Wyniki wyszukiwania: tape

Sortowanie

3639 modeli

P
PrintablesMiguel M.

Tape Dispenser, Multi-size/Modular

This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…

Pobrania
8814
Polubienia
4733
Ocena
4,89
P
PrintablesTinkrMakr

Sewing Cloth Tape Measure Winder Case 14mm and 18mm Snap Fit

Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…

Pobrania
2341
Polubienia
656
Ocena
4,7
P
Printablessquinn

Duck Tape Dispenser

A duck shaped tape dispenser, intended for use with standard scotch tape rolls or an equivalent. The main shaft uses a threaded cap to keep the tape from falling off, and provides an easy way to change the tape when needed. Two different…

Pobrania
1496
Polubienia
545
Ocena
4,79
P
PrintablesMocodroid

Sewing tape reel

Manual reel for sewing tape. Print instructions Sewing tape reel. Printed on translucent green and black PTEG. The sewing tape in the pictures is 120 inches long. No support material needed. The black line on the middle of the reel was…

Pobrania
1174
Polubienia
349
Ocena
4,73

T-Rex Tape Dispenser

Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page. For more of my designs check out my website: https://3domcontact.wixsite.com/3dom Update 2nd July 2023:…

Pobrania
888
Polubienia
138
Ocena
5
P
PrintablesYann Büchau

HSW Wall Mount Tesa Powerstrips/double-sided tape

Better version shipped with HSW Screwiverse: https://www.printables.com/model/488798-hsw-screwiverse-flat-wall-tapeglue-brackets Attach this bracket to a wall using TESA Powerstrips or a similar product. Hotglue might work as well,…

Pobrania
857
Polubienia
180
Ocena
5
P
Printablesburtworks

Quilt / Tapestry Wall Hanger

This is a wall-mounted quilt hanger, based on a wooden design I've seen. It's simple, requires no supports, does no damage to the hanged item and looks great! All pegs can be used with all versions. V1 Simpler, and does not include hole…

Pobrania
833
Polubienia
160
Ocena
4,73
P
PrintablesJulieL

Tapestry Needle

I couldn't find my tapestry needle to finish my fair isle knitted project, so I made my own. I print it in 0.20 speed, 20% infill and no supports and it comes out great. Sand the tip to make it sharp. A bit of sanding overall is…

Pobrania
740
Polubienia
37
Ocena
5
P
PrintablesAaronOaks

Gridfinity Dymo 160 Tape Holder

Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:

Pobrania
460
Polubienia
68
Ocena
4,94
P
PrintablesRepoholy

Prusament Spool Tape Dispenser

Simple Tape Dispenser inspired by Prusament Spool design Very simple dispenser for basic tape. Iťs designed for tape with total radius of about 5 cm, inner radius of about 2.5 cm and width 2 cm. But as you can see, there is some space…

Pobrania
344
Polubienia
128
Ocena
4,8
P
PrintablesApex23

Ikea Skadis holder for Tamiya Masking Tape dispensers

Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.

Pobrania
276
Polubienia
34
Ocena
5
P
Printablesxyz

Hooks for Pleat Curtain Tape

Introducing our 3D printed hanging hooks for curtains and blinds with pleat curtain tape. Designed as an alternative to IKEA RIKTIG. Available in three different variants. Two variants allow for parallel or perpendicular hanging of…

Pobrania
259
Polubienia
18
Ocena
5
P
PrintablesOtty_Skipper

Klebefant Tape Dispenser

Der Klebefant hält immer etwas Klebefilm bereit und macht dabei auf dem Schreibtisch eine super Figur. Überall anders natürlich auch. Der Klebefilm ist so in dem Abroller befestigt, dass er nicht rausfallen kann, jedoch kinderleicht…

Pobrania
251
Polubienia
125
Ocena
4,3

Ergonomic tape dispenser

Artistic and ergonomic tape dispenser designed for office use. Compatible with usual office tapes. New GGvision studio creation.

