1768 modeli
Knurled Modular Threaded Stackable Container. 100mm outside diameter. 20mm, 40mm, & 60mm side wall height containers (with bottom) and expanders (without bottom). Top and bottom can be used to make a 40mm tall container. 3mm walls. Print…
Wydruk około 8,19 €–10,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a cute fat hamster with some space inside! Use it as a gift box or hide your favourite candy inside :) Print in place, no supports. You can print both parts at once. Scaling: Don’t forget to scale both parts equally. There is enough…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Digital File to DIY 3D print ER20 threaded (25x1.5 mm) Chip Fan. The chip fan produce at lot of air movement so it is recommanded to use it with a strong vacuum capacity dust boot. Use at your own risk (mine is working fine). STL, 3MF and…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
Design can be modified inside OnShape completely by using Variables. Link to OnShape…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
M4, M5, M6 T-Nut Assortment for following Alu Profiles: - Rose und Krieger - Item - Flexlink - Bosch / Rexroth - Minitec Thread is included. Can be printed with 0.15mm Layerheight. OnShape Links: Bosch/Rexroth…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Introducing the Telescopic Table with Threaded Security: a compact and portable stand designed for maximum stability and convenience. This innovative table features telescopic legs that can be adjusted to three heights: 180mm, 315mm, and…
Wydruk około 4,56 €–5,58 € nettoWstępna wycena jednego wariantu
For geocaching, the original textured screw cap container works great, provided you either hide it well or add a loop for hanging it up. But it is a bit small. So to add a little more room for note paper and a less stubby pencil, this…
Wydruk około 4,70 €–5,75 € nettoWstępna wycena jednego wariantu
Threaded box with shape and size of 30mm round for Avenger
Wydruk około 1,18 €–1,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to lock and seal around a 12mm diameter by 8mm (max) deep hole while passing though a 4mm diameter (eg. USB) cable. I use this to power my dry box's wifi connected hygrometer.
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
I ordered some cable glands online and did not notice that they would not come with nuts to actually mount them in my distribution box. I therefore quickly made this model. I printed them in Prusament PLA with a layer height of 0.1 mm and…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
Its just a replacement for a broken microphone mount. As it is, is easy to print in PLA or PETG. Suitable for FIFINE microphones . Additional hardware may be needed. In fact, you should keep the original threaded nut that can be extracted…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Mount select TP-Link camera models on a standard quarter-inch thread using the existing twist-lock base. This is a copy of the existing twist-lock mount, but with threads for mounting on a tripod or similar, if you don't want to drill…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this to hold my threaded insert tip set. It's stackable when filled, and the bits are arranged in size order (I've given a bit more space for the larger bits). They are arranged clockwise in increasing size from the bottom right.…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Digital File to DIY 3D print ER20 threaded (M25x1.5 mm) Chip Fan. The chip fan produce at lot of air movement so it is recommanded to use it with a small or regular vacuum capacity dust boot. Use at your own risk (mine is working fine).…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu
Universal Stackable Threaded Container You can make different sizes and stack as needed. You can make an organizer for screws or perhaps a medicine dispenser. You can mark the boxes with any text directly in the slicer.
Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter, to use a pole with cone threaded connector (as e.g. the Vileda ones) with the M24 connection mops, commonly used in Greece. It is a combination of the “ Vileda Mop rod, Coned Thread Connector” designed by Skaran (…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the part of the IKEA OMAR shelving foot that slides over the pole. It is useful for attaching threaded castors. Two versions are available. One with an M8 1.0 thread (same as the original part) and another with an M10 1.5 thread…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Aufbewahrungsbox für Ruthex Aufsätze zum Gewindeeinschmelzen M2-M8. Verschluß mit 4 Magnete Durchmesser 5mm x 1.7mm. Storage box for Ruthex attachments for thread melting M2-M8. Closure with 4 magnets diameter 5mm x 1.7mm.
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
Will likely work with more DeWalt miter saws than the DWS779 I have, but YMMV. PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household…
Wydruk około 3,23 €–3,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Threaded Cable Grommet for the E27 fitting Appropriate for round or flat flexible cables, configured by default for European E27 fittings with a M10x1 thread. The default stl exports will fit a generic flat 2x0.75 mm2 cable. You can…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed using ePLA. use support as in the attached bgcode or use your own.
Wydruk około 2,92 €–3,57 € nettoWstępna wycena jednego wariantu
Modern Easter bunny decoration. This model stands at 6 cm tall and can be scaled up according to your preference. Its interior is hollow to conserve filament. If you have a textured plate, try to lower your Z offset. Wishing You a Happy…
Wydruk około 1,08 €–1,33 € nettoWstępna wycena jednego wariantu
Printed using ePLA. Support is required as already planned under the attached bgcode file, or use your own. Threads are NPT type.
