablet, this required a new mount to hold it. I am a big fan of RAM Mounts and have used there X-grip line offroad for years. So I…
![Kitchen wall TABLETS DISPENSER [special hook]](https://media.printables.com/media/prints/547655/images/4402125_a4f45420-e123-4691-9c56-d5abfae48f30/img_20230803_145648.jpg)
![Kitchen wall TABLETS DISPENSER - LARGE [regular screw]](https://media.printables.com/media/prints/625014/images/4956477_77e41b37-0230-4192-be42-4adb84191477_b820eb61-a42c-4433-a271-b41ae1960edf/tabl3.jpg)
![Kitchen wall TABLETS DISPENSER - SMALL [regular screw]](https://media.printables.com/media/prints/625017/images/4956511_490a1739-c107-4493-955c-6b7c19ea0bdd_695d1e7d-fe1c-4656-a839-d181707cc9d0/tabl3.jpg)