Pobrania
230
Polubienia
46
Ocena
4,17

Washi tape tool | Cut washi tape into fun shapes and patterns! | straight edge, zig zag edge, arrows, chevrons

SEE IT IN ACTION! FEATURES This washi tape tool features a straight edge, zig zag edge, and arrows/chevrons to tear your washi tape into nice shapes! See the photo for examples of combinations you can mix and match to create fun washi…

Pobrania
201
Polubienia
51
Ocena
5
P
PrintablesBodo

Compliant Mechanism Clip Wallmount for Tape

Changelog compliant mechanism clip mount for screws 2022-12-07 v1.1 improvement to the guide design, now allows for higher material shrinkage tolerance 2022-12-04 v1.0 initial public release Universal wall mount for compliant mechanism…

Pobrania
187
Polubienia
58
Ocena
0
P
PrintablesAndersounds

1/4" Audio Tape Splicer

Printed with PLA at 0.20 no problems. Print it right side up, as printing on face results in a bad finish in the tape groove.

Pobrania
160
Polubienia
9
Ocena
0

Washi tape holder / travel stationery organizer | 25mm diameter

Keep your washi tape organized at your desk and on the go! FEATURES designed for washi tape rolls with 25mm diameter fits 4 rolls of 16mm width washi tape screw-on lid for compartment to keep small accessories -- great for additional…

Pobrania
159
Polubienia
40
Ocena
5
P
PrintablesPark_3D

Back holder for mask 30 mm elastic tape

Simple and stylized model to hold a mask. Printing instructions Printed in PLA, you can print it in PETG OR ABS too I recommend printing at 0.2mm and the infill will depend on how strongly the item will be held or treated, but 20% infill…

Pobrania
148
Polubienia
58
Ocena
0
P
PrintablesNeva

HSW 5M measure tape holder

HSW 5M measure tape holder

Pobrania
139
Polubienia
19
Ocena
5
P
PrintableseMHa421

Verbindungswinkel zum Stapeln von IKEA Trofast Regalen

Einfache Winkel um mehrere IKEA Trofast Regale übereinander zu stellen und zu verbinden. Es können die originalen Schrauben verwendet werden. Kein Bohren nötig. Druckdatei enthält einen rechten und linken Winkel. Pro Etage werden je 2…

Pobrania
126
Polubienia
10
Ocena
5
P
PrintablesRepoholy

Tape dispenser beer crate

Simple tape dispensers in the form of the legendary beer crate model Tape dispenser for two tape spools side by side. You can easily store and use 2 types of tapes for example. Model containes 4 parts: Crate beer Lid with cutter part…

Pobrania
126
Polubienia
48
Ocena
3
P
PrintablesEli G

Stapelbarer Eierbecher

Praktischer und einfach zu druckender Eierbecher im stapelbaren Design. Sollte mit einem recht Temperaturbeständigen Material gedrunkt werden. Ich empfehle PETG oder ABS. Ich empfehle ca. 20% Infill und eine 0.2 Schichthöhe. Supports sind…

Pobrania
121
Polubienia
13
Ocena
5
P
PrintablesDavid Harvill

TZ Tape Caddy for Multiple Sizes

This a cartridge caddy for Brother P-Touch TZ and TZE tapes. It has been modified to have cartridge slots of two different sizes. The OpenSCAD file allows you to customize the number of slots and their respective sizes. This all sits on a…

Pobrania
116
Polubienia
12
Ocena
5
P
PrintablesAudi

32mm and 78mm Tape Dispenser Spindles

Okay you Sublimation Printer makers, you asked for it, you got it. :D A standard office tape dispenser is too light to use one handed. So here are a couple of spindles to use with large, heavy dispensers like this one...…

Pobrania
115
Polubienia
20
Ocena
0
P
Printablesmpatl

Weighted Cassette Tape Dispenser

This isn't a very complex remix. All thanks to the original model including the .step file. I've added screw holes for real screws and included hollow areas that can be filled with buckshot, fishing weights or sand (if using sand wad some…

Pobrania
111
Polubienia
37
Ocena
5
P
PrintablesAudi

32mm Tape Dispenser Spindle

This one is for you Sublimation Printer makers that use heat tape. The spindle for a standard tape dispenser is too small and doesn't hold the tape. This spindle is 32mm in diameter. Edit: Also see my 32 mm and 78 mm spindles with 6 mm…

Pobrania
111
Polubienia
31
Ocena
0
P
Printablesgjpc

Fletching Tape Dispenser

Fetching tape is my favorite method of attaching my feathers to my arrow shafts. It is a bit tricky to handle the double sided tape, the feather and the shaft. There is a commercial dispenser available, but I like my version better. The…

Pobrania
108
Polubienia
14
Ocena
0
P
PrintablesEdgar.A

Minimalist tape dispenser

Here is an design and minimalistic tape discouter for all the tape under 12mm.

