Toyota Keychain
6mm key ring hole 4.8mm thick
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
- Pobrania
- 604
- Polubienia
- 87
- Ocena
- 5
2008 modeli
6mm key ring hole 4.8mm thick
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Please click if you appreciate my work :) Retro soul in a modern shell. This 3D printable wall-mounted sculpture captures the sharp, unmistakable lines of the Toyota Celica Supra MK2 – a true JDM classic from the golden era of the '80s.…
Wydruk około 12,52 €–15,30 € nettoWstępna wycena jednego wariantu
This is a tire valve cap with a Toyota logo I made to give as a gift. Super easy to print. Color change is at 14.3. You may need to print it with a brim. The pre-sliced file is for 5 caps.
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Print in place Toyota FJ40. printed at .16 layer height %15 infill with PrusaSlicer organic supports. Whatever side the print is oriented may have a rough finish near the hood, unless your supports are dialed in. Model was requested by…
Wydruk około 15,61 €–19,08 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a small storage tray that is meant to sit in the empty space above the gearshift in a 2022/2023 Subaru BRZ and (possibly) Toyota 86 (assuming the interiors are the same). It is meant to add a small amount of storage for something…
Wydruk około 3,08 €–3,77 € nettoWstępna wycena jednego wariantu
3D Silueta Toyota GR86 – Moderní automobilové umění na zeď Vyjádřete svou vášeň pro čistou radost z jízdy! Tento precizně navržený 3D model zachycuje nezaměnitelnou, agresivní a zároveň elegantní boční siluetu vozu Toyota GR86 – jednoho z…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
Toyota Prius center caps to suit factory rims - PLA
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
In this model we have the top 5 car brands sold in portugal. This design is just wall art althought it can be used for other purposes. Download your car logo and stun everyone with your 3D print! More car brands will come in the next…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Toyota LandCruiser FJ40 1977 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 1,59 €–1,95 € nettoWstępna wycena jednego wariantu
Mas modelos en mi perifl
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
This design is based on the original product (reference 050083-10 ) and is specifically made to fit the 500 series Mitutoyo calipers. It is also compatible with calipers that have a 16x3.5mm blade. The model is designed to fit neatly…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
After buying my pickup 5 years ago without a window crank knob I finally decided to fix the problem. Here is my solution to replacing a broken crank knob. Needed material: Qty:1 Window Crank Knob (3D printed) Qty:1 Washer (3D printed)…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
2020 Toyota Corolla 1L Water Bottle Holder. For use with a 1L Camelbak Bottle. Print instructions Category: Food & Drink Summary 2020 Toyota Corolla 1L Water Bottle Holder. For use with a 1L Camelbak Bottle.
Wydruk około 5,72 €–6,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A no-support needed 3D print for a Mitutoyo 6-inch AOS (500-196-30) Caliper Depth Gauge Base / Bridge. Printing Printed with Silver Prusament PLA on MKS+. Print with the widest flat part down to get the most accurate measurements, it will…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Extension for rather small hooks in the trunk of Toyota Corolla TS XII (E210). - version 02 (better fit, more robust). Printing from PETG (or something more durable) recomended. Inspired by https://www.thingiverse.com/thing:5444285
Wydruk około 0,92 €–1,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Toyota MR2 Spyder HVAC knob (This may fit other Toyotas of the same gen, not sure). There is a indication hole, and will work fine as is or can put a small diffusing tape over the back.
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
Remix of Mitutoyo caliper holder by pejvl2000 for Parkside pegboard. Modified for easyer print. Use two M5x8 screws from behind. Compatible with Mitutoyo 500-181-30, shorter and longer version and possibly with other calipers.
Wydruk około 1,31 €–1,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A compact case for Mitutoyo 500-196-30 or CD-6" ASX caliper. Need 2 M2*20 screws and 4 cylindrical magnets with 6mm diameter and 5mm height.
