Wyniki wyszukiwania: thumbstick

Sortowanie

179 modeli

Playstation 5 Joystick/Thumbstick Extender (No Supports!) (PS5)

This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…

Pobrania
2386
Polubienia
136
Ocena
4,7
P
Printablesslug

Odin 2 Thumbstick Tops

Thumbstick Tops for Odin 2. Top is the same size as Joycon tops. All parts are meant to be friction fit, use glue at your own risk. 4 Thumbstick styles 1 Height Adjuster for use with stock top Printed on A1 Mini. The smaller the layer…

Pobrania
1414
Polubienia
45
Ocena
5
P
PrintablesQuatro

Legion go thumbsticks

Introducing custom 3D printed thumbsticks designed exclusively for the Legion Go handheld! Elevate your gaming experience with these meticulously crafted thumbsticks tailored to enhance comfort, control, and precision during gameplay.…

Pobrania
1369
Polubienia
52
Ocena
0
P
PrintablesEDnation

PS4 Controler Thumbstick replacement

DESIGN INTENTS Replacing thumbsticks that are damaged on PS4 controllers Design for 3D printing (and not a blind replica of the original) Overhangs and bridges have been adjusted to work on any calibrated 3D printer Stick is a little bit…

Pobrania
1249
Polubienia
137
Ocena
5
P
PrintablesSascha K

Thumbstick Cap for Dualshock 4 (PS4) and Dualsense (PS5) Controller

I recommend to print this standing on one surface at the Bottom like one of the pictures show. It might work best if the inner gap is facing upwards. I printed mine on an Ender 3 S1 with - Fillamentum Wizards Voodoo PLA - 210°C - 0,08mm…

Pobrania
894
Polubienia
50
Ocena
5
P
Printablesdonutsatwork

Asus ROG Ally - Thumbstick Covers/Locks

I made thumbstick covers/grips/locks, whatever you call them. There is an STL for one that works without thumb grips. And an STL for one that works WITH thumb grips. (I've personally tested this with Skull&Co thumbgrips and it seems to…

Pobrania
846
Polubienia
68
Ocena
4,5
P
Printablesx2brute

Nintendo Switch Joy-Con Thumbstick Cap

replacement for the rubber top of joy-con thumbsticks. based on the shape of Xbox sticks. Must be printed in TPU or other flexible material. I could probably make a version that needed glued on or tight tolerances to allow other materials…

Pobrania
705
Polubienia
53
Ocena
5
P
PrintablesSunbertyv

Thumbstick Grip ps4 / ps5

SCALE THE STL TO 98%, trust me This simple grip for your controller is simple and long-lasting, it takes a few minutes to make, it is a great ally if your thumbsticks are damaged or very old Print: Basic PLA 0.2mm resolution (lower for…

Pobrania
654
Polubienia
45
Ocena
0
P
PrintablesAsura23

PS5 DualSence Thumbstick

My first shared 3D model. I wanted some more accuracy playing Helldivers 2, so I tried several existing thumbsticks, that are available online, but didn't like them. So I ended up creating my own. Printed in standart PLA, top in different…

Pobrania
651
Polubienia
39
Ocena
5
P
Printablesdevlab

PS4 thumbsticks

This is a remix of thumbsticks for PS4. My son needed them to play Fortnite, and they seem to work well for him. The top parts of the thumbsticks are remixed from PS4 Thumbstick Mods by philbarrenger . Top parts have to be printed with…

Pobrania
648
Polubienia
83
Ocena
5
P
PrintablesAntro

XBOX controller Thumbstick

Thumbstick replacement Probably will work with other XBOX pads too I recommend to: use 0.25mm nozzle (to better reproduce the texture) or print with resin Update: additional champfered version requested by @ntnt

Pobrania
629
Polubienia
124
Ocena
5
P
PrintablesMaksym Dudkin

PS5 DualSense Thumbstick Joystick Extender for FPV Drone simulators

This is a no-glue no-supports removable joystick to hold between your index fingers and thumbs.

Pobrania
624
Polubienia
71
Ocena
5
P
PrintablesKatona Edvard

Xbox one controller thumbstick cap

The cap is proiected to be push to fit so you dont need to glue them on ,I suggest to print them with 0.005-0.1 layerheight to be smooth .

