669 modeli
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,93 €–3,59 € nettoWstępna wycena jednego wariantu
I recommend printing V2: https://www.printables.com/model/376143-squeeze-wallet-v2-for-up-to-9-cards Improvements in V2 are: improved design for longer life cycle 50% thicker walls wallet is now not stressed while holding the cards little…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena jednego wariantu
This only contains the G-Code for printing on a Prusa Mini/Mini+ Added true multi-colour to the model, so that the bottom portion with the text prints completely flat without debossed text and uses a separate colour for the text on the…
Wydruk około 1,01 €–1,24 € nettoWstępna wycena jednego wariantu
Draft Resurrection of a scan I believe from like 4 years ago. It was in my drafts unlabeled. And whats up with the poly count in the skirt.
Wydruk około 3,72 €–4,54 € nettoWstępna wycena jednego wariantu
This fan runs on dual 18650 batteries. The necked down nozzle design increases air velocity for optimal cooling. Bill of materials: Bottom cap contact spring: https://a.co/d/hnrPVWE Sliding Switch: https://a.co/d/9z3JiiK Spring contacts:…
Wydruk około 4,53 €–5,54 € nettoWstępna wycena jednego wariantu
Requires: 1x Wrench or tool of your choosing 1x Screw This! screws: https://www.printables.com/model/522789-screw-this-hsw-screw 1x Screw This! single inserts: https://www.printables.com/model/522781-screw-this-single-insert
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
So why is this supposed to be a tool? You can't do anything with it or can you? You can. Imagine this: A: “Have you repaired the lawn mower?” B: “No, I haven't got around to it.” A: “You haven't got a round TUIT you say?” B: “Yeah.” A:…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
I made a 1mm thick frontplate, witch you can just stick to the original front plate by just loosing the screws, fix the plate and screw the screws back on. Print instructions Just make sure you print white and orange text before black…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
i made this big nozzle it is a fidget nozzle it is fun to play with.
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
print in 25% infill paint on supports like so
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Do not print with Beskar fiber filament. It is far too heavy for the Nextruder to handle. Instead use something very light yet somewhat flexible. This print is with some cheap 8% Carbon filled PLA I got Amazon for about $30/kg and it fits…
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
This was inspired by this article (repeated 21 times since 2014) from “the Onion”: https://www.theonion.com/no-way-to-prevent-this-says-only-nation-where-this-r-1848971668
Wydruk około 3,00 €–3,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
100x160mm sign, with an owl asking an almost always pertinent question. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see…
Wydruk około 1,53 €–1,88 € nettoWstępna wycena jednego wariantu
100x160mm sign, reading “Bless this Mess”. Not an uncommon request, somehow. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
Overview File this under the "yet another" category, but yes, I wanted to model one too. I have a bunch of media and dongles and wanted a nice rectangular "plot" to arrange them on. Though this isn't a remix, this was definitely inspired…
I work in the tech industry and this meme/comic, much like everyone else, has become a visual representation of the chaos we are subjected to on the daily. I had sought out to make something special for my coworkers and decided I would…
It doesn’t print fast. It uses too much filament. It takes up a lot of space. It does a barely passable job holding pens. But it’s swirly and you love it, don’t you? Yeah… I know what you like. Go ahead, I know you’re gonna print it.…
Prints easy without support. I recommend to print the wallmount and hook as oriented in the .stl with no infill and 4 to 5 perimeter, because that way you get the most stable print. The amount of books you can hold with this wallmount is…
Notice that if you notice this notice, you will notice that it's not worth the notice
When designing a 3D object, it is good practice to first model the object you are designing around. The most recent Prusa Flash Contest is focused on Sharpie Mods , and I have seen many entries that only rely on a simple radius to…
A remix of the sign by wedgeworks , but with support for optional screw mounting, and a redesigned look. The sign is best printed with mmu3, but it's possible with a layer change at the start of the text, the only downside being that…
Even though I have a MMU2 I didn't want to bother with it, so I split up all the parts (or remodeled) to be printable by themselves. And then assembled by simply gluing them together. Everything has been split up, except the “this is…
Protect your galactic credits the Mandalorian way! This 3D printed piggy bank captures the iconic spirit of The Mandalorian - a fun, easy-to-print project for Star Wars fans of all ages. 🛡 Designed for FDM printers, prints easily with…
A nostalgic papercraft classic brought to life in 3D! This adorable "I Love You This Much" card features a cute character with arms that fold out to show just how much you care. What makes this special: The design prints flat in three…
This wall sign designed to be printed using multiple colors and changing them during the print.
