15 145 modeli
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Author: Unknown Print instructions Print takes roughly 30 minutes (15 minutes on the MK3) at 200 µm layer height.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
You can print it instantly from the included .gcode files or customize your own print. In the attached .3mf file (1mm thickness) the seam is painted in the back of the figure to not affect the appearance and at the same time to be as less…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu
Completely print in place. No breaking it loose, no supports. Added a tree with a star and an ornament tree Nozzle: 0.4mm Layer: 0.2-0.28 (Recommended) Scale it as you like :) Legs from the famous Zou Ghost model by Tower of Creation!…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of ribs (depending on the size of the ball): 10, 14, 18 and 22. Rib width 3 mm. Print the bottom part with a support so that the curve…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu
Christmas tree ornament. 6 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 120 g).
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Prints fine with 10% infill. Print at .10 layer height for maximum detail. Glue together.
Wydruk około 5,62 €–6,87 € nettoWstępna wycena jednego wariantu
Multiple baubles to christmas tree (35 variants and sizes). Prepared for printing in vase/spiral mode - I recommended minimal 0,4 or 0,5 nozzle and set extrusion line width more than 100%. In some parts of baubles (overhangs) i use layer…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Christmas Village from Five Nights Included GCode works great on a Prusa Mini using Eryone white PLA Original Model Drawing also Available.
Wydruk około 19,68 €–24,05 € nettoWstępna wycena jednego wariantu
Christmas bulb. I optimized the model, there is more support in the pictures than would be necessary and I removed part of the fill. Add feedback or pictures for comment :-)
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Wydruk około 8,76 €–10,71 € nettoWstępna wycena jednego wariantu
Christmas bauble display stand. UPDATE - I have redesigned the tree and base so that they slot together better Easy and quick to print with no supports Pictured with a 6cm bauble but can easily be scaled up or down. Let me know in the…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Wydruk około 10,74 €–13,13 € nettoWstępna wycena jednego wariantu
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Instructions Install OpenSCAD (don't worry it's free and simple) Download NameTagGenerator.scad (below) and open it Edit name variable and then hit F5 followed by F6 (render), finally export the .STL file. Open NameTagGenerator.3mf…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Cookie cutter for Christmas gingerbreads. Snowflake is raised by 4-5mm depending on your scaling to be “printed” on top of the glove. Update 11/12/2022 I uploaded another model with slightly increased height of the snowflake. Use…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Print 0.16mm, might need supports or maximise cooling fan.
Wydruk około 5,57 €–6,80 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
I specialize in creating custom lithophanes, enjoy! 100% infill Supports drawn on only around bottom of bell Using Eryone White PLA with 0.2 quality settings
Wydruk około 3,05 €–3,72 € nettoWstępna wycena jednego wariantu
This is a multimaterial remix of Articulated Christmas Toys by bq3D ( https://www.thingiverse.com/thing:1168292 ) These are relatively easy prints that print in place without support. If your first layer adhesion is a little low, a brim…
Wydruk około 18,45 €–22,55 € nettoWstępna wycena jednego wariantu
'Twas the night before Printmas, when all through the house Not a peripheral was stirring, not even a mouse; The filament were hung by the printer with care, In hopes that St. Josef soon would be there… It's that time of year again. When…
Wydruk około 3,34 €–4,08 € nettoWstępna wycena jednego wariantu
Customizable battery powered Christmas tree bauble. Featuring Snowman and illuminating Lamppost. Print instructions I've designed to bauble to use as little supports as possible. There are only 2 files that require supports: Top and…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Simple Vase Mode Christmas decoration with traditional mounting hole. Take the mounting wire and cap of an old or broken Christmas ball and insert it in the cylinder. Available for 8mm, 10mm, 12mm and 16mm mounting cylinder. I used 8mm.…
Wydruk około 4,40 €–5,38 € nettoWstępna wycena jednego wariantu
Printed on my Creality Ender 3 S1 with following settings: Mode: Vase mode Layer height: 0,16 mm Material: White PLA
Wydruk około 2,33 €–2,84 € nettoWstępna wycena jednego wariantu
🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Weihnachtskarte zum heidnischen Julfest (heutiges Weihnachten 25.12.) Ein muß für echte Vikinger-Fans gedruckt mit Sunlu WOOD low temp Filament Design by Dennis' Heimwerkstatt
