Wyniki wyszukiwania: testing

testing boobs cube

Case for C2C CaberQU USB-C testing board

Protect your board with this case

Shape Sorter for QA testing

Blocks can be placed in the corresponding holes in the lid. If you work in Quality Assurance, you will notice that all the shapes can also be placed in the square hole, as shown in this video that inspired the design:

Small electronics testing plate

Simple print of breadboard plate for electronics prototypes. I recommend to add some self adhesive rubber pads to prevent sliding, eg. https://www.amazon.com/Square-Self-Adhesive-Rubber-Furniture12mmx12mmx6mm/dp/B00H8UTNY4 Spare space is…

An object for testing false crash detections on Y-axis

This is a simple model of cylinder that prints using 0.05mm layer height and Prusament PETG temperature settings. When printed in enclosure (I'm using Prusa Box aka Printer Box) at 125% speed, MK3S+ detects a lot of false crashes as…

All infill combinations ISO 527-2 testing specimens

The "group" files (pct) originate from my bachelor's thesis and exclude 35%, 45%, 55%, and 65% (we decided in initial testing that we could skip these). They also exclude Support Cubic, as there is no difference between it and the…

Elegoo Resin printer testing STL, chess piece, rook

I didn't design this model, it was from the Elegoo Mars 2 Pro Mono 2K resin printer USB drive. I printed this in one of my review videos, you may download it if you want to test this model on your own printer. Category: Chess

The RIG (R1.1) — DIY helper stand for testing electronic components

ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…

Flex tubes for testing TPU

Different flexible hoses for testing TPU. Print Settings Printer Brand: Creality Printer: Ender S1 Pro Rafts: No Supports: No All parts can be printed without supports. The short part is having some imperfections. Resolution: 0.2mm…

Bambu Lab X1CC AMS Colour flush testing - Test process

I think the settings in Bambu Studio are on the very safe side when it comes to how much filament is flushed during a change. I wanted a way to test what would be optimum. I thought about how best to approach this and came up with a plan.…

Fuzzy Skin Parameter Testing

I've been experimenting with using the Fuzzy Skin setting in Orca Slicer and have really liked the results. However, I was struggling to develop an intuitive understanding for the interactions between “Fuzzy skin point distance” and…

3D Printers Testing Print Set (UPDATE V3)

UPDATES: V3 (2024-08-14) Added Part Cooling 360 TEST V2 STL files V2 (2024-04-25) Added STL file from the Print Layer Consistency Testing video 3D Printer Benchmark Print Settings To run these tests I used Orca Slicer with the settings…

Moza ES Wheel mean't for testing purposes only

Simple moza es wheel designed after the 12 inch rim mod, meant to be used as a basis for other custom wheel rims.

Voron 2.4 color testing Fusion assembly

I wanted to explore some color combinations for my upcoming V2.4 build, so I've put together a purpose-built version of the [official CAD model](https://github.com/VoronDesign/Voron-2/tree/Voron2.4/CAD) with printed parts grouped by…

Audi testing fillament

Hello, here is a file to test the filament and the printer. It is a small audi quattro, fast to print. For a better test I recommend to print with 0.07mm (ULTRADETAIL) .

Open RC truggy HOT ROD body (for testing!)

Hot Rod body for Open rc truggy. it for testing, i dont have openRC chassis. V 1.1 little modify with flanges and front grill Print instructions Unassociated tags: car body, hot rod, open rc, openrc truggy, rat rod, rc car, rc vehicle…

Tudor Rose Testing Piece and Pendant

I love sculpting Tudor roses and ages ago, I made this piece as a test object for personal use, as you can see from the pictures. Someone requested I upload it, so here you go.. There are 3 variants: loubie_tudor_rose_simple_test.stl This…

TEST print-The Fastest Print for Testing Filaments and Printer Settings.

TEST your prints faster with this model. try different temperatures, infills, filaments, settings, and more with this model that will give you a good idea on what are the best settings. faster than a benchy boat and smaller details. less…

Stable Mechanical Keyboard Switch Testing Board

I remixed my own design to add a bit more stability to the testing board. I found that while the previous design printed fine, it was a little too flexible so I added more legs and increased rigidity. It's still not as good as, say, one…

Profile T-slot original Prusa model ant T-nuts for testing

The original profile from the design of the Prusa i3 printer. In addition, M5 threads are already made in the corner holes. Included: Profiles 30x30 mm, height 100 mm Profiles 30x30 mm, height 50 mm Profiles 30x30 mm, height 20 cm T-nut…

4-wire Cell Holder for Battery Testing 18650 21700

Over the past several years, I've used many different cell holders for testing batteries. I've tried many options from the cheap leaf spring cell holders to expensive aluminum-framed universal cell holders, but none of them got everything…

Quick Overhang Testing

Use notches to indicated orientation. Stars form 50 degrees end with 80 degrees. With 4 side for cooling distribution test.