I wanted the flexibility to move and organize this around the elegant HEX wall and now you can with the single HEX insert!
Just good clean fun.
I wanted the flexibility to move and organize this around the elegant HEX wall and now you can with the Screw This Screw! I've also added the “Screw This” Threads which can adapt to anything you'd like such as hooks and other holders that…
This is a remix with a different Jesus fish design. Show Jesus some love with this really awesome hoodie bead.
📚✨ Books Read This Year Counter Track your yearly reading goals in style with this bookish counter! Designed to sit beautifully on your shelf (or hang up if you prefer), this piece lets you update your reading progress with simple…
https://www.buymeacoffee.com/maxt ---------------------- Size it up/down as you wish - make it small, medium, or go large! Use it with or without a saucer - it all depends on your usage. No matter what, I suggest adding some felt pads to…
Appropriate safety sign for any machine, drill, lathe, saw and even AI chat bots. To print, do two color changes: first at the end of the base white plate second at the last layer of the “Danger” zone. Example in PrusaSlicer:
🖤 Cute black-and-white design 💕 Pink ears and nose 🐾 Sweet little paws and curled tail 🏡 Perfect for a desk, shelf or decoration 🎁 A lovely gift for cat lovers 🖨 Fun to print in different colors! Bring this little kitty home and add some…
I was able to successfully test print this model on first try with no infill, no supports, no brim; however if you're not sure about your bed adhesion, a brim may be advisable (infill or supports are still not necessary).
Another comedy "Do Not Touch" warning sign, multi-colour print, printed in ZIRO PLA Glitter Twinkling Red, ZIRO PLA Twinkling Black, and Sunlu Matte white PLA. For more funny signs see my (growing) collection of them here -…
This model was created in DesignSpark, it's my first time using the program, so I'm very pleased with how this turned out, and with Tears Of The Kingdom coming out on the 22nd, the timing seems very appropriate. I printed this on a Bambu…
This is a remix of Erin Fezell's version found here: https://www.printables.com/model/431372-this-is-fine-dog-remix?fbclid=IwAR1SprFZkk6Dv4jZsrX4Ab441mqVA-o0FUJ5eKhY0Ivk81MdfXJbqH5z3RQ I really liked her version of the Dog, so that…
This is a remix; however, I do not know where I got the original model. Please advise and I will give credit as credit is due. This is a complete garage storage system with hooks of varying widths to store a very wide range of tools. The…
🙌 9/10 printers recommend printing this! Print instructions: be sure to use ironing, because this is not irony printing works for all filaments except Prusament ideal for filaments with real gold particles, definitely not for silver or…
Put this informative sign on the door to your workspace, or at your printer's door. It's designed to print easily without MMU/AMS with just one manual color change. Printing instructions: Layer height: 0.2 mm (important) Top surface/top…
Baby Groot (Don't Push This Button) have 5 types。 http://www.thingiverse.com/thing:2235975 http://www.thingiverse.com/thing:2235934 http://www.thingiverse.com/thing:2235910 http://www.thingiverse.com/thing:2235886…
Challenge: Print this fish or any other fish model from the Toucan Virtual Museum http://www.toucan.co.jp/3DCG/3ds/FishModelsE.html Document your strategy for preparing, printing and assembling the model and share photos and your stl…
Introducing the 3D-printed Soap Box, a versatile addition to your bathroom or travel essentials. This meticulously designed box features a hexagonal-patterned soap holder plate, ensuring your soap stays dry and lasts longer. Say goodbye…
If you want, you can help me with designing inserts by donating here: https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8 Hello, for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused…
Reposting of https://www.thingiverse.com/thing:3219077 since the files were removed from the site. The files were removed and were made as an Etsy listing for R5 onwards. It's not illegal to do so. CC-A-NC-SA allows me to redistribute the…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap Instructions: Start with Negro At layer #10 (0.92mm) swap to Galactic Gray At layer #16 (1.4mm) swap to Naranja At layer #19 (1.64mm) swap to Marron At…