Wydruk około 2,68 €–3,28 € nettoWstępna wycena jednego wariantu
Small OpenSCAD script to add magnet holes to Rabbit's excellent Gridfinity holder for a set of CNCKitchen's soldering iron tips for insetting threaded brass inserts . Note that I haven't added the M3 screw holes, mostly because I don't…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
This filament guide is a remix to add a threaded end for a bowden connector
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
I made this model to store a tool in the underseat of my Vespa, but it can hold any object smaller than 70x30 mm. Has been realized with a two principles thread in order to screw it more quickly.
Wydruk około 2,99 €–3,65 € nettoWstępna wycena jednego wariantu
I have a sump pump that I use to drain old nasty water out of the horse's drinking barrel. I bought 2 discharge hoses (1 1/4") and I needed a coupling to stick them together to reach a good drainage site. I was unable to find what I…
Wydruk około 2,12 €–2,60 € nettoWstępna wycena jednego wariantu
Modern Easter bunny decoration. This model stands at 6 cm tall and can be scaled up according to your preference. Its interior is hollow to conserve filament. If you have a textured plate, try to lower your Z offset. Wishing You a Happy…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
Link to OnShape File: https://cad.onshape.com/documents/afb04c38888d2f24030fa2b0/w/db59c6191caa506fa9606c84/e/370f2c13311ec529d134f12b
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
A Gridfinity tool holder for five melting aids for threaded inserts. Mine were made by Turmberg3D, I ordered them from Amazon. Note: The outer diameter of the melting aids is 6.0 mm, and they fit quite well, I think. ----- Eine Gridfinity…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Here's an improvement of my other shaker model that I have. Threaded caps and also a pillar in base to agitate salt and pepper and hopefully prevent clumping. Primer just pops in, tapered end in first. Also have a case with no primer…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
The Deity PR-2 only comes with a belt clip to hold it. I guess you can attach the belt clip to a cold shoe but I wanted to be able to directly screw in stuff to the PR-2. I decided to add 3 thread holes so you can either mount to a tripod…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
dapter for the dual-spoke steering wheel from the Škoda Felicia , converting the original spline hub into a mount for an M10 threaded rod . Fits into the original ~25 mm spline hub of the wheel and creates a through-hole for an M10…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a large threaded egg. It was designed to be large enough to hold one of McGybeer's articulated dragons (printed at the default size). Looks particularly good in multicolor coextruded filaments. It will print OK without supports,…
Generate your own nuts, bolts, washers and threaded rod by simply typing the required parameters into OpenSCAD. Great for replacing metal equivalents in many applications. Includes options to generate nuts, bolts, washers and WingNuts for…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Filament Guide Sled and Filament Guide” for an amazing project " Filament Spool Switcher & Winder "…
Made for Schrader type valve. (the most common type) Fits mountain bikes, road bikes, cars and motorcycles. 0.15mm tolerance on the default model and 0.05mm on the tight version Optimized for 0.12mm layer height. Please, share your…
Use the Skadis T-nut to mount different accessories to the IKEA Skådis board. The accessory will be firmly attached to the board and will not come loose when used, as can happen with conventional hooks. Is the threaded T-nut strong…
This model was missing from Printable so I upload with credit to the original creator under Creative Commons.