Don't download this - (Ratchet screwdriver) - suffers from creep so doesn't last. Have better design that should last - am testing now. Message me if you are keen on the new version.

Got my Prusa i3 2 months ago and love it. Was thinking while building it an allen key T handle would make sense. And a nut holder/driver. I may have got a bit carried away… The idea is to use the screw driver “ends” in your fingers or put…

Testing Testing

Just print it to see if your printer is cool enough

to scale 20kg servo model for RC testing

made on exact dimensions of 20kg servo in mm

Automated Thrust Testing Stand Powered by Arduino

This model provides a cheap and universal means for reliably measuring the static thrust of your brushed or brushless motors. It is powered independently of the motor, allowing a wide variety of configurations to be tested. Build Video…

Cat shaped testing tube holder

This was an original creation, at first created by a request of a friend who is a veterinarian. I like sharing the creations so it is now available on Printables. 10 or 15% infill is fine. no supports needed. Did you like this project?…

Klipper Pressure Advance testing tower (OpenSCAD)

This is a remix of the Klipper Pressure Advance Tower by davorin. I liked their OpenSCAD tower, but made my own customization to allow for indents on every level. This is achieved by a simple subtraction using the difference() method in…

Precision Multimeter Tweezer – SMD & Small Component Testing Tool

Precision Multimeter Tweezer for SMD and small components Introduction Traditional multimeter probes can sometimes be inconvenient when measuring small components or testing printed circuit boards. To address this, I designed a pair of…

Small Spool Adapter for Bambulab AMS - concept model for community testing.

I had a number of 250g and 300g spools of filament that I wanted to use with my Bambulabs X1 Carbon in the AMS. These are too small to work in the AMS, so I designed in Fusion 360 a simple 3 part spool adapter, that using a bar with an…

Gridfinity bins with multi-color text for testing height

1x1 Gridfinity bins from 1U to 13U height, with text describing their height inside and on the bottom of the bins. For multi-color printing. Made to make it easy to figure out what height bin or stacked combination of bins makes sense to…

Citadel testing part / benchmark piece / WAAAGHammer paint benchy

A small testing part originally made by CITADEL . Very usefull for testing for testing paints, washes and new techniques. RECREATED by me, code name PERMATEUM. I definitely suggest printing it at high resolution, but if you want to save…

Drysuit plugs for leak testing

Lower material use and faster print speed from the original model

Stellafane Foucault-Ronchi Testing Stand

This Foucault-Ronchi testing stand is a variation on the classic design presented by Stellafane here: https://stellafane.org/tm/atm/test/tester-main.html The primary issue I had with the design is that digitized plans weren't really…

Pattern to align bed and corners testing

Slice it according your printer and material you'll be using, yo can check not only the bed leveling, but the relative nozzle centering against bed, takes really few time to be printed, and allows you to fine tuning the z offset. 20250903…

Filament Flow and Tolerance Testing Tile

I use this quick test after changing filaments to ensure that flow calibration is dialled in for good first layer adhesion, squish, and tolerance. Different colour filaments, even of the same brand, can have very different flow…

Airspeed Testing Ducts for Axial 4020 vs Blower 5015 fans (UNI-T UT363)

I made these when I was testing axial vs blower fans for print cooling. 5015 fan mounts just by friction, 4010 & 4020 fans mounts by basic 3mm wood screws. Video if you want the details:

lego technic pin and axle hole size testing board (main) (in mm)

This is a main pin hole testing board which should be used first before moving to the refining pin hole testing board. This model was made because I was tired of my prints not being able to work with lego technic axles due to the hole…

2.5 2.75 and 3 inch Boost blocking cap for testing turbo intercoolers and silicon or rubber pipes

This model is 100% free and open-source. I don't run a Patreon or ask for tips, all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or post a picture of your build. It takes one second, costs nothing,…

Micro Servo Testing Mount

This is a simple housing to securely stand your micro-servos while testing. I currently have this holding my servos next to my breadboard while testing.