WELCOME TO THE PARTY PALS!" I designed this X-Mas Tree Topper in tribute to one of the GREATEST Christmas movies of all time! Yes, DIE HARD is a Christmas movie!!! It's a super easy project. and yes, there may be some Nakatomi Towers out…
Funny sign - “WARNING no stupid people beyond this point”, printed in ZIRO PLA Glitter Twinkling Red, ZIRO PLA Twinkling Black, and Sunlu Matte white PLA. Remixed to make it a flush design, as I wanted to print it face-down to get the…
For anyone who’s ever wanted their workshop, garage, or hallway to feel slightly more Spartan‑HR‑violation‑adjacent, this sign is your moment. Featuring a heroic kick, a dramatic fall, and the world’s least‑OSHA‑approved pit, this print…
My wife found a picture of a sign like this on Facebook and wanted me to design something similar. I printed her a sloth to go next to the blocks, but you can put anything there if you want. The shelf does require supports. Edit: I added…
A nostalgic papercraft classic brought to life in 3D! This adorable "I Miss You This Much" card features a cute character with arms that fold out to show just how much you care. What makes this special: The design prints flat in three…
100x160mm sign, with text: “Do Not Read This Sign” 2024-08-22: version with Braille text included per request Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode file. Also see the…
In this house we obey the laws of thermodynamics! Category: Signs & Logos
Floating Donut for Drinks 🍹 | Youtube Video ✨ Introducing our Floating Donut for Drinks —a fun and practical accessory for your poolside relaxation! Easy Print & Assembly 🛠 Print require no support , and assembly is a breeze thanks to the…
This is the way. Print instructions This is the way
Sign with the claim - WE DO THIS NOT BECAUSE IT IS EASY, BUT BECAUSE WE THOUGHT IT WOULD BE EASY. Multi Color printable. Print with 0,2 mm Layer hight. Change Colors at 0,8mm and 1,8mm Size overall 230x160x2 mm
Got my Prusa i3 2 months ago and love it. Was thinking while building it an allen key T handle would make sense. And a nut holder/driver. I may have got a bit carried away… The idea is to use the screw driver “ends” in your fingers or put…
Die of death figure from roblox. Stylized to my prefrence.
Removed the SD cards slots for more Micro's. Also Hexagons because they the best-agons. All credit to : Mateo Van Damme Print instructions Holder: I recommend printing the holder in PLA at 0.15mm layer height. With PETG there was a little…
Modification of original for: better angles of camera adjustments (on both sides) camera can be fixed in about 180 degrees Adapter itself: massive on both sides - this is IMPORTANT against other adapters - not to be broken during…
Reposting of https://www.thingiverse.com/thing:3876903 since the files were removed from the site. The files were removed and were made as an Etsy listing. It's not illegal to do so. CC-A-NC-SA allows me to redistribute the previous files…
This one was suggested by a Patreon member and really liked the idea. So I modified the existing "This is Fine" shadow box to appeal to us, crafty 3D printing people 😅 Any resemblance to a real 3D printer is purely coincidental 😉 I've…
Turn anything into packout with these mounting cleats. Printed with PLA, works well in ABS too. Make and sell if you'd like, there's a good market for these. If you want them altered let me know and i'll see what I can do. Altered some…
An inset for This War of Mine, including Tales from the Ruined City and Days of the Siege. It's a tight fit, but with a little care stacking the tokens in the main trays, everything goes in nicely. Sleeved cards will fit the card boxes,…
Stand / organizer for This War of Mine character card and status tokens. Also has place for a color token and slots for bandage + medicine tokens for each character.
Knob for Potentiometer 3296 print with brim and disable detect thin layers.
The "This is Fine" meme stars a comic dog sipping coffee amidst chaos, epitomizing the absurdity of life. Flames surround him, symbolizing challenges we face, yet his nonchalant demeanor hilariously mirrors our own when confronted with…
A make of the limiters by qidi.
Notable Update: Found a rehosting of this file set on MeakerVI's google drive, will keep these files here though. Reposting of https://www.thingiverse.com/thing:2957944 since the files were removed from the site. The files were removed…
Use this to mark the number of books you have read! This has multicolor prints ready to be sliced and files that have not been colored. I hope you enjoy! Edit: added a stand (print 2) and a loopless version! enjoy!
