Wyniki wyszukiwania: ther

Sortowanie

14 767 modeli

P
PrintablesMikolas Zuza

Small Clip - for herb bags & other packaging

I use these mainly to close herb bags, but I've found they're handy for all sorts packs, like breakfast cereals, tea leaf bags, etc. The included 3MF has 10 of them. Just "right-click - Set number of instances" in PrusaSlicer to change…

Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
77 658
Polubienia
18 975
Ocena
4,9
P
PrintablesSneaks

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Wydruk około 4,15 €–5,07 € nettoWstępna wycena jednego wariantu

Pobrania
22 705
Polubienia
5392
Ocena
4,92
P
Printablesguss67

Ethernet | RJ45 clip to secure/repair/fix broken tab

This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…

Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu

Pobrania
21 963
Polubienia
7496
Ocena
4,84
P
PrintablesSeppo

Reindeer Christmas Card Snap-Together Reindeer

This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…

Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
13 706
Polubienia
3033
Ocena
4,88
P
Printablesericman314

Snap-Together Marble Maze

A fun little marble maze. No supports required, and assembly is 100% snap-together using ball and socket joints. No hardware or glue required. Requires one marble (not included). Parts base.stl - 1 maze.stl - 1 axle-cam.stl - 2…

Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
10 003
Polubienia
3928
Ocena
4,9
P
Printableskerngebiet

Ethernet Port Dust Cap/Cover - No Supports

Cap/Cover for female Ethernet Ports to prevent dust from getting inside. Easy to print without any supports. You can use a brim if you have adhesion problems. Both, PLA and PETG, are fine. But I would suggest to use PLA, because PETG has…

Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu

Pobrania
9557
Polubienia
3489
Ocena
4,87
P
Printableswedgeworks

Improved Fruit and Vegetable Washing Basin now with Southern Hemisphere support!

***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…

Wydruk około 11,13 €–13,60 € nettoWstępna wycena jednego wariantu

Pobrania
6102
Polubienia
998
Ocena
4,9

🗲 Full-Size Mjolnir 3-piece screw together (Thor's Hammer) 🗲

PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…

Wydruk około 4,43 €–5,41 € nettoWstępna wycena jednego wariantu

Pobrania
5275
Polubienia
1648
Ocena
4,91
P
PrintablesThreeAttic1

Stronger Yet Another Fidget Infinity Cube V2

This is (hopefully, don't actually know) a strong version of Yet Another Fidget Infinity Cube V2. I noticed that whenever it broke it was almost always on the part of a hinge that goes in side one of the cubes. To fix this, I just made it…

Wydruk około 3,12 €–3,82 € nettoWstępna wycena jednego wariantu

Pobrania
4004
Polubienia
145
Ocena
4,89
P
PrintablesDrak

Valentines / Mother's day Mama Rose - Drak

— MAMA Rose — There is a pre added Brims at MakerWorld site (link at the very bottom) — MAMA Rose V2— Whats new in Version 2? Redesigned a whole model to be stronger and also I have added STEP and DXF files — Valentines Rose Stand can be…

Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu

Pobrania
3648
Polubienia
694
Ocena
4,83
P
PrintablesHenlor

Motherboard Fan Mount Mk2 Collection - Creality K1 Series

I designed those for two reasons. First, it's a pain to handle the bottom panel with the fan cable still attached to the motherboard. And second, when printing ABS, I was astonished to feel how hot the frame was. And I didn't like the…

Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu

Pobrania
3534
Polubienia
553
Ocena
4,97
P
PrintablesPrusa Research

Wrist brace (splint) for either hand

Wrist brace (splint) for either hand A more rigid brace, suitable for broken wrist treatment, i.e. fracture of either the adjacent radial bone, ulnar bone, or wrist bones (excluding the scaphoid bone fracture, which requires fixation of…

Wydruk około 4,27 €–5,22 € nettoWstępna wycena jednego wariantu

Pobrania
3297
Polubienia
893
Ocena
5
P
PrintablesFC2M3D

Mother's Day Rose - Rosa Dia da Mãe - Rosa Día de la Madre (Remix)

Perfect gift for Mother's Day Presente perfeito para Dia da Mãe Regalo perfecto para el Día de la Madre If you like my work consider Buy me a coffee 😊

Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu

Pobrania
2908
Polubienia
266
Ocena
5
P
PrintablesExtrutim

Thermometer / Hygrometer Stand

A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the printbed. Click here for a smaller version of this stand! If you like check out my other designs too!

Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu

Pobrania
2837
Polubienia
605
Ocena
4,94

🗲 Thor's Hammer Mjolnir 2-piece screw together 60% scale 🗲

Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.

Wydruk około 3,60 €–4,39 € nettoWstępna wycena jednego wariantu

Pobrania
2182
Polubienia
403
Ocena
5
P
PrintablesCarletes359

Ethernet RJ45 repair fix with NO SUPPORTS

Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…

Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
2149
Polubienia
414
Ocena
4,53
P
PrintablesJoe

Super Mario Brothers

Super Mario Brothers I've added a thicker more rigid V2 model for free-standing use/display. If you're placing Mario & Luigi on a wall, you might want to use the V1 model to save some filament. Tip: The tab on the bottom is designed for…

Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu

Pobrania
2068
Polubienia
329
Ocena
4,87

Snap-in motherboard feet (standoffs) for desktop use

Modified version with snap-in friction fit. No screws or threading required. The fit is a little bit tight to make sure that the feet doesn´t come lose by accident. Update: The locking tabs were a bit too tight for modern motherboards…

Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu

Pobrania
2062
Polubienia
373
Ocena
4,8

Magic: The Gathering Counters / Chips UPDATED 5-3-2019 (Life, Mana, Abilities, Loyalty, Energy, Power, Toughness) MtG #MtGCounters

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are stackable counters…

Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu

Pobrania
1843
Polubienia
485
Ocena
4,89
P
Printablestm108

Ethernet RJ45 Repair

This is a repair clip for your broken Ethernetcable. You can easy print it. The clip makes it possible that the cable does not always slip out so easily when the clip is broken off at the top. To print: you can use PLA too Use supports

Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1813
Polubienia
275
Ocena
4,62
P
PrintablesLocalFiend

Northern Pike RC Airplane

Intermediate Level Forward Swept Wing RC Aircraft. Designed for PETG - will also print with PLA. Multi-Part Print, 700g of filament. Very Gentle stall characteristics, high stability, large speed envelope, and top speed with recommended…

Wydruk około 1,20 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1787
Polubienia
346
Ocena
5
P
PrintablesMike B

Card Shufflers for double-sleeved Magic The Gathering or It's A Wonderful World cards

Shuffles double-sleeved Magic The Gathering cards, or another variation that shuffles single-sleeved It's A Wonderful World cards. Instructions for Magic The Gathering Shuffler Printed in 3DPrintingCanada Canadian-Made PLA+ White, 0.4mm…

Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu

Pobrania
1681
Polubienia
275
Ocena
5
P
PrintablesRichard

Christmas Card Snap-Together Santa’s sleigh

This kitcard is designed in Fusion360. The model from fotos is printed on Prusa mini+ with nozzle 0,4mm. Material is Prusament PLA vanilla white. You can check the print file for more info but its easy and fast print. Please share your…

Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu

Pobrania
1679
Polubienia
322
Ocena
5
P
PrintablesCarter

Pi4B Flat Fan Case Noctua 40x10 5V/3.3V SnapTogether

Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…

Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu

Pobrania
1585
Polubienia
134
Ocena
4,92
P
PrintablesDIY Machines

Build a COLOUR E-INK DASHBOARD - Weather | Calendar | Photos | News...

Please consider pressing the like button above.⬆ and downloading the files. It really helps me out with these projects. Thank you. 😊 Hi, I’m Lewis and this is DIY Machines. The channel where I show you step-by-step how to make awesome…

Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu

Pobrania
1569
Polubienia
2337
Ocena
5
P
Printablesdaveh_dev

MMU Saturn V Rocket (snap-together)

This is a remix of RealAbsurdity's wonderful "Modular Snap-Fit Saturn V" rocket design from thingiverse, but I re-built it for printing on my Prusa MMU2S! The coloration is based on as many pictures of Apollo-era Saturn V as I could find,…