Universal Tensile Testing Machine V2 (REMIX) +UPGRADES

Main parts I used: - 500kg load cell https://www.aliexpress.com/item/32866914213.html (200-300kg probably would be more than enough, as without upgrades I wouldn't be comfortable running more than 150kg loads on the machine). - Load cell…

Destructive testing mechanical hammering machine

Overview This machine is inspired by a testing rig made by Fireball Tool for this video: To see it in action, as well as see step by step assembly instructions, please see my video: Source CAD…

Various specimens for material testing

Different specimens for material testing. Details to follow soon.

minimalist TrackIR holder for fast testing (head tracking)

This is a minimalist TrackIR holder which ensures the right (default) distances between the IR-leds.

Support testing element

Test your basic support settings with this shape. Features to look for: Test how looks layer directly above supports. (Z-offset top, Cooling) Test how easy it is to remove support structures from inside rectangular shapes (Z-offset top &…

Mobula 7 Canopy (protoype-testing)

Based on a Viking helmet model originally shared on Autodesk’s community platform, licensed under CC BY-NC-SA. Modified and adapted as a Tiny Whoop canopy. All credit to the original designer and Autodesk. Not for commercial use.

Port-a-cath for testing/training

This was printed for a friend to use as a cheap alternative to training port-a-cath devices.

1x1x1 cm Testing Cube

A small cube that can be used for anything!! to use to try your printer for some reason or just to have a cool cube!

Hex nut min/max size shapes for testing models

The line above the number signifies that the nut is the max dimensions. The line below shows it is the min dimensions. Machine size #3 shows |3 instead of 3 to differentiate it between M3. This model was built in Openscad, I will post the…

Pot for water testing for Modular Hydroponics Tower by Thingiverse (5712775) / Topf zur Wasserprüfung für Modular Hydroponics Tower

Pot for water testing for Modular Hydroponics Tower from Thingiverse (5712775) . Thanks and regards to Luitzor for creating the tower. The pot can be printed multi-material or single material. How it works: Place the pot in the tower…

3D printer bed scraper with replacable tips (TESTING)

Overview This customizable bed scraper is an essential tool for any 3D printing setup. Unlike metal scrapers that can scratch and damage your expensive build plates (PEI sheets, glass beds, magnetic surfaces, etc.), this design uses…

Raspberry Pi Apache 2800 Pentesting Rig

Overview This project integrates a Raspberry Pi 5, 10.1" display, power bank, cooling system, and peripherals into an Apache 2800 case from Harbor Freight. This is a precursor to the Raspberry Pi Briefcase Pentesting Rig . Note: This…

Part 445 G36 Loading tool, best version added several months of testing

G36 Heckler & Koch

Testing leads holder

I made these little spools to get rid of the measurement leads where are always hanging over the bench when not in use. The design was inspired by the garden hose holders. Mounting: You can fix them directly on a surface or with the…

Centauri Carbon Vented 7.5 mm Side Panel Spacer - Beta Testing

The idea behind this is to minimize the vertical space used by the printer. That means no risers. But, what if venting is desired without removing the top? This is an answer to that. Testing shows that it is difficult to design a…

3D printed Lynx blaster flatbars (in testing)

I am attempting to make the lynx a low hardware blaster for people who can't afford or acquire the hardware necessary to build the blaster If you do have a lynx, a decent size 3D printer (size fits a ender 3 max neo) and want to test it…

6x3 Neodymium Magnet Strength Comparator / Testing Jig

This jig will allow you to compare the relative strengths of neodymium magnets. Press fit a single magnet into the hexagonal base and leave it. In your slicer split to objects and arrange to put plunger separate to base on build plate. To…

HF current probe for EMC/EMI pre-compliance testing

This HF current probe is for testing radiated emissions from cables, for troubleshooting (potential) EMC/EMI problems. Conclusive radiated emissions tests are done in an anechoic chamber, but this is expensive and these "far-field"…

Tensile testing specimen

Infill 100%

testing the 3D printer material/dimensions

I have watched many videos about finding the right 3d printer material temperature (there are many temperature towers), and many videos for understanding the tollerances of your printer. In both cases I haven't been satisfied at all. with…

Temperature Testing Cubes (220-200)

(SPLIT BY OBJECTS) They're quite small when imported but just scale them to your decided size. for people who can't edit their gcode to change temps each time, so print them individually.