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
Cats natalizio
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
A modification of my original model. This one is enlarged to 80 mm height to the size of a banknote. If your Christmas presents also include money you can hide it here and hang it on the tree. Of course you don't have to print the bottom…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Conically sliced (16°) Christmas tree for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Death Star Ornament The model comes in a big size, so you can modify it to fit your tree style or use the bottom as a bowl. It was printed in 40% and 50%, it worked great. Once the bowl print is ready I will share the results. There is a…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
A Little tree that can be used as a Christmas tree or also for model landscapes. The tree is in its normal size 45mm / 1,77 Inch tall. Print instructions Print the file in 0,2 mm layers. After printing the support-cone has to be removed.…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
Looks good with 1 or 5 levels. 5% infill is enough. Buy me a coffee
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
After a year, Christmas is coming again, so I made a new Christmas bell pattern to decorate your Christmas tree. The bell also has a heart, it is printed print-in-place. You can also scale it Christmas bells collection :…
Wydruk około 1,34 €–1,63 € nettoWstępna wycena jednego wariantu
You can edit text with free software Autodesk Fusion 360. To edit text download .RAR file and follow instructions in HOW-TO PDF. Personalized Christmas Card is suitable for C6 envelope 114x162mm. Tips: - Print STL file if you do not want…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
---------------------- ONE SERIES, ONE FAMILY Adult model but in standing position: Holiday Christmas Deer - Low Poly Adult model but in laying position: Laying Christmas Deer - Low Poly Youngster model: Youngster Christmas Deer - Low…
Wydruk około 3,29 €–4,02 € nettoWstępna wycena jednego wariantu
I design a christmass decoration for the tree of sewing addicts
Wydruk około 0,56 €–0,68 € nettoWstępna wycena jednego wariantu
Cylinder Mazes by 3DFabXYZ.com With 3 different Christmas themed Lids. Are you looking for an unusual gift idea? Or a unique toy for someone special? Do you like solving puzzles? For a truly multi-functional object, 3DFabXYZ is proud to…
Wydruk około 8,08 €–9,88 € nettoWstępna wycena jednego wariantu
This is a small remix of Flexi Rex , adding a loop and the Clip on Holiday Hat . 2-3mm satin ribbon (available at craft/hobby shops) is best for the making loops to attach these to a tree. Wire ties (the type that bind new cables) is OK,…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
A couple of small ornaments to decorate the Christmas tree vol.2 Other decorations: https://www.printables.com/cs/model/93356-christmas-decorations
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Halloween Pumpkin Nightmare
Wydruk około 2,16 €–2,65 € nettoWstępna wycena jednego wariantu
Our new foldable Christmas tree! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
7 leds to be silicone rubber attached behind each pine tree across the top and one centered above Buck aimed at moose. Total of 8 leds on 6v battery power { 2 - 3v coin cells in series} connected to (4 pair of LEDS wired in parallel to…
Wydruk około 4,80 €–5,87 € nettoWstępna wycena jednego wariantu
A geometric Christmas tree, printed in vase mode! Nice to have on your desk during the dark december month! By removing the bottom layer you can easily put an LED string in like shown on the pictures. The peak is printed separate. Also…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Nightmare Cupcake from Five Nights at Freddys.
Wydruk około 21,61 €–26,41 € nettoWstępna wycena jednego wariantu
Winter, and Christmas in particular, is a time for coziness and tranquility, and nothing achieves this better than lights and lighting. With this atmospheric and festively decorated fireplace on the shelf or windowsill, the Christmas…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Add some festive flair to your Christmas tree with this unique 3D-printed candy cane ornament! Designed with flexibility and articulation, it brings a fun twist to the classic holiday symbol. Choose between two versions: one with a hook…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
This is Jack Skellington ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
You can print this without support. I printed it on the XL but it should be fine on the MK4 or other printers as well. If you scale it down, it's also a nice Christmas ornament. If the hole is too big you can add a modifier in the slicer.…
Wydruk około 2,95 €–3,60 € nettoWstępna wycena jednego wariantu
Christmas tree ornament. 8 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 100 g).