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I needed a hollow, two-part,…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
🎯 Recommended Print Settings For Best Results Print this design with a standard 0.4mm nozzle at 0.24mm layer height for that sweet spot between speed and detail. We're keeping it lightweight with just 8-15% infill, which gives plenty of…
Get the CAD and STL models of our inserts, to use them in your designs! Purchase original CNC Kitchen Inserts in our store CNCKitchen.STORE , at Prusa, or at a ton of resellers ! Get suitable soldering iron tips at CNCKitchen.STORE , at…
Anchor that screws into drywall, with internal thread for 8-32 bolt. Simply drill a ¼" hole in your drywall and turn the anchor in with a Phillip's screwdriver until the end is flush with the drywall. The threads in the center hole accept…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . By request, here is a solid,…
Use case a cream jar for hand cream I have printed a whole bunch of these cute little threaded containers (Also because they are a great benchmark to check if your printer has a clean and even extrusion, which is apparently not always the…
A small jar to store some goods. There are jars with width 30mm and 60mm. The 30mm the have hights 15, 20 and 25mm. The 60mm width jars come in 20, 30 and 40mm height. After printing you should screw the jar and lid back and forth and…
I've modeled this container in blender. It actually threads surprisingly well. (water tight) Print Settings Supports: No Resolution: 0.2mm Infill: 20% Filament: Spectrum PLA Blue lagoon Notes: Printed with 50% original scale.…
I've applied harvdog92's threads from his threaded remix of Lalala65765's Dragon Egg box Chi to the Dragon Egg box Mi . I also added a chamfer to the inside lip to allow for printing without supports. Print both parts right side up, in…
Category Part Quantity Fixings M5 Nut 6 Fixings M5 Washers 10 Fixings M3 x 10 CHS 10 Fixings M3 x 20 CHS 2 Fixings M3 Washer (optional) 8 Fixings M3 Nut 10 Fixings M3 x 8 CHS 1 Fixings M5 x 30 BHS 6 Fixings M5 x 8 BHS 10 Fixings M5 T Slot…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
Remixed to thin the walls for printing large. The threads remain the same. The wall thickness at its thinnest is approximately 1.5mm. The part measures 253x253mm XY, 198mm and 189mm Z. This is approximately 540% scale from the original.
This is an improved version of harvdog92's threaded remix of Lalala65765's Dragon Egg box Chi . I've added a chamfer to the inside lip to allow for printing without supports. Print both parts right side up, in other words, the bottom…
I've worked on two editions of remix of the excellent push block design by Trobinou (January 23, 2017). One of my remixes does not make use of threaded inserts, while the other (this one) does. (I have not yet posted the…
Prints perfectly on .2 layer height with PLA. Holes are perfect for keychain threaded inserts from amazon. I left these in here as negative modifiers so they can be adjusted based on your specific tolerances. You can probably get away…
Hollow Threaded Easter Egg with Voronoi texture
My own version of the lego wall hanger set, optimized for 3d printing without any supports
Mini Trashcan Keychain Little trashcan that can be used for storage, decoration, or as a keychain. Maybe handy to hang on your backpack or purse. The lid is threaded. Universal slicer settings: Material: PLA Nozzle: 0.4mm Layer Height:…
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. For building a filament dry…
Keep your cat fascinated with this design of a roll-around-and-chase cat toy that uses threading, allowing you to take the two halves apart and swap out treats or other objects inside. The two parts are designed so that they can be placed…
This a simple cylindrical jar with a threaded lid. I printed this out of PLA at a 0.25 layer height, but it should be fine out of any material . The inside bottom of the jar is rounded to prevent contents from getting stuck. The mating…
What is galling? galling noun : a type of wear caused by friction between metal surfaces, often leading to parts sticking or seizing. Example: "Galling can lead to a nut and bolt binding under high pressure." adjective : extremely…
I designed this Venturi pump to see if it'd work for fertigation in a drip system and it seems to work quite well. Though I still need to test its longevity. I printed one in PETG and one in PLA; both seem to work fine. I suggest using…
i made an adapte for a 1/2" inside to 3/4" outside Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print.
A handy case to hold your threaded inserts and installation tools. It's designed to fit the tools sold by CNC Kitchen and the labels match the sizes they sell. I printed in white and black ABS and it came out really nice. You'll need 6x…
There have been several threaded containers out there, but most of them have not provided the Fusion360 file to make changes. This model should be easy/intuitive to change. This model has custom round threads and has a constant inner…
I remixed this Fallout Fusion Core so that it's threaded and can store things. I will modify it further to hold a USB battery (5000m). Update: 7.9.18 - Added a shim ring at .5mm if your + and - signs don't line up. Print this and place on…
A replacement threaded end for a paint roller extension pole or broom, mop, or duster handle. This fits a hollow pipe with an inner diameter of approximately 0.8" / 20.4mm. The source is included if your pole diameter is different. It…
This is a board, with a bunch of threaded holes. There's also a screw. The screw threads into the board, as well as being able to thread into another screw's head. The threads are M15x1.5. This definitely isn't as nice as a much thicker,…