Component Sorting & Storage Tray System with Calibration & Torture Testing all in one!

This is a stackable component sorting & storage tray system which also provides Printer Calibration stress & testing. Main Features of the Tray system: Stackable Label Insert Pockets Pouring Ports for ease of re bagging parts. Secured…

PC/104 CubeSat PCB Testing Mount

A PC/104-spec PCB testing mount to screw in any PC/104-compatible PCB (e.g., onboard computer, electrical power system). Print this model with 0 top layers and 0 bottom layers to see through it. Work wells. This model helps protect the…

Galaxy S24 Ultra Portrait Mode for GameSir G8 Plus (needs testing and feedback)

I whipped this together as a proof of concept, I don't own the phone myself - will need feedback from S24 Ultra owners on what doesn't work/fit/etc. I'm hoping the phone can mostly slide in from the top and sit in firmly place thanks to…

YourLocalWalmart's Roblox figure Testing V4, V3, V2, and V1

...

T8 LED Tube holder for testing using DIN rail or 20x20 profile

T8 LED Tube holder for testing Print instructions Category: Electronics

Pixy2 testing stand

Pixy2 stand just for camera testing Screw: M3x6 or longer Tips: If your slicer permits, print the last 10 millimeters with 100 micron layers. Will result a better shape of holes Print Settings Printer: Hephestos2 Rafts: No Supports: No…

4FE32 Faltal Speaker Enclosure - Guitar Frequency Testing & Audio Projects

Professional-grade speaker enclosure specifically designed for the 4FE32 Faltal speaker, engineered for guitar frequency testing and versatile audio applications. Design Features: • Precision-Fit Design - Custom-engineered for 4FE32…

Tolerance / Clearance Testing Gyro Coaster

Yet another thing for testing tolerance, no elephant foot compensation added so you may want to turn up your first layer horizontal expansion, I used -0.2mm. Use it to see which clearance work best for you! Print Settings Printer Brand:…

Arms stand for testing quartz watches or PCB

This is a holder for various PCBs allowing to contact specific places on the board being held. Might be useful for debugging Quartz Watches and other small devices. Additional parts needed: - Rubber O-rings: 4mm outer diameter / 1mm…

Sony E/FE focus testing screens

I am currently working on some basic designs with simple optical elements in 3D printed housings. At the moment my optical elements mount with M42 threads onto simple helicoids that I adapt to Sony cameras. As I get towards finished…

Base for testing MG6535 and other medium size servo

A base for testing medium sized servos. I mada it as a base for testing a robot arm based on this kind of servos.

Ryper BearHemera MMU2S [UNDER TESTING]

Ryper Mod from the nice Bear Hemera and modified to work with MMU2S+1 Ryper mod. It requires a special firmware version not published, if you like to use Hemera with MMUs you need to choose currently another design with a filament sensor…

F1 OpenRc aero testing rig

Get your F1 car ready for off season testing. Category: Hobby

Fan speed testing Jig (And testing results)

Very simple fan wind tunnel to test the fans wind speed with an General DAF3008 Anemometer. I understand this might not work for everyone (many different Anemometers out there). So i attached a step file if anyone wants to change it. I…

animal testing protest

hello this is a model to protest against animal testing. I have entered this model in a 2023 Idaho 3d modeling competition and it won my school 2nd place. I hope people can realize what animal testing can do to the world and i hope that…

Automatic Pause (gcode) testing and guidance model for Creality Print

Are you using the CrealityPrint slicer for one reason or another and would like to have the printing stop automatically at the right point? If so, then with these instructions it is possible. If you don't use that slicer, you probably…

Glucose Testing Organizer

I couldn't find a way to organize my blood glucose testing supplies and equipment, so I made one. It has trays that hold 14 lancets, and space for 8 trays. They pull from the fron and load through the back for easy access. I included a…

Multi material happiness testing model(3mf,stl)

This model helps you work out if materials work together in just a small amount of time. Use the 3mf file and add your own material or add the multimaterial spots in the slicer yourself. Goodluck and get happy! Picture with the printed…

Thin wedge wall for Arachne testing

This is a thin wall wedge for testing the Arachne slicing scheme. It has a 100mm long by 2mm high tapering wedge from 2mm to 0mm, and will show: The measured length of the printed wedge shows how thin that thin walls can be printed.…

Stairway for slicer layer height testing

Stairway for slicer layer height testing, steps are not multiple of a layer height