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…
Wydruk około 2,98 €–3,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
https://www.buymeacoffee.com/maxt ---------------------- 8 different pieces - Mix and match as you please, or print'em all! :) Flat bottom to ensure that the napkin ring doesn't rotate on the plate. This set goes well with another way to…
Wydruk około 3,98 €–4,87 € nettoWstępna wycena jednego wariantu
Stamp for delicious cinnamon butter cookies. Recipe: Ingredients 250 g plain flour 90 g sugar flour 125 g butter 1 pc egg 2 tea spoons snail honey 1/2 tea spoon ground cinnamon Mix all ingredients and prepare a smooth dough (possibly with…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Small stars twinkle in the sky, as they do each day every day. So inspired by that we created a new pot design! Merry Christmas and Happy Holidays! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
Wydruk około 2,63 €–3,22 € nettoWstępna wycena jednego wariantu
Inspired by the Raylite plastic Christmas church. My Bubba always put one of these out at Christmas. I have no idea whatever happened to hers so I decided to recreate my own. I pieced this together from images I found on the net. Not an…
Wydruk około 3,10 €–3,79 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of double ribs (depending on the size of the ball): 6, 10 and 14. Rib width 3 mm. Print the bottom part with a support so that the…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena jednego wariantu
Something special - a small amazing shiny star that has fallen right from the sky. A small thank you to all of our supporters and the people who downloaded our models. We reached lately 100 000 downloads which is just so amazing for us!…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- This model goes well with another way to decorate the napkins - Christmas Napkin Ring Set, 8 different pieces Usage: Place it on a maroon napkin for your festive Christmas table…
Wydruk około 2,10 €–2,57 € nettoWstępna wycena jednego wariantu
I wanted to share my first model with you. Created from a paper sketch and modeled in Fusion 360 and sliced in Prusa slicer for a Mini+. This is a 3-wall cutter with a beveled edge to make it more comfortable for holding. The 16mm cutter…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
This is Zero ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa MK2.5 with…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
I published this model originally on Thingiverse and Thangs a few months before joining Printables. Now that it's the Christmas time, I wanted to publish it here, too. The photo shows my latest print of the ornament sliced with…
Wydruk około 4,48 €–5,48 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
8 variations of Christmas tree ornaments. Single and double ribbing. 3 sizes: 40, 60 and 80 mm. Print with supports on the plate to increase print stability.
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
DISCLAIMER: I did not produce the original design for this clock. I had a version of this clock that was laser cut from a vinyl record that fell off the wall and shattered. This design was produced by taking photos of each shard and…
Wydruk około 6,30 €–7,70 € nettoWstępna wycena jednego wariantu
This can be printed with multiple colours even with a single extruder something you need for these holidays
Wydruk około 2,61 €–3,18 € nettoWstępna wycena jednego wariantu
NOTE! The whiskers could not be printed! I printed here with tree supports and i used an AMS for the multicoloring. I hope that's it is a lovly Christmas Gift or a Cute Decoration! Check out my other models HERE ! Enjoy and have a great…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Ein paar einfache “Fruchtzwerge-selbstmach-Eis-Sticks” im Smilie-Design. Da bei jeder Packung immer nur einer dabei ist, kann man immer Ersatz gebrauchen. Ich habe das Ganze mit Prusament PETG gedruckt, wegen der Lebensmittelechtheit und…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mount your T818 wheel to the wall or your rig. Insert a quick turn to the right will click it in and lock it in place. To remove, turn the wheel 20 degrees to the left and pull straight out. The notches in the face indicate the lock and…
Wydruk około 5,72 €–6,99 € nettoWstępna wycena jednego wariantu
This is Sally Skellington ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
The sphere with a diameter of 55 mm consists of 30 pieces. Decoration can also be folded from a different number of pieces, for example 6, 12, 15, 24 and others as well.
Wydruk około 1,98 €–2,43 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Caketopper "Frohe Weihnachten" für Kuchen oder Torten zu Weihnachten als schöne Dekoration. Caketopper "Frohe Weihnachten" for cakes or tarts for Christmas as a nice decoration.