This is a cool little threaded Easter egg. It has threads so you can open it put toys or candy inside. It also prints without supports. This egg is the perfect size to hold a real egg inside. If you enjoy this model, please give it a…
Threaded wall board for organization its 180x180 the threads are 10mm x 1.5 iso metric that are 20mm apart c/c. hopefully we can get some good remixes going
I've needed screw on lids for bottles and jars several times since I started 3D printing, I've always created a one-off design each time. I've used my experience and knowledge about making lids along with my experience building robust…
A tube box with a cap. You can screw the cap on the box. Quite simple concept. In openscad, you can choose the size of the box. There are also some options: - adding grip on the cap; - adding holes on the bottom of the box and/or on the…
This is a remix of the Voron 2.4 Bowden retainer that features an M10 thread at the back for a fitting that retains your PTFE tube . It's designed so that the fitting can be screwed into the back, and the tube pushed all the way through…
This is an attempt at an Acme threaded C-Clamp. I do not know how well the overhang of the Acme threads will work. Updates v1 Acme thread printed perfectly at 0.25mm Deleted M12 version v2 is more like a real clamp including swivel pad…
Repair set for broken drying rack with M4 threaded inserts I saw the repair kit for the broken strings on a drying rack by STxS . I tried it and it fitted for my drying rack. This remix replaces the M4 nut holder with threaded inserts,…
Threaded insert press for heat setting threaded inserts. Press has a rack and pinion desing with three 12 or 8 mm rods and LM12LUU or LM8UU bearings, so you can precisely adjust height of insert and you get perfectly seated threads. The…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (Weller Style)! CNCKitchen.STORE…
Great for festivals and concerts to carry earbuds, keep your tokens safe or simply use as a portable ashtray. Excellent conversation starter. Height: 10cm / Diameter: 3cm If you’d like to support my work, leaving a ♡ like ♥ or even buying…
I made these models to route an air hose with a 50mm inner diameter . It can also be used with my CNC spindle dust shoe or with my vacuum nozzle . Part list hose-adapter-46mm-38mm.3mf Simple straight adapter. Both dimensions are outer…
Find other STLs in the original model If you' re searching for a case which fits a RPi and further electronics, please find this Model If you're using an 800mm x 800mm panel for mounting AND you're using the new feet which are mounted…
The vinyl caps that I have had for different SMA connector radio devices I have were always falling off. I made these with the correct ¼-36 thread so that they stay on and don't fall off. Print with thin layers for the best detail on the…
Dose mit Gewindedeckel. Durchmesser 80 mm
A Harlot barrel with 1/2-28 right hand threads. There is also a file for a ½-28 thread protector. The original designer worried about the weight of a muzzle device on the end of the barrel. Well fitting parts and a quality barrel latch…
Threaded oil funnel to fit most 250, 350 & 450 KTM / Husky / Gasgas motocross bikes. The funnel threads directly into your existing oil reservoir for easier oil refills. Air vent integrated into funnel to allow for fast pours with no…
Update 02/12/2021 I improved the model to be more robust and to be easier to customize. Thanks to the user nicktalavera for his ideas on this! Lid added! I also included a few prerendered STLs ready to be printed if you have an Ikea LACK…
Error 17536 relates to an issue with the Dwarf Board connector and the original design of the cable strain relief. The strain on the connector can cause the extruder motor to stop spinning and until a recent beta firmware (6.2-RC1) the…
A classic looking Easter egg, with a hollow cavity inside, and setup so that it can be printed without supports . The “ring” is designed so that it will thread securely onto the bottom half and more loosely to the top, allowing for easy…
Threaded insert M3 It's not as good as original metal one. But its a good option when you don't have metal inserts (and need it now!) or when you are going to shread your 3D printed prototype (and you don't want to pull it out) How to…
Easy and fast to print! No supports needed. Scale it up or down as you need. I printed it with 0,15 mm layer height (0,4 mm nozzle) and it came out fine. I didn’t need to use a brim, but if you have problems with bed adhesion, use it for…
This is just a simple 1 1/4" (31.75mm) diameter passthrough to get a cable through sheetrock. It just threads in after you drill out a slightly undersized hole. Drill a 1 in (25.4mm) or 1 1/8 in (28.5mm) hole. The threads are 1 1/4"…
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
Make sure you print fairly accurately. You don't need any support material anywhere. if you were to do this, it is possible that they will no longer fit together due to the small particles. I hope you learn a lot and have fun with these…
The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame There is no pictogram for threaded inserts as far as I know of, so I came up with this design. Print it…
I have several spare sockets, but unfortunately they are mostly without any rings that screw onto the socket. I have identified two types of threading that slightly differs. One has an outer diameter of 40.2 mm and a pitch of 2.4 mm. The…
Support my Work with a little Donation Changelog: 26.02.24 - Request from User(@ PfeifferCh ) added a newer Version with M2.5 , M6 and M8 This test print is designed for users to easily insert threaded inserts after 3D printing. The…
A little bigger than the original to accommodate a (1.1Kg) 22cm roll and Threaded Inserts. I made the design from scratch. I also changed the inserts from hexagonal to cylindrical with threads. This way rolling the paper should be…