Pobrania
104
Polubienia
18
Ocena
0
P
PrintablesMariam Matta

XL 90mm/3.5 inch Bias tape maker (for sewing, making double fold straps)

Too much of sewing is pinning and measuring and I get bored easily! I got tired of making double fold straps so I made a giant bias tape maker instead. This is for 90mm/3.5 inch wide fabric strips. This was made using the customizer by…

Pobrania
87
Polubienia
36
Ocena
5
P

tape maeasure Parkside pegboard mount

Simple mount for tape measure to Parkside pegboard. Inner dimensions 65x37 mm. Easy print, no supports needed. PETG and 3 perimeters recommended. Attach with two M5x5 screws from behind. If you don't have so short M5 screws (as i don't),…

Pobrania
83
Polubienia
19
Ocena
5
P
PrintablesMaWoKo_3D_Druck

Box Square V2 Stapelbar

Hey, einfache Box 101 x 150 x 55 mm gedruckt mit 15% Infill ohne Stützen, habt spass happy Printing Hey, Simple box 101 x 150 x 55 mm printed with 15% infill without supports, have fun happy printing

Pobrania
72
Polubienia
7
Ocena
4,5
P
PrintablesHelle

BOX 200mmx150mmx100mm - Stapelbar mit Schublade

Passt viel rein, lässt sich stapeln

Pobrania
68
Polubienia
8
Ocena
0
P
PrintablesJakub Hlavatý

Sewing tape measure box (magnetic) / Krabička na krejčovský metr (s magnety)

2-piece box to wind and keep a sewing tape measure. Models include cavities for 2x2 circular magnets (8mm diameter x 1mm) that hold the 2 parts together. To make the parts turn more freely I filed/sanded down some irregularities (seams)…

Pobrania
52
Polubienia
4
Ocena
0
P
PrintablesDik Harrison

Tape dispenser for mounting on the side of a cabinet.

In my workshop, I was using a pegboard-mounted rod to hang my tapes on and wanted something better. I saw and tried "tape dispenser - side mounted" by book (https://www.printables.com/model/514012-tape-dispenser-side-mounted) but found it…

Pobrania
48
Polubienia
12
Ocena
5
P

Tapeholder

I always had the problem in my workshop of finding the right tape when I needed it. So I made this holder for my organisation wall (the wall consists of two pieces of wood sawed at an angle). my holder can hold up to 5 rolls of tape. If…

Pobrania
41
Polubienia
32
Ocena
0
P
PrintablesMaWoKo_3D_Druck

Stapel Box Easy Schmuck V3

Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…

Pobrania
39
Polubienia
3
Ocena
0
P
PrintablesTraincrossin

Gridfinity Tape Measurer and Tape Holder

Store all of your tape related things here! There's a spot for a tape measure and two half circles to hold tape or other circular things like an Oreo. Actually, fill up the tape measure bin with milk and dunk your Oreos, you could do that…

Pobrania
35
Polubienia
3
Ocena
0
P
PrintablesMaWoKo_3D_Druck

Stapel Box Easy Schmuck V2

Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…

Pobrania
32
Polubienia
2
Ocena
0
P
PrintablesMaWoKo_3D_Druck

Stapel Box Easy Schmuck V1

Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesDabovos3D

Tape Dispenser

Simple tape dispenser with spikes, for easier dosing.

Pobrania
30
Polubienia
8
Ocena
0
P
PrintablesMuad´Dib

Držák izolepy (Tape Holder)

Držák izolepy padne do ruky, proto jej lze využít nejen u stolu v kanceláři. Páska izolepy se nasdí na trn a zabespečí se nasazením čepičky. The adhesive tape holder fits in the hand, so it can be used not only at the desk in the office.…

Pobrania
29
Polubienia
6
Ocena
0
P
Printablesaddius8

Razorblade blade holder for 50mm Tape Roller by Leon.Reijnders

Supports razor blades for Leon.Reijnders model. Uses 3 M5 screws 3mm ideal length. Blades secured with M5 screws, halved

Pobrania
28
Polubienia
6
Ocena
0
P
Printablessternli27

Label Holder for Treston 1950 Stacking Bin Organizer Stapelbehälter Sichtlagerkasten

I designed this plate to attach larger labels to the stacking bin. Can be printed without support material and clips quite easily to the container. The plates for the 1930 and 1950 models are different. Here you can find the 1930 model:…

Pobrania
27
Polubienia
6
Ocena
0
P
PrintablesRiver Lavinia

38mm(1.5in) Adapter for Guillotape

38mm(1.5 in) adapter for the Guillotape Tape Dispenser. Print with support. Press between TapeHolderX2.stl. 23min print with Input Shaper!