Pobrania
609
Polubienia
47
Ocena
5
P
PrintablesDallin Marshall

Retroid Pocket 5 Thumbstick

The Retroid Pocket 5 is an awesome retro handheld but I broke both thumb-sticks when traveling with the handheld in my sling. I tried printing the Odin 2/Retroid Pocket 5 Thumb Sticks but was not happy with the fit. I printed these…

Pobrania
590
Polubienia
37
Ocena
0
P
PrintablesDonnie

Xbox One thumbstick

Xbox One thumbstick

Pobrania
581
Polubienia
61
Ocena
5
P
Printablessomeoneonly

Replacement Xbox 360 Joystick/Thumbstick ( + extension)

These are replacement joysticks for xbox 360 controllers. The design is suited for 3D printers and not identical to the original. I have experimented with a few different designs trying to find the more grippy design that is easily…

Pobrania
528
Polubienia
44
Ocena
4,67
P
PrintablesGorroth 1007

Nintendo Switch Joy-Con replacement Thumbstick-Caps

I recently bought a used Nintendo Switch and realized, that the joy-con's thumbsticks weren't the best anymore. But 3d-printing to the rescure. I ripped off the original rubber from the thumbsticks, measured the plastic underneath and…

Pobrania
497
Polubienia
32
Ocena
4,75
P
Printablesrodderz6279

legion go thumbstick extender

printed using 0.4mm nozel with layer hight of 0.12mm

Pobrania
481
Polubienia
31
Ocena
0
P
PrintablesJoeRixon

DJI RC Motion 3 Thumbstick / Joystick Replacement

DJI RC Motion 3 Thumbstick / Joystick replacement because DJI seem to refuse to replace such a simple part. Installation: A simple press fit with a small dab of superglue just before you press the thumbstick in, just as the factory…

Pobrania
477
Polubienia
17
Ocena
0
P
PrintablesBlussyya

psp joystick/thumbstick

i couldnt find one thats good so i just mixed two models. psp analog-stick/joy-stick or whatever you call it replica, almost like the original, so if u want a replica download this print it vertically for the best texture use a 0.2mm…

Pobrania
450
Polubienia
23
Ocena
4,5
P
PrintablesLoboTheSequel

Xbox Thumbsticks

Xbox thumbstick extenders three heights 9.5mm, 14mm and 21mm. Both convex and concave versions.

Pobrania
423
Polubienia
36
Ocena
5
P
PrintablesJohnMartin

XBox Controller Thumbstick Pad

My 4 year old decided to rip off the stock thumbstick pads on my XBox One controller. I bought some aftermarket ones that didn't fit snug enough, and he did it again, losing them. So I made this and printed a dozen of them. I used…

Pobrania
406
Polubienia
59
Ocena
4,83
P
PrintablesVoyajer

Thumbstick adaptor for Original Xbox Duke, S controller, and 360 controller

This is a small spacer that allows you to adapt the Xbox One controller thumbsticks to older xbox controllers including the xbox 360 controller, the OG xbox S controller and even the Duke controller without restricting functionality (full…

Pobrania
384
Polubienia
57
Ocena
0
P
PrintablesAndres L

PS4 thumbstick for FPS

Riser for the joystick to have more leverage and length of movement increasing the aim in FPS (shooter) games It's better to increase the sensibility in your game after fitting the thumbstick I printed it with a mix of PLA and TPU for the…

Pobrania
378
Polubienia
28
Ocena
5

Xbox One Thumbstick

3D-printable replacement thumbstick for Xbox One controllers. Print Settings Printer Brand: Prusa Printer: Prusa Mini Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Prusament PLA Black Notes: May need to scale up by 25.4…

Pobrania
378
Polubienia
53
Ocena
2,5
P
PrintablesJ T

Odin 2 Thumbstick (resized for Switch thumb grips)

Printable replacement thumb sticks for Ayn Odin 2

Pobrania
359
Polubienia
12
Ocena
0
P
PrintablesMeneerHout

Xbox 360 Analog Thumbstick

I could not find the exact Xbox 360 controller analog thumb stick I wanted, so I created one myself. These are a little bit higher (2mm) than the standard thumbsticks as I preffer them that way. V2 of both files have a slightly thicker…

Pobrania
353
Polubienia
33
Ocena
3
P
PrintablesStefan

PS4 Controller Thumbstick replacement with flex cap

I really liked the original design by @EDnation, they worked perfectly. But they were a little tall for me, so I lowered the height of the head to match the originals and then added a cap that's supposed to be made from flex material. So…