Wydruk około 17,40 €–21,27 € nettoWstępna wycena jednego wariantu

Pobrania
1404
Polubienia
230
Ocena
4,8
P
PrintablesPetra Ollender

Best mom keychain (Mother's Day gift)

Quick and easy to print. Print with 0,2mm layer and change colours at 3,2mm. Owl & baby owl keychain: link here

Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu

Pobrania
1342
Polubienia
112
Ocena
5
P
PrintablesExtrutim

Thermometer / Hygrometer Frame

A minimalistic stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. The bottom is labeled, pay attention to this when inserting the hygrometer. A larger version of this stand:…

Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu

Pobrania
1209
Polubienia
256
Ocena
4,94
P
Printablesrohde•labs

Yet Another Prusa Mini / MK2 / MK3 Knob

Remixed "MINI-knob" (Prusa Mini) and "LCD-knob" (Prusa MK2 / MK3) by PRUSA RESEARCH https://github.com/prusa3d/Original-Prusa-MINI and https://github.com/prusa3d/Original-Prusa-i3 This knob features a smaller form factor, knurled sides…

Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu

Pobrania
1191
Polubienia
141
Ocena
4,9
P
PrintablesSavageRodent

Leatherman Wave Holster - Delux

This is a Remix of Comfortable Leatherman Wave belt holster by WaveSupportApparatus. Mostly the changes are of a cosmetic nature i.e. I've tarted it up a bit by rounding some of the hard edges. I've also engraved the words " Leatherman…

Wydruk około 3,17 €–3,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1184
Polubienia
190
Ocena
4,93
P
PrintablesN3XT3D

Ground Screw for Automower (Husqvarna, Gardena and Other Brands)

Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…

Wydruk około 2,23 €–2,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1183
Polubienia
154
Ocena
5
P
PrintablesNieuniknione

Brother P-Touch TZ TZe label tape organizer

This is a modification: https://www.thingiverse.com/thing:5146836 The original was too tight and the cartridges did not fit. I printed 0.3 (because I wanted it fast), but 0.2 is better. Tape 6mm = Tape 9mm = Tape 12mm. PLEASE SEE MY OTHER…

Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu

Pobrania
1125
Polubienia
202
Ocena
4,84
P
PrintablesOleksii Moroz

Yet another fully parametric silica box

UPD v23: Fixed wall thinkness issue on top cover UPD v25: Fixed fillet fails to calculate for small “holes"; Fixed top/bot X axis pattern for large boxes (>50mm width) UPD v26: Fixed side wall holes number and offset calculation, now…

Wydruk około 2,56 €–3,13 € nettoWstępna wycena jednego wariantu

Pobrania
1118
Polubienia
150
Ocena
4,91
P
PrintablesactualSIZE

Transformers G1 Panther (Ravage) Microcassette

Updated the hole size and made the back feet more firm. Also named all components in the .3mf file to make things easier. This is the kind of toy I would fidget with when I was a kid. A little Transformers Micro-cassette. While it does…

Wydruk około 5,36 €–6,55 € nettoWstępna wycena jednego wariantu

Pobrania
1053
Polubienia
238
Ocena
5
P
PrintablesPrintosaurus

Skadis Thermometer / Hygrometer

Thanks Extrutim for the original design! I searched a nice place for the original stand and saw my skadis board... So I added two hooks and ventilation holes. As simple as that.

Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu

Pobrania
1040
Polubienia
258
Ocena
4,81
P
Printablesrbid

Yet Another Portable Photography Paper Backdrop Accesory

Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…

Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu

Pobrania
1007
Polubienia
209
Ocena
4,78
P
PrintablesIan Foulds

Mason Jar Mosquito Trap (other camping pests too)

To make the trap you just print the lid and fill the jar with sugar water and yeast. The fermentation will generate CO2 which attracts the mosquitos they fly in the cone and get trapped. Turns out it attracts other pests like bald faced…

Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu

Pobrania
899
Polubienia
457
Ocena
4,5
P
PrintablesThebigfoot

Thermo/Hygrometer holder for small digital thermo/hygrometer

Printed in PLA black to achieve a nice and strong print is printed facing down, textured and smooth beds are giving very differents finishes. Link to the thermohygrometer available on amazon:…

Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu

Pobrania
823
Polubienia
113
Ocena
4,89
P
PrintablesPatrik

Ethernet RJ45 repair with snap lock

An ethernet RJ45 repair clip with a working snap lock that locks the plug in the socket. Prints without supports added from the slicer thus it prints quicker and and uses less material. NOTE: Needs to be printed with 3 perimeters (3…

Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu

Pobrania
817
Polubienia
66
Ocena
4,83
P
PrintablesGeekMomProjects

Snap-Together Folding Dodecahedron Frame

This model prints flat, then folds into a dodecahedron frame. The inner sides snap together (as shown in the video below) to hold the shape without any additional connectors. Print in PETG (as PLA is not sturdy enough) at 0.2 mm layer…

Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
808
Polubienia
184
Ocena
4,94
P
Printablesvindolin

RJ45 Ethernet Cable Clip Repair - parametric

Quick fix for RJ45 plugs whose little clip broke off. Because there are so many variations of RJ45 plugs and every one needs a different version of this model, I uploaded a .STEP file and an editable Fusion 360 file where all the…

Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
796
Polubienia
96
Ocena
4,93
P
PrintablesZeyko

Brother Bear Totem

Original totem from the movie Brother Bear

Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu

Pobrania
788
Polubienia
94
Ocena
5
P
PrintablesArnoud Hubach

Starlink Ethernet Adapter Wall Mount

This wall mount is designed for the Starlink Ethernet Adapter. There is room for the cables to connect into both sides. Optimal design for 3D printing, made to be strong, durable, and reliable. The Starlink Ethernet Adapter fits tightly…

Wydruk około 2,84 €–3,47 € nettoWstępna wycena jednego wariantu

Pobrania
773
Polubienia
88
Ocena
5
P
PrintablesTony Borisov™

Low Poly Panther Statuette with a base

A great-looking statuette of a panther. Like this, the model looks finished and it's finally stable. You can print it quite big. (110mm). You can use organic supports. I recommend using a brim wide enough to catch the organic supports as…

Wydruk około 9,16 €–11,20 € nettoWstępna wycena jednego wariantu

Pobrania
706
Polubienia
190
Ocena
0
P
PrintablesMrLogston

Black Panther Mask - front only - no supports needed

Black Panther Mask - front only - no supports needed. *not large enough to be worn as a mask

Wydruk około 21,49 €–26,27 € nettoWstępna wycena jednego wariantu

Pobrania
700
Polubienia
78
Ocena
0
P
PrintablesIsItBrokenYet

Yet Another Fidget Infinity Cube Rounded - Smaller, Stronger and Tighter.

Printing Tips This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm. If the hinges are sticking an adjustable wrench can provide…

Wydruk około 3,63 €–4,44 € nettoWstępna wycena jednego wariantu

Pobrania
683
Polubienia
80
Ocena
5
P
PrintablesBodo

Stackable Insertbox - feet and variant overview (Sortimo/Bosch/Auer/others)

This page includes the overview for all stackable insertboxes - Insert boxes overview all related accessories - Accessories description for the insertboxes feet, which will fit all variants - Insertbox Feet description for the system -…

Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
674
Polubienia
156
Ocena
4,63
P
PrintablesJKM

Thermometer holder var. C

Thermometer holder for Prusa CoreOne / + / L printer for direct control of temperature and humidity in the chamber. The thermometer is readable even through the door. Insert the thermometer into the printed part. Use the nylon rivet left…

Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
639
Polubienia
14
Ocena
0
P
PrintablesFC2M3D

Mother Giraffe and Son Keychain

Easy to make Mother Giraffe and Son keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu

Pobrania
632
Polubienia
100
Ocena
5
P
Printablescmbarrs1

A weather tight box for extension cord connections.