Pobrania
27
Polubienia
1
Ocena
0
P
PrintablesMaWoKo_3D_Druck

Stapel Box Easy Schmuck V5

Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesRubinjoni

Duct Tape Box

A simple box that fits into a Duct/Duck tape spool. Sliced as a vertical vase. I had several good prints on Prusa Mk3S+, with ABS and 0.8mm nozzle. The lid fits snugly in the box - depending on the material and printer, might need some…

Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesMaWoKo_3D_Druck

Stapel Box Easy Schmuck V4

Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesMaWoKo_3D_Druck

Stapel Box Easy Schmuck V6 für Halsketten

Hi, ich habe eine Stapelbare box gemacht für Schmuck gut zu drucken ohne große stützen. Gut zu kombinieren mit meinen Klapp Boxen https://www.printables.com/model/1026637-klapp-korb-folding-basket-2024-update-2025 gedruckt mit einer 0,4mm…

Pobrania
21
Polubienia
0
Ocena
0
P
Printables3d_funPrints

Duct Tape Hanger

Sturdy hanger for all sorts of duct tapes (also heavy duty) Mounts with hidden M3 screw Simple design, easy to print, no supports needed . Suitable for HSW organizer with screw-mount . Watch this video for more informations:…

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesHartmanPrints

Duct tape holder

Needed a good way to store my duct tape in my mobile workspace. I will screw it to my table so there are 2 4mm holes in the bottom i will use #8 screws to secure it in place.

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesMichal Piskot

Tape holder - stackable

This is simple stackable tape holder for smaller tapes with max 24,5 mm inside diameter. Basic transparent small tape has dimension around 25,5 mm inside diameter and around 15 mm height. Segments are connected by M10 thread. Heights of…

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesDanB

CEN-TECH 100 ft Open Reel Measuring Tape center hub replacement parts

These are the parts for a CEN-TECH 100ft (30m) Open Reel Measuring Tape center hub replacement. There are four parts to replace when the center hub gets broken. I had the tape attach pin break off the Inner Spool which also damaged the…

Pobrania
16
Polubienia
1
Ocena
0

tool holder insert morse taper MT3

Tool holder insert MT3 (Morse Taper 3) This is a printable insert for 35mm (1-3/8") square mild steel tubing. When it comes to heavy tools, a tool holder made of steel is a great option. I've made this insert so that You can click into…

Pobrania
11
Polubienia
3
Ocena
0
P
Printablescodysechelski

Soft Tape Measure Spool Remix - Parametric

👇 See sizing instructions below 👇 Original Tingivese Description This is a remix on ohmg's tape measure holder . Thank you for providing the STEP file! My wife's tape measure had a rivet holding on the metal end, so I had to make a notch…

Pobrania
15 380
Polubienia
6840
Ocena
4,92
P
PrintablesKevin.S3

Tape Cutter

Created this tape cutter for convenience. Great for packing boxes. Simple and it works well for me. Only takes 40mins to print. No supports required! Print upright. 0.2mm layer height, infill don't matter (default 20%) Will be adding more…

Pobrania
14 033
Polubienia
4634
Ocena
4,3
P
PrintablesJack

Tape Clip

A Clip to keep the tape end free with tear-off ridge 2 parts, printable without supports use »BigTeeth« version for a functional serrated tear-off ridge if you have a bigger nozzle/line width. use »Blade-Heat-Insert« to heat insert a…

Pobrania
8048
Polubienia
4719
Ocena
4,51
P
PrintablesRyukyuD

Modular Tape Storage

Oct 14, 2026 - Please don't print this model. The design is flawed; the retaining clips break off, making the dowel section useless. This will be redesigned to use a threaded attachment instead, hopefully within the next week (~Oct 21,…

Pobrania
7831
Polubienia
4330
Ocena
4,9
P
PrintablesDoma

Soft Tape Measure Spool

Summary Soft Tape Measure Spool for a 5/8" wide, 5ft long soft tape measure. Super glue end of pin into core. Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.4 Infill: 20% Filament brand: Any…

Pobrania
5057
Polubienia
1504
Ocena
4,62
P
Printableseof

Side Protection for Electrical Insulating Tape /Seitenschutz für Isolierband

If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…

Pobrania
4996
Polubienia
2863
Ocena
4,79
P
Printablescourroux

Skadis Tape Hooks

Tape hangers/hooks for the IKEA Skadis pegboard.