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
Christmas Festival Schwibbogen
Wydruk około 7,67 €–9,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy to print Christmas Ornament Settings: 0.2 quality 100% infill PLA No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Set of Christmas decorations. The set consists of ornaments in the shape of carp, angel, tree, cross, comet and bell. The individual decorations can be decomposed into a 3D shape and then look really good on the Christmas tree.
Wydruk około 3,00 €–3,66 € nettoWstępna wycena jednego wariantu
Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
History Hernhutters The Hernhutters were brothers who originally (anno 1722) came from the former Czechoslovakia, but were persecuted there, fled and ended up in Hernhut in Germany. In that town they built a settlement that has grown into…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
This is one of the easiest of my models to print. You will need supports. Use grid supports on build plate only. An overhang angle of 40 degrees works very well. The loop at the top prints very well without supports. I recommend adding a…
Wydruk około 2,94 €–3,60 € nettoWstępna wycena jednego wariantu
OUTDATED : see https://www.printables.com/model/1038392-weihnachtsschmuck-glocke-2024-viele-sprachen-chris Not much to tell - it's selfdeclaring. I printed with a 0.4 mm nozzle and 0.15 mm height. No supports needed Created with OnShape →…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Easy to print - Easy to handle Perfect for openeing your boxes
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
6mm keyring hole 4.8mm tall (4mm base and .8mm color switch)
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Isnt this a nice little box? It is! So, lets unscrew these two nuts, take the cover off, and... ... find 30 more Nuts !!! \o/ This is a box for a giftcard, that has a slightly annoying touch for the gifted. This is not exactly my idea; on…
Wydruk około 1,06 €–1,29 € nettoWstępna wycena jednego wariantu
Meet the Mini Christmas Troll Buddy — the mischievous little member of the Mini Buddies family! 💚 Height: just 14 mm 🎁 A playful Christmas troll — the cheeky gift thief of the holidays ✨ Full of festive charm and tiny details, perfect for…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Batman Batarang from Justice League Movie. You need to use the color-change function and print two of them and glue them together. Design created in Onshape by myself. Used Filament is PLA Galaxy-Black from Prusament and a silver standard…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena jednego wariantu
Ho Ho Oops! 🎄 Imagine a Christmas tree so incredibly knotted/tangled that even Santa gave up trying to fix it - and that’s exactly how this design came to life! A tree full of loops, twists, and knots that look as if one of the reindeer…
Wydruk około 2,67 €–3,27 € nettoWstępna wycena jednego wariantu
An earring in the shape of the deathly hallows with an interior spinning Sorcerer's Stone. This model comes in 2 versions, one where the sorcerer's stone moves freely up and down (v1) and one where the sorcerer's stone is prevented from…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Meet the Mini Geometric Christmas Tree — a sleek and modern take on the classic holiday symbol! 🎄 Height: 15 mm ✨ Perfect for minimalist Christmas setups, dioramas, or small-scale decorations 🖤 Clean lines and geometric design make it a…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Schwibbogen mit Ständer.
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
I made this Christmas Ornament for my Christmass tree :). It's pretty easy to print. And sturdy Just use Vase mode. I was printing in on 0.2 layer. You can use brim to hold it better to the build plate Also I uploaded newer version of…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
-prepared for MK4 with MMU3 -MK4 noMMU and Prusa Mini version prepared as well - only 2 manual filament changes necessary printed on Textured Powder-coated Steel Sheet without problem
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Print as u like
Wydruk około 5,39 €–6,59 € nettoWstępna wycena jednego wariantu
Introducing the Gingerbread Deluxe - where festive fashion meets cookie charisma! Not only does this cheeky sweet sensation have the most stylish Christmas hat on the tree, he also has some serious gingerbread dance moves (articulated).…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Lets commemorate this crappy year! Designed in Fusion360 and printed with 3D Fuel Bone White and Metallic Gold Pro PLA on my MK3S. Print instructions These parts can be printed with very little infill, I think I used 5%. No supports…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Happy Christmas
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: angel bell fish heart santa skate snow glove snowman tree wreath – Czech – Kolekce 30 vykrajovátek na vánoční…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: candle candy church comet glove heart pig present snowman sock – Czech – Kolekce 30 vykrajovátek na vánoční…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