A weather tight (not waterproof or dust tight) box for extension cord ends. Has basic locking tabs to keep the cover attached. Fits a medium duty US extension coord but can be scaled up if it needs to fit a larger plug. Due to its outside…

Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
611
Polubienia
108
Ocena
5
P
Printablesk.makesstuff

Chainmail 3D Printed Fabric ( snap together too)

This is a Chainmail/3D printed fabric design that can be printed interlocking or snap together. saw some of the other designs that were really cool but I couldn't figure out how to going them so I leveraged another design I had to make a…

Wydruk około 5,57 €–6,81 € nettoWstępna wycena jednego wariantu

Pobrania
600
Polubienia
122
Ocena
5
P
Printables3D KIMBA

Spool Wind Spinner: Another Way to Recycle a Filament Spool

Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…

Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu

Pobrania
589
Polubienia
294
Ocena
5
P
Printablespiegolf

Round Hydrometer/Thermometer Holder

Update 23/05/26: added mirrored version to fix battery hole issue Update 11/12/24: added cutout for battery cover to make replacing the battery easier, model now has built in supports that should be removed before assembly Print Settings:…

Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu

Pobrania
556
Polubienia
55
Ocena
5
P
Printablesarbornoctis

Fanatec CSL DD Smartphone Dashboard for Google Pixel 6a and other Phones

This is a dashboard mount for Fanatec's CSL DD wheel base along with a Google Pixel 6a. Feel free to tinker with the provided .ipt file (Autodesk Inventor or Fusion 360) or even send me your smartphone model and I'll gladly modify the…

Wydruk około 3,06 €–3,73 € nettoWstępna wycena jednego wariantu

Pobrania
513
Polubienia
59
Ocena
4,86
P
Printablesscubam@xx

Magnetic Hygrometer Thermometer mount for Enclosure or Filament DryBox

This mount is for a round hygrometer thermometer from EEEKit which is very easily available on Amazon. The assembly is very easy with 4 pieces of 8x3mm magnets. Two are clipped inside the mount and two are attached to the plexiglass…

Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
502
Polubienia
117
Ocena
4,92
P
PrintablesTechNerd

Norfolk Southern toy train (BRIO / IKEA compatible)

Norfolk Southern diesel locomotive toy train (BRIO / IKEA compatible). This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium toy…

Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu

Pobrania
488
Polubienia
148
Ocena
5
P
PrintablesLike_VL

HarryPotter Coaster Slytherin

A simple yet elegant and fast print Slytherin coaster for your hot or cold beverages. Enjoy!

Wydruk około 1,49 €–1,82 € nettoWstępna wycena jednego wariantu

Pobrania
468
Polubienia
69
Ocena
5
P
PrintablesLittle_Leo

Featherboard Bosch GTS 635-216

Rechen für den seitlichen Anschlag der Bosch GTS 635-216. Es können hierbei Werkstücke bis zu einer Höhe von 50 mm verarbeitet werden. Der Anschlag kann zusammen mit dem Featherboard und der Halterung im zusammengebauten Zustand unter der…

Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu

Pobrania
462
Polubienia
87
Ocena
5
P
PrintablesWithSebs

Eyecup Sony Camera for Sony A7RIV And other A7 models.

Viewfinder, Eyecup for camera model Sony A7R IV. Not sure if model will fit other versions of the Sony A7 series. When printing with PLA I used scaling of 101% in Cura.

Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu

Pobrania
431
Polubienia
48
Ocena
4,6
P
PrintablesSneaks

Two Piece Thread Together 100g Filament Spool

For over a year now, I've been signed up for Proto-Pasta's Endless Pastabilities which sends three 100g spools of Filaments every couple of months. I absolutely LOVE Proto-Pasta and look forward to getting these unique filament colors…

Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu

Pobrania
422
Polubienia
89
Ocena
5
P
PrintablesPatrik

Ethernet RJ45 repair with snap lock for sideways print

An ethernet RJ45 repair clip with a snap lock that locks the plug in the socket. This model is optimized for sideways print so that the snap lock prints with the layer lines to increase the strength. Use: 3 perimeters (walls) supports To…

Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu

Pobrania
381
Polubienia
28
Ocena
5
P
Printableshorrovac

Alfa Romeo 147 (and other contemporary) passenger airbag cover clips

Print in something that is not brittle, preferably with a brim. There are no supports required as the model features in-model supports itself (between the lowermost plate and the one above). Make sure to enable “detect thin walls” and…

Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
376
Polubienia
18
Ocena
0

Happy Father's Day Sign 2 Color

Color order Start with White (light), then Black (dark) Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it…

Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu

Pobrania
373
Polubienia
52
Ocena
4,86
P
PrintablesPeter Farell

Father and Son Nativity Scene

Father and Son Nativity Scene

Wydruk około 15,77 €–19,28 € nettoWstępna wycena jednego wariantu

Pobrania
353
Polubienia
73
Ocena
0
P
Printablesmattala

RJ45 Ethernet Rescue Clip

I was inspired by the many designs for RJ45 repair clips, but they all suffered the same issue - the retainer part was bulky, fragile and never fitted my oddball collection of cables. They also required supports. The cable tie method fits…

Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
337
Polubienia
53
Ocena
5
P
Printableszuberio

Ethernet Port Cover - Print Orientation & Hex Remix

Remixed the ethernet port cover to print in an orientation that makes it far less likely to break off within the port. This orientation also increases the part surface on the build plate - reducing the need for brims. Finally, I changed…

Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu

Pobrania
336
Polubienia
63
Ocena
5
P
PrintablesMartin P.

Harry Potter - Slytherin Wandschild

Filamnt changes: grey, gold, green, black

Wydruk około 5,28 €–6,46 € nettoWstępna wycena jednego wariantu

Pobrania
303
Polubienia
68
Ocena
4,75
P
PrintablesFlo

Protective jaws / soft jaw for vice (parametric in FreeCAD) prism for HEUER FRONT 140 and others

The gcode fits for HEUER FRONT 140 with replaceable jaws. With the FreeCAD file (.FCStd) you can easy customize the protective jaws for many other vices. In particular, round or oval workpieces can be securely clamped and worked.

Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu

Pobrania
300
Polubienia
43
Ocena
5
P

Funny dinosaur brothers

Funny dinosaur brothers. Guys, don't print just yet! I found problems and will fix them. I will release a corrected version later. Thanks for understanding!

Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu

Pobrania
300
Polubienia
57
Ocena
5
P
PrintablesMS_D3sign

BEST DAD: Puffy Bubble Keychain (Father's Day Special)

🛠 Materials & Hardware: 🧵 PLA Filament (Multiple Colors) ➡ PLA Green -> [ https://amzn.to/48kWvNJ ] 🧶 TPU Filament (Flexible) ➡ OVERTURE GREEN -> [ https://amzn.to/49bm6sS ] 🔑 Keyring Split Rings (25mm) ➡ [ https://amzn.to/41RZ3zh ]…

Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu

Pobrania
279
Polubienia
38
Ocena
0
P
PrintablesLubosH

Leather splitting, edge chamfer, cutting tool or just scrapper for utility knife

I am using this tool for leather working. When I need to make leather thinner or chamfer the edges and it is very use full as well for cutting instead of the crescent knife. It hase big advantage - it is using Martor utility trapezoid…

Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu

Pobrania
277
Polubienia
60
Ocena
0
P
PrintablesRicardocab

Tamiya Weathering Master Set

A station that holds a complete set of Tamiya weathering Masters, four bottles of Tamiya panel accent and some brushes

Wydruk około 18,17 €–22,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
273
Polubienia
58
Ocena
5
P
PrintablesPcManny

Walther GSP Korn

Walther GSP Front sight with aiming aid. Walther GSP Korn mit Zielhilfe.

Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu

Pobrania
266
Polubienia
9
Ocena
0
P
PrintablesJLTX

Easy MMU3 Purge Calibration Tool for MK4 and other Nextruder models

This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…

Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu

Pobrania
258
Polubienia
98
Ocena
5
P
PrintablesTimeOut@Home

Another Dice Tower v2 Compilation

I first ran across “Yet Another Dice Tower v2” years ago and printed many copies for myself and friends. Since then I have lost the files and it appears that the original model is no longer available. There are many derivatives of the…

Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu

Pobrania
258
Polubienia
61
Ocena
4,5
P
Printablese645824

Orrery with editable month text and color-coded earth and other parts

This model is based on the excellent model from M4NU and also includes the mixes from Mhm5 and GuidoVermicelli. See the Differences section for what I added in my mix. Edit the month text in the OpenSCAD file. When the resulting STL is…

Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu

Pobrania
258
Polubienia
45
Ocena
4,5
P
Printableschixxi

Netatmo Thermostat - Danfoss RA-N Adapter

Description The original Danfoss RA-N Adapter which come in the box which each Smart Netatmo Radiator Thermostat is complete crap. It does not fit properly, does not keep the thermostat in place reliably and the thread keeps failing. This…

Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
245
Polubienia
22
Ocena
0
P
PrintablesHeikit

Remix of Buddy3D Buddy 3D Camera Mount Holder Prusa MK4/MK4s and other Aluminum Alu Profiles

Remix of Buddy3D Buddy 3D Camera Mount Prusa MK4/MK4s and other Aluminum Alu Profiles

Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
241
Polubienia
45
Ocena
4,67
P
PrintablesDazus K

Another Kaleidoscope Easter Egg 2025

This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed, quality and time, but not strength. If you want these to be rugged, use 2 perimeters and 15% infill…

Wydruk około 3,32 €–4,05 € nettoWstępna wycena jednego wariantu

Pobrania
238
Polubienia
68
Ocena
5

Low Poly Panther Figure

originally by @Stigern

Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu

Pobrania
236
Polubienia
16
Ocena
5
P
Printablesjogo

YAPL = Yet Another PRUSA Light

These unobtrusive LED bars shine light at the print from both sides, for great visibility even on the first layer. Easy wiring and installation with commonly available parts. Design features: The light shines from opposing sides, to…

Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu

Pobrania
230
Polubienia
32
Ocena
4,88
P
PrintablesGarlicGnome

Danfoss Adapter Homematic Thermostat

Danfoss Adapter Print: Material: PETG or PLA Layer: 0,2 mm Brim: 5mm Finnishing: Cut the Ring open at on of the Notches with a Saw. Afterwards you can Fit it onto the Valve. At last Screw on the Homematic Thermostat

Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu

Pobrania
224
Polubienia
12
Ocena
5
P
PrintablesAinon3Dtisk

Airsoft Grenade Launcher for Mp5 and others

Hello, I have an Airsoft Grenade Launcher for Mp5 and others for you. The grenade launcher is specially designed for Mp5 to look like from Half Life 1 or Black Messa . The grenade launcher is fully functional for Airsoft grenades. It is…

Wydruk około 16,55 €–20,23 € nettoWstępna wycena jednego wariantu

Pobrania
221
Polubienia
60
Ocena
0
P
PrintablesDominik

Moes Zigbee Thermostat (TRV) Adapter

Update 10.08.2023: Updated version with tooth which are more stable than the original one. Have you ever had the issue that the thermostat adapter was broken? Yes, it happens quite often. Therefore I created a model which can be used to…

Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
220
Polubienia
19
Ocena
5
P
PrintablesDaHouzKat

Original Prusa Enclosure Left Filament Guide and Adjustable Thermometer Bracket Combo

Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu

Pobrania
208
Polubienia
72
Ocena
5
P
PrintablesMOCmaniac

Caliper Depth Base Attachment (Mitutoyo and others)

This design is based on the original product (reference 050083-10 ) and is specifically made to fit the 500 series Mitutoyo calipers. It is also compatible with calipers that have a 16x3.5mm blade. The model is designed to fit neatly…

Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu

Pobrania
206
Polubienia
46
Ocena
5
P
PrintablesBaloo 3D

Gray Brother (Wolf pup) Scout woggle neckerchief scarfring - Canuto o pasa pañuelo de lobato

Check out this Scout woggle featuring Gray Brother, the wolf from the Jungle and Mowgli's best friend. Enjoy this cute wolf puppy caracter! It's the perfect choice for awarding to a Cub Scout named after a character from Rudyard Kipling's…

Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu

Pobrania
199
Polubienia
18
Ocena
0
P
PrintablesArc Studio

Eagle feather bookmark

A nice gift for your loved ones and yourself. A simple bookmark for book readers. Don't forget to reduce the Z scale when you change the scale. Make sure the Z scale is 1mm. You can print in different colors. You can use any filament you…

Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu

Pobrania
199
Polubienia
41
Ocena
0
P
PrintablesBurnsie

Leatherman Bit Holder

I combined the two bit holders made by Leatherman into one single piece that fits behind the tool in the pouch. The bits slide in and out ok, but the tolerances are tight enough so they don't fall out too easily. Some might need a good…

Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
197
Polubienia
28
Ocena
5
P
PrintablesLGworkshop

Featherweight Bobbin Tray

Stackable, holds 16 Featherweight bobbins measuring 7.5x22mm, fits inside Model 68 cabinet