Double AA battery testing case with screw terminals

You can customize whether you want the batteries in parallel or series. It is reccomended you print the contact retainer at 0.10mm layer height (or use a smaller diameter nozzle). Here are the hardware I used for this model: Battery…

Wind tunnel for testing 120mm fan

This design is a 3D printable wind tunnel for testing the airflow performance of 120mm fans. It was designed to be similar to the one seen in The Fan Showdown from the YouTube channel Major Hardware. This can be used to test your own…

Dragon/Rapidburner Rail Mod Mount (Phucaf Beta Testing V1)

This is an Carrier for the Dragon/Rapidburner for the Rail Mod from Phucaf. https://www.printables.com/de/model/721269-enderng-linear-rail-mod-beta With this you can Mount and Dragon or Rapidburner to his mod.…

Magnet Testing Block - 6mm x 3mm

I made this in Fusion to be able to measure the accuracy of different printers and materials when it comes to inserting magnets, in order to get the best fit possible. By printing this quick test block, you can hand fit magnets into it to…

Magnet Testing Block - 8mm x 3mm

I made this in Fusion to be able to measure the accuracy of different printers and materials when it comes to inserting magnets, in order to get the best fit possible. By printing this quick test block, you can hand fit magnets into it to…

Full Spectrum Testing Array

I made this simple testing array to combine different colors together and have as a reference for the future when coloring prints. This is to be used with Full Spectrum in Orca Slicer and should generally only be used if you have a tool…

Xol Armchair Rail Mod Mount (Phucaf Beta Testing V1)

This is an Carrier for the Xol Toolhead from Armchair, for the Rail Mod from Phucaf. https://www.printables.com/de/model/721269-enderng-linear-rail-mod-beta With this you can Mount and Dragon or Rapidburner to his mod.…

Fly Testing Tank

Here is a link to a video I made about how I made the fly testing tank: Water pump: https://a.co/d/et67JR7 Acrylic tube: https://a.co/d/3sUoCXA Clear coat: https://a.co/d/0m0AAE5 Other items I used: suction cup, bent paperclip

X model for first layer testing

Simple model of a X, 100mm 100mm 1mm, to use for testing if the first layer sticks properly to the built plate.

Omniwall Panel 7x9 for testing

A 7x9 piece of an Omniwall panel that can be used for testing while designing Omniwall accessories. The Shapr3D and STEP files are included.

Robust BUCKLES Spring Release TESTING (Remix)

This is an UNFINISHED test of using an integrated spring to facilitate snappy buckle release.

Mitsubishi / Proton roof clip MB814153 [testing]

Being tested at this moment. Might need slight Z-adjustment. Print as is, it might (or might not depending on printer) need few supports on overhangs.

Specimen for Testing Bed Adhesion or Warping / Prüfkörper für Betthaftung oder Warping

In the photos, you can see a print made with ASA filament at a bed temperature of 100 °C and 110 °C.

aeromine testing part-double wing

Hi There, Ilooked at this information yesterday ybout aeromine but I thought it is maybe a hoax again...so I realise a double wing 3d part to be printed which I build to suck water from below. when wind/ an air dryer was used to blow on…

Triad Stencil for Testing Paint Mixtures.

This is a stencil to help draw (on paper or suitable surface) a paint mixing triad design. See James Gurney's excellent tutorials on YouTube for more information. It is a simple 2D guide for use with a sharp pencil or pen to trace the…

Testing lightsaber

Useful for calibration and testing of the printer with challenging overhang and neat design

Ender3S1 ADXL345 Resonance Testing Probe Mount (Bed+Extruder 2-in-1)

Remixed from the original to reduce the size a little, and add mounting holes for Ender3S1 extruder. You will need two M3*4mm heat-inserts and two M3*5mm screws. Extruder mount is done on the top most 2 screws that hold the extruder to…

KDFW Terminal Area (Scaled to Testing Supplement)

A 3d Representation of the KDFW Terminal Area for use as a Teaching Aid for Flight Instructors! Scaled laterally to match the scale found in the FAA Private Pilot Testing Supplement (IMPORTANT: NOT SCALED TO MATCH A STANDARD SECTIONAL…

Digital voltmeter Ammeter - RC battery motor testing

Notes: don't print the reference combined file uses M3 screw and nut to tighten uses 2 male and 2 female XT90 sparplug look at combined parts for reference use fitting screws to fasten the bracket use shunt that is correct for your…