Wydruk około 4,06 €–4,96 € nettoWstępna wycena jednego wariantu
Mich hat immer gestört, dass ich die Hörmann Fernbedienung HSE 4 BiSecure für unser Garagentor in unserem Toyota MR2 W3 im Handschuhfach suchen musste… Inspiriert von einem bei Printables gefundenen Cover für diese Fernbedienung habe ich…
Wydruk około 1,54 €–1,89 € nettoWstępna wycena jednego wariantu
If you have found this model I guess like me you have broken your antenna while washing the car, moving a cover or just looking at it the wrong way. So I got replacement then modeled it the best I could to match to the original toyota…
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
A Scion FRS / GT86 / GR86 car badge keychain. Print with PLA or PETG for more durability. Color shift is included in the .gcode at 3mm. Ironing is also enabled to smooth out the top layer. .stl is included if you want to re-slice with…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Keychains in various versions. Keychains modeled after the seat belt alarm lock Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This knob replaces the bed cleats, adjustable torque knob. This is only the model for the knob itself not the torque spring. Compatible with Toyota Tacoma 2005-2021 models.
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
Since original grocery hooks in the trunk are unusable, I've attempted to create an extender for it. It fits in firmly and now it is possible to hook on the grocery bag. The bag shouldn't be hanging on it, the hook's extender is just to…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Ever been driving in the heat and wanting the cool air coming out for the non existent passenger to actually reach you. Well this adapter should help direct cool air towards your midriff. Print with PETG or PLA depending on your needs…
Wydruk około 3,55 €–4,33 € nettoWstępna wycena jednego wariantu
Toyota MR2 bonnet badge for First Generation/MK1: W10 (1984–1989). Not for use on vehicle. For display only. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Note that the corner locating…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena jednego wariantu
Hello everyone, I present to you the model of the car Tayota GR Supra A90 The model is presented in its original form This model is free and therefore here only the chassis and body with headlights are shown. details of the left side, you…
I originally designed a replacement 3D printed knob for a Smeg oven after struggling to find a replacement. I've since added a total of 7 customisable Knob designs and 5 customisable Inserts that can be mixed and matched to create the…
Designed to print-in-place without support. 0.2mm layer height works well. If you'd like to print the inner part in a softer material like TPU, the step file can be split into 3 parts in the slicer, with a separate lower insert. Tested…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This is the Toyota logo. How I Designed This Imported SVG of official Toyota logo to Tinkercad and resized. Category: Signs & Logos
Summary This is a model of a Toyota Supra MK4 in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate spoiler and big exhaust :) After printing, the model can be assembled with the help of…
Toyota car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.
Update 06.06.2024: Correction of a painting error on the model with black hood. Update 26.05.2024: Added two version for 4-color multicolor print (AMS & MMU). With white hood and with black hood. Summary This is a model of a Toyota…
STL/Bambu 3MF included.
This is a low-poly model of the legendary 1994 Toyota Supra. It captures the classical sleek design of the car in a low-poly form and features rotating wheels. The spoiler prints good without a support but it might benefit from a tree…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Introduction The Dakar rally is an over two week long endurance race with a total length of up to 8000km. Introduced in 2022, the Hilux T1+ is a purpose-built rally truck built for the Dakar rally. By 2025 it has certainly proven itself,…
USE AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED That being said enjoy! (I've been told that it does not work in a Toyota Toacoma)
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…
This is a high poly replica of the new 2020 Toyota Supra modeled in Blender over about 43 hours. Parts optimized for 3d printing are coming soon! Update 1- 3D printable files are available for a 1/16 scale model. Print instructions…
This is a replacement batter cover or cap for Mitutoyo Calipers model 500-138. The identified Thingiverse model was used as a baseline for this remix. I used eSun PLA+ as filament and it seems to be robust enough for the small clips on…
Just bought a used Toyota Tacoma and the trailer hitch was a bit rusty and ugly. Of course it was missing the OEM plug / hitch cover but I had one from my older totaled Tacoma. I ended up measuring everything off the original OEM hitch…
Adjusted the design from @seb_241995 to fit Mitutoyo calipers with the side scroll wheel. Fits perfect !!
This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…
This gas cap holder fits gen 3 Toyota Tacomas. I recommend printing it PETG or some other material that can survive higher temperatures. PLA will probably warp and become brittle over time.