Wydruk około 4,38 €–5,36 € nettoWstępna wycena jednego wariantu

Pobrania
189
Polubienia
19
Ocena
0
P
Printablesskivvie

TV-B-Gone Kit Snap Together Case, AA version

Easy to print, snap together case for the TV-B-Gone kit ( https://www.tvbgone.com/shop/tv-b-gone-kit-universal-build-tv-b-gone-kit/ ). This fits mine perfectly, but I've also include the Fusion 360 file if you want to make tweaks (sorry…

Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu

Pobrania
174
Polubienia
9
Ocena
5
P

YAPLCDK - Yet Another Prusa LCD Knob (Spiky edition)

Bored of the stock knob from your original Prusa printer? This one is for you! A round, spiky knob that provides a better grip, and a concave part for easier pushing. Also plug & play. Use a small lever to remove the old one, snap in the…

Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu

Pobrania
168
Polubienia
6
Ocena
5
P
Printablesrafalr

Pistol Magnetic Holster - fits Glock and other brands

Model created to save some space in my safe. This is a magnetic pistol holder to fit any metal wall. It fits probably all common pistols, even with a light or optical sight installed. Print instruction: 0,2mm layer hight print without…

Wydruk około 11,38 €–13,91 € nettoWstępna wycena jednego wariantu

Pobrania
168
Polubienia
24
Ocena
0
P
PrintablesPeter Farell

Motherless by George Lawson

Fixed and sculpted some details that got washed out during clean up. "Motherless by George Lawson" (https://skfb.ly/oJ7PE) by Vision Fountain is licensed under CC Attribution-NonCommercial-ShareAlike…

Wydruk około 18,43 €–22,53 € nettoWstępna wycena jednego wariantu

Pobrania
160
Polubienia
30
Ocena
0
P
PrintablesDark

Another filament clip

If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! Descpription: Another filament clip for 1,75 mm filament spool. It's more tight and fits on the most of the filament spools. You…

Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
160
Polubienia
20
Ocena
5

Auto accessories w/ Velcro | Securely transport cake, pizza and other precious cargo!

FEATURES Keep precious cargo from sliding and tumbling around in your trunk or car floor. Great for transporting cakes, pizzas, and other important packages. TIP: Use a color that stands out so they don't get lost in the depths of your…

Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu

Pobrania
152
Polubienia
122
Ocena
0
P
PrintablesDiastako

Lemons (and other fruits) collector, picker

Tool to be fixed on a pole with Vileda type thread which allow you to collect lemons (and other fruits) from quite height trees. Quite a long time print, but if you have a lemon (or other similar) tree in your backyard it will facilitate…

Wydruk około 17,47 €–21,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
149
Polubienia
18
Ocena
4,5
P
Printablesscrypt

Ethernet Cable Comb (Cat5e)

After lots of versions, I think I have made a nice cable dresser. Designed for Cat 5, may need to be slightly scaled up for Cat 6 and beyond. Directions (if you really need them) Print two at a high infill for strength. Put them together…

Wydruk około 4,29 €–5,25 € nettoWstępna wycena jednego wariantu

Pobrania
146
Polubienia
19
Ocena
4
P
Printablesron

Charging station - Wall mount - Phone , Tablet , other devices

Maturity: Very good. 8 prototypes. In use since 2024/04. Personally I fixed my charger with some double-sided tape inside the charging station. Accept charger with the sizes: Up to 150x30mm Up to 75x40mm Slot space is 21mm. Printing…

Wydruk około 27,74 €–33,90 € nettoWstępna wycena jednego wariantu

Pobrania
145
Polubienia
34
Ocena
5
P
PrintablesLean 3D

Brother's P-Touch TZe label printer tape organizer

Height: 20 mm 6 bays for standing: 16.5 x 4 - 28.2 x 2 6 bays for laying: 16.5 x 4 - 28.2 x 2 5 bays for standing: 16.4 x 3, 22.4 x 1, 28,4 x 1 6 bays for laying: 16.4 x 3, 22.4 x 1, 28.4 x 2 Which tape size fits which bay: 16.4: 6 mm, 9…

Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu

Pobrania
143
Polubienia
25
Ocena
5