Pobrania
345
Polubienia
42
Ocena
5
P
PrintablesDaniel Schultze

Xbox Controller Thumbstick protectors

Extremely simple grippers/protectors for Xbox controllers. Works on Xbox One and series x controllers. Haven't tested with PS controllers so can't guarantee the fitment. Print in TPU or similar flex filament. Print smoot or with fuzzy…

Pobrania
342
Polubienia
65
Ocena
3,5
P
PrintablesMartin C

PS5 DualSense Thumbstick Replacement Cap – Easy to Install

If your PS5 DualSense thumbstick cover is worn or torn, this replacement cap is an easy solution. It snaps securely onto the existing knob, restoring the functionality and feel without replacing the entire thumbstick. Print Details: Layer…

Pobrania
328
Polubienia
22
Ocena
4,5
P
PrintablesScatterthought

Razer Tartarus Thumbstick Grip

A simple mod for the Razer Tartarus keypad that provides a raised edge around the edges of the thumbpad for better grip.

Pobrania
316
Polubienia
30
Ocena
5
P
PrintablesMega Making

Xbox 360 Controller Thumbstick Grip/Cap

replacement thumbstick grip for xbox 360 controller Category: Toy & Game Accessories

Pobrania
315
Polubienia
33
Ocena
4,67
P
PrintablesXTB09X

XBOX accuracy thumbsticks

High accuracy thumb sticks improve game performance by 10% when playing various games

Pobrania
301
Polubienia
20
Ocena
1
P
PrintablesAlgol

Xbox One FPV Drone Thumbstick Extension

For best quality it is advised to print using a skirt/raft on the sticks as well as using 8 perimeter layers (yes really)

Pobrania
273
Polubienia
17
Ocena
5
P
PrintablesBlindside_o0

Thumbstick Extensions (Xbox One and Switch)

Have you ever had an issue with hitting those precise FPS shots in a game because of overshooting? One reason could be because the controller doesn't have a long enough stick. The longer the thumbstick, the higher the accuracy. The…

Pobrania
263
Polubienia
26
Ocena
5
P
Printablesluka ,

Dualsense (ps5) thumbstick

These are my 3d thumbsticks i designed for my dualsense for playing warzone 3. These were designed using the 3d scan of the dualsense found here: https://www.printables.com/model/407609-ps5-controller-scan

Pobrania
258
Polubienia
19
Ocena
0
P
PrintablesT-D-L

Xbox One Thumbstick Replacement Cover

After some particularily heavy gaming I noticed the stock rubber cover on my left thumbstick was coming off, so I designed an FDM friendly-ish replacement that snaps on to the thumbstick base, I included some sacrificial supports but…

Pobrania
253
Polubienia
28
Ocena
0
P
Printablestimqui

Eccentric Thumbsticks for PS4 Controller

I've made several variations, let me know which suits you best. Based on your feedback I am ready to create additional variants. The main idea is that eccentric thumb position still works and could be better accesible (even for people…

Pobrania
251
Polubienia
74
Ocena
3,67
P
PrintablesEarthworm_Jon

Xbox One Thumbstick Grip

A replacement grip for an official Xbox One controller thumbsticks. Please note that this is the grip only, it does not replace the whole thumbstick assembly. I printed this in Varioshore TPU at 220C.

Pobrania
250
Polubienia
28
Ocena
5
P
Printablesm00nd0gg

Larger Textured Odin 2 Thumbsticks

I printed these in clear PETG with two walls and 20% gyroid infill. They feel good and glow well!

Pobrania
250
Polubienia
14
Ocena
0
P
PrintablesMacmade

DJI Mini 2 Thumbstick Rest

Preview: https://a360.co/34vQfVh

Pobrania
241
Polubienia
76
Ocena
4,5
P
PrintablesUltraMegaPhil

Odin 2 Portal thumbsticks

The existing Odin 2 thumbstick models didn't seem to fit nicely on the stalks on the Portal so I redesigned a new set with a slightly tighter push fit. The main pad will accommodate PS5 thumb grips nicely (see photos) and if you print in…

Pobrania
238
Polubienia
10
Ocena
0
P
PrintablesqueenMaev

Nintendo Switch Joy-con Thumbstick Cover Replacement

Nintendo Switch Joy-con Thumbstick Cover Replacement Why Make Replacements? During an overseas trip, I pulled out my Nintendo Switch and noticed that the silicone cover on one of the thumbsticks had slipped off. I could not find a…