Pobrania
4616
Polubienia
828
Ocena
5
P
PrintablesDaniel Alberski

Parametric measure tape holder

Features: No extra screws or glue needed Supports multiple tape widths and lengths - parametric Fusion 360 file available Pre-rendered versions for 14 mm, 18mm and 22mm tapes (max length ~150 cm) A universal wide slot to fit all metal…

Pobrania
4434
Polubienia
1559
Ocena
4,84
P
Printablesvidision

Safer Cutter for Tape & Boxes

As much as my kiddo loved the first cutter version, the point was too pointed and sharp to be safe in his hands. This version still has a point but it is turned inwards for safety. With this shape, getting the point started usually…

Pobrania
4289
Polubienia
1189
Ocena
4,83
P
PrintablesTIMakes

Hand tape cutter | 8 sizes | 100% 3D printed

New version available, much stronger and it cuts plastic tapes: https://www.printables.com/model/1761248-packing-tape-cutter-2-sizes-100-3d-printed Optimized for paper-based tapes, where it provides clean and smooth cuts. It can handle…

Pobrania
4223
Polubienia
1681
Ocena
4,75
P
PrintablesStopa

Bias Tape Maker 5cm (Zakladač šikmého proužku)

This is a remix of bias tape maker from https://www.thingiverse.com/thing:3880491 by Oscarko. It is increased by 150% (for 5cm tape), the wings are clipped a bit and the bottom is flattened for better bed adhesion. Print instructions…

Pobrania
3960
Polubienia
435
Ocena
4,97
P
Printablesdebren27

Bambu Build Plate Holder with 2-8 tapered slots, open infill, optional tongue

Also available on MakerWorld! Model 41379. Come join the party! UPDATE November 27, 2025: I have confirmed that scaling the model to 129% on X works for H2C build plates. Scale it before rotating it to fit. You can also just use the same…

Pobrania
3727
Polubienia
419
Ocena
4,97
P
PrintablesSOME Studio

Tape Measure Multiboard Mount

A mount for a tape measure or anything that has a belt clip. This works with multiboard . It uses the peg holes. Print in the following orientation with outside brims on. No need for supports.

Pobrania
3630
Polubienia
398
Ocena
4,98
P
PrintablesLansolo81

Ikea Skadis Hook / Tapeholder

Ikea Skadis Hook 50mm I like Pavel's hooks(thank you) https://www.printables.com/de/model/37082-ikea-skadis-hook-collection-kolekce-hacku but I wanted a hook that would sit a little higher in the hole to save a bit of space. Works great…

Pobrania
3297
Polubienia
375
Ocena
4,91
P
PrintablesVari

Tape Dispenser - Handy

Print-in-place tape dispenser. Almost takes no more place than the tape-roll itself, so it can fit in your pocket. No supports required. Tested with PLA and PETG, may also be printable in ABS and any other rigid materials. The design…

Pobrania
3167
Polubienia
739
Ocena
4,43
P
PrintablesAron Shroll

Fabric Flat Tape Measure Winder

This is a super-easy 2-piece fabric tape wind-up device for 60", 90" and 120" flat fabric measuring tapes. I got tired of the mess and losing the rubber band that held mine together. Plus, I wanted something that I could wind up when I…

Pobrania
2610
Polubienia
856
Ocena
4,86
P
Printablesippe

Tape Holder for Honeycomb-wall

Use at least 3 walls to get proper strength. You need support no matter what stance you print this. Tape does not give much weight to this holder, so you might want to print this vertically to minimize filament needed for supports.