Funny Sign - "I'm Awake... Please respect my privacy during this difficult time" Model is a multi-object file to make it easy to colour the text. (Select “Xray” view in the 3d viewer to see the text on the multi-object file) Smoothest…
With the Return of #WaveyWednesday I was playing with vase designs and, “this Happened” Print as you wish; If you have a large nozzle, print in Vase Mode If you have a small nozzle, print with zero top layers and zero infills and 2-3…
Baby Groot (Don't Push This Button) have 5 types。 http://www.thingiverse.com/thing:2235975 http://www.thingiverse.com/thing:2235934 http://www.thingiverse.com/thing:2235910 http://www.thingiverse.com/thing:2235886…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A chicken feeder. Designed to make your hens feel like they're (already) in heaven, or at least in broth. Meticulously designed based on Leonardo DaVinci's lost sketches, tested and approved by former NASA engineers. Give your chickens…
warning this 3d printer is nuclear powered_Extrusion 2/2/2 walls 100% infill 0.28layer Hight
This is a remix of the remix of the remix…. ;) I found it quite difficult to print, despite the instructions of Arthur. To make it easier for others, I decided to break up the model in easy to print parts. I divided the model in…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is a 6th iteration of my carabiners - this one with an action oriented…
Baby Groot (Don't Push This Button) have 5 types。 http://www.thingiverse.com/thing:2235975 http://www.thingiverse.com/thing:2235934 http://www.thingiverse.com/thing:2235910 http://www.thingiverse.com/thing:2235886…
Remix of https://www.printables.com/model/522940-screw-this-wall-multimeter to fit my Habotest multimeter. Interior dimensions: ~87mm x ~42mm. Print with standard settings. Print: 1x WallMultimeter BIG 2x Insert Single 2x Screw This!…
Baby Groot (Don't Push This Button) have 5 types。 http://www.thingiverse.com/thing:2235975 http://www.thingiverse.com/thing:2235934 http://www.thingiverse.com/thing:2235910 http://www.thingiverse.com/thing:2235886…
Flaming dumpster fire and This is Fine Dog. I designed it thanks to the suggestions on Reddit (r/3Dprinting) The dumpster lids open on hinges and it can be used as a stationary organiser/poop chute bin/desktop ornament/etc! Put an…
I created this model for my son's room quite easy to print or laser cut
This is a design of a mounting plate for a 200 mm x 200 mm Noctua NF-A20 Fan. I used it to build a ventilated 3D-Printer cabinet. The mounting plate was printed on a Bambulab P1S with the 0.2 mm standard profile settings and a 0.4 mm…
This is a remix of the Little Tikes Turtle Sandbox with the cover art for Bring Me the Horizon's album, "Sempiternal" I reference this meme every time someone posts the original Little Tikes Turtle Sandbox, so I figured I'd make the…
A statue of Sithis, the patron of the Dark Brotherhood from the Elder Scrolls series. Can be hollowed but the arms all need supporting.
Simple and clean character folder for This War of Mine - only for cards WITHOUT sleeves. It has no space for color token, so print it in blue, green, yellow and orange color.
Funny Sign - "this whole 'KILLING them with KINDNESS' is taking way longer than expected", multi colour print, printed in ZIRO PLA Diamond Blue and Sunlu Matte white PLA. For more funny signs see my (growing) collection of them here -…
This is a set of four stencils with a bird motif. In one of the two variants, they also have added holes for hanging. In the model of a pair of birds, each of them have got has an extra wing. You can choose which wing to use when drawing.…
Do you have a foot fetish? Are you an enthusiast of anatomy? Do you enjoy unoptimized meshes? If any of those reasons resonate with you then this is the model for you. A model of the bones in your foot. All the models in this collection…
Update 10/04/2024 9:30 GMT+3: Front panel needs to be redisgned due to slight size difference between phsyical optics. Please hold. Update 01/04/2024 17:30 GMT+3: The RealSense holder is very difficult to be inserted into front panel and…
A comical, yet serious sign that is sure to fit in with any 3d printing setup. A 3mf file with color changes is provided, and NO MMU IS REQUIRED! Wanna use it for a different machine? (cnc, router, mill, lathe, etc…) Make your own remix…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Bookshelf or wall hanging cube style "books read this year" counter. Great for multiple color printers. This model is printed at 75% scale of the download file. Four differing cubes are required to achieve all the numerical values between…