Pobrania
230
Polubienia
16
Ocena
0
P
Printablesmlax

Different PS4 thumbstick addons

Here is a collection of different attachments for a PS4 joystick. Choose one and print it in TPU or any other flexible material. It should be possible to print everything without supports, but the hexagons I would still print with, just…

Pobrania
207
Polubienia
33
Ocena
0
P
PrintablesHenryWong327

Thumbstick Extenders for PS4 Controller

Note: I had to print it at 105% scale for it to fit properly, however I don't know if this is an issue with my printer or controller so I'm keeping it the same size as the model I'm remixing. I've been playing a flight sim recently and…

Pobrania
197
Polubienia
28
Ocena
4
P
Printablestimqui

Click Helper for PS4 Thumbstick

The reach of the thumbstick is reduced a bit, but it continues to work well. You may hear cracking sound - that are the layers of the print (FFF/FDM). The model is quite tiny - would be better to use a SLA printer. The hard the…

Pobrania
196
Polubienia
69
Ocena
5
P
Printablestboss

R36S Retro Console Thumbstick Extender

Upgrade your R36S controller with this 3D-printed thumbstick extender, designed to enhance precision and control in your favorite games. Whether you're aiming for headshots in FPS titles or fine-tuning movements in retro classics, this…

Pobrania
195
Polubienia
29
Ocena
5
P
PrintablesDan Murphy

Textured Ps4 Thumbsticks

Made some thumbsticks to replace my worn out xbox thumbsticks i had on my ps4 controller. I personally love the way these feel. They provide great grip, and feel light seeing as they are made of pla. I printed these with 100% infill with…

Pobrania
179
Polubienia
22
Ocena
0
P
PrintablesOdicky2

Xbox Controller Thumbstick Cap

Print Settings Material: TPU Infill: 20% Supports: I used tree supports so I can get a better finish but they are not needed.

Pobrania
172
Polubienia
25
Ocena
5
P
Printablesgokudo21

gamesir thumbstick

My gamesir T4 thumbstick broke ,couldn't find replacement ,so I made one. print with paint on support without applying the support to the fitting hole. print with 0.2 layer height or lower for smoother print. Edit: updated 14/3/2024

Pobrania
162
Polubienia
9
Ocena
0
P
PrintablesActiveB1t

Thumbstick topper system for multiple controllers

A simple thumbstick topper system to allow you to add different extensions to controllers. Each base has two halves, which slide on the thumbstick and are held together by the topper as it is screwed on top. Tested and designed for the…

Pobrania
157
Polubienia
28
Ocena
0
P
PrintablesInteger

PS5 DualSense Thumbstick Rubber Cap Replacement – Grip Remix

PLA is great for this despite being brittle and not as flexible as PETG. Try the original size (100%) and if its too loose, print it in 2% increments (102%, 104%, etc..) or vice versa for too tight. It should be able to pop just right…

Pobrania
156
Polubienia
9
Ocena
0
P
PrintablesMateusz Pęczek

Moza RS V2 thumbstick cap

Moza RS V2 thumbstick cap replacement. It's narrower at the bottom to allow for wider motion range when your encoders are worn and register signal at the very edge of the movement (like mine). It solves as well the issue of pushed in caps…

Pobrania
155
Polubienia
8
Ocena
0
P
Printableslucas consen

Xbox Thumbstick cap

Thumb cap for a Xbox controller. Made for Flex prints

Pobrania
151
Polubienia
9
Ocena
0

snap assembly thumbstick shell

designed to fit the common HW-504 thumbstick. The thumbstick should snap into place with moderate pressure and hold solid. the shell snaps together as well. There is a base with screw holes just in case your pcb is a different size than…

Pobrania
148
Polubienia
41
Ocena
5
P

Universal thumbstick extension grips (Xbox/Playstation/Nintendo switch)

inspired by SCUF Thumbstick grips and designed to fit controllers for Xbox One, Xbox Series, Playstation 5, and Nintendo Switch Pro Controller (not joycons) No glue is required, but it is recommended Print cap in TPU Support only for…

Pobrania
146
Polubienia
16
Ocena
0
P
PrintablesNone Protrusion

Dualshock 4 controller FPV thumbstick extender

Two part thumbstick extender for game controllers

Pobrania
145
Polubienia
9
Ocena
4
P
PrintablesNathanBlocks

Under-Desk Xbox Series X/S Controller Hanger/Holder (compatible with KontrolFreeks Thumbsticks)