Pobrania
2555
Polubienia
445
Ocena
4,88
P
PrintablesChrizz

Fallout 4 / Fallout 76 HoloTape Replica

NOTE: Better Pictures Coming Soon! Fallout 4 / Fallout 76 HoloTape Replica NOTE: The tiny holes are meant to screw in a small screw. I created the Fallout 4 HoloTape a while ago but never printed nor released it. This HoloTape is an exact…

Pobrania
2494
Polubienia
916
Ocena
5
P
PrintablesPreusche-3d

Teebeutelspender - stapelbar

für 25 Teebeutel leicht zu drucken minimalistisches Design Sichtfenster Teebeutel organiseren

Pobrania
2328
Polubienia
301
Ocena
4,75
P
PrintablesSINGH DESIGN

Tape Dispenser, Automatic Tape Cutter

Manual tape dispenser with automatic cutting Practical and intuitive, this manual dispenser allows you to cut the adhesive tape with a simple turn of the knob. Ideal for packaging, offices and craft activities, it guarantees precise cuts.…

Pobrania
2255
Polubienia
644
Ocena
4
P
PrintablesPeachesNZ

Soft measuring tape extended handle - Remix

Added a raised flat handle to make turning easier. July 2024 :- Updated handle files to match the different base sizes from codysechelski project

Pobrania
2221
Polubienia
825
Ocena
4,79
P
PrintablesBuilderDadDan

4 Roll Tape Holder for Packaging and Utility Tape

This 4 Roll Tape Holder is a convenient storage solution designed to hold four rolls of packaging tape, keeping your workspace tidy and tape easily accessible. I personally use it for various types of tape, but it’s sized perfectly to…

Pobrania
2207
Polubienia
844
Ocena
4,86
P
PrintablesWillemde20

Honeycomb storage wall tape measure holder

Simple attachment to hold a tape measure

Pobrania
2177
Polubienia
317
Ocena
4,77
P
PrintablesPhillip

Tapeosaurus - Cute Dinosaur Tape Dispenser

A cute dinosaur that dispenses your tape! Improvements over previous version Stronger - I improved the stability in some places where pieces could snap More Sizes - Added a new size for 19mm wide tesa tape. Additionally the rebuild is a…

Pobrania
2158
Polubienia
1124
Ocena
4,65
P
PrintablesManicken.se

Skadis / Skådis adjustable tape holder

Keep your tape rolls organized with this adjustable tape holder designed for the IKEA Skådis system. This versatile holder fits tape of all sizes, making it a practical addition to any home setup. The design includes two side arms with…

Pobrania
2124
Polubienia
539
Ocena
4,9
P
PrintablesWhity

Brother TZe Label Tape Cartridge Rugged Box

The case is based on my parameterized “ Rugged Box ” and holds Brother TZe label tape cartridges. I also made a stand/catch tray for the P-Touch P700 label printer . Support my work For non-Prusa parts and filaments, check out 3DJake (…

Pobrania
2095
Polubienia
424
Ocena
4,97
P
PrintablesRossero

Mini flexible tape measure spooler

This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…

Pobrania
2030
Polubienia
1025
Ocena
4,69
P
PrintablesMachoThick

Gridfinity Tape Dispenser

Here is some gridfinity storage for standard 19x60mm tape rolls with a 25mm-ish (1") center hole. Scotch tape or equivalent. You know the ones. Worn out hack-saw blades will frequently have some still usable teeth near the ends so there…

Pobrania
2016
Polubienia
437
Ocena
4,82
P
Printablesromanslezak78

50mm Tape Dispenser Cutter - remix

I was inspired by the 50mm Tape Dispenser Cutter. But it didn't work to my liking I drew it to my liking.

Pobrania
1971
Polubienia
334
Ocena
4,56
P
PrintablesBiomech

Wall-mounted tape holder

Fully 3D-printed wall-mounted holder for multiple rolls of tape. Print one L mount, one R mount, and two sticks. Update 1.12.2024: Added a middle mount to extend the tape holder in the row.

Pobrania
1950
Polubienia
1004
Ocena
4,91
P
PrintablesSuper7

Honeycomb Storage Wall - Tape Hook

Tape hook for Honeycomb storage wall. Suits typical painters maskign tape roll 48mm wide, 76mm inside diameter.