This is an oil funnel used for toyota vehicles. It should fit all toyotas with a threaded oil cap.
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Please click if you appreciate my work :) A 90s legend reimagined as a modern wall-mounted sculpture. This stylized Toyota Supra MK4 is the perfect blend of iconic JDM spirit and contemporary design. Created as a 3D printable wall decor,…
Its a model of this awesome japanese car.
I printed a skull found on thingiverse (https://www.thingiverse.com/thing:518109/files), and we got the idea to use it as a gear shifter knob for my car, as I had already woodturned a shifter a while back. The skull is scaled to 40% of…
Toyota keychain, can be printed with multi material.
My cars Toyota emblem came off and we needed to buy a new one, but they are so expensive! So I modeled one instead! It fits great but needs some glue to be held in. I would recommend using grey filament or painting it grey. I haven't…
Just a keyring for my car Category: Automotive
Cup holder for mid 2000s Toyota Corolla (E120), My friends car didn't come with cup holders, so designed this to fit in the centre console, it has a weird cubby with lid next to the handbrake where you would think they would put cup…
The 2024 Land Cruiser is a bit short on storage, especially if you have the Cool Box center console. This is a removable tray insert that still leaves enough space below for 12oz cans. Print in whatever material you have confidence can…
This is a coin holder replacing Toyota Switch blank, this holds 14 coins in total **This fits only the Tall size of Toyota Switch blank (40x22 mm ) -There is two designed diameter -For 25mm Dia (or smaller) coin. -For 27.5mm (or smaller)…
Designed to print-in-place without support. 0.2mm layer height works well. I printed mine out of PLA and it fits snug without play. If you'd like to print the inner part in a softer material like TPU, the step file can be split into 4…
MItutoyo 500-184-20 Battery Cover
Toyota Corolla AE86 Trueno, famous from Initial D Print the car and 4 wheels, might need supports for the exhaust tip Original model from sketchfab: https://skfb.ly/o8CNI Check out my print-in-place optimized version of an AE86:…
Print the toyota logo a little smaller (I have it set up on the 3mf file it should be 49.94mm on X) Sand them smooth or add resin and paint in silver and black or whatever you like Glue them together Clip it in and enjoy! I will upload…
You need some M6x16 or M6x20 Socket head cap screws. The screws of the Trunk lock wont fit. Update 17.05.2025: Version 3 with stronger screw points.
Broke the pegs on my toyota logo, so reverse engineered it and made my dual color version. Exact copy with the 3 pegs to make it click in. Just glue the parts together after printing. Like my work?? Please consider donating me a coffee :)…
Toyota supra mk4 This 3D model is a flat, minimalist silhouette of the Toyota Supra MK4, designed as a decorative piece. The model represents a stylized front view of the iconic sports car, emphasizing its recognizable headlights,…
Remix of Desert Dave's "Taco Sauce" holder for MMU2S. Intended to be printed face-down to minimize support material and purge tower height. I used Prusament Chalky Blue and jet black. It's not a perfect match for the Cavalry blue, but…
This is a print in place MK4 (MKIV) Toyota Supra. It prints on its side with print in place wheels that move freely when printed! Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more…
A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…
Update: 13.10.2026 – expansion of the list of supported and community-tested models. 6,10.2026 “Thanks to the community, the models have been tested — see details below. Thank you for the feedback.” @AGB84 - Golf 7 @rpeservis - Skoda…
Modified to fit 2nd gen tacoma. slide in the tab on the right side first to get a firm hold and then use the screw to secure it in place.
These mounts allow the replacement of the stock dash speakers with 3.5" aftermarket speakers. I designed these around the Infinity Reference REF-3022cfx 3.5" speaker - compare your speaker specs to these to see if the mount might work for…
This meticulously designed 3D printed shell of the Toyota Supra RZ can be created using either FDM (Fused Deposition Modeling) or resin printing techniques, offering flexibility to hobbyists and enthusiasts. It captures the sleek,…
You should print in PETG just for heat/durability purposes. There are two versions one that just slides in (minimal) then another that utilizes the screw hole and can be mounted via Toyotas screw (no drilling or modification needed).