This is a holder for your Xbox controller that mounts to the underside of your desk using double-sided tape (I used 3M tape.) The controller joysticks slide in to hold it in place. Works with KontrolFreek thumbsticks. I used: 0.4mm layer…

Pobrania
144
Polubienia
18
Ocena
0
P
Printableskrx

Joycon/Backbone Thumbstick Replacement

Replacement for just the stick part of joycon or backbone joysticks. I made/tested these for a backbone controller, but from images online the 2 parts inside the joystick that hold the stick look identical for joycons as well. If that's…

Pobrania
144
Polubienia
9
Ocena
0
P
Printablesbenkress

BK Thumbstick Alpha

Like the original creator of this idea... I was tired of the lack of an analog stick for movement on my Razer Blackwidow V3 mini. unfortunately, I was not able to easily find the joystick used in the original design, so I redesigned mine…

Pobrania
139
Polubienia
17
Ocena
0
P
PrintablesRedferne

Dualsense Edge Thumbsticks

Please note first! You need to print this using a very sturdy plastic such as Prusament PC-Blend or use a resin printer. I tried PETG and it was not strong enough. The settings I used. Please flip the model and print top down, those…

Pobrania
139
Polubienia
5
Ocena
0
P
Printablesnivekmai

Wolverine Controller Replacement Thumbstick

Takes a 8x3mm neodymium magnet in the top of the thumbpad (I just had some laying around, but these should work: https://a.co/d/iS8znQm). Split into 2 parts so you can print without supports (note: the collar should be printed with the…

Pobrania
127
Polubienia
13
Ocena
0
P
PrintablesPeachTreesINC

SteamDeck Thumbstick Covers

After installing the Spigen Rugged Armor Protective Case onto my SteamDeck, I noticed the deck sits a bit higher up while in the case and the thumbsticks could be pressed while the case was closed. I designed these cover caps that fit…

Pobrania
127
Polubienia
19
Ocena
5
P
Printablesprojectvanguard

xbox controller thumbstick extender

print settings: at least* 2 perimeters ( for strength ) at least* 2 top layers ( again for strength ) at least* 3 bottom layers ( because of the overhang ) at least* 15% infill , i used gyroid ( to keep the print sturdy) i printed this on…

Pobrania
124
Polubienia
9
Ocena
0
P
Printablesoblivious

8bitdo gamepad thumbstick

Thumbstick Replacement for 8Bitdo Gamepads Tested with SN30PRO, SF30PRO, and SN30PRO+. Features: Hat Options: Available in 4 shapes and 3 sizes. The short hat closely matches the original thumbstick length. All hat lengths can fit the…

Pobrania
122
Polubienia
29
Ocena
5

Analog Thumbstick Topper Collection

These are replacements for the stock thumbstick toppers. You will need to open your controller to remove the existing thumbstick topper to use this. They slide on, a very tight fit, so they will not fall off. If your printer is not dialed…

Pobrania
119
Polubienia
15
Ocena
0
P
Printablesmistrpeter

Azeron Cyborg Thumbstick Restrictor Ring

https://store.azeron.eu/index.php?route=product/product&path=64&product_id=373 The product above. "The restrictor ring reduces the motion range of the thumbstick. Put the ring on the thumbstick and change the movement direction faster…

Pobrania
115
Polubienia
8
Ocena
5
P
Printablesjotafabric

Thumbstick for 8BitDo Ultimate

Nozzle 0.2mm Layer Height 1.2mm

Pobrania
114
Polubienia
9
Ocena
5
P
PrintablesAli

Razer Wolverine v2 chroma -thumbstick replacement

you are going to need a 3x8mm neodymium magnet to place it inside the pocket of thumb stick, i have only tested it on resin 3d printer, should work fine with fdm to

Pobrania
107
Polubienia
7
Ocena
0

xbox thumbstick extension system - accessibility

prints fine on my Mk4s without supports at .15 layer height. My PLA prints were a bit too brittle, I'd recommend other materials such as PETG or PCBlend. ABS would probably be fine This allows for very strong attachments to the thumbstick…