Pobrania
1936
Polubienia
476
Ocena
4,88
P
Printablesgoodjobswe

Guillotape Tape Dispenser

Has mundane office work left you in a dire need of excitement? Inject some dark thrill to your desk with this latest invention, Guillotape: The Guillotine Tape Dispenser. Imagine the Addams Family meeting the French Revolution in the…

Pobrania
1871
Polubienia
1922
Ocena
4,96
P
PrintablesRelaxed Maker

Winding Case for Sewing Tape Measure

YouTube Video ( https://youtube.com/shorts/rRwxUmyBnUs ) Overview This model has a top portion that holds one end of the sewing tape measure and a bottom portion that can rotate relative to the top portion. The top portion has a ring that…

Pobrania
1869
Polubienia
398
Ocena
4,8
P
PrintablesJayFiDev

IKEA Skadis - Tape Holder

Tape holder for 40mm thick rolls. Print Settings Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Organization

Pobrania
1846
Polubienia
440
Ocena
4,95
P
PrintablesFrancs

Multiboard Tape Measure holder

There are 3 models with different attachment types for the Multiboard. It can be used for tape measures and safety glasses. The snap need to be printed with supports. There is also now a thicker version for heavier tape measures Credit to…

Pobrania
1729
Polubienia
148
Ocena
4,85
P
Printablesserialx

Brother P-touch TZe Label Tape Gridfinity Storage Box

This is a gridfinity native Brother P-touch TZe Label Tape storage box. This can store tape cartridge larger than 12mm.

Pobrania
1654
Polubienia
324
Ocena
4,92
P
PrintablesLutraVulgaris

electrical tape holder gridfinity

if you need a different size let me know

Pobrania
1608
Polubienia
258
Ocena
4,93
P
Printableshxr

Horizontal Tape Dispenser

It's a recreation of a Tenex 300 series tape dispenser. I used a 20mm wide metal tape cutter blade from another old dispenser. The top half can just be pressed on the bottom half and you could fill the holes with sand if you want to make…

Pobrania
1608
Polubienia
1150
Ocena
4,85
P
PrintablesJungl3

HSW tape mount

Mounting solution for HSW. Designed to print in half to avoid supports. Print Settings: layer height: 0.20 Perimeters: 3 Infill: 10% place the left and right side close together in the slicer and print both at once, as opposed to printing…

Pobrania
1604
Polubienia
330
Ocena
4,94
P
PrintablesJuMo

Sewing tape measure holder

Does not require any infill. Original model with Ø 28mm, rescale in your slicer to fit your own tape measure.

Pobrania
1553
Polubienia
565
Ocena
5
P
Printablesjs500

Tapestry Insert / Organizer - Fits All Three Expansions (Fantasies & Futures, Arts & Architecture, and Plans & Ploys)

This is an insert for Tapestry, including all three of its expansions (Fantasies & Futures, Arts & Architecture, and Plans & Ploys). Here are some of its features: Gives each landmark mini its own custom-shaped storage location. Supports…

Pobrania
1485
Polubienia
174
Ocena
5
P
Printableshxr

Horizontal Tape Dispenser Gridfinity Remix

after an insightful comment from @Bischi_244918 i've remixed my tape dispenser to fit on a 2x4 Gridfinity grid.

Pobrania
1436
Polubienia
943
Ocena
3,94
P
Printablesmnc241

Skadis Tape Measure Holder

This was printed with a 0.6mm nozzle, & 0.35mm layer height.

Pobrania
1368
Polubienia
241
Ocena
4,79
P
PrintablesKen Mills

Cassette Tape Dispenser

Holds two rolls of standard cellophane tape (aka Scotch tape) in an oversized or near 1:1 retro cassette. Side opening help keep track of how much is left on the primary and spare rolls. Print in your favorite colors and customize the…

Pobrania
1355
Polubienia
1035
Ocena
4,81
P
PrintablesC1RKT

Cheap Tape Dispenser (Cutter Built-in)

The most compact tape dispenser yet! Can fit regular Scotch tape 20mm radius 20mm width. No support, no adhesion! Recommended Print Settings: ≤0.6 nozzle ≤0.2 layer height 3 walls 20% grid infill No support No Adhesion

Pobrania
1349
Polubienia
510
Ocena
4,5
P
Printablesforsaken_candy

Multiboard/HSW tape measure mount (for any tool with a belt clip)

Multiboard and Honeycomb Storage Wall holder for tape measures with a belt clip. Print upright without supports. Updates 23 Apr 2023: Added version B with unneeded material removed. Just choose whichever looks better to you. 03 May 2025:…

Pobrania
1331
Polubienia
199
Ocena
4,95