Air Went Blade Replacement Part I have a 2005 Toyota Corolla in which the previous owner used to attach his phone onto the AC air went blades and sucessfully broke two of them. I didn't find the blades selling anywhere and replacing the…
I'm not a fan of wasted time or material so I remixed this Mitutoyo 6 in caliper holder to save on both. There is still a small storage bin in the bottom to hold extra batteries or anything else of a similar size. Change log v1 (…
Body of a Yota Pre-Runner, Sized to fit 1/24 and 1/10
Celebrate the legendary status of Japanese automotive performance with this 3D printable STL model of the Toyota Supra MK4. This iconic JDM sports car model is perfect for automotive enthusiasts and fans of tuner culture, showcasing…
This is a remix of xdcmx's key fob enclosure to accommodate the panic button on the back of the Toyota key fobs. Prints flat without supports. This should replace the plastic enclosure on TOY44 and TOYMT40 key fobs. I broke the plastic…
Note: a revised overkill version exists now: Original model: Includes a model for the front and rear seats. EDIT: Sep. 8, 2024 - Added a “rear middle seat” hanger with enough droop to reach under the middle seat head rest. Headrest peg…
Basically Remix from https://www.printables.com/model/432569-digital-caliper-case-mitutoyo/comments. Added more space for Thumbwheel and changed the text font. Tested on Mitutoyo 500-196-30.
For those of us with a 5th generation 4Runner, you know that little cubby space by the shifter is not very useful, because stuff flies out. I made a little cubby drawer that will fit in that space, that is held in place by friction. This…
I used these to block the glare from the rear license plate lights. It shoots up a bright glare especially at night making it impossible to see. Use 3M waterproof tape, tape it to the back then add these to your rear bumper on the top…
A sloppy attempt at one of the emblems on the early model FJ40 Land Cruisers. I traced a photo of the emblem in inkscape, exported layers to DXFs and imported them into OpenSCAD to union/difference the appropriate layers. Later models of…
I'm sharing this for non-commercial / sale use. Please don't steal and sell my design. I've seen numerous cup holders for the land cruiser fj80 and I figured I would design my own since I have a 3D printer sitting in the office. Included…
50mm x 13mm No Supports 4.8mm thick (4mm base and 0.2mm color change)
These are bins designed specifically to hold Mitutoyo digital calipers for Zach Freedman's Gridfinity system. I designed them around models 500-195-30 (4"), 500-196-30 (6”), and 500-197-30 (8”), but they may also fit other brands or…
Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC
My Toyota Tacoma shifter got scratched up and the leather peeled away. It looked ugly, but most importantly the 6-speed tree illustration was no longer visible for people who occasionally drive my truck and can't find reverse. I bought a…
There is a Toyota floor mat clip out there, but that was way too big so I decided to create my own model, dimensions should be close to a stock one. I would print this one laying on its side with some tree support and 100% infill.
Simple snap on for the protector panel in the back of a Rav4. Went multiple time to the dealer and never has the piece so decided to create and print my own :). This is more sturdy than the one from the dealer. Use ABS since this is meant…
Eine Radnabenkappe mit Toyota Logo Wheel center cap with Toyota logo
assembly part 1: part 2: part 3: part 4:
The Tundra and Sequoia vehicles have a recall on their volume knobs. They are hard to get at the moment so here is one that will help until they are available. I recommend ASA and 100% infil.
Pinched Toyota body for 1/10th scale, made the roof taller.
Do you fill your Tacoma with petrol or Taco Sauce. Well? Tell the world!
This is a remix of Dendeba's AE86, it was perfect size for a keyring so I added a small loop on the model which works perfectly! Link to Denbeda's original model - https://www.thingiverse.com/thing:4914137
Doodled up a new shift knob for my 4th gen 4runner. Design cues from the Teton Workshop shift knobs with some added features. May also fit other Toyotas that have an M8x1.25mm threaded shifter rod. The depth of the hole is 2.5" so check…