Pobrania
107
Polubienia
14
Ocena
5

Thumbstick custom for Xbox One controller

I made this modular replacement thumbstick for an Xbox One controller, so you can tweak the ends of the sticks to your liking. The model can be printed quickly with any 3D printer. printer: Longer LK4 PRO material: PLA internal density:…

Pobrania
106
Polubienia
19
Ocena
0
P
PrintablesRyan

Asus ROG Chakram Mouse Thumbstick

I have designed a replacement thumbstick for the Asus ROG Chakram mouse. When fitting to mouse, look down the peg hole and notice the orientation of the inner slot and align it with the peg on the mouse. This is to ensure a tight fit.…

Pobrania
104
Polubienia
7
Ocena
0
P
PrintablesAntro

DJI mini 2 (Mavic mini 2) pad Analog Thumbstick mod

Analog Thumbstick modification, for those whose thumbs are sore from this little sharp sticks. 2 part version uses original rubber ring from analog thumbstick (you put it inside the print and then insert stick from bottom up). Can be…

Pobrania
101
Polubienia
33
Ocena
5
P
PrintablesHowlingMad

FlyDiGi Vader 4 Pro Thumbstick Replacement for Xbox Kontrolfreek

Print it with precision settings with layer height as small as possible. My print: Layer height: 0,10mm Infill: 100% Supports/brim: no

Pobrania
100
Polubienia
10
Ocena
0
P
PrintablesBeetleBuild

PS4 Thumbstick Adaptors

This series of models hope to offer a variety of “swap-to-suite” PS4 thumbstick adaptors for adaptive play. *Will likely be adding more/refining models. Open to suggestions, as each persons style of play may vary. - - - Pinwheel - Basic…

Pobrania
98
Polubienia
30
Ocena
0
P
PrintablesKylerb888

PS Vita Thumbstick Extender (95A TPU)

A thumbstick extender for the Playstation Vita Filament: TPU 95A

Pobrania
92
Polubienia
16
Ocena
5
P
Printablesksutty

Ps4 Thumbstick

These should print nice and quick with some good surface detail to help grip. Category: Video Games

Pobrania
88
Polubienia
10
Ocena
0
P
PrintablesOskari Oksanen

Nintendo Switch Joy-Con Thumbstick Cap

Fast-printing replacement part for worn out Joy-Con thumbstick silicone top cap. Based on the original design, but slightly bigger (17mm diameter vs 15mm of the original). Version with grooves for a bit more grip can be found here . Must…

Pobrania
84
Polubienia
8
Ocena
5
P
PrintablesByTommix

Dualshock 4/PS 4 controller Thumbsticks

Easy and fast to print thumbsticks for the Dualshock 4 controller.

Pobrania
84
Polubienia
9
Ocena
0
P
PrintablesCaleb Kraft

Modular thumbstick extension for gamers with physical disabilities

this is a modular system of thumbstick extensions to help people who have physical disabilities. there are multiple parts and pieces available. Start with the reinforced gripper, then add any part on top of that, that you would like. If…

Pobrania
83
Polubienia
23
Ocena
0

Thumbstick for VKB STECS Throttle

A concave thumbstick for replacing the default concave cursor.

Pobrania
81
Polubienia
6
Ocena
0
P
PrintablesDasAmpharos

Hori Split Pad Pro Thumbstick

My dog ate the right thumbstick to my Hori Split Pad Pro. I couldn't find an existing model so I spent some time measuring and modeling to create a replacement part. This took several iterations to dial in the measurements and fix any…

Pobrania
80
Polubienia
8
Ocena
5
P
PrintablesTheOneTrueNick

Convex Xbox 360 Thumbstick Replacement

This project came about after being frustrated with the rubber of these old Xbox 360 thumbsticks disintegrating. I understand that the actual replacements are pretty cheap and available, but I did not need or want to buy 10+ just to…

Pobrania
78
Polubienia
12
Ocena
5
P
PrintablesMaturity

XBox Controller Thumbstick Cozy

When the rubber on the thumb-stick wears down, just print a new one? Clean off all the old rubbery plastic from the thumb-stick first as this is a snug fit so that it does not move around or fall off. Put the cap on one side then ease the…

Pobrania
78
Polubienia
7
Ocena
0
P
Printablesjufy111

PowerA Switch Controller Thumbstick joystick

Replacement thumbstick for PowerA Switch Controller

Pobrania
78
Polubienia
5
Ocena
0

Logitech F310 Gamepad Thumbsticks

I have this gamepad for ages and love it. When thumbsticks worn out, I could not find replacement and tried to model one. At first it had too much friction so i adjusted according to Ender v3 SE. I think it can work with f710 and f510 but…

Pobrania
75
Polubienia
9
Ocena
5
P
PrintablesX0XMONST3RX0X

XBOX high accuracy thumbsticks TALL

XTB09X @XTB09X_395758 is the creator of the XBOX accuracy thumbsticks to the best of my knowledge. it ended up being 6.62 mm taller than the original.

Pobrania
74
Polubienia
3
Ocena
0
P
PrintablesMegaAndy

SF30/SN30 Pro Thumbstick Replacement

My SF30 Pro thumbstick wore out so i decided to draw up a new one. There are two versions: flat and concave. To make up for the material not having much grip i included a bumpy texture to the stick. I find the concave version works…

Pobrania
72
Polubienia
4
Ocena
0
P
PrintablesJack

Thumbstick cap

The centerline allows the bending motion of our thumb joint as your thumb role from one side to the other and act as a hinge (make sure it is oriented orthogonal to your thumb when holding the controller). The elevated sides keep your…

Pobrania
72
Polubienia
17
Ocena
5
P
Printablesmrusk

Thumbstick Handle (+PCB)

A simple thumbstick handle for general purpose use. Gerber data for a small PCB to mount the stick is included.

Pobrania
71
Polubienia
8
Ocena
0
P
Printablesgonztok

BSP D8 Pro Thumbstick

I lost one of the thumbsticks and could not find info online about wich thumbsticks are compatible, so I made this and an Xbox one version. Printed using supports and put thumbgrips on top.

Pobrania
70
Polubienia
4
Ocena
0
P
PrintablesFlyingWagon

Xbon One Controller Thumbstick Extender

I made this to add a little bit more fine control for my thumbsticks. They only fit if the rubber covers on the thumbsticks have worn off, you might be able to rescale it but i dont have another controller to test this. Printed in PETG…

Pobrania
65
Polubienia
4
Ocena
5
P
PrintablesPetri

Dome hats to Xbox controller thumbsticks

Dome hats to Xbox One controller thumbsticks. Very tight fit. EDIT: 2nd iteration added. For some techno-magical reason Microsoft decided to include only one domed thumbstick in Elite 2 controller and the thumbstics from previous Elite…

Pobrania
64
Polubienia
13
Ocena
5
P
PrintablesCrazy Chicken

Xbox one thumbstick [REMIX]

An xbox one thumbstick. The original had some strange pokey things that looked uncomfortable to use. Best with organic supports.

Pobrania
64
Polubienia
1
Ocena
0
P
Printablesmario

Nintendo Switch 1 thumbstick grips

these are stick grips to enhance your control of the switch. there are 2 designs, one with max grip and one with a smiley face. this model is also on my cults 3d account, @jebronlames

Pobrania
62
Polubienia
6
Ocena
0

Tiny thumbstick case (psp thumbstick)

uses this exact model https://www.adafruit.com/product/444

Pobrania
62
Polubienia
28
Ocena
0
P
PrintablesBrandon Kish

XBOX Thumbstick Rubber Replacement

This is a replacement part for the rubber that wears off the thumb sticks. This REPLACES the original rubber. I have had my XBOX one controller long enough that my thumbs have warn through the controller and it fell off completely. The…

Pobrania
60
Polubienia
1
Ocena
0
P
PrintablesHarry_de_photo

ps4 thumbstick joystick extender

hi this is my ps4 controller joystick extenders i noticed that the ones that i could find on this website were wayyy to long for me so i created one for myself i made this, so please give me some credit for it, all you have to do is write…

Pobrania
58
Polubienia
6
Ocena
0
P
Printablespyrho // 25.wf

PSP 1000 raised thumbstick

This is a raised stick for a PSP 1000 style thumbstick/joystick. The original flat stick was too short for my usage. The new one actually yields more control on the movement. Print Settings Printer Brand: Anycubic Printer: All-metal Mega…

Pobrania
56
Polubienia
11
Ocena
0
P
PrintablesThaddeus Grey

Odin 2 Thumbstick Nubbin'

I was tired of my Odin 2 Mini's right thumbstick getting in the way when I'd go to press Start or Select. It got to the point where I'd pull the right stick off if I was playing a game that didn't use it. I'd printed out these sticks…

Pobrania
52
Polubienia
4
Ocena
0